60.1.19
Page 1/7
Safety data sheet according to UK REACH Printing date 20.05.2025
Version number 13 (replaces version 12)
Revision: 20.05.2025
SECTION 1: Identification of the substance/mixture and of the company/undertaking · 1.1 Product identifier · Trade name: REINIT-BM · 1.2 Relevant identified uses of the substance or mixture and uses advised against No further relevant information available. · Application of the substance / the mixture release agent · 1.3 Details of the supplier of the safety data sheet · Manufacturer/Supplier: SCHOMBURG GmbH & Co. KG Aquafinstr. 2-8 D-32760 Detmold Detmold, Germany ---------------------------------------------Tel: ++49 (0)5231/953-00 Fax: ++49 (0)5231/953-123 Internet: www.schomburg.de · Informing department: Department: Environment and Safety ************************************ If you have any questions about the Environment and Safety Department, please contact our department. e-mail: SDB@schomburg.de · 1.4 Emergency telephone number: Poison centre Berlin (24 hours) German & English Tel: ++49 (0)30/30686700 SECTION 2: Hazards identification · 2.1 Classification of the substance or mixture · Classification according to Regulation (EC) No 1272/2008 The product is not classified, according to the GB CLP regulation. · 2.2 Label elements · Labelling according to Regulation (EC) No 1272/2008 Void · Hazard pictograms Void · Signal word Void · Hazard statements Void · Additional information: EUH210 Safety data sheet available on request. · 2.3 Other hazards Not anwendbar. · Results of PBT and vPvB assessment · PBT: Not applicable. · vPvB: Not applicable. SECTION 3: Composition/information on ingredients · 3.2 Mixtures · Description: Preparation, contains paraffinic and naphtenic hydrocarbons. (Contd. on page 2) GB
Page 2/7
Trade name: REINIT-BM (Contd. of page 1)
· Dangerous components: CAS: 64742-55-8 Distillates (petroleum), hydrotreated light paraffinic EINECS: 265-158-7 Asp. Tox. 1, H304 Index number: 649-468-00-3 · Additional information For the wording of the listed hazard phrases refer to section 16.
25-50%
SECTION 4: First aid measures · 4.1 Description of first aid measures · General information Personal protection for the First Aider. It is possible to choke in case of vomiting in unconsciousness. Bring unconscious persons into a stable position on side. Keep the respiratory tract free (remove dentures and vomiting). Check the pulse. In case of heart failure you have to make a cardiac massage. In case of stoppage of breathing: artificial respiration. Take up a doctor immediately! · After inhalation Supply fresh air or oxygen; call for doctor. · After skin contact Change immediately heavy contaminated clothes. · After eye contact Gently rinse the eyes under running water for at least 10 minutes with the eyelids open. If possible, remove any contact lenses and continue rinsing. Consult a doctor. · After swallowing Do not induce vomiting; instantly call for medical help. In the event of spontaneous vomiting, keep the head below hip height to prevent aspiration of the product. Show the packaging or the label to the doctor. · 4.2 Most important symptoms and effects, both acute and delayed No further relevant information available. · 4.3 Indication of any immediate medical attention and special treatment needed No further relevant information available. SECTION 5: Firefighting measures · 5.1 Extinguishing media · Suitable extinguishing agents Water spray jet Use fire fighting measures that suit the environment. · For safety reasons unsuitable extinguishing agents Water with a full water jet. · 5.2 Special hazards arising from the substance or mixture No further relevant information available. · 5.3 Advice for firefighters · Protective equipment: Wear full protective suit. Wear self-contained breathing apparatus. · Additional information Follow the emergency-plan. Burst- and explosion-danger by increasing pressure. In case of fire chill the container with water spray. SECTION 6: Accidental release measures · 6.1 Personal precautions, protective equipment and emergency procedures Avoid eye- and skin contact. Bring persons out of danger. Wear protective equipment. Keep unprotected persons away. (Contd. on page 3) GB
Page 3/7
Trade name: REINIT-BM (Contd. of page 2)
