Waterproofing and tiling in private bathrooms

Bad privat

Due to the joints, tiled finishes are not impermeable to water. Therefore in wet duty areas they require waterproofing in order to protect the substrate against moisture.

Print page
Grundieren PRIMING

Solvent free universal primer, water and alkali resistant

Ausgleichen LEVELLING

Smoothing compound from 2 – 30 mm

Non-sag, cement-based, rapid hardening, polymer modified, low shrinkage and creamy smoothing compound, 2 – 50 mm


Dimensionally stable and compression proof de-coupling board with impact sound deadening properties in 4 mm, 9 mm and 15 mm thickness


Brush, roller or trowel applied waterproof coating

Fabric reinforced sheet style bonded waterproof membrane

One component flexible waterproof slurry, wall/floor

Flexible, mineral-based, vapour permeable waterproof slurry for areas with increased demands in interior and exterior areas

Waterproof tape for bridging bay edge joints and connections


Flexible adhesive with especially good non-slip

Lightweight, low dust flexible adhesive for thin, medium and thick bed installation techniques

Grey, highly flexible adhesive for interior and exterior use

Flexible natural stone adhesive


Water- and dirt-repellent grout, up to 6 mm joint widths

Rapid hardening flexible grout, 3 – 20 mm joint width

Mineral-based multi-function flexible grout for tiles, natural stone and other finishes from 1-10 mm joint widths with FAST TECHNOLOGY

Silicone sealant for movement joints

Silicone sealant for use with natural stone