ASODUR-IH_205769_Englisch.pdf
3 Pages
1.19 MB
Download
<h1>ASODUR-IH_205769_Englisch.pdf</h1> <p>Technical data sheet <br />ASODUR®-IH <br />Injection resin on epoxy resin basis</p> <p>Material number</p> <p>Contents</p> <p>Unit of quantity</p> <p>Packaging</p> <p>Colour</p> <p>205769001</p> <p>1</p> <p>KG</p> <p>Combination packs</p> <p>Transparent</p> <p>Areas of application <br />For force-locking bonding of cracks in concrete <br />For crack injection in concrete components <br />Not for statically relevant areas</p> <p>Product features <br />Two component <br />Solvent free <br />chemical-resistant <br />Frost and thaw resistant <br />Corresponds to chemical regulation ChemVOCFarbV (2004/42/EC)</p> <p>Advantages <br />Transparent <br />Powerful bond</p> <p>SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com <br />1/3</p> <p>04/06/2025</p> <p>Technical data sheet <br />ASODUR®-IH <br />Technical Data <br />Material properties <br />Product components <br />Base material <br />Density, ready to use product (ISO 1183-1) <br />Flexural strength <br />Compressive strength <br />Shore-D hardness <br />Viscosity, ready to use product [value] <br />Water absorption</p> <p>2 component system <br />Epoxy resin <br />approx. 1.06 g/cm³ <br />approx. 33 N/mm² <br />approx. 79 N/mm² <br />approx. 75 <br />approx. 380 mPa*s <br />max. 1.5 %</p> <p>Mixing <br />Mix ratio, component A <br />Mix ratio, component B <br />Mixing time</p> <p>2 weight proportion <br />1 weight proportion <br />approx. 3 minutes</p> <p>Application <br />Substrate temperature <br />Pot life <br />Minimum reaction temperature <br />Consumption per litre - voids <br />Application temperature <br />Overcoat after <br />Hardening time / full resilience <br />Hardening time / light resilience</p> <p>approx. 10 - 35 °C <br />approx. 45 minutes <br />min. 10 °C <br />approx. 1.1 kg/l <br />approx. 10 - 35 °C <br />approx. 16 hours <br />approx. 7 days <br />approx. 48 hours</p> <p>Processing equipment <br />Aids/tools <br />Hand lever press <br />Foot lever press <br />Injection pump <br />Stirrer</p> <p>Preparing the substrate <br />Substrate quality class</p> <p>Application <br />Crack filling <br />1. Drill holes into existing cracks (crack width approx. 0.2 mm) at a distance of approx. 20 cm. <br />2. Clean the drilled holes from drill dust. <br />3. Insert the injection packer. <br />4. Seal the packer and crack zone on the surface with ASODUR-EKF. Consumption: approx. 1.4 kg/m² per mm layer thickness <br />5. After the crack insulation has cured, press in the thoroughly mixed ASODUR-IH using pressing equipment. <br />6. After the injection resin has cured, remove the injection packer (if relevant), and plug the drilled holes flush with the surface using ASOCRET-M30. <br />Consumption: approx. 1.4 kg/l</p> <p>SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com <br />2/3</p> <p>04/06/2025</p> <p>Technical data sheet <br />ASODUR®-IH <br />Cleaning tools <br />Clean tools immediately after use with suitable solvent.</p> <p>Storage conditions <br />Storage <br />Store in a frost-free, cool and dry place. At min. 10 - 25 °C for 18 months in the original canister. Promptly use opened container.</p> <p>Disposal <br />Hardened product leftovers can be disposed of in accordance with disposal code AVV 15 01 06.</p> <p>Notes <br />The indicated consumption quantities are calculated values without additions for textured surface roughness and absorbency, level <br />compensation and residual material in the container. We always recommend a calculated safety addition of 10% on top of the calculated <br />consumption quantities. <br />Higher temperatures shorten the pot life. Lower temperatures increase the application and hardening times. <br />Only once the screed has reached its permissible residual moisture content, i.e. is ready for laying, should the screed cracks and crack <br />control joints be closed. <br />Observe the technical data sheets of the products mentioned before starting work. <br />Applications that have not been clearly mentioned in this technical data sheet may only be carried out after the technical service department <br />of SCHOMBURG GmbH has been consulted, and after the said department has approved of such a course of action in writing. <br />For detailed information on application, read and observe supplementary technical information no. 19 "Applying ASODUR products".</p> <p>Relevant regulations <br />The recognised standards of construction engineering, the relevant guidelines and current regulations <br />must be observed. <br />Observe applicable safety data sheet! <br />GISCODE: RE 90</p> <p>The rights of the buyer with regard to the quality of our materials are based on our terms and conditions of sale and delivery. Our technical advice team will be happy to advise you <br />in the case of requirements that exceed the scope of the application described here. In order to be binding, a legally binding written confirmation is required. The product description <br />does not release the user from a duty of care. Lay a test area in the event of uncertainty. This version becomes invalid in the event of a new version being issued.</p> <p>SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com <br />3/3</p> <p>04/06/2025</p>