Wear protective clothing. · 6.2 Environmental precautions: Do not allow product to reach sewage system or water bodies. Inform respective authorities in case product reaches water or sewage system. · 6.3 Methods and material for containment and cleaning up: Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust). · 6.4 Reference to other sections See Section 7 for information on safe handling See Section 8 for information on personal protection equipment. See Section 13 for information on disposal. SECTION 7: Handling and storage · 7.1 Precautions for safe handling Keep away from heat and direct sunlight. Keep out of the reach of children · Information about protection against explosions and fires: No special measures required. · 7.2 Conditions for safe storage, including any incompatibilities · Storage · Requirements to be met by storerooms and containers: Store only in the original container. · Information about storage in one common storage facility: Store away from oxidising agents. Please follow the rules of the VCI-Storage-Concept for chemicals. · Further information about storage conditions: Protect from frost. Store in cool, dry conditions in well sealed containers. Store in a locked cabinet and out of the reach of children. · 7.3 Specific end use(s) No further relevant information available. SECTION 8: Exposure controls/personal protection · 8.1 Control parameters · Components with critical values that require monitoring at the workplace: The product does not contain any relevant quantities of materials with critical values that have to be monitored at the workplace. · Additional information: The lists that were valid during the compilation were used as basis. · 8.2 Exposure controls · Appropriate engineering controls It must be possible to wash the skin in the working area. Eye-wash bottle must be available. · Individual protection measures, such as personal protective equipment · General protective and hygienic measures The usual precautionary measures should be adhered to in handling the chemicals. Keep away from foodstuffs, beverages and food. Avoid contact with the eyes and skin. Do not eat, drink or smoke while working. Use skin protection cream for preventive skin protection. Be sure to clean skin thoroughly after work and before breaks. · Breathing equipment: Not required. · Hand protection In case of wearing synthetic protective gloves use cotton-gloves as underwear. The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation (Contd. on page 4) GB
Page 4/7
Trade name: REINIT-BM (Contd. of page 3)
· Material of gloves Gloves made of: Natural latex, polychloroprene, nitrile rubber. (Chemical protection gloves of category 3, recognisable by the CE mark with four-digit test number). The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application. · Penetration time of glove material The exact break trough time has to be found out by the manufacturer of the protective gloves and has to be observed. · Not suitable are gloves made of the following materials: Leather gloves Strong gloves · Eye/face protection Suitable safety goggles in accordance with DIN EN 166. · Body protection: Protective work clothing. SECTION 9: Physical and chemical properties · 9.1 Information on basic physical and chemical properties · General Information · Physical state Liquid · Colour: Light yellow · Smell: Characteristic · Odour threshold: Not determined. · Melting point/freezing point: Not determined · Boiling point or initial boiling point and boiling range 100 °C · Flammability Not applicable. · Lower and upper explosion limit · Lower: Not determined. · Upper: Not determined. · Flash point: 155 °C · Decomposition temperature: Not determined. · pH Mixture is non-soluble (in water). · Viscosity: · Kinematic viscosity at 40 °C 25 mm²/s · dynamic at 20 °C: 58 mPas · Solubility · Water: Not miscible or difficult to mix · Partition coefficient n-octanol/water (log value) Not determined. · Steam pressure: Not determined. · Density and/or relative density · Density at 20 °C 0.891 g/cm³ · Relative density Not determined. · Vapour density Not determined. · 9.2 Other information · Appearance: · Form: Fluid · Important information on protection of health and environment, and on safety. · Self-inflammability: Product is not selfigniting. · Explosive properties: Product is not explosive. (Contd. on page 5) GB
Page 5/7
Trade name: REINIT-BM (Contd. of page 4)
· Change in condition · Evaporation rate · Information with regard to physical hazard classes · Explosives · Flammable gases · Aerosols · Oxidising gases · Gases under pressure · Flammable liquids · Flammable solids · Self-reactive substances and mixtures · Pyrophoric liquids · Pyrophoric solids · Self-heating substances and mixtures · Substances and mixtures, which emit flammable gases in contact with water · Oxidising liquids · Oxidising solids · Organic peroxides · Corrosive to metals · Desensitised explosives
Not determined.
