Purcrete 200 (BV)_13.10.15 GB Leistungserklärung GB.pdf
2 Pages
70 Ko
Download
<h1>Purcrete 200 (BV)_13.10.15 GB Leistungserklärung GB.pdf</h1> <p>Declaration of Performance <br />according Annex III oft he Regulation (EU) No. 305/2011</p> <p>for the product</p> <p>Purcrete 200 (BV) <br />406460</p> <p>1.</p> <p>Unique identification code of the product type:</p> <p>EN 934-2:2009 + A1:2012:T2</p> <p>2. Identification :</p> <p>batch no.: see packaging of the product</p> <p>3. Intended use:</p> <p>Water reducing/plasticizing admixture for <br />concrete - EN 934-2:T2</p> <p>4. Manufacturer :</p> <p>Schomburg GmbH & Co. KG <br />Aquafinstrasse 2-8 <br />32760 Detmold</p> <p>5. Authorized representative:</p> <p>not relevant</p> <p>6. System or systems of assessment and <br />verification of constancy of performance <br />of the construction product as:</p> <p>System 2+</p> <p>7. Notified test laboratory:</p> <p>The notified body Institut für Bautechnik <br />Warschau identification number 1488 <br />performed the initial inspection of the <br />manufacturing plant and of factory <br />production control and the continuous <br />surveillance, assessment and evaluation of <br />factory production control under system 2+ <br />and issued : <br />certificate of conformity of the factory <br />production control : 1488-CPR-0023/Z <br />.</p> <p>8. Declared performance :</p> <p>Essential characteristic <br />Chloride ion content <br />Alkali content <br />Corrosion behaviour</p> <p>Compressive strength <br />Water reduction <br />Air content <br />Dangerous substances</p> <p>Performance <br />max. 0,1 % by mass <br />max. 2,6 % by mass <br />Contains components only <br />from EN 934-1:2009, Annex A. <br />1 <br />At 7 and 28 days : <br />Test mix > 110 % of control <br />mix <br />In test mix ≥ 5 % compared <br />with control mix <br />Test mix < 2 % by volume <br />above control mix <br />NPD</p> <p>Harmonised <br />technical specification</p> <p>EN 934-2:2009 <br />+ A 1:2012</p> <p>The performance of the product identified in points 1 and 2 is in conformity with the declared <br />performance in point 8. This declaration of performance is issued under the sole responsibility of the <br />manufacturer identified in point 4. <br />Signed for and on behalf of the manufacturer by: <br />Thomas Beyer, technician <br />(name and function)</p> <p>Detmold, 13.10.2015</p> <p>This declaration of performance was created electronically. It is valid without manual <br />signature.</p> <p>The current material safety data sheet and technical data sheet is downloadable under</p> <p>http://www.schomburg.de/de/Sicherheitsdatenblatt-datenblaetter.html <br />or <br />http://www.schomburg.de/de/Technisches_Merkblatt-datenblaetter.html</p>
