European_Model_EPD_Silicone-based_group_2_2022-08-31.pdf
12 Pages
3,7 Mo
Download
<h1>European_Model_EPD_Silicone-based_group_2_2022-08-31.pdf</h1> <p>ENVIRONMENTAL PRODUCT DECLARATION <br />as per ISO 14025 and EN 15804+A2 <br />Owner of the Declaration</p> <p>DBC, EFCC, FEICA, IVK</p> <p>Programme holder</p> <p>Institut Bauen und Umwelt e.V. (IBU)</p> <p>Publisher</p> <p>Institut Bauen und Umwelt e.V. (IBU)</p> <p>Declaration number</p> <p>EPD-DBC-20220180-IBF1-EN</p> <p>Issue date</p> <p>31.08.2022</p> <p>Valid to</p> <p>30.08.2027</p> <p>Silicone-based products, group 2</p> <p>DBC - Deutsche Bauchemie e.V. <br />EFCC - European Federation for Construction Chemicals <br />FEICA - Association of the European Adhesive and Sealant Industry <br />IVK - Industrieverband Klebstoffe e.V.</p> <p>www.ibu-epd.com | https://epd-online.com</p> <p>Umwelt Produktdeklaration Name des Herstellers – Name des Produkts</p> <p>1. General Information <br />DBC - Deutsche Bauchemie e.V. <br />EFCC - European Federation for <br />Construction Chemicals <br />FEICA - Association of the European <br />Adhesive and Sealant Industry <br />IVK - Industrieverband Klebstoffe e.V.</p> <p>Silicone-based products, group 2</p> <p>Programme holder <br />IBU – Institut Bauen und Umwelt e.V. <br />Hegelplatz 1 <br />10117 Berlin <br />Germany</p> <p>Owner of the declaration <br />DBC, Mainzer Landstr. 55, D-60329 Frankfurt a.M. <br />EFCC, 172 Boulevard du Triomphe, B-1160 Brussels <br />FEICA, Rue Belliard 40, B-1040 Brussels <br />IVK, Völklingerstr. 4, D-40219 Düsseldorf</p> <p>Declaration number <br />EPD-DBC-20220180-IBF1-EN</p> <p>Declared product / declared unit <br />1 kg silicone-based product, group 2; density 1.0 - 1.5 <br />g/cm³</p> <p>This declaration is based on the product <br />category rules: <br />Building sealants, 07.2014 <br />(PCR checked and approved by the SVR)</p> <p>Scope:</p> <p>Issue date <br />31.08.2022 <br />Valid to <br />30.08.2027</p> <p>This verified EPD entitles the holder to bear the <br />symbol of the Institut Bauen und Umwelt e.V. It <br />exclusively applies for products produced in Europe <br />and for a period of five years from the date of issue. <br />This EPD may be used by members of DBC, EFCC, <br />FEICA and IVK and their members provided it has <br />been proven that the respective product can be <br />represented by this EPD. For this purpose, a guideline <br />is available at the secretariats of the four associations. <br />The members of the associations are listed on their <br />respective websites. <br />The owner of the declaration shall be liable for the <br />underlying information and evidence; the IBU shall not <br />be liable with respect to manufacturer information, life <br />cycle assessment data and evidences. <br />The EPD was created according to the specifications <br />of EN 15804+A2. In the following, the standard will be <br />simplified as EN 15804. <br />Verification</p> <p>Dipl. Ing. Hans Peters <br />(chairman of Institut Bauen und Umwelt e.V.)</p> <p>Dr. Alexander Röder <br />(Managing Director Institut Bauen und Umwelt e.V.))</p> <p>The standard EN 15804 serves as the core PCR <br />Independent verification of the declaration and data <br />according to ISO 14025:2011 <br />internally <br />x externally</p> <p>Matthias Schulz <br />(Independent verifier)</p> <p>2. Product <br />2.1 <br />Product description/Product definition <br />Silicone-based products, group 2 with a Volatile <br />Organic Compound (VOC) content ≤2 % (VOC <br />definition according to Decopaint Directive) are <br />manufactured from reactive siloxane and so-called <br />silicone oil, optionally by using fillers, extenders, colour <br />pigments, cross-linkers, bonding agents and catalysts. <br />For most of the applications the products are <br />formulated as moisture-reactive one-component <br />systems; for industrial applications there are also twocomponent systems available. They permanently and <br />elastically seal joints planned for the building. Silicone2</p> <p>based products fulfil key functions. Ingress of moisture <br />into the structure via the joints is prevented by joint <br />sealants. With the use of silicone-based products, the <br />fitness for use of the building and the service life are <br />decisively extended. The product displaying the <br />highest environmental impacts was used as a <br />representative product for calculating the Life Cycle <br />Assessment results (worst-case approach). <br />For the placing on the market in the European <br />Union/European Free Trade Association (EU/EFTA) <br />with the exception of Switzerland) products falling <br />under the Regulation (EU) No 305/2011 (CPR) need a</p> <p>Environmental Product Declaration DBC, EFCC, FEICA, IVK – Silicone-based products, group 2</p> <p>Declaration of Performance taking into consideration <br />either the relevant harmonised European standard or <br />the European Technical Assessment and the CE <br />marking. For the application and use of the products <br />the respective national provisions apply. <br />2.2 <br />Application <br />Module 1: Façade sealants <br />Silicone-based products are used for the elastic <br />sealing of joints. The areas of application for façade <br />sealants include expansion joints (movement joints) <br />and/or connection joints already existing in exterior <br />walls and on window and door frames (including the <br />inside section). All these sealants fulfil key functions of <br />the building. <br />Module 2: Sealants for glazing <br />Silicone-based products are used for the elastic <br />sealing of joints which may be subject to movement. <br />Sealants for glazing are used in the following areas: <br />(i)Glass to glass (ii)Glass to frame (iii)Glass to porous <br />substrates <br />Module 3: Sanitary sealants <br />The areas of application for silicone-based sanitary <br />sealants are joints in sanitary areas and kitchens. <br />Joints sealed using sanitary sealants