back

AQUAFIN-1K-PLUS

1 component cementitious waterproofing slurry with optimised setting

  • Rigid mineral-based waterproofing slurry
  • highly sulfate resistant
  • Resistant to frost and ageing
  • watertight
  • Vapour permeable
  • Can be painted, filled and sprayed
bag AQUAFIN-1K-PLUS 1 component cementitious waterproofing slurry with optimised setting by SCHOMBURG

What is AQUAFIN-1K-PLUS used for?

  • For presealing building components in direct ground contact for water impact classes W1.1-E, W1.2-E and W4-E
  • As retroactive building waterproofing in accordance with WTA datasheet 4-6
  • for waterproofing containers and basins (W1-B, W2-B in accordance with DIN18535)
  • for the repair of sulphate-damaged substrates
  • for process and waste water tanks
  • for interior and exterior use
  • For walls and floors

What are the advantages of AQUAFIN-1K-PLUS?

  • Processing time approx. 30 minutes
  • Can be recoated after approx. 90 minutes - even under unfavorable ambient conditions
  • watertight
  • Good adhesion to the substrate under dry, wet and freeze-thaw conditions
  • Improved early strength

Consumption of AQUAFIN-1K-PLUS

3.5–5.3 kg/m²

Article-No. Packaging size Color Unit/Pallet Repackaging
204249-001 25 kg, bag Grey 42 -

Downloads for AQUAFIN-1K-PLUS

Brochures
Folder_AQUAFIN-1K-PLUS - Dries faster. Easy to overcoat. Folder_AQUAFIN-1K-PLUS - Dries faster. Easy to overcoat.
Safety Data Sheet (SDS)
SDS_Aquafin-1K-PLUS_-_204249_(2)EN_GB SDS_Aquafin-1K-PLUS_-_204249_(2)EN_GB
Technical Data Sheet
Technical Data Sheet_AQUAFIN-1K-PLUS Technical Data Sheet_AQUAFIN-1K-PLUS