SOLOCRET-60_205455_Englisch.pdf
4 Pages
1.44 MB
Download
<h1>SOLOCRET-60_205455_Englisch.pdf</h1> <p>Technical data sheet <br />SOLOCRET®-60 <br />Non-slump levelling compound</p> <p>Material number</p> <p>Package type</p> <p>Colour</p> <p>Units / pallet</p> <p>Pc/package</p> <p>205455001</p> <p>25 kg, bag</p> <p>Grey</p> <p>42,000</p> <p>1,000</p> <p>Areas of application <br />to compensate for and level uneven walls and substrates <br />to establish angled trowelling <br />can be used for damp and wet areas <br />for interior and exterior use</p> <p>Product features <br />Non slump <br />Layer thicknesses ca 2 - 60 mm <br />Rapid setting <br />Can be walked on and overcoated after just ca 2 hours <br />Low stress <br />Universally applicable</p> <p>Advantages <br />rapid construction progress <br />High slump resistance <br />Individual surface treatment possible</p> <p>SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com <br />1/4</p> <p>20/04/2026</p> <p>Technical data sheet <br />SOLOCRET®-60 <br />Technical Data <br />Material properties <br />Product components <br />Base material</p> <p>Consistency <br />Bulk density of fresh mortar <br />Classification of the reaction to fire in accordance with DIN EN 13501-1</p> <p>1 component system <br />Special cement <br />Cementitious aggregates <br />Additive <br />Powdered <br />ca 1.6 kg/dm³ <br />E</p> <p>Mixing <br />Mixing time <br />Maturing time <br />Water addition</p> <p>ca 3 - 5 minutes <br />ca 3 minutes <br />approx. 4.1 l - 4.65 l</p> <p>Application <br />Substrate temperature <br />Pot life <br />Consumption pro m² and mm layer thickness <br />Foot traffic after <br />Ready for covering with tiles <br />Application temperature <br />Hardening time / full resilience</p> <p>ca 5 - 25 °C <br />ca 30 minutes <br />ca 1.35 kg <br />ca 2 hours <br />ca 2 hours <br />ca 5 - 25 °C <br />ca 24 hours</p> <p>Processing equipment <br />Aids/tools <br />Flat trowel <br />Stirrer <br />Clean mixing bucket</p> <p>Suitable substrate <br />Firmly adhering tiled finishes <br />Concrete, cement screed (CT), floor levelling compounds, calcium sulphate screeds (CA, CAF), mastic asphalt screeds (AS), magnesia <br />screeds (MA) <br />Cement-based plaster, gypsum plaster, cement-lime plaster, lightweight plaster <br />Tile bearing elements, gypsum fibre boards, gypsum boards, raised floors, cement and fibre cement boards, dry screeds</p> <p>Preparing the substrate <br />Requirement for substrate <br />1. Dry <br />2. Load-bearing <br />3. Firm <br />4. Grippy <br />5. Free of cracks <br />6. Free of adhesion inhibiting substances</p> <p>Measures for substrate preparation <br />The substrate must correspond to the load-bearing capacities in accordance with DIN EN1991-1-1.</p> <p>SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com <br />2/4</p> <p>20/04/2026</p> <p>Technical data sheet <br />SOLOCRET®-60 <br />Preparing the surface <br />1. Check the application substrate and determine the moisture content using the CM method. <br />2. Remove impurities, adhesion-reducing substances and binder accumulations/laitance layers. <br />3. Prime absorbent substrates with ASO-Unigrund-GE, ASO-Unigrund-K or ASO-Unigrund-PLUS. <br />4. Prime non-absorbent substrates with ASO-Unigrund-S or ASO-Unigrund-PLUS.</p> <p>Moisture content of the CM measurement</p> <p>Application <br />Mixing <br />1. Fill the water into a clean mixing bucket and mix with the powder component with a stirrer to produce a homogeneous, lump-free mass. <br />2. The mixing time is ca 3 - 5 minutes. <br />3. After a settling period of ca 3 minutes, thoroughly homogenise the compound again. <br />4. Do not mix more material than can be applied during the pot life.</p> <p>Application <br />1. Apply SOLOCRET®-60 to the primed substrate, and use a suitable tool to distribute it evenly during the pot life. <br />2. SOLOCRET®-60 can be applied in a single application step up to a layer thickness of 60 mm. <br />3. Smooth after around 30 minutes if required. <br />4. After about 60 minutes, if desired, rub the surface with a rubber squeegee. <br />5. After about 90 minutes you can treat surface with grid float.</p> <p>Cleaning tools <br />Clean tools thoroughly with water after use.</p> <p>Storage conditions <br />Storage <br />Store in a cool and dry place. Min. 12 months in the original canister. Promptly use opened container.</p> <p>Notes <br />Direct contact between cement mortar and magnesite screeds leads to the destruction of the magnesite screeds through a chemical reaction <br />known as “magnesite pouring”. Moisture pressure from the rear of the substrate must be prevented through appropriate measures. <br />Mechanically roughen up the magnesite substrate and prime with ASODUR®-GBM epoxy resin. While the coat is still fresh, apply plenty of <br />quartz sand with a grain size of 0.5–1.0 mm. Perform the laying work after a further waiting time of approx. 12 - 16 hours. Remove the <br />unbound quartz sand meticulously. <br />Border, field, building separation and movement joints should be carried over to or installed at the designated location; suitable means such <br />as RD-SK50 edging strips should be used to detach them! Crack control joints should be cut in after the SOLOCRET®-60 has hardened to <br />the level of up to a third of the introduced layer thickness. <br />For levelling mastic asphalt screeds of grade IC10 and planar substrates, we recommend SOLOCRET®-60 up to a layer thickness of 10 <br />mm. <br />Do not add water or new mortar to existing SOLOCRET®-60 mortar that has already set in order to make it workable again. (Risk of <br />inadequate strength development) <br />Protect surfaces that are not to be treated from the effects of SOLOCRET®-60! <br />Calcium sulphate screeds must be protected with the ASO®-Unigrund-GE, ASO®-Unigrund-K, ASODUR®-GBM or ASO®-Unigrund-PLUS <br />primers prior to laying. <br />Rooms, surfaces and building components that are expected to be exposed to water according to DIN 18534 / 18531 / 18535 must be <br />protected by a bonded waterproofing system.</p> <p>SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com <br />3/4</p> <p>20/04/2026</p> <p>Technical data sheet <br />SOLOCRET®-60 <br />Relevant regulations <br />Planning, inspection of substrates and building site circumstances, laying, grouting and subsequent <br />care of the work must be done in accordance with the relevant DIN standards and recognised rules of <br />technology (e.g. the ZDB Data sheets of the Zentralverband Deutsches Baugewerbe e.V.(German <br />construction Association) in the latest version. <br />Observe applicable safety data sheet! <br />Explanations <br />Conformity / Declaration / Verification</p> <p>The rights of the buyer with regard to the quality of our materials are based on our terms and conditions of sale and delivery. Our technical advice team will be happy to advise you <br />in the case of requirements that exceed the scope of the application described here. In order to be binding, a legally binding written confirmation is required. The product description <br />does not release the user from a duty of care. Lay a test area in the event of uncertainty. This version becomes invalid in the event of a new version being issued.</p> <p>SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com <br />4/4</p> <p>20/04/2026</p>
