European_Model_EPD_polyurethane_or_silane-modified-polymer_group_3_2022-06-01.pdf
13 Pages
3.66 MB
Download
<h1>European_Model_EPD_polyurethane_or_silane-modified-polymer_group_3_2022-06-01.pdf</h1> <p>ENVIRONMENTAL PRODUCT DECLARATION <br />as per ISO 14025 and EN 15804+A2 <br />Owner of the Declaration</p> <p>DBC, EFCC, FEICA, IVK</p> <p>Programme holder</p> <p>Institut Bauen und Umwelt e.V. (IBU)</p> <p>Publisher</p> <p>Institut Bauen und Umwelt e.V. (IBU)</p> <p>Declaration number</p> <p>EPD-FEI-20220107-IBG1-EN</p> <p>Issue date</p> <p>01.06.2022</p> <p>Valid to</p> <p>31.05.2027</p> <p>Products based on polyurethane or silane-modified <br />polymer, group 3 <br />DBC - Deutsche Bauchemie e.V. <br />EFCC - European Federation for Construction Chemicals <br />FEICA - Association of the European Adhesive and Sealant Industry <br />IVK - Industrieverband Klebstoffe e.V.</p> <p>www.ibu-epd.com | https://epd-online.com</p> <p>Umwelt Produktdeklaration Name des Herstellers – Name des Produkts</p> <p>1. General Information <br />DBC - Deutsche Bauchemie e.V. <br />EFCC - European Federation for <br />Construction Chemicals <br />FEICA - Association of the European <br />Adhesive and Sealant Industry <br />IVK - Industrieverband Klebstoffe e.V.</p> <p>Products based on polyurethane or <br />silane-modified polymer, group 3</p> <p>Programme holder <br />IBU – Institut Bauen und Umwelt e.V. <br />Hegelplatz 1 <br />10117 Berlin <br />Germany</p> <p>Owner of the declaration <br />DBC, Mainzer Landstr. 55, D-60329 Frankfurt a.M. <br />EFCC, 172 Boulevard du Triomphe, B-1160 Brussels <br />FEICA, Rue Belliard 40, B-1040 Brussels <br />IVK, Völklingerstr. 4, D-40219 Düsseldorf</p> <p>Declaration number <br />EPD-FEI-20220107-IBG1-EN</p> <p>Declared product / declared unit <br />1 kg product based on polyurethane or silanemodified polymer; density 1.25 - 1.8 g/cm³</p> <p>This declaration is based on the product <br />category rules: <br />Reaction resin products, 07.2014 <br />(PCR checked and approved by the SVR)</p> <p>Scope:</p> <p>Issue date <br />01.06.2022 <br />Valid to <br />31.05.2027</p> <p>This verified EPD entitles the holder to bear the symbol <br />of the Institut Bauen und Umwelt e.V. It exclusively <br />applies for products produced in Europe and for a <br />period of five years from the date of issue. This EPD <br />may be used by members of DBC, EFCC, FEICA and <br />IVK and their members provided it has been proven <br />that the respective product can be represented by this <br />EPD. For this purpose a guideline is available at the <br />secretariats of the four associations. The members of <br />the associations are listed on the respective websites. <br />The owner of the declaration shall be liable for the <br />underlying information and evidence; the IBU shall not <br />be liable with respect to manufacturer information, life <br />cycle assessment data and evidences. <br />The EPD was created according to the specifications <br />of EN 15804+A2. In the following, the standard will be <br />simplified as EN 15804. <br />Verification</p> <p>Dipl. Ing. Hans Peters <br />(chairman of Institut Bauen und Umwelt e.V.)</p> <p>Dr. Alexander Röder <br />(Managing Director Institut Bauen und Umwelt e.V.))</p> <p>The standard EN 15804 serves as the core PCR <br />Independent verification of the declaration and data <br />according to ISO 14025:2011 <br />internally <br />x externally</p> <p>Matthias Schulz <br />(Independent verifier)</p> <p>2. Product <br />2.1 <br />Product description/Product definition <br />This EPD comprises reactive products based on <br />polyurethane (PU) or silane-modified polymer (SMP) <br />with a volatile organic compound (VOC) content >1 % <br />and ≤10 % (VOC definition according to Decopaint <br />Directive) and a castor oil/-derivatives content ≤10 %. <br />The one- or two-component reactive PU products are <br />manufactured using polyols and isocyanates. Reactive <br />products based on SMP polymers are usually <br />manufactured as a one-component system from <br />polyols and alkoxysilane in a preliminary stage. The <br />aqueous systems consist of (a) dispersion and are <br />crosslinked by a dispersible isocyanate. The products <br />2</p> <p>fulfil manifold, often specific, functions in the <br />construction, furnishing and repair of buildings. The <br />product displaying the highest environmental impacts <br />was used as a representative product for calculating <br />the Life Cycle Assessment results (worst-case <br />approach). <br />For the placing on the market in the European <br />Union/European Free Trade Association (EU/EFTA) <br />with the exception of Switzerland) products falling <br />under Regulation (EU) No 305/2011 (CPR) need a <br />Declaration of Performance taking into consideration <br />either the relevant harmonised European standard or</p> <p>Environmental Product Declaration FEICA/EFCC/IVK/DBC – Products based on polyurethane or silane-modified polymer, <br />group 3</p> <p>the European Technical Assessment and the CE <br />marking. For the application and use of the products <br />the respective national provisions apply. <br />2.2 <br />Application <br />Products based on polyurethane or silane-modified <br />polymer, group 3, are used for the following <br />applications: <br />Module 1: Adhesives for parquet and floor <br />coverings <br />Parquet adhesives in accordance with EN ISO 17178 <br />for wooden and parquet floors and flooring adhesives <br />in accordance with EN ISO 22636 for floor coverings <br />Module 2: Reactive products for protecting and <br />repairing concrete structures <br />Products for increasing the durability of concrete and <br />reinforced concrete structures as well as for new <br />concrete and for maintenance and repair work <br />(requirements 2.1), products for structural bonding of <br />strengthening materials to an existing concrete <br />structure (requirements 2.2) and products for concrete <br />injection for filling cracks, voids and interstices in <br />concrete (requirements 2.3)</p> <p>self-expanding, ready to use polyurethane foam used <br />for various construction applications. It consists of a <br />low viscous semi-fluid in a can that leaves the can as a <br />froth and immediately forms a polyurethane foam. <br />12.1 Window & External Door Sealing & Insulation: <br />Installing mechanically fixed external windows and <br />doors with an OCF, as part of a system including <br />sealants and tapes <br />12.2 Door Installation & Fixation: <br />Fixing interior doors with an OCF <br />12.3 General Gap Filling: <br />Filling of regularly and irregularly shaped spaces <br />between at least two surfaces made of typical building <br />materials with a one-component foam (OCF) <br />Module 13: Sealants for glazing <br />Two-component reactive sealants are to be used as <br />the second barrier of the structural hermetic seal in <br />insulating glass units. <br />Module 14: Bonded glazing sealants <br />One- and two-component reactive sealants are used <br />for the bonding of insulating glass units in the window <br />frame.</p> <p>Module 3: Liquid-applied roof waterproofing kits <br />Reactive products for waterproofing roof constructions <br />which are applied on site</p> <p>2.3 <br />Technical Data <br />The density of the products is between 1,25 and 1,8 <br />g/cm³, other relevant technical data can be found in the <br />manufacturer’s technical documentation.</p> <p>Module 4: Reactive products for liquid-applied <br />bridge deck waterproofing kits <br />Products for liquid-applied waterproofing for use on <br />concrete bridge decks</p> <p>Module 1: Reactive products as adhesive for <br />parquet and floor coverings <br />The minimum requirements of EN ISO 17178 and EN <br />ISO 22636 must be maintained.</p> <p>Module 5: Screed material, floor screeds and <br />decorative floors <br />Products for screed/synthetic resin screed for use in <br />floor constructions</p> <p>Module 2: Reactive products for protecting and <br />repairing concrete structures <br />2.1 The requirements on essential characteristics for <br />all intended uses in accordance with EN 1504-2, <br />Tables 1 and 5 must be maintained. These are: <br />- Permeability to CO2 (EN 1062-6) <br />- Water vapour permeability (EN ISO 7783-1/-2) <br />- Capillary absorption and permeability to water (EN <br />1062-3) <br />- Adhesive strength by pull-off test (EN 1542) <br />2.2 Essential characteristics for all intended uses in <br />accordance with EN 1504-4, Tables 3.1 and 3.2 <br />(manufacturer's declaration of performance) <br />2.3 Requirements on essential characteristics for all <br />intended uses in accordance with EN 1504-5, Table 3: <br />- Injectability (EN 1771) <br />- Viscosity (EN ISO 3219) <br />Further essential characteristics in accordance with the <br />manufacturer's technical documentation/declaration of <br />performance</p> <p>Module 6: Reactive products as an adhesive for <br />tiles <br />Tile adhesives for internal and external tile installations <br />on walls, floors and ceilings <br />Module 7: Adhesives and sealants <br />Reactive products for use as: <br />· Structural and repair adhesives <br />· Surface and joint sealants <br />Applications in accordance with the manufacturer's <br />technical documentation/declaration of performance <br />Module 8: Reactive products for watertight <br />covering kits <br />Products for waterproofing floors and/or walls in wet <br />rooms inside buildings <br />Module 9: Reactive products for liquid-applied <br />waterproofing <br />Liquid applied products for waterproofing of buildings <br />Module 10: Reactive products for waterproofing <br />and/or for pre-treating mineral substrates <br />Applications in accordance with the manufacturer's <br />technical documentation <br />Module 11: Liquid-applied waterproofing <br />membranes for use beneath ceramic tiling <br />Module 12: One-component foam (OCF) <br />One component foam in a can is a one-component, <br />3</p> <p>Module 3: Liquid-applied roof waterproofing kits <br />The minimum requirements of EAD 030350-00-0402 <br />Liquid-applied roof waterproofing kits must be <br />maintained. The essential characteristics are to be <br />specified in accordance with the European Technical <br />Assessment (ETA, specification no.). <br />Module 4: Reactive products for liquid-applied <br />bridge deck waterproofing kits <br />The minimum requirements of ETAG 033 Liquidapplied bridge deck waterproofing kits must be <br />maintained. The essential characteristics are to be <br />specified in accordance with the European Technical <br />Assessment (ETA, specification no.).</p> <p>Environmental Product Declaration FEICA/EFCC/IVK/DBC – Products based on polyurethane or silane-modified polymer, <br />group 3</p> <p>Module 5: Screed material, floor screeds and <br />decorative floors <br />The requirements on essential characteristics <br />according to EN 13813 'Screed material and floor <br />screeds – Screed materials – Properties and <br />requirements'/ must be maintained. For synthetic resin <br />screeds, these are: <br />- Bond strength (EN 13892-8) <br />- Reaction to fire (EN 13501-1) <br />Further essential characteristics in accordance with the <br />manufacturer's technical documentation / declaration <br />of performance <br />Module 6: Reactive products as an adhesive for <br />tiles <br />The requirements on essential characteristics <br />according to EN12004, must be maintained. These <br />are: <br />-Tensile adhesion strength after dry storage (EN <br />12004-2) <br />-Tensile adhesion strength after water immersion (EN <br />12004-2) <br />-Tensile adhesion strength after heat ageing (EN <br />12004-2) <br />-Tensile adhesion strength after freeze/thaw cycles <br />(EN 12004-2) <br />-Open