comprise <br />connection joints between sanitary furnishings and the <br />wall, connection joints between the floor and wall or <br />movement joints across surfaces, for example. <br />Module 4: Sealants for pedestrian walkways <br />The areas of application for silicone-based sealants for <br />pedestrian walkways are floor joints designed for <br />pedestrian walkways, public areas, movement joints <br />between concrete slabs, areas with pedestrian load, <br />areas used with trolleys, walkable floors, balconies, <br />terraces, warehouses. <br />Module 5: Bonded glazing sealants <br />One- and two-component structural sealants are to be <br />used in a structural sealant glazing system (SSGK) to <br />bond glazing products to metallic structural seal <br />support frames and/or as the second barrier of the <br />structural hermetic seal in insulating glass units. <br />2.3 <br />Technical Data <br />The density of the products is between 1,00 and 1,50 <br />g/cm³, other relevant technical data can be found in the <br />manufacturer’s technical documentation.</p> <p>Constructional data <br />Name</p> <p>Value</p> <p>Unit</p> <p>only for <br />module 2: <br />Elastic recovery EN ISO 7389 <br />% <br />>/=25 or <br />>/=100 <br />value to be <br />declared <br />by the <br />Loss of volume EN ISO 10563 <br />% <br />manufactur <br />er <br />only for <br />module 1,2 <br />and 3; <br />value to be <br />Resistance to flow EN ISO 7390 <br />mm <br />declared <br />by the <br />manufactur <br />er <br />only for <br />module 1, <br />Tensile properties EN ISO 8339 <br />3 and 4: <br />=0,9 <br />Adhesion/cohesion properties at <br />only for <br />maintained extension after <br />module 1 <br />immersion in water EN ISO 10590 and 4: NF* <br />only for <br />Adhesion/cohesion properties <br />module 1: <br />% <br />after immersion in water plastic <br />>/=25 or <br />sealants EN ISO 10591 <br />>/=100 <br />Adhesion/cohesion properties <br />only for <br />after exposure to heat, water and <br />module <br />artificial light EN ISO 11431 <br />2:NF* <br />Adhesion/cohesion properties at <br />maintained extension after <br />immersion in water for sealants in only for <br />class XS and/or <br />module 3 <br />adhesion/cohesion properties after and 4: NF* <br />immersion in water for sealants in <br />class S EN ISO 10590 <br />Adhesion/cohesion properties at <br />only for <br />maintained extension after 28 <br />module <br />days salt water immersion <br />4**: NF* <br />* NF: Passed-Failed criteria. The sealant class must <br />also be indicated for the declared product. <br />** not required for interior use <br />valid for all modules: Other performance <br />characteristics in accordance with the manufacturer's <br />technical documentation/declaration of performance</p> <p>Module 1: Façade sealants <br />The minimum requirements on water and airtightness <br />as per Table ZA.1 of EN 15651-1 apply: see table <br />Module 2: Sealants for glazing <br />The minimum requirements on water and airtightness <br />as per Table ZA.1 of EN 15651- 2 apply: see table <br />Module 3: Sanitary sealants <br />The minimum requirements on water and airtightness <br />as per Table ZA.1 of EN 15651-3 apply: see table <br />Module 4: Sealants for pedestrian walkways <br />The minimum requirements on water and airtightness <br />as per Table ZA.1 of EN 15651-4 apply: see table <br />Module 5: Bonded glazing sealants <br />Structural Sealants must comply with ETAG 0021 used as EAD.</p> <p>3</p> <p>2.4 <br />Delivery status <br />Pasty in containers made of plastic, foil or metal. <br />Typical container sizes contain 50 ml to 1000 ml of <br />product. A combination of HDPE (high-density <br />polyethylene) cartridges, cardboard and pallets was <br />modelled for the LCA. For one and two component <br />bonded glazing sealants (Module 5) 200 l metal drums <br />and plastic or metal 20 l pails are used as containers. <br />2.5 <br />Base materials/Ancillary materials <br />Silicone-based products, group 2 are manufactured <br />from reactive siloxane and silanes, sometimes using <br />fillers. The cross-linking reaction occurs through the <br />effects of humidity in the air when installed. Typically, <br />the products covered by this EPD contain the following <br />range of base materials and auxiliaries (% by mass):</p> <p>Environmental Product Declaration DBC, EFCC, FEICA, IVK – Silicone-based products, group 2</p> <p>Siloxanes: 45-90 <br />Silanes: 2-10 <br />Silicone plasticizers: 0-30 <br />Mineral fillers: 0-50 <br />Fumed silica: 0-20 <br />Mineral oil/Solvent: 0-30 <br />Pigments: 0-20 <br />Water: 0-20 <br />Additives: <5 <br />VOC according to Decopaint Directive: ≤2 % <br />(mandatory) <br />These ranges are average values and the composition <br />of products complying with the EPD can deviate from <br />these concentration levels in individual cases. More <br />detailed information is available in the respective <br />manufacturer's documentation (e.g. product data <br />sheets). <br />Note: For companies to declare their products within <br />the scope of this EPD it is not sufficient to simply <br />comply with the product composition shown above. <br />The application of this EPD is only possible for <br />member companies of DBC, EFCC, FEICA, and IVK <br />member associations and only for specific formulations <br />with a total score below the declared maximum score <br />for a product group according to the associated <br />guidance document. <br />1. substances from the “Candidate List of <br />Substances of Very High Concern for <br />Authorisation” (SVHC) <br />If this product contains substances listed in the <br />candidate list (latest version) exceeding 0.1 <br />percentage by mass, the relevant information can be <br />found in the safety data sheet of the relevant product <br />covered by this model EPD. <br />2. CMR substances in categories 1A and 1B <br />If this product contains other carcinogenic, mutagenic, <br />reprotoxic (CMR) substances in categories 1A or 1B <br />which are not on the candidate list, exceeding 0.1 <br />percentage by mass, the relevant information can be <br />found in the safety data sheet of the relevant product <br />covered by this model EPD. <br />3. Biocide products added to the construction <br />product <br />If this construction product contains biocide products, <br />the active substances, information on the <br />concentration and/or concentration range, the product <br />type together with information on their hazardous <br />properties are listed in the safety data sheet of the <br />respective product. <br />2.6 <br />Manufacture <br />Silicone-based products are generally manufactured <br />by mixing the ingredients and then filling them into the <br />delivery containers. <br />2.7</p> <p>Environment and health during <br />manufacturing <br />As a general rule, no other environmental or health <br />protection measures other than those specified by law <br />are necessary. <br />2.8 <br />Product processing/Installation <br />One-component silicone-based products are usually <br />processed manually on site using suitable tools. In <br />most cases, the products are inserted into joints using <br />cartridge guns, whereby health and safety measures <br />(gloves and goggles, ventilation) are to be taken and <br />4</p> <p>consistently adhered to in accordance with the <br />information on the safety data sheet and conditions on <br />site. VOC emissions may occur. Two-component <br />silicone products are processed on the job site by <br />using mix cartridges with static mixers. On the shop <br />floor, two-component dosing & mixing equipment is <br />used (static or dynamic mixers) and the mixed product <br />can be applied manually or fully automatically by a <br />sealing robot. <br />2.9 <br />Packaging <br />A detailed description of packaging is provided in <br />section 2.4. Empty containers and clean foils can be <br />recycled. <br />2.10 Condition of use <br />During the use phase, silicone-based products are fully <br />cross-linked and hardened. They are durable products <br />which protect buildings and significantly contribute <br />towards their appearance, function and long-term <br />value. <br />2.11 Environment and health during use <br />Option 1 – Products for applications outside <br />indoor areas with permanent stays by people <br />During use, silicone-based products lose their reactive <br />capacity and are inert. No risks are known for water, <br />air and soil if the products are used as designated. <br />Option 2 – Products for applications inside indoor <br />areas with permanent stays by people <br />When used in indoor areas with permanent stays by <br />people, evidence of the emission performance of <br />construction products in contact with indoor air must be <br />submitted according to national requirements. No <br />further influences on the environment and health by <br />emanating substances are known. <br />2.12 Reference service life <br />Sealants fulfil key functions in buildings. They <br />decisively improve the usability of building structures <br />and significantly extend their original service lives. <br />Information supplied by the manufacturer on <br />maintenance and care must be observed. <br />2.13</p> <p>Extraordinary effects</p> <p>Fire <br />Even without any special fire safety features, joint <br />sealants comply with at least the requirements of EN <br />13501-1 for fire class E. In terms of volumes used, <br />sealants generally have no or only a minor influence <br />on the fire characteristics (e.g. smoke gas <br />development) of the building in which they are <br />applied. <br />Water <br />Silicone-based products are insoluble in water. They <br />are often used to protect building structures from <br />harmful water ingress or the effects of flooding. <br />Mechanical destruction <br />The mechanical destruction of silicone-based products <br />does not lead to any decomposition products which are <br />harmful to the environment or health. <br />2.14 Re-use phase <br />According to present knowledge, no environmentally <br />hazardous effects in terms of landfilling are to be</p> <p>Environmental Product Declaration DBC, EFCC, FEICA, IVK – Silicone-based products, group 2</p> <p>generally anticipated through dismantling and recycling <br />of components to which hardened silicone sealants <br />adhere. <br />2.15 Disposal <br />Silicone-based products which cannot be recycled can <br />be hardened. Empty containers are directed to the <br />recycling process. Only a low volume of silicone <br />sealants is incurred in the disposal of components in <br />which they are used. Low levels of adhesion do not <br />play any role in terms of disposal. They do not impair <br />the disposal/recycling of other components/building <br />materials. Hardened residual product mechanically <br />removed from substrates must be disposed of as</p> <p>commercial/site waste. The following waste codes <br />according to the European List of Waste (EWC) <br />(2000/532/EC) can apply: <br />Product residue: EWC 08 04 09 <br />EWC 08 04 10 with the exception of those covered by <br />EWC 08 04 09 <br />2.16 Further information <br />More information is available on the manufacturer's <br />product or safety data sheets and is available on the <br />manufacturer's websites or on request. Valuable <br />technical information is also available on the <br />associations' websites.