Technical data sheet ASO®-R011 Tile, brick and stone cleaner
Material number
Contents
Unit of quantity
Packaging
Colour
206501005
1000
L
Container (IBC)
clear
Areas of application As a stone cleaner for removing cement and lime contamination, water scale and calcareous efflorescence As a facade cleaner to remove mortar residues, cement residues and lime deposits As exposed aggregate rinse aid For removing cement residues from the concrete surface caused by production On unplastered masonry and cladding (clinker, quarry stone, exposed aggregate concrete) For cleaning acid-sensitive materials (e.g. wall and floor tiles, mosaic, glass mosaic, steel panels, etc.)
Product features Liquid cleaning material Ready to use leaves no residue dissolves cement residue, concrete and mortar residue, lime secretions and chalky efflorescence
Technical Data Material properties Base material
Amidosulphonic acid
Application Consumption
Depending on the degree of soiling and mix ratio, approx. 250 ml / m²
Application Application 1. Spray ASO®-R011 or apply with an acid-resistant brush 2. The cleaning effect is significantly supported by the uniform mechanical action of the brush or broom 3. Rinse off the removed substances immediately with sufficient clear water. 4. In the event of old or stubborn contaminants, repeat the cleaning process.
Storage conditions Storage Dry, at least 24 months in the original sealed container
SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com 1/2
14/05/2025
Technical data sheet ASO®-R011 Notes Protect surfaces that are not to be treated from the effects of ASO-R011. To prevent colour changes in the substrate to be treated, a pretest is always necessary! The stone and tile manufacturers’ suitability and design recommendations must be observed. As a corrosive substance, ASO-R011 must always be processed with personal protective equipment, e.g. protective clothing, protective gloves and safety goggles! In case of skin contact, rinse immediately with water! Good ventilation must be ensured during application! Structurally sealed containers must be ventilated! For application, never use metal containers or metal devices! Be careful with limestone, marble and sand-lime brick, these are attacked by AO-R011! When using in conjunction with natural stones, preliminary tests should always be carried out!
Observe applicable safety data sheet! GISCODE: GF50
The rights of the buyer with regard to the quality of our materials are based on our terms and conditions of sale and delivery. Our technical advice team will be happy to advise you in the case of requirements that exceed the scope of the application described here. In order to be binding, a legally binding written confirmation is required. The product description does not release the user from a duty of care. Lay a test area in the event of uncertainty. This version becomes invalid in the event of a new version being issued.
SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com 2/2