time: Tensile strength (EN 12004-2) <br />Further essential characteristics in accordance with the <br />manufacturer's technical documentation <br />Module 7: Adhesives and sealants <br />Performance characteristics in accordance with the <br />manufacturer's technical documentation/declaration of <br />performance <br />Module 8: Reactive products for watertight <br />covering kits <br />The minimum requirements of EAD 030352-00-0503 <br />Liquid applied watertight covering kits for wet room <br />floors and/or walls must be maintained. The essential <br />characteristics are to be specified in accordance with <br />the European Technical Assessment (ETA, <br />specification no.). <br />Module 9: Reactive products for liquid-applied <br />waterproofings <br />The minimum requirements of the test principles <br />regarding the issuing of general building authority test <br />certificates for liquid-applied products for waterproofing <br />of buildings (PG-FLK) must be maintained. The <br />characteristics for the proof of usability are to be <br />specified in accordance with the test principles for <br />granting general building authority test certificates for <br />liquid applied polymer products for waterproofing <br />buildings <br />Module 10: Reactive products for waterproofing <br />and/or for pre-treating mineral substrates <br />Name</p> <p>Value</p> <p>Unit</p> <p>Density acc. to EN ISO 2811-1 <br />700 - 1800 kg/m3 <br />Shore hardness A acc. to ISO 48>15 <br />4 <br />Shore hardness D acc. to ISO 48>5 <br />4 <br />Viscosity acc. to ISO 3219-2 <br /><100 <br />Pas <br />Other performance characteristics in accordance with <br />the manufacturer's technical <br />documentation/declaration of performance</p> <p>4</p> <p>Module 11: Liquid-applied waterproofing <br />membranes for use beneath ceramic tiling <br />The minimum requirements on essential <br />characteristics according to EN 14891 - Liquid applied <br />water-impermeable products for use beneath ceramic <br />tiling - Definitions, specifications and test methodsmust be maintained. These are: <br />- Initial tensile adhesion strength <br />- Tensile adhesion strength after water contact <br />- Tensile adhesion strength after heat ageing <br />- Tensile adhesion strength after freeze-thaw cycles <br />- Waterproofing <br />- Crack bridging ability <br />Module 12: One-Component Foams <br />Physical data of the one-component foam must be <br />indicated in accordance with the respective product <br />standards; these can include, for example: <br />12.1 Window & External Door Sealing & Insulation <br />Tensile Strength EN 17333-4, Movement Capability <br />EN 17333-4, Curing Pressure EN 17333-2, Thermal <br />conductivity EN 17333-5, Sound Insulation EN ISO <br />717-1, Post expansion EN 17333-2 <br />12.2 Door Installation & Fixation <br />Shear Strength EN 17333-4, Tensile Strength <br />EN 17333-4, Compression Strength EN 17333-4, <br />Curing pressure EN 17333-2 <br />12.3 General Gap Filling <br />Sagging EN 17333-3 Other performance <br />characteristics in accordance with the manufacturer's <br />technical documents/declaration of performance. <br />Module 13: Sealants for glazing <br />Reactive sealants must comply with EN 1279-4 <br />Performance characteristics in accordance with the <br />manufacturer's technical documentation/declaration of <br />performance <br />Module 14: Bonded glazing sealants <br />Reactive sealants must comply with RAL-GZ 716 part <br />2 and ift-Guideline VE-08/4. <br />Performance characteristics in accordance with the <br />manufacturer's technical documentation/declaration of <br />performance</p> <p>2.4 <br />Delivery status <br />Liquid or pasty in containers made of tinplate or plastic <br />packed in separate or combi-containers for the <br />required mixing ratio. Packages containing one kg of <br />product in different types of containers. Sealants in <br />plastic cartridges and foil packs. Typical container <br />sizes contain 10 to 25 kg of material. For major works, <br />vats containing approx. 200 kg or IBCs (intermediate <br />bulk containers) containing 1 tonne or more are also <br />used. The LCA is based on tinplate, plastic and wood <br />packaging. <br />2.5 <br />Base materials/Ancillary materials <br />Products based on polyurethane or silane-modified <br />polymer with a VOC content >1 % and ≤10 % and a</p> <p>Environmental Product Declaration FEICA/EFCC/IVK/DBC – Products based on polyurethane or silane-modified polymer, <br />group 3</p> <p>castor oil/-derivatives content ≤10 % usually comprise <br />a reactive polymer and a crosslinking system. The <br />polymer component contains polyether and/or <br />polyester polyols. Crosslinking takes place after <br />installation on site. In the case of two-component <br />systems, this involves the use of pre-polymers and <br />polymers based on typically methylene diphenyl <br />diisocyanate (MDI), toluene diisocyanate (TDI), <br />hexamethylene diisocyanate (HDI) or isophorone <br />diisocyanate (IPDI). The resin mixing ratio is adjusted <br />according to the stoichiometric requirements. <br />Crosslinking starts directly after the components have <br />been mixed. There are also one-component reactive <br />polymer formulations based on PU or SMP which <br />crosslink in the presence of moisture. They comprise <br />prepolymers based on e.g. MDI, TDI, HDI, IPDI or <br />those with alkoxy-silane groups in the case of SMP <br />formulations. In formulations with aqueous dispersions <br />dispersible isocyanates are used for crosslinking. The <br />formulations can contain auxiliary materials such as <br />accelerators, catalysts, wetting agents, foam regulators <br />and viscosity regulators for fine-tuning the product <br />features. Typically, the products covered by this EPD <br />contain the following ranges of base materials and <br />auxiliaries: <br />Polyol component: up to approx. 