AQUAFIN-1K-PREMIUM_204609_Englisch.pdf
7 Pages
700 KB
Download
<h1>AQUAFIN-1K-PREMIUM_204609_Englisch.pdf</h1> <p>Technical data sheet <br />AQUAFIN®-1K-PREMIUM <br />1 component Flexible waterproofing slurry</p> <p>Material number</p> <p>Package type</p> <p>Colour</p> <p>Units / pallet</p> <p>Pc/package</p> <p>204609001</p> <p>15 kg, bag</p> <p>blackish brown</p> <p>54,000</p> <p>1,000</p> <p>Areas of use/bonded waterproofing <br />as bonded waterproofing under tiles and boards <br />as bonded waterproofing for water impact class W0-I to W3-I in accordance with DIN 18534 <br />in conjunction with the SCHOMBURG joint tape systems <br />for interior and exterior use</p> <p>Product features <br />Flexible, 1 component waterproofing slurry <br />Crack bridging <br />Can be walked on and overcoated after just ca. 4 hours <br />Vapour permeable</p> <p>Advantages <br />Tested system component <br />rapid construction progress <br />Convenient compaction properties</p> <p>SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com <br />1/7</p> <p>01/06/2026</p> <p>Technical data sheet <br />AQUAFIN®-1K-PREMIUM <br />Existing test certificates <br />General building approval test certificate for producing liquid bonded waterproofing with tiles and boards in accordance with VVTB seq. no. <br />C 3.27 <br />Reaction to fire classification report <br />Impermeability to water in accordance with DIN EN 14891 <br />French cert. VOC <br />AgBB certificate <br />EMICODE licence</p> <p>Technical Data <br />Material properties <br />Product components <br />Base material <br />Consistency <br />Crack bridging DIN EN 1062-7 <br />Sd value DIN EN ISO 7783 (H2O) per mm dry layer thickness <br />Vapour diffusion behaviour <br />Water vapour diffusion resistance µ (DIN EN ISO 7783) <br />Watertightness when installed in accordance with PG MDS/AIV <br />Classification of the reaction to fire in accordance with DIN EN 13501-1</p> <p>1 component system <br />Pre-blended dry mortar <br />Powdered <br />Passed <br />approx. 2.3 m <br />Vapour permeable <br />approx. 2300 <br />to 0,75 bar <br />E</p> <p>Mixing <br />Mixing time <br />Maturing time <br />Water addition</p> <p>approx. 2 - 4 minutes <br />approx. 2 minutes <br />approx. 3.8 l - 4.5 l</p> <p>Application <br />Substrate/application temperature <br />Pot life <br />Method of application, max. layer thickness per application step <br />Wet film thickness (yields 1 mm dry film thickness) <br />Consumption pro m² and mm layer thickness <br />Foot traffic after <br />Ready for covering with tiles <br />Overcoat after <br />Hardening time / light resilience</p> <p>approx. 5 - 30 °C <br />approx. 45 minutes <br />up to 2.5 mm <br />approx. 1.1 mm <br />approx. 1.25 kg/m² <br />approx. 4 hours <br />approx. 4 hours <br />approx. 4 hours <br />approx. 7 days</p> <p>SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com <br />2/7</p> <p>01/06/2026</p> <p>Technical data sheet <br />AQUAFIN®-1K-PREMIUM <br />System components in accordance with AbP AIV <br />ASO-Dichtband-2000 <br />ASO-Dichtband-2000-S <br />ASO-Dichtband-2000-Ecken (Innen und Aussen) <br />ASO-Dichtmanschette-Boden <br />ASO-Dichtmanschette-Wand <br />ASO-Dichtband-120 <br />ASO-Dichtecke-I <br />ASO-Dichtecke-A <br />ASO-Dichtmanschette-W <br />ASO-Dichtmanschette-B <br />ASO-Dichtband-2000-S-Ecken <br />AK7P <br />CARO-FK-FLEX <br />CRISTALLIT-FLEX <br />LIGHTFLEX <br />MONOFLEX <br />MONOFLEX-fast <br />MONOFLEX-FB <br />MONOFLEX-white <br />MONOFLEX-white 3:1 with UNIFLEX-F <br />MONOFLEX-XL <br />SOLOFLEX <br />UNIFIX-S3 <br />UNIFIX-S3-fast <br />ASODUR-EKF</p> <p>Joint Sealing tape</p> <p>Tile adhesive</p> <p>Suitable substrate <br />Concrete <br />Cement-based screed (CT) <br />Floor levelling compounds <br />Calcium sulphate screeds (CA, CAF) <br />Bonded waterproofing <br />Tile bearing elements <br />Gypsum fibre boards</p> <p>Gypsum boards <br />Raised floors <br />Cement and fibre cement boards <br />Decoupling mats & boards <br />Dry screeds <br />Cement plaster <br />Gypsum plaster</p> <p>Lime-cement plaster <br />Light plaster</p> <p>Preparing the substrate <br />Moisture content of the CM measurement</p> <p>max. CM moisture readings <br />CT for screeds on insulation or a separating layer</p> <p>≥ 2,0 CM %</p> <p>CA without floor heating system</p> <p>≥ 0,5 CM %</p> <p>CA with floor heating system</p> <p>≥ 0,3 CM %</p> <p>Application <br />Mixing <br />1. Fill the water into a clean mixing bucket and mix with the powder component with a stirrer to produce a homogeneous, lump-free mass. <br />2. The mixing time is ca. 2 - 4 minutes.