RD-SK50_205978_Englisch.pdf
2 Pages
256 KB
Download
<h1>RD-SK50_205978_Englisch.pdf</h1> <p>Technical data sheet <br />RD-SK 50 <br />Self-adhesive edging strip</p> <p>Material number</p> <p>Material thickness</p> <p>Contents</p> <p>Packaging</p> <p>Colour</p> <p>205978002</p> <p>approx. 5 mm</p> <p>20 m</p> <p>Roll</p> <p>Grey with SCHOMBURG <br />logo</p> <p>Areas of application <br />prevents acoustic bridges effectively <br />prevents straining reliably in the wall-ground connection area <br />for combination with free-flowing floor levelling compounds</p> <p>Product features <br />With adhesive foot - prevents back floating <br />5 mm thickness <br />Good adhesion on primed substrates</p> <p>Advantages <br />Good adhesion <br />Effective protection against back floating possibility <br />Prevents straining & acoustic bridges</p> <p>Technical Data <br />Material properties <br />Product components <br />Base material <br />Reaction to fire in accordance with DIN EN 4102</p> <p>Ready to use <br />PE foam with self-adhesive foot and fleece back <br />B2</p> <p>Application <br />Consumption</p> <p>approx. 1 m per m</p> <p>Processing equipment <br />Aids/tools <br />Scissors/knife <br />Pressure roller <br />Industrial vacuum cleaner</p> <p>SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com <br />1/2</p> <p>18/06/2025</p> <p>Technical data sheet <br />RD-SK 50 <br />Preparing the substrate <br />Measures for substrate preparation <br />All conventional substrates that are suitable for the application of levelling compounds and coatings, and that have been professionally <br />prepared.</p> <p>Preparing the surface <br />1. Pre-treat the substrate with the primer that is suitable for the system design. <br />2. The primer must be completely dry / must have reacted fully before the subsequent work steps are carried out.</p> <p>Application <br />Application <br />1. Remove the protective film from the adhesive strip. <br />2. Stick the RD-SK50 to the prepared substrate using the adhesive strip and press it on strongly. Cut the adhesive strip at the corner to form a corner. <br />After fastening, RD-SK50 presses onto the wall; acoustic bridges and straining are therefore prevented. <br />3. RD-SK50 is jointless and butt-jointed in the connection areas. The connection / joint area, or cuts must be covered with adhesive tape. <br />4. Subsequent work (e.g. levelling using SOLOPLAN®-30-PLUS) can be performed.</p> <p>Storage conditions <br />Storage <br />Store in a cool and dry place. Min. 12 months in the original canister. Promptly use opened container.</p> <p>Notes <br />Observe the technical data sheets of the products mentioned before starting work. <br />RD-SK 50 may not be glued or overcoated afterwards with products containing solvents.</p> <p>Relevant regulations <br />Planning, inspection of substrates and building site circumstances, laying, grouting and subsequent <br />care of the work must be done in accordance with the relevant DIN standards and recognised rules of <br />technology (e.g. the ZDB Data sheets of the Zentralverband Deutsches Baugewerbe e.V.(German <br />construction Association) in the latest version.</p> <p>The rights of the buyer with regard to the quality of our materials are based on our terms and conditions of sale and delivery. Our technical advice team will be happy to advise you <br />in the case of requirements that exceed the scope of the application described here. In order to be binding, a legally binding written confirmation is required. The product description <br />does not release the user from a duty of care. Lay a test area in the event of uncertainty. This version becomes invalid in the event of a new version being issued.</p> <p>SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com <br />2/2</p> <p>18/06/2025</p>
