Technical data sheet BLANKOL-0 Solvent-free release and impregnating oil
Material number
Package type
Colour
Units / pallet
Pc/package
406101001
25 l, canister
yellowish transparent
24
1
406101003
1,000 l, IBC
406101005
210 l, drum
2
406101002
10 l, canister
60
Areas of application For large-sized moulds, wooden formwork and moulds in in-situ concrete construction For impregnation of base boards in the production of concrete components For conservation of mixers during short-term downtime For use in concrete precasting plants suitable for heated steel moulds up to +60°C
Product features Impregnation and release oil Release agent for all types of formwork Solvent free Non layering odourless Inherently biodegradable in accordance with OECD 301 F
Advantages Prevents rust stains in concrete Minimises swelling and embrittlement of wooden formwork protects manufacturing systems and steel moulds from new rust formation easy formwork removal
SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com 1/2
08/01/2026
Technical data sheet BLANKOL-0 Existing test certificates Determination of the biodegradation behaviour in accordance with OECD-301 F test (manometric respiration test)
Technical Data Material properties Base material Consistency Density (spec. weight) Water dilutable
Mineral oil liquid, not dilutable approx. 0.91 g/cm³ No
Application Consumption
approx. 15.00 - 50.00 g / m²
Processing equipment Aids/tools Pressure spray system Spray equipment
Manual processing Sprayable with pressure spray device
Suitable substrate Large-sized moulds Wooden formwork Moulds Base boards Steel moulds
Preparing the substrate Requirement for substrate 1. Clean 2. Dry
Application Application Use a suitable automatic or manual spray system for application.
Storage conditions Storage Store in a cool and dry place. Min. 24 months in the original canister. Promptly use opened container.
Notes Pre-testing is absolutely necessary! Avoid puddle formation. Excessive application can cause crust formation and buildup. BLANKOL-0 is not dilutable with water! Heated formwork up to +60°C maximum! Excess material can be removed with a mineral-oil-resistant foamed rubber wiper.
Observe applicable safety data sheet!
The rights of the buyer with regard to the quality of our materials are based on our terms and conditions of sale and delivery. Our technical advice team will be happy to advise you in the case of requirements that exceed the scope of the application described here. In order to be binding, a legally binding written confirmation is required. The product description does not release the user from a duty of care. Lay a test area in the event of uncertainty. This version becomes invalid in the event of a new version being issued.
SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com 2/2