</p> <p>SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com <br />3/7</p> <p>01/06/2026</p> <p>Technical data sheet <br />AQUAFIN®-1K-PREMIUM <br />Application <br />1. Prepare the substrate according to the substrate requirements. <br />2. Allow the primer to dry before the subsequent work steps. <br />3. Apply AQUAFIN®-1K-PREMIUM using suitable tools in at least 2 application steps. <br />4. The previous coat must be completely dry before the next coat is applied. <br />5. The minimum dry film thickness of ≥ 2 mm must be guaranteed. <br />6. A sufficient amount of material must be applied to achieve the required dry film thickness in accordance with the desired water impact class. <br />7. Voids must be reworked. <br />8. Tiles and boards are laid (in accordance with DIN 18157-1 in thin-bed laying) after readiness to receive a thin-bed mortar that was tested in the <br />system.</p> <p>Formation of intersections, movement and connecting joints <br />Use the ASO-Dichtband 2000 - System or the ASO-Dichtband-System along with the required pre-formed pieces to form movement and <br />connecting joints, as well to integrated intersections and assembly parts. Bond joint sealing tapes, joint-tape edges or connections with the <br />waterproofing material and fill in the overlap area and the edge zone with filler. Check elements such as linear drainage systems for suitability in <br />advance and include them in the bonded waterproofing in accordance with the manufacturer’s specifications.</p> <p>Cleaning tools <br />Clean tools immediately after use with suitable solvent.</p> <p>Storage conditions <br />Storage <br />Store in a cool and dry place. Min. 9 months in the original canister. Promptly use opened container.</p> <p>Emission behaviour / building certification systems <br />Very low emissions in accordance with GEV-EMICODE, which normally results in positive evaluations within the scope of building <br />certification systems in accordance with DGNB, LEED, BREEAM, HQE. <br />Maximum quality level 4, lines 7 and 8 in accordance with DGNB criteria "ENV 1.2 Risks to the local environment". <br />Suitable for indoor use in accordance with the evaluation scheme of the AgBB (committee for health-related evaluation of building products) <br />and the "French VOC regulation" (French VOC classification regulation and KMR emissions regulation)</p> <p>Notes <br />Direct contact with metals such as copper, zinc, and aluminium must be avoided by means of a pore sealed primer. <br />Dropping below the dew point (condensation) must be prevented during the application and drying phases on the substrate and AQUAFIN® <br />-1K-PREMIUM. <br />Expect a longer drying time in rooms with low temperatures, high humidity and insufficient ventilation. Direct heating is not suitable for these <br />rooms. <br />Protect surfaces that are not to be treated from the effects of AQUAFIN®-1K-PREMIUM! <br />The waterproofing must not be affected by water during binding. The effect of water from behind can lead to spalling in case of frost. <br />The CM measurement must be completed in accordance with the current working instructions FBH-AD from thetechnical information <br />"Interface coordination with heated floor constructions". <br />Protect the product from water, frost, draughts, direct sunlight and mechanical loads until it has dried completely.</p> <p>Relevant regulations <br />Planning, inspection of substrates and building site circumstances, laying, grouting and subsequent <br />care of the work must be done in accordance with the relevant DIN standards and recognised rules of <br />technology (e.g. the ZDB Data sheets of the Zentralverband Deutsches Baugewerbe e.V.(German <br />construction Association) in the latest version. <br />Observe applicable safety data sheet!