50 % <br />Crosslinking component: up to approx. 95 % <br />SMP component: up to approx. 80 % <br />Plasticiser: ~ 0-25 % <br />Additives / Pigments: ~ 0-30 % <br />Water: ~ 0-60 % <br />VOC: >1 % and ≤10 % according to the Decopaint <br />Directive (mandatory) <br />Castor oil and derivatives: ≤10 % (mandatory) <br />These ranges are average values and the composition <br />of products complying with the EPD can deviate from <br />these concentration levels in individual cases. More <br />detailed information is available in the respective <br />manufacturer's documentation (e.g. product data <br />sheets). <br />Note: For companies to declare their products within <br />the scope of this EPD it is not sufficient to simply <br />comply with the product composition shown above. <br />The application of this EPD is only possible for <br />member companies of DBC, EFCC, FEICA, and IVK <br />member associations and only for specific formulations <br />with a total score below the declared maximum score <br />for a product group according to the associated <br />guidance document. <br />1. substances from the “Candidate List of <br />Substances of Very High Concern for <br />Authorisation” (SVHC) <br />If this product contains substances listed in the <br />candidate list (latest version) exceeding 0.1 <br />percentage by mass, the relevant information can be <br />found in the safety data sheet of the relevant product <br />covered by this model EPD. <br />2. CMR substances in categories 1A and 1B <br />If this product contains other carcinogenic, mutagenic, <br />reprotoxic (CMR) substances in categories 1A or 1B <br />which are not on the candidate list, exceeding 0.1 <br />percentage by mass, the relevant information can be <br />found in the safety data sheet of the relevant product <br />covered by this model EPD. <br />3. Biocide products added to the construction <br />product <br />If this construction product contains biocide products, <br />the active substances, information on the <br />5</p> <p>concentration and/or concentration range, the product <br />type together with information on their hazardous <br />properties are listed in the safety data sheet of the <br />respective product. <br />2.6 <br />Manufacture <br />The components of the formulation are usually mixed <br />batch-wise and packaged for delivery. <br />2.7</p> <p>Environment and health during <br />manufacturing <br />As a general rule, no other environmental protection <br />measures other than those specified by law are <br />necessary. <br />2.8 <br />Product processing/Installation <br />Products based on polyurethane or silane-modified <br />polymer, are processed by trowelling/knife-coating or <br />rolling, pouring, spraying or injection. <br />Precautions for safe handling and storage (e.g. air <br />exchange, exhaust ventilation, personal protective <br />measures, precautions required in the handling of <br />isocyanates, conditions for safe storage) must be <br />observed in accordance with the information on the <br />safety data sheet. <br />2.9 <br />Packaging <br />A detailed description of packaging is provided in <br />section 2.4. Empty containers and clean foils can be <br />recycled. <br />2.10 Condition of use <br />During the use phase, products based on polyurethane <br />or silane-modified polymer are crosslinked and <br />essentially comprise an inert three-dimensional <br />network. They are long-lasting products which protect <br />our buildings in the form of adhesives, coatings or <br />sealants as well as make an essential contribution in <br />retaining their function and long-term value. <br />2.11 Environment and health during use <br />Option 1: Products for applications outside indoor <br />areas with permanent stays by people <br />During use, the reactive products lose their reactive <br />properties and become inert. No risks are known for <br />water, air and soil if the products are used as <br />designated. <br />Option 2: Products for applications inside indoor <br />areas with permanent stays by people <br />When used in indoor areas with permanent stays by <br />people, evidence of the emission performance of <br />construction products in contact with indoor air must be <br />submitted according to national requirements (see <br />chapter 7). No further influences by emissions on the <br />environment and health are known. <br />2.12 Reference service life <br />Cured products based on polyurethane or silanemodified polymer fulfil manifold, often specific functions <br />in the construction or refurbishment of building <br />structures. They decisively improve the usability of <br />building structures and significantly extend their <br />original service lives. The anticipated reference service <br />life depends on the specific installation situation and <br />the exposure associated with the product. It can be <br />influenced by weathering as well as mechanical or <br />chemical loads.</p> <p>Environmental Product Declaration FEICA/EFCC/IVK/DBC – Products based on polyurethane or silane-modified polymer, <br />group 3</p> <p>2.13</p> <p>Extraordinary effects</p> <p>Fire <br />Even without any special fire safety features, cured <br />products based on polyurethane or silane-modified <br />polymer comply with at least the requirements of EN <br />13501-1 standard for fire classes E and Efl. In terms of <br />the volumes applied, they have only a marginal <br />influence on the fire performance characteristics (e.g. <br />smoke gas development) of the building structure in <br />which they have been installed. As crosslinked <br />polyurethane systems do not melt or drip, they do not <br />contribute towards spreading fire. <br />Water <br />Cured reactive products based on polyurethane or <br />silane-modified polymer are chemically inert and <br />insoluble in water. They are often used to protect <br />building structures