datenblaetter-func-51640-trans-en.pdf
1 Trang
100 KB
Download
<h1>datenblaetter-func-51640-trans-en.pdf</h1> <p>SCHOMBURG GmbH & Co. KG <br />Aquafinstrasse 2–8 <br />D-32760 Detmold - Germany <br />phone + 49-5231- 953-00 <br />fax <br />+ 49-5231- 953-108 <br />mail export@schomburg.de <br />www.schomburg.de/en</p> <p>Technical Data Sheet</p> <p>ASO®-Unigrund-GE </p> <p>v er</p> <p>Properties: <br />• Rapid drying <br />• Universal application <br />• Resistant to water and alkalis <br />• Solvent free</p> <p>y lo</p> <p>io n</p> <p>Ready to use primer</p> <p>w e m is</p> <p>s</p> <p>Areas of application: <br />ASO-Unigrund-GE reduces the absorption of substrates, <br />binds surface dust, consolidates, prevents rapid water <br />loss from levelling compounds. <br />ASO-Unigrund-GE is used for priming absorbent and <br />lightly sanded substrates e.g. gypsum-based construction <br />materials (plaster, interlocking gypsum slabs, boards, <br />screeds), concrete, masonry work and similar. Suitable <br />as an adhesion promoter for surface applied waterproof <br />membranes (e.g. SANIFLEX, AQUAFIN-2K/M), <br />thin-bed adhesives such as LIGHTFLEX, MONOFLEXXL, SOLOFLEX, AK7P, UNIFIX as well as wall and <br />floor levelling compounds such as SOLOCRET-15, <br />SOLOPLAN-30 and ASO-NM15. It is also suitable <br />for exterior use. <br />Technical Data: <br />Basis: acrylate dispersion <br />Colour: coloured green <br />Application/substrate <br />temperature: <br />+5° C to +30° C <br />Specific gravity: <br />1.0 g/cm3 <br />Cleaning: <br />whilst still fresh, with water <br />Storage: <br />frost free, 15 months in the <br /> original unopened <br /> packaging. Use opened <br /> packaging promptly. <br />Packaging: <br />1, 5, 10, 25, 210 and <br /> 1,000 litre containers <br />Consumption: <br />approx. 200 g/m²</p> <p> </p> <p>Art.-No. 2 05536</p> <p>Substrate preparation: <br />The substrate must be load-bearing, clean, dry and <br />free from materials, which will impede adhesion. Flow <br />screeds must be abraded and vacuumed. Remove <br />unstable or weakly bonded layers e.g. release agents, <br />residues of old adhesive, levelling layers, surface <br />finishes and paints, by mechanical scrubbing, planing, <br />scabbling or shot-blasting. <br />Product preparation: <br />ASO-Unigrund-GE is ready to use. Application is with <br />a paint brush, brush or a fine-pored sponge roller but <br />it can also be sprayed with suitable equipment. Avoid <br />applying too thickly or forming puddles. <br />ASO-Unigrund-GE must be fully dry before further work <br />can be carried out on the primed surface. <br />Advice: <br />• The primer must be dry before applying the next coat. <br />• Protect areas not being treated with ASO-Unigrund-GE. <br />• Do not apply wet in wet. <br />• Wash off splashes immediately. <br />Please observe a current valid EU Health & <br />Safety Data Sheet. <br />GISCODE: M-GP01</p> <p>Information about the emission level of volatile compounds in indoor <br />air, which pose a health risk by inhalation, on a scale from class A+ <br />(very low emissions) to C (high emissions).</p> <p>This technical data sheet is a translation from the German language version and does not consider local building codes or legal requirements. It shall be used as general <br />reference for the product. Legally binding is only the German technical data sheet or the latest Data sheet from one of our foreign subsidiaries inside their sales territory. <br />30/13 WKD/CoS/JD</p>