</p> <p>SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com <br />4/7</p> <p>01/06/2026</p> <p>Technical data sheet <br />AQUAFIN®-1K-PREMIUM <br />Explanations <br />Conformity / Declaration / Verification</p> <p>SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com <br />5/7</p> <p>01/06/2026</p> <p>Technical data sheet <br />AQUAFIN®-1K-PREMIUM <br />System components (conforming to standards) <br />System components</p> <p>Water exposure classes W0-I to W3-I without chemical exposure, in <br />accordance with DIN 18534 and the ZDB technical information sheet <br />"Composite Waterproofing (AIV)"</p> <p>AQUAFIN-1K-PREMIUM</p> <p>X</p> <p>ASO-Unigrund-K</p> <p>X</p> <p>ASO-Unigrund-GE</p> <p>X</p> <p>ASO-Unigrund-S</p> <p>X</p> <p>ASO-Dichtband-2000</p> <p>X</p> <p>ASO-Dichtband-2000-S</p> <p>X</p> <p>ASO-Dichtband-2000-Ecken, (90°, inside/outside)</p> <p>X</p> <p>ASO-Dichtband-2000-S-Ecken, (90°, inside/outside)</p> <p>X</p> <p>ASO-Dichtmanschette-Boden/-Wand</p> <p>X</p> <p>ASO-Dichtband-120</p> <p>X</p> <p>ASO-Dichtmanschette-W</p> <p>X</p> <p>ASO-Dichtecke</p> <p>X</p> <p>ASO-Gefälleecke</p> <p>X</p> <p>ASO-Dichtmanschette-B</p> <p>X</p> <p>UNIFIX-S3</p> <p>X</p> <p>LIGHTFLEX</p> <p>X</p> <p>MONOFLEX-white</p> <p>X</p> <p>MONOFLEX-white modified with UNIFLEX-F in a mass ratio of 3:1</p> <p>X</p> <p>MONOFLEX</p> <p>X</p> <p>MONOFLEX-XL</p> <p>X</p> <p>ASODUR-EKF</p> <p>X</p> <p>CRISTALLFUGE-EPOX</p> <p>X</p> <p>SOLOFLEX</p> <p>X</p> <p>MONOFLEX-fast</p> <p>X</p> <p>AK7P</p> <p>X</p> <p>CRISTALLIT-flex</p> <p>X</p> <p>UNIFIX-S3-fast</p> <p>X</p> <p>SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com <br />6/7</p> <p>01/06/2026</p> <p>Technical data sheet <br />AQUAFIN®-1K-PREMIUM <br />Impact classes and typical applications in accordance with DIN 18534-1 <br />Exposure classes and typical applications according to DIN 18534-1 <br />Water exposure class</p> <p>Water exposure</p> <p>W0-I</p> <p>low</p> <p>W1-I</p> <p>W2-I</p> <p>W3-I</p> <p>moderate</p> <p>high</p> <p>very high</p> <p>Application examples <br />Surfaces not frequently exposed to <br />splashing water</p> <p>Areas frequently exposed to <br />splashing water or occasionally <br />exposed to service water without <br />intensification due to standing water</p> <p>Surfaces frequently exposed to <br />splash water and/or service water, <br />especially on the floor, where <br />exposure is occasionally intensified <br />by standing water <br />Surfaces subject to very frequent or <br />prolonged exposure to splashing and <br />/or service water and/or water <br />from intensive cleaning procedures, <br />intensified by standing water</p> <p>Areas of wall surfaces above sinks and washbasins in <br />domestic kitchens <br />Areas of floor surfaces in domestic areas without drains, <br />e.g., in kitchens, utility rooms, guest restrooms</p> <p>Wall surfaces above bathtubs and in showers in <br />bathrooms <br />Floor surfaces in residential areas with drains <br />Floor surfaces in bathrooms with or without drains, <br />without significant water exposure from the shower area</p> <p>Wall surfaces of showers in sports/commercial facilities <br />Floor surfaces with drains and/or gutters <br />Floor surfaces in rooms with floor-level showers <br />Wall and floor surfaces in sports/commercial facilities</p> <p>Surfaces in the vicinity of swimming pool walkways <br />Surfaces of showers and shower facilities in sports <br />/commercial facilities <br />Surfaces in commercial facilities (commercial kitchens, <br />laundries, breweries, etc.)</p> <p>The rights of the buyer with regard to the quality of our materials are based on our terms and conditions of sale and delivery. Our technical advice team will be happy to advise you <br />in the case of requirements that exceed the scope of the application described here. In order to be binding, a legally binding written confirmation is required. The product description <br />does not release the user from a duty of care. Lay a test area in the event of uncertainty. This version becomes invalid in the event of a new version being issued.</p> <p>SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com <br />7/7</p> <p>01/06/2026</p>
