back

Installation on lime sand blocks, bricks and aerated concrete masonry work

Mauerwerk

Blocks with binders (e.g. lime sand blocks) must have reached an age of at least 6 months before tiling (6 months after the production of the block) in order to prevent damage to the tiles, which can be traced back to shrinkage stresses.

Print page
Grundieren PRIMING

Solvent free universal primer, water and alkali resistant

Ausgleichen LEVELLING

Non-sag, cement-based, rapid hardening, polymer modified, low shrinkage and creamy smoothing compound, 2 – 50 mm

Abdichten WATERPROOFING

Flexible, mineral-based, vapour permeable waterproof slurry for areas with increased demands in interior and exterior areas

One component flexible waterproof slurry, wall/floor

Fabric reinforced sheet style bonded waterproof membrane

Verlegen TILE INSTALLATION

Lightweight, low dust flexible adhesive for thin, medium and thick bed installation techniques

Deformable adhesive

Grey, highly flexible adhesive for interior and exterior use

Flexible natural stone adhesive

Verfugen GROUTING

Simple to use grout, up to 6 mm joint widths

Rapid hardening flexible grout, 3 – 20 mm joint width

Mineral-based multi-function flexible grout for tiles, natural stone and other finishes from 1 to 10 mm joint widths, with FAST TECHNOLOGY

Silicone sealant for movement joints

Silicone sealant for discolouration-free elastic jointing