</p> <p>3. LCA: Calculation rules <br />3.1 <br />Declared Unit <br />This EPD refers to the declared unit of 1 kg of siliconebased product, group 2; applied into the building with a <br />density of 1.0 - 1.5 g/cm³ in accordance with the IBU <br />PCR part B for construction sealant. <br />The results of the Life Cycle Assessment provided in <br />this declaration have been selected from the product <br />with the highest environmental impact (worst-case <br />scenario). <br />Depending on the application, a corresponding <br />conversion factor such as the density to convert <br />volumetric use to mass must be taken into <br />consideration. <br />The Declaration type is according to EN 15804: Cradle <br />to gate with options, modules C1–C3, and module D <br />(A1–A3, C, D) and additional modules (A4-A5). <br />Declared unit <br />Name</p> <p>Value</p> <p>Unit</p> <p>Declared unit <br />Gross density <br />Conversion factor to 1 kg</p> <p>1 <br />1-1.5 <br />-</p> <p>kg <br />g/cm^3 <br />-</p> <p>3.2 <br />System boundary <br />Modules A1, A2 and A3 are taken into consideration in <br />the LCA: <br />- A1 Production of preliminary products <br />- A2 Transport to the plant <br />- A3 Production incl. provision of energy, production of <br />packaging as well as auxiliaries and consumables and <br />waste treatment <br />- A4 Transport to site <br />- A5 Installation, product applied into the building <br />during A5 phase operations and packaging <br />disposal. This stage considers VOC emissions during <br />the installation phase. The declared product contain <br />substances in(to) the formulation that directly emit as <br />VOC. VOCs are even generated by a chemical <br />reaction that is occurring during this phase. <br />The end of life for the packaging material considered is <br />described below: <br />-Incineration, for materials like plastic, paper and <br />wood. <br />-C1-C2-C3-D <br />The building deconstruction (demolition process) takes <br />place in the C1 module which considers energy <br />generation and consumption of diesel and all the <br />emissions connected with the fuel-burning process to <br />run the machines. After the demolition, the product is <br />transported to the end-of-life processing (C2 module) <br />5</p> <p>where all the impacts related to the transport <br />processes are considered. For precautionary principle <br />and as a worst-case scenario, thermal treatment is the <br />only end-of-life scenario considered. This is modelled <br />by the incineration process (module C3) where the <br />product ends its life cycle. <br />Module D accounts for potential benefits that are <br />beyond the defined system boundaries. Credits are <br />generated during the incineration of wastes and related <br />electricity produced that are occurring in the A5 <br />module. <br />3.3 <br />Estimates and assumptions <br />For this EPD formulation and production data defined <br />and collected by FEICA were considered. Production <br />waste was assumed to be disposed of by incineration <br />without credits as a worst-case for recovered thermal <br />energy (recovered electricity is looped back within <br />module A1-A1). <br />An average of plastic containers and wooden pallets <br />was considered in the LCA. <br />3.4 <br />Cut-off criteria <br />All raw materials submitted for the formulations and <br />production data were taken into consideration. <br />The manufacture of machinery, plant and other <br />infrastructure required for the production of the <br />products under review was not taken into consideration <br />in the LCA. <br />Transport of packaging materials is excluded. <br />3.5 <br />Background data <br />Data from the GaBi database SP40 (2020) was used <br />as background data. <br />3.6 <br />Data quality <br />Representative products were applied for this EPD and <br />the product in the group displaying the highest <br />environmental impact was selected for calculating the <br />LCA results. The background datasets used are less <br />than 4 years old. <br />Production data and packaging are based on details <br />provided by the manufacturer. The formulation used for <br />evaluation refers to a specific product. <br />The data quality of the background data is considered <br />to be good. <br />3.7 <br />Period under review <br />Representative formulations are valid for 2021. <br />3.8 <br />Allocation <br />Mass allocation has been applied when primary data <br />have been used and implemented into the LCA model.</p> <p>Environmental Product Declaration DBC, EFCC, FEICA, IVK – Silicone-based products, group 2</p> <p>3.9 <br />Comparability <br />Basically, a comparison or an evaluation of EPD data <br />is only possible if all the data sets to be compared <br />were created according to EN 15804 and the building</p> <p>context, respectively the product-specific <br />characteristics of performance, are taken into account. <br />The GaBi database SP40 (2020) was used.</p> <p>4. LCA: Scenarios and additional technical information <br />Characteristic product properties <br />Information on biogenic Carbon <br />The packaging material contain biogenic carbon which <br />is presented below. <br />Information on describing the biogenic Carbon <br />Content at factory gate <br />Name</p> <p>Value</p> <p>Unit</p> <p>Biogenic Carbon Content in <br />kg C <br />product <br />Biogenic Carbon Content in <br />0.024 <br />kg C <br />accompanying packaging <br />For the preparation of building life cycle assessments, <br />it must be taken into account that in module A5 <br />(installation in the building) the biogenic amount of <br />CO2 (0.024 kg C *3.67 = 0.088 kg CO2-eq.) of the <br />packaging bound in module A1-A3 is mathematically <br />booked out.</p> <p>Transport to the building site (A4) <br />Name</p> <p>Value</p> <p>Unit</p> <p>Transport distance <br />Gross weight <br />Payload capacity</p> <p>1000 <br />34 - 40 <br />27</p> <p>km <br />t <br />t</p> <p>Value</p> <p>Unit</p> <p>Installation into the building (A5) <br />Name</p> <p>Other resources for packaging <br />0.225 <br />kg <br />material <br />Material loss <br />0.01 <br />kg <br />Material loss considers the amount of product not used <br />during the application phase into the building. This <br />amount is 1 % of the product and, impacts related to <br />the production of this part are assigned to the A5 <br />module. This percentage is considered as waste to <br />disposal and impacts of its end of life have been <br />considered in the LCA model and declared in A5.