from harmful water ingress or the <br />effects of flooding. <br />Mechanical destruction <br />Mechanical destruction of cured reactive products <br />based on polyurethane or silane-modified polymer <br />does not lead to any decomposition products which are <br />harmful to the environment or health. <br />2.14 Re-use phase <br />According to present knowledge, no environmentally <br />harmful effects are generally anticipated in landfilling, <br />for example, as a result of de-construction and <br />recycling of building materials with adherent</p> <p>crosslinked products. If the crosslinked products can <br />be removed from construction products without large <br />effort, thermal recovery is a practical recycling variant <br />on account of their energy content. Minor adhesion is <br />not taken into consideration during disposal. It does <br />not interfere with the disposal/recycling of the <br />remaining components/building materials. <br />2.15 Disposal <br />Residual material which cannot be used or recycled <br />must be combined at a specified ratio and hardened. <br />Hardened product residue is not special waste. Nonhardened product residue is hazardous waste. Empty, <br />dried containers (free of drops and scraped clean) are <br />directed to the recycling process. Residue must be <br />directed to proper waste disposal taking into <br />consideration the local guidelines. The following waste <br />codes according to the European List of Waste <br />(2000/532/EC) can apply: <br />Hardened product residue: <br />European Waste Catalogue (EWC) code 080112 <br />(waste paint and varnish with the exception of that <br />mentioned in 08 01 11) <br />EWC code 080410 (waste adhesives and sealants <br />other than mentioned in 08 04 09) <br />2.16 Further information <br />More information is available on the manufacturer's <br />product or safety data sheets and on the <br />manufacturer's websites or on request. Valuable <br />technical information is also available on the <br />associations' websites.</p> <p>3. LCA: Calculation rules <br />3.1 <br />Declared Unit <br />This EPD refers to the declared unit of 1 kg of product <br />based on polyurethane or silane-modified polymer, <br />group 3; applied into the building with a density of 1.25 <br />- 1.8 g/cm³ in accordance with the IBU PCR part B for <br />reaction resin products. <br />The results of the Life Cycle Assessment provided in <br />this declaration have been selected from the product <br />with the highest environmental impact (worst-case <br />scenario). <br />Depending on the application, a corresponding <br />conversion factor such as the density to convert <br />volumetric use to mass must be taken into <br />consideration. <br />The Declaration type is according to EN 15804: Cradle <br />to gate with options, modules C1–C3, and module D <br />(A1–A3, C, D) and additional modules. <br />Declared unit <br />Name</p> <p>Declared unit <br />Gross density <br />Conversion factor to 1 kg</p> <p>Value</p> <p>Unit</p> <p>1 <br />1.25 - 1.8 <br />-</p> <p>kg <br />g/cm³ <br />-</p> <p>3.2 <br />System boundary <br />Modules A1, A2 and A3 are taken into consideration in <br />the LCA: <br />- A1 Production of preliminary products <br />- A2 Transport to the plant</p> <p>6</p> <p>- A3 Production incl. provision of energy, production of <br />packaging as well as auxiliaries and consumables and <br />waste treatment <br />- A4 Transport to site <br />- A5 Installation, product applied into the building <br />during A5 phase operations and packaging disposal. <br />This stage considers VOC emissions during the <br />installation phase. The declared product does not <br />contain substances in the formulation that directly emit <br />(as) VOC, but VOCs are generated by a chemical <br />reaction that are occurring during this phase. The end <br />of life for the packaging material considered is <br />described below: <br />-Incineration, for materials like plastic and wood. <br />-Landfill, for inert material like metals (where used). <br />-C1-C2-C3-D <br />The building deconstruction (demolition process) takes <br />place in the C1 module which considers energy <br />production and consumption in terms of diesel and all <br />the emissions connected with the fuel-burning process <br />to run the machines. After the demolition, the product <br />is transported to the end-of-life processing (C2 <br />module) where all the impacts related to the transport <br />processes are considered. For precautionary principle <br />and as a worst-case scenario, thermal treatment is the <br />only end-of-life scenario considered. This is modelled <br />by the incineration process (module C3) where the <br />product ends its life cycle. <br />Module D accounts for potential benefits that are <br />beyond the defined system boundaries. Credits are <br />generated during the incineration of wastes and related <br />electricity produced that are occurring in the A5 <br />module.</p> <p>Environmental Product Declaration FEICA/EFCC/IVK/DBC – Products based on polyurethane or silane-modified polymer, <br />group 3</p> <p>3.3 <br />Estimates and assumptions <br />For this EPD formulation and production data defined <br />and collected by FEICA were considered. Production <br />waste was assumed to be disposed of by incineration <br />without credits as a worst-case. <br />An average of steel and plastic containers, and <br />wooden pallets was considered in the LCA. <br />3.4 <br />Cut-off criteria <br />All raw materials submitted for the formulations and <br />production data were taken into consideration. <br />The manufacture of machinery, plant and other <br />infrastructure required for the production of the <br />products under review was not taken into consideration <br />in the LCA. <br />Transport of packaging materials is excluded. <br />3.5 <br />Background data <br />Data from the GaBi database SP40 (2020) was used <br />as background data. <br />3.6 <br />Data quality <br />Representative products were applied for this EPD and <br />the product in the group displaying the highest</p> <p>environmental impact was selected for calculating the <br />LCA results. The background data sets used are less <br />than 4 years old. <br />Production data and packaging are based on details <br />provided by the manufacturer. The formulation used for <br />evaluation refers to a specific product. <br />The data quality of the background data is considered <br />to be good. <br />3.7 <br />Period under review <br />Representative formulations are valid for 2021. <br />3.8 <br />Allocation <br />Mass allocation has been applied when primary data <br />have been used and implemented into the LCA model. <br />3.9 <br />Comparability <br />Basically, a comparison or an evaluation of EPD data <br />is only possible if all the data sets to be compared <br />were created according to EN 15804 and the building <br />context, respectively the product-specific <br />characteristics of performance, are taken into account. <br />The GaBi database SP40 (2020) was used.</p> <p>4. LCA: Scenarios and additional technical information <br />Characteristic product properties <br />Information on biogenic Carbon <br />The packaging material contains biogenic carbon <br />content which is presented below.</p> <p>waste <br />Incineration</p> <p>0.9</p> <p>kg</p> <p>Information on describing the biogenic Carbon <br />Content at factory gate <br />Name</p> <p>Biogenic Carbon Content in product <br />Biogenic Carbon Content in <br />accompanying packaging</p> <p>Value</p> <p>Unit</p> <p>0</p> <p>kg C</p> <p>0.016</p> <p>kg C</p> <p>Value</p> <p>Unit</p> <p>1000 <br />34 - 40 <br />27</p> <p>km <br />t <br />t</p> <p>Transport to the building site (A4) <br />Name</p> <p>Transport distance <br />Gross weight <br />Payload capacity <br />Assembly (A5) <br />Name</p> <p>Other resources for packaging <br />material <br />Material loss</p> <p>Value</p> <p>Unit</p> <p>0.1</p> <p>kg</p> <p>0.01</p> <p>kg</p> <p>Material loss regards the amount of product not used <br />during the application phase into the building. This <br />amount is 1% of the product, impacts related to the <br />production of this part are charged to the A5 module. <br />This percentage is considered as waste to disposal <br />and impacts of its end of life have been considered in <br />the LCA model and declared in A5.</p> <p>End of life (C1-C3) <br />Name</p> <p>Collected as mixed construction <br />7</p> <p>Value</p> <p>Unit</p> <p>0.9</p> <p>kg</p> <p>Environmental Product Declaration FEICA/EFCC/IVK/DBC – Products based on polyurethane or silane-modified polymer, <br />group 3</p> <p>5. LCA: Results <br />DESCRIPTION OF THE SYSTEM BOUNDARY (X = INCLUDED IN LCA; ND = MODULE OR INDICATOR NOT <br />DECLARED; MNR = MODULE NOT RELEVANT)</p> <p>B3</p> <p>B4</p> <p>X</p> <p>X</p> <p>X</p> <p>X</p> <p>X</p> <p>ND</p> <p>ND</p> <p>ReuseRecoveryRecyclingpotential</p> <p>Replacement</p> <p>B2</p> <p>Disposal</p> <p>Repair</p> <p>B1</p> <p>Waste processing</p> <p>Maintenance</p> <p>A5</p> <p>Transport</p> <p>Use</p> <p>A4</p> <p>De-construction <br />demolition</p> <p>Assembly</p> <p>A3</p> <p>Operational water <br />use</p> <p>Transport from the <br />gate to the site</p> <p>A2</p> <p>Operational energy <br />use</p> <p>Manufacturing</p> <p>A1</p> <p>END OF LIFE STAGE</p> <p>BENEFITS AND <br />LOADS <br />BEYOND THE <br />SYSTEM <br />BOUNDARIES</p> <p>Refurbishment</p> <p>Transport</p> <p>USE STAGE</p> <p>Raw material <br />supply</p> <p>PRODUCT STAGE</p> <p>CONSTRUCTI <br />ON PROCESS <br />STAGE</p> <p>B5</p> <p>B6</p> <p>B7</p> <p>C1</p> <p>C2</p> <p>C3</p> <p>C4</p> <p>D</p> <p>ND</p> <p>ND</p> <p>X</p> <p>X</p> <p>X</p> <p>ND</p> <p>X</p> <p>MNR MNR MNR</p> <p>RESULTS OF THE LCA - ENVIRONMENTAL IMPACT according to EN 15804+A2: 1 kg of product based on <br />polyurethane or silane modified polymer, group 3 <br />Core Indicator</p> <p>Unit</p> <p>A1-A3</p> <p>A4</p> <p>A5</p> <p>C1</p> <p>C2</p> <p>C3</p> <p>D</p> <p>GWP-total <br />[kg CO2-Eq.] <br />6.82E+0 <br />5.27E-2 <br />2.00E-1 <br />2.51E-4 <br />1.11E-2 <br />1.99E+0 <br />-8.60E-1 <br />GWP-fossil <br />[kg CO2-Eq.] <br />6.71E+0 <br />5.22E-2 <br />1.13E-1 <br />2.40E-4 <br />1.07E-2 <br />1.99E+0 <br />-8.57E-1 <br />GWP-biogenic <br />[kg CO2-Eq.] <br />9.63E-2 <br />1.52E-4 <br />8.75E-2 <br />1.11E-5 <br />4.88E-4 <br />7.94E-5 <br />-2.02E-3 <br />GWP-luluc <br />[kg CO2-Eq.] <br />9.92E-3 <br />4.22E-4 <br />1.03E-4 <br />5.76E-9 <br />2.51E-7 <br />1.87E-5 <br />-6.03E-4 <br />ODP <br />[kg CFC11-Eq.] <br />3.64E-9 <br />6.27E-18 <br />3.64E-11 <br />2.55E-20 <br />1.11E-18 <br />2.35E-16 <br />-8.99E-15 <br />AP <br />[mol H+-Eq.] <br />1.25E-2 <br />1.56E-4 <br />1.53E-4 <br />3.24E-6 <br />3.36E-5 <br />1.18E-3 <br />-1.20E-3 <br />EP-freshwater <br />[kg P-Eq.] <br />1.17E-5 <br />1.59E-7 <br />1.22E-7 <br />5.18E-11 <br />2.26E-9 <br />3.96E-8 <br />-1.11E-6 <br />EP-marine <br />[kg N-Eq.] <br />3.74E-3 <br />6.96E-5 <br />4.57E-5 <br />1.47E-6 <br />1.54E-5 <br />5.68E-4 <br />-3.11E-4 <br />EP-terrestrial <br />[mol N-Eq.] <br />3.98E-2 <br />7.80E-4 <br />5.16E-4 <br />1.61E-5 <br />1.70E-4 <br />6.54E-3 <br />-3.33E-3 <br />POCP <br />[kg NMVOC-Eq.] <br />1.30E-2 <br />1.38E-4 <br />1.07E-1 <br />4.42E-6 <br />3.05E-5 <br />1.46E-3 <br />-8.93E-4 <br />ADPE <br />[kg Sb-Eq.] <br />9.18E-6 <br />3.74E-9 <br />9.23E-8 <br />7.25E-12 <br />3.17E-10 <br />4.18E-9 <br />-1.41E-7 <br />ADPF <br />[MJ] <br />1.41E+2 <br />6.94E-1 <br />1.47E+0 <br />3.43E-3 <br />1.50E-1 <br />5.28E-1 <br />-1.45E+1 <br />[m³ world-Eq <br />WDP <br />1.00E+0 <br />4.66E-4 <br />2.36E-2 <br />4.74E-7 <br />2.07E-5 <br />1.96E-1 <br />-8.93E-2 <br />deprived] <br />GWP = Global warming potential; ODP = Depletion potential of the stratospheric ozone layer; AP = Acidification