FIX-10-M_201818_Englisch.pdf
3 Pages
411 KB
Download
<h1>FIX-10-M_201818_Englisch.pdf</h1> <p>Technical data sheet <br />FIX-10-M <br />Anchoring cement</p> <p>Material number</p> <p>Package type</p> <p>Colour</p> <p>Units / pallet</p> <p>Pc/package</p> <p>201818002</p> <p>6 kg, pail</p> <p>Cement grey</p> <p>85</p> <p>1</p> <p>201818003</p> <p>12 kg, pail</p> <p>Cement grey</p> <p>40</p> <p>1</p> <p>Areas of application <br />For rapid repair work <br />for interior and exterior use</p> <p>Product features <br />High early and ultimate strength</p> <p>Advantages <br />Chloride-free <br />Can be mixed up to 1:3 with fine sand <br />Rapid setting (solidification starts after 5 minutes)</p> <p>SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com <br />1/3</p> <p>12/03/2026</p> <p>Technical data sheet <br />FIX-10-M <br />Technical Data <br />Material properties <br />Product components <br />Base material <br />Consistency <br />Grain size max <br />Compressive strength (1 hrs.) <br />Compressive strength (24 hrs.) <br />Compressive strength (28 days) <br />Start of solidification</p> <p>1 component system <br />Special cement <br />Mortar-like <br />< 0.5 mm <br />approx. 4 N/mm² <br />approx. 35 N/mm² <br />approx. 45 N/mm² <br />approx. 3–5 minutes</p> <p>Mixing <br />Addition of mixing water, fluid consistency <br />Addition of mixing water, spreadable consistency <br />Mixing time</p> <p>approx. 30 - 40 % <br />approx. 25 - 30 % <br />approx. 1 - 2 minutes</p> <p>Application <br />Substrate/application temperature <br />Pot life <br />Consumption per litre - voids</p> <p>approx. 5 - 30 °C <br />approx. 5 minutes <br />approx. 1.5 kg/l</p> <p>Processing equipment <br />Aids/tools <br />Clean mixing bucket <br />Filler <br />Protective gloves <br />Trowel <br />Flat trowel</p> <p>Preparing the substrate <br />Preparing the surface <br />1. Remove loose pieces of plaster and masonry. <br />2. Pre-moisten the dry substrate so that it is matt damp at the time of application.</p> <p>Application <br />Mixing <br />1. Pour the required quantity of water into a clean mixing bucket. <br />2. Completely add the powder and mix until homogeneous and free from lumps. <br />3. For thick-layer repair work, FIX 10-M can be mixed with standard construction site aggregate (mix ratio: 1 part FIX 10-M : 1-2 RT of aggregate).</p> <p>Storage conditions <br />Storage <br />Cool, dry, protected from sunlight. Min. 12 months in the original canister.</p> <p>Notes <br />Protect surfaces that are not to be treated from the effects of FIX-10-M! <br />Appropriate preliminary tests must be carried out. <br />Use FIX 10-S for water-bearing areas. <br />The high binding power of FIX 10-M also allows the addition of "sharp" sand without delaying the setting process. The strength decreases <br />with increasing sand blending. <br />FIX-10-M must not be mixed with plaster or brought into contact with plaster. <br />Mortar that is already hardening must not be stirred up again.</p> <p>SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com <br />2/3</p> <p>12/03/2026</p> <p>Technical data sheet <br />FIX-10-M <br />Observe applicable safety data sheet!</p> <p>The rights of the buyer with regard to the quality of our materials are based on our terms and conditions of sale and delivery. Our technical advice team will be happy to advise you <br />in the case of requirements that exceed the scope of the application described here. In order to be binding, a legally binding written confirmation is required. The product description <br />does not release the user from a duty of care. Lay a test area in the event of uncertainty. This version becomes invalid in the event of a new version being issued.</p> <p>SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com <br />3/3</p> <p>12/03/2026</p>
