Waterproofing and tiling in public showers and swimming pools

Duschen schwimmb

In commercially used wet areas, a particular type of waterproofing is necessary due to the large amounts of water present. The use of bonded waterproof membranes (including the adhesive for the tiles) protects all building components. All inserts (pipe penetrations, floor drains, shower fixtures etc) must be technically correctly integrated into the waterproof membrane.

Print page
Grundieren PRIMING

Solvent free universal primer, water and alkali resistant

Ausgleichen LEVELLING

Non-sag, cement-based, rapid hardening, polymer modified, low shrinkage and creamy smoothing compound, 2 – 50 mm

Water repellent, rapid hardening screed mortar with high strength

Smoothing compound from 2 – 30 mm


One component flexible waterproof slurry, wall/floor

Flexible, mineral-based, vapour permeable waterproof slurry for areas with increased demands in interior and exterior areas

Fabric reinforced sheet style bonded waterproof membrane

Waterproof tape for bridging bay edge joints and connections


Grey, highly flexible adhesive for interior and exterior use

Mineral-based, flexible adhesive

Lightweight, low dust flexible adhesive for thin, medium and thick bed installation techniques

Accelerated hardening flow bed flexible mortar

Flexible natural stone adhesive


Cement-based, water impermeable grout with improved mechanical and chemical resistance for joint widths from 3 – 20 mm

Rapid hardening flexible grout, 3 – 20 mm joint width

Mineral-based multi-function flexible grout for tiles, natural stone and other finishes from 1-10 mm joint widths with FAST TECHNOLOGY

Silicone sealant for movement joints

Silicone sealant for use with natural stone