</p> <p>End of life (C1-C4) <br />Name</p> <p>Collected as mixed construction <br />waste <br />Incineration</p> <p>6</p> <p>Value</p> <p>Unit</p> <p>0.98</p> <p>kg</p> <p>0.98</p> <p>kg</p> <p>Environmental Product Declaration DBC, EFCC, FEICA, IVK – Silicone-based products, group 2</p> <p>5. LCA: Results <br />DESCRIPTION OF THE SYSTEM BOUNDARY (X = INCLUDED IN LCA; ND = MODULE OR INDICATOR NOT <br />DECLARED; MNR = MODULE NOT RELEVANT)</p> <p>Manufacturing</p> <p>Transport from the <br />gate to the site</p> <p>Assembly</p> <p>Use</p> <p>Maintenance</p> <p>Repair</p> <p>Replacement</p> <p>Refurbishment</p> <p>Operational energy <br />use</p> <p>Operational water <br />use</p> <p>De-construction <br />demolition</p> <p>Transport</p> <p>Waste processing</p> <p>Disposal</p> <p>ReuseRecoveryRecyclingpotential</p> <p>END OF LIFE STAGE</p> <p>Transport</p> <p>USE STAGE</p> <p>BENEFITS AND <br />LOADS <br />BEYOND THE <br />SYSTEM <br />BOUNDARIES</p> <p>Raw material <br />supply</p> <p>PRODUCT STAGE</p> <p>CONSTRUCTI <br />ON PROCESS <br />STAGE</p> <p>A1</p> <p>A2</p> <p>A3</p> <p>A4</p> <p>A5</p> <p>B1</p> <p>B2</p> <p>B3</p> <p>B4</p> <p>B5</p> <p>B6</p> <p>B7</p> <p>C1</p> <p>C2</p> <p>C3</p> <p>C4</p> <p>D</p> <p>X</p> <p>X</p> <p>X</p> <p>X</p> <p>X</p> <p>ND</p> <p>ND</p> <p>MNR MNR MNR</p> <p>ND</p> <p>ND</p> <p>X</p> <p>X</p> <p>X</p> <p>ND</p> <p>X</p> <p>RESULTS OF THE LCA - ENVIRONMENTAL IMPACT according to EN 15804+A2: 1 kg of silicone-based <br />product, group 2 <br />Core Indicator</p> <p>Unit</p> <p>A1-A3</p> <p>A4</p> <p>A5</p> <p>C1</p> <p>C2</p> <p>C3</p> <p>D</p> <p>GWP-total <br />[kg CO2-Eq.] <br />6.82E+0 <br />5.87E-2 <br />6.91E-1 <br />2.73E-4 <br />1.21E-2 <br />4.55E-1 <br />-6.18E-1 <br />GWP-fossil <br />[kg CO2-Eq.] <br />6.91E+0 <br />5.81E-2 <br />5.77E-1 <br />2.61E-4 <br />1.16E-2 <br />4.21E-1 <br />-6.17E-1 <br />GWP-biogenic <br />[kg CO2-Eq.] <br />-9.86E-2 <br />1.70E-4 <br />1.15E-1 <br />1.21E-5 <br />5.31E-4 <br />3.46E-2 <br />-1.42E-3 <br />GWP-luluc <br />[kg CO2-Eq.] <br />6.96E-3 <br />4.70E-4 <br />7.39E-5 <br />6.27E-9 <br />2.74E-7 <br />3.43E-5 <br />-4.07E-4 <br />ODP <br />[kg CFC11-Eq.] <br />2.08E-13 <br />6.98E-18 <br />2.14E-15 <br />2.78E-20 <br />1.21E-18 <br />2.96E-16 <br />-6.05E-15 <br />AP <br />[mol H+-Eq.] <br />2.96E-2 <br />1.74E-4 <br />3.70E-4 <br />3.53E-6 <br />3.66E-5 <br />5.15E-4 <br />-8.36E-4 <br />EP-freshwater <br />[kg P-Eq.] <br />1.16E-5 <br />1.77E-7 <br />1.25E-7 <br />5.64E-11 <br />2.46E-9 <br />1.02E-7 <br />-7.49E-7 <br />EP-marine <br />[kg N-Eq.] <br />4.76E-3 <br />7.75E-5 <br />6.65E-5 <br />1.60E-6 <br />1.68E-5 <br />1.97E-4 <br />-2.19E-4 <br />EP-terrestrial <br />[mol N-Eq.] <br />5.19E-2 <br />8.68E-4 <br />8.67E-4 <br />1.75E-5 <br />1.85E-4 <br />2.47E-3 <br />-2.35E-3 <br />POCP <br />[kg NMVOC-Eq.] <br />1.91E-2 <br />1.53E-4 <br />2.97E-2 <br />4.81E-6 <br />3.32E-5 <br />5.11E-4 <br />-6.32E-4 <br />ADPE <br />[kg Sb-Eq.] <br />2.17E-4 <br />4.16E-9 <br />2.17E-6 <br />7.90E-12 <br />3.45E-10 <br />4.52E-9 <br />-9.70E-8 <br />ADPF <br />[MJ] <br />1.25E+2 <br />7.73E-1 <br />1.34E+0 <br />3.73E-3 <br />1.63E-1 <br />5.41E-1 <br />-1.04E+1 <br />[m³ world-Eq <br />WDP <br />2.24E+0 <br />5.19E-4 <br />8.22E-2 <br />5.16E-7 <br />2.25E-5 <br />1.54E-1 <br />-6.01E-2 <br />deprived] <br />GWP = Global warming potential; ODP = Depletion potential of the stratospheric ozone layer; AP = Acidification potential of land and water; EP = <br />Caption Eutrophication potential; POCP = Formation potential of tropospheric ozone photochemical oxidants; ADPE = Abiotic depletion potential for nonfossil resources; ADPF = Abiotic depletion potential for fossil resources; WDP = Water (user) deprivation potential</p> <p>RESULTS OF THE LCA - INDICATORS TO DESCRIBE RESOURCE USE according to EN 15804+A2: 1 kg of <br />silicone-based product, group 2 <br />Indicator</p> <p>Unit</p> <p>A1-A3</p> <p>A4</p> <p>A5</p> <p>C1</p> <p>C2</p> <p>C3</p> <p>D</p> <p>PERE <br />PERM <br />PERT <br />PENRE <br />PENRM <br />PENRT <br />SM <br />RSF <br />NRSF <br />FW</p> <p>[MJ] <br />5.03E+1 <br />4.35E-2 <br />1.43E+0 <br />1.18E-5 <br />5.14E-4 <br />9.18E-2 <br />-2.15E+0 <br />[MJ] <br />9.05E-1 <br />0.00E+0 <br />-9.05E-1 <br />0.00E+0 <br />0.00E+0 <br />0.00E+0 <br />0.00E+0 <br />[MJ] <br />5.12E+1 <br />4.35E-2 <br />5.30E-1 <br />1.18E-5 <br />5.14E-4 <br />9.18E-2 <br />-2.15E+0 <br />[MJ] <br />1.05E+2 <br />7.74E-1 <br />8.96E+0 <br />3.74E-3 <br />1.63E-1 <br />1.34E+1 <br />-1.04E+1 <br />[MJ] <br />2.04E+1 <br />0.00E+0 <br />-7.62E+0 <br />0.00E+0 <br />0.00E+0 <br />-1.28E+1 <br />0.00E+0 <br />[MJ] <br />1.25E+2 <br />7.74E-1 <br />1.34E+0 <br />3.74E-3 <br />1.63E-1 <br />5.41E-1 <br />-1.04E+1 <br />[kg] <br />0.00E+0 <br />0.00E+0 <br />0.00E+0 <br />0.00E+0 <br />0.00E+0 <br />0.00E+0 <br />0.00E+0 <br />[MJ] <br />0.00E+0 <br />0.00E+0 <br />0.00E+0 <br />0.00E+0 <br />0.00E+0 <br />0.00E+0 <br />0.00E+0 <br />[MJ] <br />0.00E+0 <br />0.00E+0 <br />0.00E+0 <br />0.00E+0 <br />0.00E+0 <br />0.00E+0 <br />0.00E+0 <br />[m³] <br />6.92E-2 <br />5.03E-5 <br />2.09E-3 <br />2.11E-8 <br />9.22E-7 <br />3.63E-3 <br />-2.49E-3 <br />PERE = Use of renewable primary energy excluding renewable primary energy resources used as raw materials; PERM = Use of <br />renewable primary energy resources used as raw materials; PERT = Total use of renewable primary energy resources; PENRE = Use of <br />non-renewable primary energy excluding non-renewable primary energy resources used as raw materials; PENRM = Use of nonCaption <br />renewable primary energy resources used as raw materials; PENRT = Total use of non-renewable primary energy resources; SM = Use <br />of secondary material; RSF = Use of renewable secondary fuels; NRSF = Use of non-renewable secondary fuels; FW = Use of net fresh <br />water</p> <p>RESULTS OF THE LCA – WASTE