Folder_SCHOMBURG_RESIL-NB150_EN_0124web.pdf
6 Pages
614 KB
Download
<h1>Folder_SCHOMBURG_RESIL-NB150_EN_0124web.pdf</h1> <p>SCHOMBURG <br />Problems Solved.</p> <p>RESIL® - NB150 <br />Evaporation protection <br />for after-treatment of concrete.</p> <p>schomburg.com</p> <p>Concrete after-treatment <br />agent <br />RESIL®-NB150 <br />For the after-treatment of horizontal concrete surfaces. <br />Forms a protective film that protects the concrete from <br />external influences such as wind and sunlight, thus reducing <br />the evaporation of the water from the concrete. <br />This significantly reduces crack formation in the concrete. <br />RESIL-NB150 is ready to use and is sprayed onto <br />the 'green' concrete. Protects from premature drying out.</p> <p>Technical data <br />Packaging</p> <p>1000 l container <br />215 l drum <br />25 l canister <br />10 l canister</p> <p>Density</p> <p>ca. 0.98 g/cm²</p> <p>Application <br />temperature</p> <p>from ca. +5 °C</p> <p>Dosing</p> <p>120–150 g/m²</p> <p>Water hazard class 1 (self-classification) <br />Designation</p> <p>After-treatment agent BM <br />(based on TL NBM-StB 09)</p> <p>Advantages for the user <br />Sprayable <br />Minimises shrinkage cracks</p> <p>Areas of use <br />• Concrete. <br />• Screed. <br />• Cement-based plaster. <br />• Horizontal and vertical application. <br />• For the after-treatment of the aforementioned surfaces. <br />Properties <br />• Ready to use. <br />• Solvent-free. <br />• Hydrophobic. <br />• Surface stabilising. <br />• Very low-emission - EMICODE EC1-PLUS. <br />• Fulfils AgBB formula requirements.</p> <p>schomburg.com</p> <p>Further products <br />for concrete or screed: <br />For concrete or cement-based screeds, SCHOMBURG <br />offers various solutions to harden and protect them. <br />Below is a small overview of our products.</p> <p>Concrete and screed coatings <br />There are various options for coating concrete <br />or screed. For example, the screed can be <br />provided with air pores to increase the freezethaw resistance <br />(ASOLIT-LP/K) or a sealant <br />(ASOLIT-DMK) can be used to reduce water <br />penetration. With our REMISIL range, various <br />consolidating agents or impregnating agents <br />are available. <br />Release agent <br />ASIKON-5005 can be used for wooden, <br />plastic, steel and matrix formwork. The release <br />agent is sprayed thinly onto the formwork.</p> <p>After-treatment agent <br />RESIL-NB150 forms a protective film which <br />protects the fresh concrete and protects it from <br />premature drying out. The product is ready to <br />use and is particularly effective at high <br />temperatures and with winds. <br />Cleaner <br />We provide cleaners for various fields of <br />application. We recommend ASO-R005 to <br />remove cement residue, efflorescence and lime <br />bloom from concrete or screed surfaces.</p> <p>Subject to change. The valid issue of the corresponding technical data sheet legally applies. <br />01/24 RiR/JD/LaA</p> <p>SCHOMBURG GmbH <br />Aquafinstrasse 2–8 <br />D-32760 Detmold (Germany) <br />Telephone +49-5231-953-00 <br />Fax <br />+49-5231-953-333 <br />www.schomburg.com</p>
