back

Installation of synthetic stone

Synthetic stones are agglomerates of natural stones, which are bound with cement or resin. A few of these materials have pronounced expansion. As a rule, they can be laid with a highly polymer-modified thin-bed mortar with rapid crystalline binding of the mixing water. A few of these materials, especially those with high serpentinite components can ‘curl’ which can only be prevented by installing with a reaction resin adhesive. Our technical department is available for individual advice.

Print page
PRIMING

Solvent free universal primer, water and alkali resistant

LEVELLING

Levelling compound up to 30 mm

Smoothing compound from 2 – 30 mm, interior and exterior areas

TILE INSTALLATION

Epoxy resin-based, chemical resistant mortar

Deformable, rapid hardening flexible adhesive for heavy duty areas, also for natural stone, with FAST TECHNOLOGY

Polymer dispersion

Flexible natural stone adhesive, modified with 2.0 – 4.2 kg UNIFLEX-F

GROUTING

Mineral-based multi-function flexible grout for tiles, natural stone and other finishes from 1-10 mm joint widths with FAST TECHNOLOGY

Rapid hardening flexible grout, 3 – 20 mm joint width

Silicone sealant for use with natural stone