CATEGORIES AND OUTPUT FLOWS according to EN 15804+A2: <br />1 kg of silicone-based product, group 2 <br />Indicator</p> <p>Unit</p> <p>A1-A3</p> <p>A4</p> <p>A5</p> <p>C1</p> <p>C2</p> <p>C3</p> <p>D</p> <p>HWD <br />NHWD <br />RWD <br />CRU <br />MFR <br />MER <br />EEE <br />EET</p> <p>[kg] <br />9.98E-7 <br />3.60E-8 <br />1.01E-8 <br />3.63E-13 <br />1.58E-11 <br />1.73E-9 <br />-4.15E-9 <br />[kg] <br />1.72E+0 <br />1.18E-4 <br />2.19E-2 <br />3.82E-7 <br />1.67E-5 <br />1.34E-1 <br />-4.68E-3 <br />[kg] <br />5.16E-3 <br />9.58E-7 <br />5.69E-5 <br />4.01E-9 <br />1.75E-7 <br />2.46E-5 <br />-7.33E-4 <br />[kg] <br />0.00E+0 <br />0.00E+0 <br />0.00E+0 <br />0.00E+0 <br />0.00E+0 <br />0.00E+0 <br />0.00E+0 <br />[kg] <br />0.00E+0 <br />0.00E+0 <br />0.00E+0 <br />0.00E+0 <br />0.00E+0 <br />0.00E+0 <br />0.00E+0 <br />[kg] <br />0.00E+0 <br />0.00E+0 <br />0.00E+0 <br />0.00E+0 <br />0.00E+0 <br />0.00E+0 <br />0.00E+0 <br />[MJ] <br />0.00E+0 <br />0.00E+0 <br />1.24E+0 <br />0.00E+0 <br />0.00E+0 <br />0.00E+0 <br />0.00E+0 <br />[MJ] <br />0.00E+0 <br />0.00E+0 <br />2.22E+0 <br />0.00E+0 <br />0.00E+0 <br />0.00E+0 <br />0.00E+0 <br />HWD = Hazardous waste disposed; NHWD = Non-hazardous waste disposed; RWD = Radioactive waste disposed; CRU = Components <br />for re-use; MFR = Materials for recycling; MER = Materials for energy recovery; EEE = Exported electrical energy; EEE = Exported <br />Caption <br />thermal energy</p> <p>RESULTS OF THE LCA – additional impact categories according to EN 15804+A2-optional: <br />1 kg of silicone-based product, group 2</p> <p>7</p> <p>Environmental Product Declaration DBC, EFCC, FEICA, IVK – Silicone-based products, group 2</p> <p>Indicator</p> <p>Unit</p> <p>A1-A3</p> <p>A4</p> <p>A5</p> <p>C1</p> <p>C2</p> <p>C3</p> <p>D</p> <p>[Disease <br />PM <br />ND <br />ND <br />ND <br />ND <br />ND <br />ND <br />ND <br />Incidence] <br />[kBq U235IRP <br />ND <br />ND <br />ND <br />ND <br />ND <br />ND <br />ND <br />Eq.] <br />ETP-fw <br />[CTUe] <br />ND <br />ND <br />ND <br />ND <br />ND <br />ND <br />ND <br />HTP-c <br />[CTUh] <br />ND <br />ND <br />ND <br />ND <br />ND <br />ND <br />ND <br />HTP-nc <br />[CTUh] <br />ND <br />ND <br />ND <br />ND <br />ND <br />ND <br />ND <br />SQP <br />[-] <br />ND <br />ND <br />ND <br />ND <br />ND <br />ND <br />ND <br />PM = Potential incidence of disease due to PM emissions; IR = Potential Human exposure efficiency relative to U235; ETP-fw = Potential <br />Caption <br />comparative Toxic Unit for ecosystems; HTP-c = Potential comparative Toxic Unit for humans (cancerogenic); HTP-nc = Potential <br />comparative Toxic Unit for humans (not cancerogenic); SQP = Potential soil quality index</p> <p>Potential Human exposure efficiency relative to U235, Disclaimer 1 – This impact category deals mainly with the <br />eventual impact of low dose ionizing radiation on human health of the nuclear fuel cycle. It does not consider <br />effects due to possible nuclear accidents, occupational exposure nor radioactive waste disposal in underground <br />facilities. Potential ionizing radiation from the soil, radon and (from) some construction materials is also not <br />measured by this indicator. <br />ADP minerals & metals, ADP fossil, WDP, ETF-fw, HTP-c, HTP-nc, SQP, Disclaimer 2 – The results of this <br />environmental impact indicator shall be used with care as the uncertainties on these results are high or as there is <br />limited experience with the indicator. <br />Additional environmental impact indicators (suggested by EN15804, table 4) are not declared in the EPD. The <br />results of this environmental impact indicator shall be used with care as the uncertainties on these results are high <br />and as there is limited experience with the indicator (see ILCD classification in EN 15804, table 5). For this <br />reason, results based on these indicators are not considered suitable for a decision-making process and are thus <br />not declared in the EPD.</p> <p>6. LCA: Interpretation <br />The majority of impacts are associated with the <br />production phase (A1-A3). The most significant <br />contribution to the production phase impacts is the <br />upstream production of raw materials as a main driver. <br />Another contributor in the production phase, in the <br />category of Photochemical ozone formation (POCP), is <br />the plastic used as a packaging material. Emissions <br />associated with the manufacturing of products also <br />have a high influence on Ozone Depletion Potential <br />(ODP) in the production phase. In all EPDs, CO2 is the <br />most important contributor to Global Warming Potential <br />(GWP). For the Acidification Potential (AP), NOx and <br />SO2 contribute the largest share. <br />The majority of life cycle energy consumption takes <br />place during the production phase (A1-A3). Significant <br />contributions to Primary Energy Demand – Nonrenewable (PENRT) come from the energy resources <br />used in the production of raw materials. The largest <br />contributor to Primary Energy Demand – Renewable <br />(PERT) impacts comes from the consumption of <br />renewable energy resources required for the <br />generation and supply of electricity. It should be noted</p> <p>that Primary Energy Demand – Renewable (PERT) <br />generally represents a small percentage of the <br />production phase primary energy demand with the bulk <br />of the demand coming from non-renewable energy <br />resources. <br />Transportation to the construction site (A4) and the <br />installation process (A5) make a low contribution to the <br />overall impacts. Climate change from land use change <br />is the only indicator influenced by transport processes, <br />due to the diesel production used as fuel, because part <br />of this diesel has been produced from bio-based raw <br />materials. <br />The installation phase influence mainly Photochemical <br />ozone formation indicator, due to the emission of VOC <br />during the operations. These emissions are not only <br />directly related to the pre-products in the resins, but <br />they are related to the reaction products between preproducts and air components (water and oxygen). <br />The end-of-life phases influence climate change <br />indicators, due to the thermal treatment process of the <br />silicon-based products occurring in the C3 module.