potential of land and water; EP = <br />Caption Eutrophication potential; POCP = Formation potential of tropospheric ozone photochemical oxidants; ADPE = Abiotic depletion potential for nonfossil resources; ADPF = Abiotic depletion potential for fossil resources; WDP = Water (user) deprivation potential</p> <p>RESULTS OF THE LCA - INDICATORS TO DESCRIBE RESOURCE USE according to EN 15804+A2: 1 kg of <br />product based on polyurethane or silane modified polymer, group 3 <br />Indicator</p> <p>Unit</p> <p>A1-A3</p> <p>A4</p> <p>A5</p> <p>C1</p> <p>C2</p> <p>C3</p> <p>D</p> <p>PERE <br />PERM <br />PERT <br />PENRE <br />PENRM <br />PENRT <br />SM <br />RSF <br />NRSF <br />FW</p> <p>[MJ] <br />8.25E+0 <br />3.90E-2 <br />6.81E-1 <br />1.08E-5 <br />4.72E-4 <br />7.41E-2 <br />-3.19E+0 <br />[MJ] <br />5.85E-1 <br />0.00E+0 <br />-5.85E-1 <br />0.00E+0 <br />0.00E+0 <br />0.00E+0 <br />0.00E+0 <br />[MJ] <br />8.84E+0 <br />3.90E-2 <br />9.57E-2 <br />1.08E-5 <br />4.72E-4 <br />7.41E-2 <br />-3.19E+0 <br />[MJ] <br />1.19E+2 <br />6.95E-1 <br />4.19E+0 <br />3.43E-3 <br />1.50E-1 <br />2.03E+1 <br />-1.45E+1 <br />[MJ] <br />2.24E+1 <br />0.00E+0 <br />-2.71E+0 <br />0.00E+0 <br />0.00E+0 <br />-1.97E+1 <br />0.00E+0 <br />[MJ] <br />1.41E+2 <br />6.95E-1 <br />1.47E+0 <br />3.43E-3 <br />1.50E-1 <br />5.29E-1 <br />-1.45E+1 <br />[kg] <br />0.00E+0 <br />0.00E+0 <br />0.00E+0 <br />0.00E+0 <br />0.00E+0 <br />0.00E+0 <br />0.00E+0 <br />[MJ] <br />0.00E+0 <br />0.00E+0 <br />0.00E+0 <br />0.00E+0 <br />0.00E+0 <br />0.00E+0 <br />0.00E+0 <br />[MJ] <br />0.00E+0 <br />0.00E+0 <br />0.00E+0 <br />0.00E+0 <br />0.00E+0 <br />0.00E+0 <br />0.00E+0 <br />[m³] <br />3.09E-2 <br />4.52E-5 <br />6.29E-4 <br />1.94E-8 <br />8.47E-7 <br />4.60E-3 <br />-3.70E-3 <br />PERE = Use of renewable primary energy excluding renewable primary energy resources used as raw materials; PERM = Use of <br />renewable primary energy resources used as raw materials; PERT = Total use of renewable primary energy resources; PENRE = Use of <br />non-renewable primary energy excluding non-renewable primary energy resources used as raw materials; PENRM = Use of nonCaption <br />renewable primary energy resources used as raw materials; PENRT = Total use of non-renewable primary energy resources; SM = Use <br />of secondary material; RSF = Use of renewable secondary fuels; NRSF = Use of non-renewable secondary fuels; FW = Use of net fresh <br />water</p> <p>RESULTS OF THE LCA – WASTE CATEGORIES AND OUTPUT FLOWS according to EN 15804+A2: <br />1 kg of product based on polyurethane or silane modified polymer, group 3 <br />Indicator</p> <p>Unit</p> <p>A1-A3</p> <p>A4</p> <p>A5</p> <p>C1</p> <p>C2</p> <p>C3</p> <p>D</p> <p>HWD <br />NHWD <br />RWD <br />CRU <br />MFR <br />MER <br />EEE <br />EET</p> <p>[kg] <br />3.02E-5 <br />3.23E-8 <br />3.02E-7 <br />3.33E-13 <br />1.45E-11 <br />3.01E-10 <br />-5.80E-9 <br />[kg] <br />2.79E-1 <br />1.06E-4 <br />4.86E-2 <br />3.51E-7 <br />1.53E-5 <br />9.97E-3 <br />-6.74E-3 <br />[kg] <br />2.56E-3 <br />8.60E-7 <br />2.75E-5 <br />3.68E-9 <br />1.61E-7 <br />2.13E-5 <br />-1.09E-3 <br />[kg] <br />0.00E+0 <br />0.00E+0 <br />0.00E+0 <br />0.00E+0 <br />0.00E+0 <br />0.00E+0 <br />0.00E+0 <br />[kg] <br />0.00E+0 <br />0.00E+0 <br />0.00E+0 <br />0.00E+0 <br />0.00E+0 <br />0.00E+0 <br />0.00E+0 <br />[kg] <br />0.00E+0 <br />0.00E+0 <br />0.00E+0 <br />0.00E+0 <br />0.00E+0 <br />0.00E+0 <br />0.00E+0 <br />[MJ] <br />0.00E+0 <br />0.00E+0 <br />2.12E-1 <br />0.00E+0 <br />0.00E+0 <br />0.00E+0 <br />0.00E+0 <br />[MJ] <br />0.00E+0 <br />0.00E+0 <br />3.86E-1 <br />0.00E+0 <br />0.00E+0 <br />0.00E+0 <br />0.00E+0 <br />HWD = Hazardous waste disposed; NHWD = Non-hazardous waste disposed; RWD = Radioactive waste disposed; CRU = Components <br />for re-use; MFR = Materials for recycling; MER = Materials for energy recovery; EEE = Exported electrical energy; EEE = Exported <br />Caption <br />thermal energy</p> <p>RESULTS OF THE LCA – additional impact categories according to EN 15804+A2-optional: <br />1 kg of product based on polyurethane or silane modified polymer, group 3</p> <p>8</p> <p>Environmental Product Declaration FEICA/EFCC/IVK/DBC – Products based on polyurethane or silane-modified polymer, <br />group 3</p> <p>Indicator</p> <p>Unit</p> <p>A1-A3</p> <p>A4</p> <p>A5</p> <p>C1</p> <p>C2</p> <p>C3</p> <p>D</p> <p>[Disease <br />PM <br />ND <br />ND <br />ND <br />ND <br />ND <br />ND <br />ND <br />Incidence] <br />[kBq U235IRP <br />ND <br />ND <br />ND <br />ND <br />ND <br />ND <br />ND <br />Eq.] <br />ETP-fw <br />[CTUe] <br />ND <br />ND <br />ND <br />ND <br />ND <br />ND <br />ND <br />HTP-c <br />[CTUh] <br />ND <br />ND <br />ND <br />ND <br />ND <br />ND <br />ND <br />HTP-nc <br />[CTUh] <br />ND <br />ND <br />ND <br />ND <br />ND <br />ND <br />ND <br />SQP <br />[-] <br />ND <br />ND <br />ND <br />ND <br />ND <br />ND <br />ND <br />PM = Potential incidence of disease due to PM emissions; IR = Potential Human exposure efficiency relative to U235; ETP-fw = Potential <br />Caption <br />comparative Toxic Unit for ecosystems; HTP-c = Potential comparative Toxic Unit for humans (cancerogenic); HTP-nc = Potential <br />comparative Toxic Unit for humans (not cancerogenic); SQP = Potential soil quality index</p> <p>Potential Human exposure efficiency relative to U235, Disclaimer 1 – This impact category deals mainly with the <br />eventual impact of low dose ionizing radiation on human health of the nuclear fuel cycle. It does not consider <br />effects due to possible nuclear accidents, occupational exposure or radioactive waste disposal in underground <br />facilities. Potential ionizing radiation from the soil, radon and (from) some construction materials is also not <br />measured by this indicator. <br />ADP minerals & metals, ADP fossil, WDP, ETF-fw, HTP-c, HTP-nc, SQP, Disclaimer 2 – The results of this <br />environmental impact indicator shall be used with care as the uncertainties on these results are high or as there is <br />limited experience with the indicator. <br />Additional environmental impact indicators (suggested by EN15804, table 4) are not declared in the EPD. The <br />results of this environmental impact indicator shall be used with care as the uncertainties on these results are high <br />and as there is limited experience with the indicator (see ILCD classification in EN 15804, table 5). For this <br />reason, results based on these indicators are not considered suitable for a decision-making process and are thus <br />not declared in the EPD.