Installation on moisture resistant plasterboard and building boards


Moisture resistant plasterboard is only suitable as a substrate for exposure class A0, i.e. for moderately wet wall areas in rooms where splash contact and cleaning water is present, e.g. domestic bathrooms. The building board is to be protected against moisture damage with a bonded waterproof membrane.

Print page
Grundieren PRIMING

Solvent free universal primer, water and alkali resistant


Flexible, mineral-based, vapour permeable waterproof slurry for areas with increased demands in interior and exterior areas

One component flexible waterproof slurry, wall/floor

Fabric reinforced sheet style bonded waterproof membrane

Brush, roller or trowel applied waterproof coating for walls and floors


Lightweight, low dust flexible adhesive for thin, medium and thick bed installation techniques

Creamy consistency flexible adhesive

Grey, highly flexible adhesive for interior and exterior use

Flexible natural stone adhesive


Simple to use grout, up to 6 mm joint widths

Mineral-based multi-function flexible grout for tiles, natural stone and other finishes from 1-10 mm joint widths with FAST TECHNOLOGY

Silicone sealant for movement joints

Silicone sealant for discolouration-free elastic jointing