</p> <p>7. Requisite evidence <br />VOC <br />Special tests and evidence have not been carried out <br />or provided within the framework of drawing up this <br />Model EPD. Some member states require special <br />documentation on VOC emissions into indoor air for <br />specific areas of application. This documentation, as <br />well as documentation for voluntary VOC labelling, has <br />to be provided separately and is specific to the product <br />in question. <br />Evidence pertaining to VOC emissions shall show <br />either an attestation of compliance with, <br />8</p> <p>or documentation of test data that are required in <br />any of the existing regulations or in any of the existing <br />voluntary labelling programs for low-emitting products, <br />as far as these <br />(1) include limits for the parameters TVOC, TSVOC, <br />carcinogens, formaldehyde, acetaldehyde, LCI limits <br />for individual substances (including but not limited to <br />the European list of harmonized LCIs), and the Rvalue; <br />(2) base their test methods on EN 16516; <br />(3) perform testing and apply the limits after 28 days <br />of storage in a ventilated test chamber, under the <br />conditions specified in EN 16516; some regulations</p> <p>Environmental Product Declaration DBC, EFCC, FEICA, IVK – Silicone-based products, group 2</p> <p>and programs also have limits after 3 days, on top of <br />the 28 days limits; <br />(4) express the test results as air concentrations in <br />the European Reference Room, as specified in EN <br />16516. <br />Examples of such regulations are the Belgian Royal <br />Decree C-2014/24239, or the German AgBB/ABG. <br />Examples of such voluntary labelling programs are <br />EMICODE, Blue Angel or Indoor Air Comfort. <br />Relevant test results shall be produced either by an <br />ISO 17025 accredited commercial test lab or by a <br />qualified internal test lab of the manufacturer. <br />Examples for the applied limits after 28 days of storage <br />in a ventilated test chamber are: <br />TVOC: 1000 µg/m³</p> <p>TSVOC: 100 µg/m³ <br />Each carcinogen: 1 µg/m³ <br />Formaldehyde: 100 µg/m³ <br />LCI: different per substance involved <br />R-value: 1 (meaning that, in total, 100 % of the <br />combined LCI values must not be exceeded). <br />Informative Annexes (2 tables): <br />Table 1 shown below is an overview of the most <br />relevant regulations and specifications as of October <br />2021, as regards requirements after 3 days of storage <br />in a ventilated test chamber. <br />Table 2 provides an overview of the most relevant <br />regulations and specifications as of October 2021, as <br />regards requirements after 28 days of storage in a <br />ventilated test chamber. Some details may be missing <br />in the table due to lack of space. Values given <br />represent maximum values/limits.</p> <p>8. References <br />ETAG 002-1 <br />ETAG 002-1:2012 (used as EAD) <br />Structural Sealant Glazing Kits (SSGK) – Part 1: <br />Supported and unsupported Systems</p> <p>9</p> <p>RAL UZ 123 <br />RAL UZ 123:2019 Basis for awarding the "Lowemission sealants for interiors" environmental <br />certificate</p> <p>Environmental Product Declaration DBC, EFCC, FEICA, IVK – Silicone-based products, group 2</p> <p>EN ISO 7389 <br />EN ISO 7389:2003 Building construction – Jointing <br />products – Determination of elastic recovery of <br />sealants <br />EN ISO 7390 <br />EN ISO 7390:2003 Building construction – Jointing <br />products – Determination of resistance to flow of <br />sealants <br />EN ISO 8339 <br />EN ISO 8339: 2005 Building construction – Sealants – <br />Determination of tensile properties (Extension to <br />break) <br />EN 10563 <br />EN ISO 10563:2017 Building construction – Sealants – <br />Determination of change in mass and volume <br />EN ISO 10590 <br />EN ISO 10590:2005 Building construction – Sealants – <br />Determination of tensile properties of sealants at <br />maintained extension after immersion in water <br />EN ISO 10591 <br />EN ISO 10591:2005 Building construction – Sealants Determination of adhesion/cohesion properties of <br />sealants after immersion in water <br />EN ISO 11431 <br />EN ISO 11431:2002 Building construction – Jointing <br />products – Determination of adhesion/cohesion <br />properties of sealants after exposure to heat, water <br />and artificial light through glass <br />EN 13501-1 <br />EN 13501-1:2018 Fire classification of construction <br />products and building elements – Part 1: Classification <br />using data from reaction to fire tests <br />ISO 14025 <br />DIN EN ISO 14025:2011-10, Environmental labels and <br />declarations — Type III environmental declarations — <br />Principles and procedures <br />EN 15651-1 <br />EN 15651-1:2012 Sealants for non-structural use in <br />joints in buildings and pedestrian walkways – Part 1: <br />Sealants for façade elements <br />EN 15651-2 <br />EN 15651-2:2012 Sealants for non-structural use in <br />joints in buildings and pedestrian walkways– Part 2: <br />Sealants for glazing <br />EN 15651-3 <br />EN 15651-3:2012 Sealants for non-structural use in <br />joints in buildings and pedestrian walkways – Part 3: <br />Sealants for sanitary joints <br />EN 15651-4 <br />EN 15651-4:2012 Sealants for non-structural use in <br />joints in buildings and pedestrian walkways – Part 4: <br />Sealants for pedestrian walkways <br />EN 15804 <br />EN 15804+A2:2019+AC:2021, Sustainability of <br />construction works — Environmental Product <br />Declarations — Core rules for the product category of <br />construction products.