BETOCRETE-CL170-P_206443_Englisch.pdf
3 Pages
1.32 MB
Download
<h1>BETOCRETE-CL170-P_206443_Englisch.pdf</h1> <p>Technical data sheet <br />BETOCRETE®-CL170-P <br />Crystalline waterproofing admixture with liquefying properties</p> <p>Material number</p> <p>Package type</p> <p>Colour</p> <p>Units / pallet</p> <p>Pc/package</p> <p>206443001</p> <p>25 kg, can</p> <p>Colourless</p> <p>24</p> <p>1</p> <p>206443002</p> <p>220 kg, drum</p> <p>Colourless</p> <p>2</p> <p>1</p> <p>206443003</p> <p>1,100 kg, IBC</p> <p>Colourless</p> <p>1</p> <p>1</p> <p>Areas of application <br />For integral crystalline waterproofing of concrete components in direct ground contact <br />For foundations and watertight concrete components <br />For economic, commercial, sports facilities and housing construction <br />For infrastructure, water and wastewater structures <br />For in-situ concrete, pre-cast concrete components and shotcrete <br />BETOCRETE-CL210-WP shows the highest effectiveness in exposure class XS</p> <p>Product features <br />Liquid <br />Increased active crack healing in concrete <br />Concrete plasticiser (BV) after DIN EN 934-2:T2 <br />Water savings of up to 10 % <br />Improves frost resistance and resistance to freeze thaw <br />Reduced chloride ion migration <br />Suitable for drinking water after DVGW worksheet W-347 and W-270</p> <p>Advantages <br />crack healing of surface and continuous cracks up to 0.4mm (tapering down to 0.5mm) possible <br />Increase durability of concrete component <br />Minimisation of concrete servicing and maintenance costs <br />Economic liquid dosing in the concrete plant</p> <p>SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com <br />1/3</p> <p>12/03/2026</p> <p>Technical data sheet <br />BETOCRETE®-CL170-P <br />Technical Data <br />Material properties <br />Density (spec. weight) <br />Alkali content (Na2O equivalent) <br />Chloride content <br />Water pollution class (WGK)</p> <p>approx. 1.18 g/cm³ <br />≤ 10.5 percentage by weight <br />≤ 0.1 % <br />1 (Selbsteinstufung)</p> <p>Mixing <br />Mixing time, concrete plant <br />Mixing time, mixer truck (transport concrete)</p> <p>> 45 seconds <br />> 5 minutes</p> <p>Application <br />Application temperature <br />Recommended dosing in regards to cement</p> <p>approx. 8 - 40 °C <br />approx. 1.75 - 2.25 %</p> <p>Material rate <br />Material consumption rate according to the area of application</p> <p>Minimum cement content in concrete</p> <p>Application <br />Dosing in concrete plant <br />BETOCRETE®-CL170-P can be added with the mixing water or the finished concrete mixture.</p> <p>Dosing in mixer truck <br />1. BETOCRETE®-CL170-P is dosed directly into the mixing drum of the mixer truck <br />2. The mixing time must be approx. 1 minute per m³ drum content (however, at least 5 minutes)</p> <p>SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com <br />2/3</p> <p>12/03/2026</p> <p>Technical data sheet <br />BETOCRETE®-CL170-P <br />Storage conditions <br />Storage <br />Store in a frost-free, cool and dry place. At min. 8 - 40 °C for 12 months in the original canister. Promptly use opened container.</p> <p>Notes <br />Stir BETOCRETE®-CL170-P thoroughly after a long storage period (> 1 month). <br />BETOCRETE®-CL170-P modified concretes may have crystals on the surface, depending on the composition. <br />At storage temperatures > +30 °C, BETOCRETE®-CL170-P may change colour. This will not have a negative influence on the product <br />features. <br />Concrete with BETOCRETE®-CL170-P must be produced, applied and post-treated in accordance with the currently valid standards. <br />Lignite fly ash is only of limited suitability. <br />The use of CEM III/B&C cements is prohibited. <br />The crack expansion limitations must be complied with by the planner/engineer/structural engineer under any circumstances. Contrary <br />designs must be verified after the corresponding verification and suitability! <br />Before applying BETOCRETE®-CL170-P, even with other types of additives, preliminary tests must be carried out in accordance with the valid <br />standards. <br />In rare cases, BETOCRETE®-CL170-P can influence the solidification behaviour of the concrete. As a system-compatible product, RUXOLITHT5 (VZ) is available for controlling the concrete. <br />Excluded are concretes of exposure class XA3 in accordance with DIN EN 206-1/DIN 1045-2. <br />Movements in the concrete component, e.g. due to traffic loads or temperature differences, can cause sealed crystalline cracks to open <br />again.</p> <p>Observe applicable safety data sheet! <br />Explanations <br />Conformity / Declaration / Verification</p> <p>The rights of the buyer with regard to the quality of our materials are based on our terms and conditions of sale and delivery. Our technical advice team will be happy to advise you <br />in the case of requirements that exceed the scope of the application described here. In order to be binding, a legally binding written confirmation is required. The product description <br />does not release the user from a duty of care. Lay a test area in the event of uncertainty. This version becomes invalid in the event of a new version being issued.</p> <p>SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com <br />3/3</p> <p>12/03/2026</p>
