back

Installation on concrete (> 6 months)

Beton

Before waterproofing and tiling concrete substrates it is mandatory to prepare the substrate using shot blasting, high pressure washing or similar techniques in order to remove laitance layers present.

Print page
Grundieren PRIMING

Solvent free universal primer, water and alkali resistant

Ausgleichen LEVELLING

Smoothing compound from 2 – 30 mm, interior and exterior areas

Non-sag, cement-based, rapid hardening, polymer modified, low shrinkage and creamy smoothing compound, 2 – 20 mm

Entkoppeln DE-COUPLING/INSULATION

Thermally insulating impact sound deadening and de-coupling board, 4/9/15 mm

Abdichten WATERPROOFING

Flexible, mineral-based, vapour permeable waterproof slurry for areas with increased demands in interior and exterior areas

One component flexible waterproof slurry, wall/floor

Fabric reinforced sheet style bonded waterproof membrane

Verlegen TILE INSTALLATION

Creamy consistency flexible adhesive

Rapid hardening, highly slump resistant flexible adhesive for interior and exterior use

Accelerated hardening flow bed flexible mortar

Flexible natural stone adhesive

Verfugen GROUTING

Rapid hardening flexible grout, 3 – 20 mm joint width

Mineral-based multi-function flexible grout for tiles, natural stone and other finishes from 1 to 10 mm joint widths, with FAST TECHNOLOGY

Silicone sealant for movement joints

Silicone sealant for discolouration-free elastic jointing