</p> <p>10</p> <p>EN 16516 <br />EN 16516:2017 <br />Construction products - Assessment of release of <br />dangerous substances - Determination of emissions <br />into indoor air <br />EN ISO 17025 <br />EN ISO 17025: 2018-03 <br />General requirements for the competence of testing <br />and calibration laboratories <br />2000/532/EC <br />Commission decision dated 3 May 2000 replacing <br />decision 94/3/EC on a waste directory in accordance <br />with Article 1 a) of Council Directive 75/442/EEC on <br />waste and Council decision 94/904/EC on a directory <br />of hazardous waste in terms of Article 1, paragraph 4 <br />of Directive 91/689/EEC on hazardous waste <br />Belgian Royal Decree C-2014/24239 <br />Belgisch Staatsblad 8 MEI 2014, p. 60603. — <br />Koninklijk besluit tot vaststelling van de <br />drempelniveaus voor de emissies naar het <br />binnenmilieu van bouwproducten voor bepaalde <br />geoogde gebruiken <br />Blue Angel <br />Environmental label organised by the federal <br />government of Germany www.blauer-engel.de <br />Candidate list <br />Candidate List of substances of very high concern for <br />Authorisation, published in accordance with Article <br />59(10) of the REACH Regulation, ECHA, <br />www.echa.europa.eu/candidate-list-table <br />CPR <br />CPR Regulation (EU) No 305/2011 of the European <br />Parliament and of the Council of 9 March 2011 laying <br />down harmonised conditions for the marketing of <br />construction products and repealing Council Directive <br />89/106/EEC <br />Decopaint Directive <br />Directive 2004/42/CE of the European Parliament and <br />the council of 21 April 2004 on the limitation of <br />emissions of volatile organic compounds due to the <br />use of organic solvents in certain paints and varnishes <br />and vehicle refinishing products and amending <br />Directive 1999/13/EC <br />EMICODE <br />EMICODE, GEV – Gemeinschaft <br />Emissionskontrollierte Verlegewerkstoffe, Klebstoffe <br />und Bauprodukte e. V. (pub.).www.emicode.de <br />GaBi 10 <br />GaBi 10: Software and database for comprehensive <br />analysis. LBP, University of Stuttgart and Sphera, 2020 <br />GaBi 10 documentation <br />Gabi 10: documentation of GaBi 10 data sets from the <br />data base for Life Cycle Engineering LBP, University of <br />Stuttgart and Sphera, http://documentation.gabisoftware.com/, 2020 <br />German AgBB <br />Committee for Health-related Evaluation of Building <br />Products: health-related evaluation of emissions of <br />volatile organic compounds (VOC and SVOC) from <br />building products; status: June 2012</p> <p>Environmental Product Declaration DBC, EFCC, FEICA, IVK – Silicone-based products, group 2</p> <p>www.umweltbundesamt.de/produkte/bauprodukte/agb <br />b.htm</p> <p>Product Category Rules for Construction Products, <br />Part B: Building sealants, 2019-04</p> <p>IBU 2021 <br />Institut Bauen und Umwelt e.V.: General Instructions <br />for the EPD programme of Institut Bauen und Umwelt <br />e.V. EPD programme. Version 2.0. Berlin: Institut <br />Bauen und Umwelt e.V., 2021 <br />www.ibu-epd.com</p> <p>REACH <br />Directive (EG) No. 1907/2006 of the European <br />Parliament and of the Council dated 18 December <br />2006 on the registration, evaluation, approval and <br />restriction of chemical substances (REACH), for <br />establishing a European Agency for chemical <br />substances, for amending Directive 1999/45/EC and <br />for annulment of Directive (EEC) No. 793/93 of the <br />Council, Directive (EC) No. 1488/94 of the <br />Commission, Guideline 76/769/EEC of the Council and <br />Guidelines 91/155/EEC, 93/67/EEC, 93/105/EC and <br />2000/21/EC of the Commission.</p> <p>Indoor Air Comfort <br />Product certification by Eurofins, Hamburg, Germany <br />www.eurofins.com <br />PCR Part A <br />Product Category Rules for Building-Related Products <br />and Services, Part A: Calculation Rules for the Life <br />Cycle Assessment and Requirements on the Project <br />report, Version 1.1, Institut Bauen und Umwelt e.V., <br />2021-01 <br />PCR Part B</p> <p>11</p> <p>Environmental Product Declaration DBC, EFCC, FEICA, IVK – Silicone-based products, group 2</p> <p>Publisher <br />Institut Bauen und Umwelt e.V. <br />Hegelplatz 1 <br />10117 Berlin <br />Germany</p> <p>Tel <br />Fax <br />Mail <br />Web</p> <p>+49 (0)30 3087748- 0 <br />+49 (0)30 3087748- 29 <br />info@ibu-epd.com <br />www.ibu-epd.com</p> <p>Programme holder <br />Institut Bauen und Umwelt e.V. <br />Hegelplatz 1 <br />10117 Berlin <br />Germany</p> <p>Tel <br />Fax <br />Mail <br />Web</p> <p>+49 (0)30 - 3087748- 0 <br />+49 (0)30 – 3087748 - 29 <br />info@ibu-epd.com <br />www.ibu-epd.com</p> <p>Tel <br />Fax <br />Mail <br />Web</p> <p>+49 711 341817-0 <br />+49 711 341817-25 <br />info@sphera.com <br />www.sphera.com</p> <p>Tel <br />Fax <br />Mail <br />Web</p> <p>+32 (0)267 673 20 <br />+32 (0)267 673 99 <br />info@feica.eu <br />www.feica.eu</p> <p>Tel <br />Fax <br />Mail <br />Web</p> <p>+49 (0)211 67931-10 <br />+49 (0)211 67931-33 <br />info@klebstoffe.com <br />www.klebstoffe.com</p> <p>Tel <br />Fax <br />Mail <br />Web</p> <p>+49 (0)69 2556-1318 <br />+49 (0)69 2556-1319 <br />info@deutsche-bauchemie.de <br />www.deutsche-bauchemie.de</p> <p>Tel <br />Fax <br />Mail <br />Web</p> <p>+32289720-39 <br />+32289720-37 <br />info@efcc.be <br />www.efcc.eu</p> <p>Author of the Life Cycle <br />Assessment <br />Sphera Solutions GmbH <br />Hauptstraße 111- 113 <br />70771 Leinfelden-Echterdingen <br />Germany</p> <p>Owner of the Declaration <br />FEICA - Association of the <br />European Adhesive and Sealant <br />Industry <br />Rue Belliard 40 box 10 <br />1040 Brussels <br />Belgium</p> <p>Industrieverband Klebstoffe e.V <br />Völklinger Straße 4 <br />40219 Düsseldorf <br />Germany</p> <p>Deutsche Bauchemie e.V. <br />Mainzer Landstr. 55 <br />60329 Frankfurt <br />Germany</p> <p>EFCC - European Federation for <br />Construction Chemicals <br />Boulevard du Triomphe 172 <br />1160 Brussels <br />Belgium</p>
