Lightflex_DoP_GB.pdf
2 Pages
69 Ko
Download
<h1>Lightflex_DoP_GB.pdf</h1> <p>Declaration of Performance <br />according Annex III oft he Regulation (EU) No. 305/2011</p> <p>for the product</p> <p>Lightflex <br />201005 <br />1.</p> <p>Unique identification code of the product type:</p> <p>EN 12004 C2</p> <p>2. Identification :</p> <p>batch no.: see packaging of the product</p> <p>3. Intended use:</p> <p>improved cementitious adhesive for internal <br />and external tiling</p> <p>4. Manufacturer :</p> <p>Schomburg GmbH & Co. KG <br />Aquafinstrasse 2-8 <br />32760 Detmold</p> <p>5. Authorized representative:</p> <p>not relevant</p> <p>6. System or systems of assessment and <br />verification of constancy of performance <br />of the construction product as:</p> <p>System3 <br />System 3 reaction to fire</p> <p>7. Notified test laboratory:</p> <p>The notified testing laboratory <br />Materialprüfungsamt Nordrhein-Westfalen. <br />identification number 0432 <br />performed the determination of the producttype on the basis of type testing under <br />system 3 and issued: test report No <br />220003005-04. <br />The notified body MPA NRW identification <br />number 0432 performed the determination of <br />the class regarding reaction to fire on the <br />basis of product testing under system 3 and <br />issued: test report No 230007680-3.</p> <p>8. Declared performance :</p> <p>Essential characteristic <br />Reaction to fire <br />Bond strength <br />After dry storage <br />Durability of bond strength <br />Tensile adhesion strength after water <br />immersion <br />Tensile adhesion strength after heat <br />ageing <br />Tensile adhesion strength after freezethaw cycles</p> <p>Performance</p> <p>Harmonised <br />technical specification</p> <p>A1 / A1fl <br />≥ 1,0 N/mm</p> <p>2</p> <p>≥ 1,0 N/mm</p> <p>2</p> <p>≥ 1,0 N/mm</p> <p>2</p> <p>≥ 1,0 N/mm</p> <p>2</p> <p>EN 12004:2007+A1:2012</p> <p>Essential characteristic <br />Release of dangerous substances</p> <p>Performance</p> <p>Harmonised <br />technical specification</p> <p>NPD</p> <p>The performance of the product identified in points 1 and 2 is in conformity with the declared <br />performance in point 8. This declaration of performance is issued under the sole responsibility of the <br />manufacturer identified in point 4. <br />Signed for and on behalf of the manufacturer by: <br />Wilhelm-Kreyling Dreyer, technician <br />(name and function)</p> <p>Detmold, 02.05.2013</p> <p>This declaration of performance was created electronically. It is valid without manual <br />signature.</p> <p>The current material safety data sheet and technical data sheet is downloadable under</p> <p>http://www.schomburg.de/de/Sicherheitsdatenblatt-datenblaetter.html <br />or <br />http://www.schomburg.de/de/Technisches_Merkblatt-datenblaetter.html</p>
