ADF-Dehnfugenband Technical Data Sheet EN 1117.pdf
2 Các trang
70 KB
Download
<h1>ADF-Dehnfugenband Technical Data Sheet EN 1117.pdf</h1> <p>SCHOMBURG GmbH & Co. KG <br />Aquafinstrasse 2 – 8 <br />D-32760 Detmold (Germany) <br />phone + 49 -5231- 953-00 <br />fax <br />+ 49 -5231- 953-108 <br />email export@schomburg.de <br />www.schomburg.com</p> <p>Technical Data Sheet</p> <p>ADF®-Dehnfugenband </p> <p> </p> <p>Art.-No. 2 05955</p> <p>(ADF®-Expansion-Joint-Tape) <br />• Tear resistant <br />• Water impermeable <br />• Compatible with bitumen <br />• Fleece laminated <br />• Highly elastic <br />Areas of application: <br />For forming water impermeable construction expansion <br />joints and for use at junctions between construction <br />elements, e.g. in areas in contact with the ground. <br />Dependent on the degree of exposure to water, <br />suitable waterproof materials are AQUAFIN-RS300, <br />AQUAFIN-2K, AQUAFIN-2K/M, ASOFLEX-AKB, <br />COMBIDIC-2K-CLASSIC or COMBIDIC-2K-PREMIUM. <br />Technical Data: <br />Basis: composite material <br /> <br />fleece – membrane – fleece <br />Colour: <br />grey, with manufacturer imprint <br />Thickness: <br />0.8 mm <br />Bursting pressure: <br />> 4 bar <br />Temperature resistance: -5 °C to +90 °C <br />UV resistance to <br />DIN EN ISO 4892-2: min. 500 hrs <br />Elongation, longitudinal to <br />DIN 527-3: <br />min. 148% <br />Elongation, transverse to <br />DIN 527-3: <br />min. 250% <br />Chemical resistance after 7 days storage at +22 °C <br />was achieved with the following chemicals: <br /> Hydrochloric acid 3%, <br />Sulphuric acid 35% <br />Citric acid 100 g/l, <br />Potassium hydroxide 3% <br />Sodium hydroxide 0.3 g/l <br />Salt water 20 g/l (sea salt) <br />Packaging: <br />50 m long, 15 cm wide <br /> <br />50 m long, 25 cm wide <br />Storage: <br />cool and dry, protected from <br /> sunlight and weathering, <br /> 24 months</p> <p>Substrates: <br />All conventional substrates, which are suitable for the <br />application of waterproof membranes. The substrate <br />must be professionally prepared. All substrates must <br />be sound, load-bearing, free from frost and adhesion <br />inhibiting components. Any voids or irregularities must be <br />levelled with ASOCRET-M30. <br />Product application: <br />Joint waterproofing at wall/floor junctions and <br />bay movement joints: <br />Apply the waterproof material to both sides of the joint <br />to be bridged to a minimum of 2 cm wider than the <br />ADF-Dehnfugenband (ADF-Expansion-Joint-Tape). Lay <br />the ADF-Dehnfugenband (ADF-Expansion-Joint-Tape) into <br />the fresh material and press in evenly and without folds. <br />Apply another layer of the waterproof coating over <br />the top. The movement joint area (for the subsequent <br />application of an elastic sealant) can remain free from <br />the waterproof coating. Overlap the edges of the joint <br />tape a minimum of 10 cm and fully bond (solid bed) <br />with the waterproof coating avoiding folds. <br />Waterproofing structural movement joints continuous <br />through foundation slabs: <br />Lay the ADF-Dehnfugenband (ADF-Expansion-JointTape) into the joint forming a loop. Using a suitable <br />waterproof material, bond the tape without voids or <br />folds and bed into the waterproof layer. Where there <br />is water under pressure, additionally insert a suitable <br />closed cell backing strip and bond another layer of <br />ADF-Dehnfugenband (ADF-Expansion-Joint-Tape) over <br />the joint with the appropriate waterproof coating and <br />overcoat. <br />For corners and cruciform cross sections, <br />the following pre-formed pieces are available: <br />ASO-Joint-Tape-2000-S-Corners <br />(90° internal and external) <br />ASO-Joint-Tape-2000-T-Piece as well as <br />ASO-Joint-Tape-2000-Cross-Piece <br />Dependent on the degree of exposure to water, <br />suitable waterproof materials are AQUAFIN-RS300, <br />AQUAFIN-2K, AQUAFIN-2K/M, ASOFLEX-AKB and</p> <p>1/2</p> <p>11/17</p> <p>COMBIDIC-2K-CLASSIC or COMBIDIC-2K-PREMIUM. <br />Alternatively ADF-Dehnfugenband <br />(ADF-Expansion-Joint-Tape) can be bonded with <br />ADF-Systemkleber. Once the adhesive has fully dried, <br />incorporate the ADF-Dehnfugenband <br />(ADF-Expansion-Joint-Tape) into the surface waterproof <br />layer with the waterproof coating. <br />After bonding the tape, the following alternative <br />waterproof coatings are available for use: <br />COMBIFLEX-C2/P, COMBIFLEX-EL, COMBIDIC-1K <br />and COMBIDIC-2K-CLASSIC or <br />COMBIDIC-2K-PREMIUM. <br />Important advice: <br />• Recognised construction technology regulations <br />are to be followed. <br />• Joints which are to be safeguarded with <br />ADF-Dehnfugenband (ADF-Expansion-Joint-Tape) <br />must be adequately protected against mechanical <br />damage. <br />• ADF-Dehnfugenband (ADF-Expansion-Joint-Tape) may <br />not be bonded with products containing solvents.</p> <p>This technical data sheet is a translation from the German language version and does not consider local building codes or legal requirements. It shall be used as general reference for the <br />product. Legally binding is only the German technical data sheet or the latest Data sheet from one of our foreign subsidiaries inside their sales territory.</p> <p>2/2</p> <p>SF/CoS/JD</p> <p>11/17</p>
