Installation on green cement-based screeds (CT) and concrete (> 28 days)

Zementestrich jung

Through the use of the highly flexible tile adhesives UNIFIX-S3 / UNIFIX-2K, tiles can be installed on green cement-based screeds as soon as they are ready for foot traffic. When installing on green cement-based screeds make allowances for the fact that the binding process of the screed is not yet complete and will consequently have lower strength. No heavy loads may be placed on the substrate. Laitance layers must be removed before tiling. When installing natural stone, only use materials which are not sensitive to discolouration or deformation.
NOTE: Exclude moisture rising from the substrate. This type of installation does not conform to recognised technical regulations and is to be contractually declared separately.

Print page

Flexible, mineral-based, vapour permeable waterproof slurry for areas with increased demands in interior and exterior areas


Two component, water impermeable, frostproof flexible adhesive for heavy duty tiled finishes

Highly deformable flexible adhesive for heavy duty areas to compensate for substrate stresses

Highly deformable, rapid setting flexible adhesive for heavy duty areas to compensate for substrate stresses


Rapid hardening flexible grout, 3 – 20 mm joint width

Mineral-based multi-function flexible grout for tiles, natural stone and other finishes from 1-10 mm joint widths with FAST TECHNOLOGY

Silicone sealant for movement joints

Silicone sealant for use with natural stone