Void Void Void Void Void Void Void Void Void Void Void Void Void Void Void Void Void
SECTION 10: Stability and reactivity · 10.1 Reactivity No further relevant information available. · 10.2 Chemical stability · Thermal decomposition / conditions to be avoided: No decomposition if used according to specifications. · 10.3 Possibility of hazardous reactions Reacts with strong oxidizing agents · 10.4 Conditions to avoid No further relevant information available. · 10.5 Incompatible materials: Strong oxidationresorts · 10.6 Hazardous decomposition products: No dangerous decomposition products known SECTION 11: Toxicological information · 11.1 Information on hazard classes as defined in Regulation (EC) No 1272/2008 · Acute toxicity Based on available data, the classification criteria are not met. · LD/LC50 values that are relevant for classification: 64742-55-8 Distillates (petroleum), hydrotreated light paraffinic Oral LD/LC50 >2,000 mg/kg (rats) · Primary irritant effect: No irritant action known. · Skin corrosion/irritation Based on available data, the classification criteria are not met. · Serious eye damage/irritation Irritate-effect is possible. Based on available data, the classification criteria are not met. · Respiratory or skin sensitisation No sensibility by skincontact. Based on available data, the classification criteria are not met. · Germ cell mutagenicity Based on available data, the classification criteria are not met. · Carcinogenicity Based on available data, the classification criteria are not met. · Reproductive toxicity Based on available data, the classification criteria are not met. · STOT-single exposure Based on available data, the classification criteria are not met. · STOT-repeated exposure Based on available data, the classification criteria are not met. (Contd. on page 6) GB
Page 6/7
Trade name: REINIT-BM (Contd. of page 5)
· Aspiration hazard Based on available data, the classification criteria are not met. · Other information (about experimental toxicology): Inhalation of vapours and haze may cause irritations. · 11.2 Information on other hazards · Endocrine disrupting properties None of the ingredients is listed. *
SECTION 12: Ecological information · 12.1 Toxicity · Aquatic toxicity: 64742-55-8 Distillates (petroleum), hydrotreated light paraffinic EC/LC50 >100 mg/l (aqo) · 12.2 Persistence and degradability No further relevant information available. · 12.3 Bioaccumulative potential Contains components with potential bioaccumultation. · 12.4 Mobility in soil No further relevant information available. · 12.5 Results of PBT and vPvB assessment · PBT: Not applicable. · vPvB: Not applicable. · 12.6 Endocrine disrupting properties The product does not contain substances with endocrine disrupting properties. · 12.7 Other adverse effects · Additional ecological information: · General notes: Water danger class 3 (Self-assessment): extremely hazardous for water. Do not allow product to reach ground water, water bodies or sewage system, even in small quantities. Danger to drinking water if even extremely small quantities leak into soil. SECTION 13: Disposal considerations · 13.1 Waste treatment methods · Recommendation Must not be disposed of together with household garbage. Do not allow product to reach sewage system. · Uncleaned packagings: · Recommendation: Disposal must be made according to official regulations. SECTION 14: Transport information · 14.1 UN number or ID number · ADR, IMDG, IATA
Void
· 14.2 UN proper shipping name · ADR, IMDG, IATA
· 14.3 Transport hazard class(es) · ADR, ADN, IMDG, IATA · Class
· 14.4 Packing group · ADR, IMDG, IATA
· 14.5 Environmental hazards: · Marine pollutant:
No (Contd. on page 7) GB
Page 7/7
Trade name: REINIT-BM (Contd. of page 6)
· 14.6 Special precautions for user
Not applicable.
· 14.7 Maritime transport in bulk according to IMO instruments Not applicable. · UN "Model Regulation":
SECTION 15: Regulatory information · 15.1 Safety, health and environmental regulations/legislation specific for the substance or mixture · Poisons Act · Regulated explosives precursors None of the ingredients is listed. · Regulated poisons None of the ingredients is listed. · Reportable explosives precursors None of the ingredients is listed. · Reportable poisons None of the ingredients is listed. · Directive 2012/18/EU · Named dangerous substances - ANNEX I None of the ingredients is listed. · 15.2 Chemical safety assessment: A Chemical Safety Assessment has not been carried out. SECTION 16: Other information These data are based on our present knowledge. However, they shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship. · Relevant phrases H304 May be fatal if swallowed and enters airways. · Department issuing data specification sheet: Environment protection department. · Abbreviations and acronyms: ADR: Accord relatif au transport international des marchandises dangereuses par route (European Agreement Concerning the International Carriage of Dangerous Goods by Road) IMDG: International Maritime Code for Dangerous Goods IATA: International Air Transport Association GHS: Globally Harmonised System of Classification and Labelling of Chemicals EINECS: European Inventory of Existing Commercial Chemical Substances ELINCS: European List of Notified Chemical Substances CAS: Chemical Abstracts Service (division of the American Chemical Society) LC50: Lethal concentration, 50 percent LD50: Lethal dose, 50 percent PBT: Persistent, Bioaccumulative and Toxic vPvB: very Persistent and very Bioaccumulative Asp. Tox. 1: Aspiration hazard – Category 1
· * Data compared to the previous version altered. GB