ESCOSIL-2000-ST_Product_Information_GB_4915.pdf
2 页数
240.9 KB
Download
<h1>ESCOSIL-2000-ST_Product_Information_GB_4915.pdf</h1> <p>Product information <br />Elastic joint sealer</p> <p>ESCOSIL®-2000-ST <br />Natural stone silicone</p> <p>Technical Data: <br />Basis: </p> <p>pure, unmodified, neutral curing silicone sealant</p> <p>Colours: white, pergamon, silver grey, grey, pearl grey, beige, <br />titanium grey, slate grey, nut brown, black <br />Consistency: paste <br />Application temperature: +5 °C to +35 °C <br />Curing after 1 day: </p> <p>approx. 2–3 mm, at +23 °C and 50 % relative humidity</p> <p>Skin formation: </p> <p>approx. 10 minutes, at +23 °C and 50 % relative humidity</p> <p>Temperature resistance: </p> <p>-40 °C to +180 °C</p> <p>Permissible movement <br />accommodation: </p> <p>25 % *</p> <p>Shore-A-hardness: </p> <p>approx. 30, acc. to DIN 53505</p> <p>Consumption: </p> <p>dependent on joint cross-section and depth</p> <p>Packaging: 310 ml, polyethylene cartridges, <br />(12 × 310 ml tubes per box) <br />*) F or interior floor application, a total deformation of 12.5% is permitted.</p> <p>nut brown</p> <p>silver grey</p> <p>beige</p> <p>titanium grey</p> <p>grey</p> <p>pergamon</p> <p>slate grey</p> <p>black <br />* Colour differences may exist due to print limitations.</p> <p>SCHOMBURG GmbH & Co. KG <br />Aquafinstrasse 2–8 <br />D-32760 Detmold (Germany) <br />phone +49-5231-953-00 <br />fax <br />+49-5231-953-108 <br />email export@schomburg.de <br />www.schomburg.com</p> <p>TS/CoS/JD</p> <p>pearl grey</p> <p>49/15</p> <p>Areas of application: <br />• ESCOSIL®-2000-ST is used for the discolouration free elastic <br />jointing of natural stone (e.g. marble, granite, gneiss, sandstone <br />etc.) as well as around wash basins, baths, shower trays, door <br />and window frames in dry, damp and wet duty rooms. <br />• ESCOSIL®-2000-ST does give rise to migration of plasticizers <br />or other components, which can lead to picture framing.</p> <p>white</p> <p>Subject to changes. Consult current technical data sheet for most recent information.</p> <p>Colour illustration*:</p> <p>2 05592</p> <p>Product application: <br />Once any applied primer has dried (see technical data sheet), filling can be <br />undertaken with ESCOSIL®-2000-ST. Using a caulking gun, extrude <br />ESCOSIL®-2000-ST into the prepared joint. Then, before it forms a skin, <br />smoothen the surface of the applied sealant using a proprietary smoothing <br />agent and a suitable tool. Due to the sensitivity of some natural stones, it is <br />categorically recommended that a special proprietary smoothing agent is <br />used. This process ensures the material is pressed into the joint and at the <br />same time pressed against the contact surfaces. Follow the general rules for <br />producing elastic joints.</p> <p>ESCOSIL®-2000-ST <br />Natural stone silicone</p> <p>Properties: <br />• 1 component <br />• Acetic cross-linking <br />• Elastic <br />• Contains a fungicide <br />• Resistant to chemicals <br />• Weather-, UV- and <br />ageing-resistant <br />• Watertight <br />• For walls and floors</p> <p>Information about the emission level of volatile compounds in indoor <br />air, which pose a health risk by inhalation, on a scale from class A+ <br />(very low emissions) to C (high emissions).</p> <p>1 ESCOSIL®-2000-ST and suitable tool</p> <p>2 Installation of a suitable backing strip</p> <p>3 Application of ESCOSIL®-2000-ST</p> <p>4 Application of a suitable smoothing agent</p> <p>5 Striking off excess silicone sealant</p> <p>6 Subsequent smoothing</p> <p>Please take supplementary advice from the current valid technical data <br />sheet. <br />Application: <br />The surfaces with which the sealant will be in contact must be dry (concrete <br />< 4% moisture), clean, dust free as well as free from all substances, which <br />act as separating agents (e.g. oil, paint residues, sealants, cement slurries, <br />grout residues etc.). Whilst ESCOSIL®-2000-ST hardens, no moisture may <br />be allowed to penetrate from the edges or the base of the joint.</p>
