Installation on gypsum plaster (mortar group PIV to DIN 18550)

All plasters beneath ceramic tiles or natural stone must be struck off tightly with a straight edge. The surface must remain rough and may not be smoothened or felt boarded. Gypsum plaster is only suitable as a substrate for domestic bathrooms.

Print page

Rapid drying, quartz filled dispersion primer for absorbent and non-absorbent substrates


One component flexible waterproof slurry, wall/floor

Fabric reinforced sheet style bonded waterproof membrane

Flexible, mineral-based, vapour permeable waterproof slurry for areas with increased demands in interior and exterior areas


Grey, highly flexible adhesive for interior and exterior use

Creamy consistency flexible adhesive

Flexible natural stone adhesive

Lightweight, low dust flexible adhesive for thin, medium and thick bed installation techniques


Mineral-based multi-function flexible grout for tiles, natural stone and other finishes from 1 to 10 mm joint widths, with FAST TECHNOLOGY

Silicone sealant for discolouration-free elastic jointing

Simple to use grout, up to 6 mm joint widths

Silicone sealant for movement joints