UNIFLEX-F Technical Data Sheet EN 2218.pdf
1 Trang
70 KB
Download
<h1>UNIFLEX-F Technical Data Sheet EN 2218.pdf</h1> <p>SCHOMBURG GmbH & Co. KG <br />Aquafinstrasse 2–8 <br />D-32760 Detmold (Germany) <br />phone + 49-5231- 953-00 <br />fax + 49-5231- 953-108 <br />email export@schomburg.de <br />www.schomburg.com</p> <p>Technical Data Sheet</p> <p>UNIFLEX®-F</p> <p>Art. no. 2 04307</p> <p>Liquid polymer for modifying tile adhesive <br />Component B of UNIFIX-S3, UNIFIX-S3-fast <br />Substrate: <br />See the technical data sheet of the combined product.</p> <p>• polymer modified <br />• solvent-free <br />• flexible</p> <p>Application: <br />Put UNIFLEX-F into a clean mixing bucket and stir it with the <br />respective powder component to produce a homogenous, <br />lump-free bulk density. With a strong stirrer (approx. 500– <br />700 min-1), a mixing time of approx. 2–3 min. is required. <br />To set the product-specific consistency, water may also <br />be added. After a maturing time of approx. 3 minutes, <br />the mixture is stirred again intensively. The technical data <br />sheets for the respective adhesive that is used are binding <br />for application.</p> <p>Areas of use: <br />UNIFLEX-F is liquid polymer component for elastic tile <br />adhesives on critical and deformable substrates, for <br />production of: <br />• Highly deformable flex adhesive with SCHOMBURG <br />tile adhesives, e.g. UNIFIX-S3 powder component, <br />UNIFIX-S3-fast power component, ADF-Systemkleber-FB, <br />AK7P, CRISTALLIT-FLEX, CRISTALLIT-MULTI-FLEX, <br />CRISTALLIT-VARIO-light, LIGHTFLEX, MONOFLEX, <br />MONOFLEX-FB, MONOFLEX-XL, SOLOFLEX, <br />SOLOFLEX-fast, UNIFIX-AEK. <br />• Combined products may be used both inside and <br />outside.</p> <p>Elastic tile adhesive: <br />UNIFLEX-F as a combined product with tile and natural <br />stone adhesive for improved adhesion and deformation. <br />To produce highly deformable tile adhesive, 5 kg to <br />8.33 kg are normally added to 25 kg powder or 15 kg <br />in case of LIGHTFLEX and CRISTALLIT-VARIO-light.</p> <p>Technical data: <br />Basis: <br />Polymer dispersion <br />Colour: white <br />pH value: <br />approx. 9.8 <br />Reaction to fire: E (as a combined product) <br />Application/ <br />substrate temp.: +5 °C to +30 °C <br />Pot life*): approx. 60 min, independent of the <br />combined product used. <br />Packaging: <br />5 and 8.33 kg canister <br />Storage: Frost-free, min. 12 months in the <br />original unopened container, use <br />opened container immediately <br />Consumption: <br />According to the respective technical <br />data sheets of the tile adhesive <br />Cleaning: Building components or tools fouled <br />with UNIFLEX-F or a combined <br />product must be cleaned immediately <br />with water. Dried material can only be <br />removed mechanically.</p> <p>Important instructions: <br />• Surfaces that should not be treated must be protected <br />against the effects of UNIFLEX-F. <br />• The combined products must be protected against wet <br />and water influences until they have hardened. <br />Please observe valid EU safety data sheets! <br />GIS CODE: ZP1 (powder components) <br />GIS CODE: D1 (UNIFLEX-F liquid component)</p> <p>*) This value applies to +23 °C and 50% relative humidity. <br />The rights of the buyer with regard to the quality of our materials are based on our terms and conditions of sale and delivery. Our technical advice team will be happy to advise you in the <br />case of requirements that exceed the scope of the application described here. In order to be binding, a legally binding written confirmation is required. The product description does not <br />release the user from a duty of care. Lay a test area in the event of uncertainty. This version becomes invalid if a new version is issued. <br />1/1</p> <p>WKD/TAN/TM</p> <p>22/18</p>