</p> <p>6. LCA: Interpretation <br />The majority of impacts are associated with the <br />production phase (A1-A3). The most significant <br />contribution to the production phase impacts is the <br />upstream production of raw materials as the main <br />driver. Another substantial contributor in the production <br />phase, in the category of Abiotic depletion potential for <br />non fossil resources (ADPminerals& metals), is the <br />steel sheet used as a packaging material. Emissions <br />associated with the manufacturing of products also <br />have some influence on the Formation potential of <br />tropospheric ozone (POCP) in the production phase. In <br />all EPDs, CO2 is the most important contributor to <br />Global Warming Potential (GWP). For the Acidification <br />Potential (AP), NOx and SO2 contribute the largest <br />share. In some cases, HCl in water also impacts AP <br />due to the use of TiO2 as a pigment. <br />The majority of life cycle energy consumption takes <br />place during the production phase (A1-A3). Significant <br />contributions to Primary Energy Demand – Nonrenewable (PENRT) come from the energy resources <br />used in the production of raw materials. The largest <br />contributor to Primary Energy Demand – Renewable</p> <p>(PERT) impacts comes from the consumption of <br />renewable energy resources required for the <br />generation and supply of electricity. It should be noted <br />that Primary Energy Demand – Renewable (PERT) <br />generally represents a small percentage of the <br />production phase primary energy demand with the bulk <br />of the demand coming from non-renewable energy <br />resources. <br />Transportation to the construction site (A4) and the <br />installation process (A5) make a low contribution to all <br />impacts. <br />The installation phase influences mainly the <br />Photochemical ozone formation indicator, due to the <br />emission of VOC during the operations. These <br />emissions are not only directly related to the preproducts in the resins, but they are related to the <br />reaction products between pre-products and air <br />components (water and oxygen). <br />The end-of-life phases influence climate change <br />indicators, due to the incineration processes occurring <br />in the C3 module, the process used for modelling the <br />thermal tretment process of the resin.</p> <p>7. Requisite evidence <br />VOC <br />Special tests and evidence have not been carried out <br />or provided within the framework of drawing up this <br />Model EPD. Some member states require special <br />documentation on VOC emissions into indoor air for <br />specific areas of application. This documentation, as <br />well as documentation for voluntary VOC labelling, has <br />to be provided separately and is specific for product in <br />question. <br />Evidence pertaining to VOC emissions shall show <br />either an attestation of compliance with, <br />or documentation of test data that are required in <br />9</p> <p>any of the existing regulations or in any of the existing <br />voluntary labelling programs for low-emitting products, <br />as far as these <br />(1) include limits for the parameters TVOC, TSVOC, <br />carcinogens, formaldehyde, acetaldehyde, LCI limits <br />for individual substances (including but not limited to <br />the European list of harmonized LCIs), and the R <br />value; <br />(2) base their test methods on EN 16516; <br />(3) perform testing and apply the limits after 28 days <br />of storage in a ventilated test chamber, under the <br />conditions specified in EN 16516; some regulations</p> <p>Environmental Product Declaration FEICA/EFCC/IVK/DBC – Products based on polyurethane or silane-modified polymer, <br />group 3</p> <p>and programs also have limits after 3 days, on top of <br />the 28 days limits; <br />(4) express the test results as air concentrations in <br />the European Reference Room, as specified in EN <br />16516. <br />Examples of such regulations are the Belgian Royal <br />Decree C-2014/24239, or the German AgBB/ ABG. <br />Examples of such voluntary labelling programs are <br />EMICODE, Blue Angel or Indoor Air Comfort. <br />Relevant test results shall be produced either by an <br />ISO 17025 accredited commercial test lab or by a <br />qualified internal test lab of the manufacturer. <br />Examples for the applied limits after 28 days of storage <br />in a ventilated test chamber are: <br />TVOC: 1000 µg/m³</p> <p>TSVOC: 100 µg/m³ <br />Each carcinogen: 1 µg/m³ <br />Formaldehyde: 100 µg/m³ <br />LCI: different per substance involved <br />R value: 1 (meaning that, in total, 100 % of the <br />combined LCI values must not be exceeded). <br />Informative Annexes (2 tables): <br />Table 1 shown below is an overview of the most <br />relevant regulations and specifications as of October <br />2021, as regards requirements after 3 days of storage <br />in a ventilated test chamber. <br />Table 2 provides an overview of the most relevant <br />regulations and specifications as of October 2021, as <br />regards requirements after 28 days of storage in a <br />ventilated test chamber. Some details may be missing <br />in the table due to lack of space. Values given <br />represent maximum values/limits.</p> <p>8. References <br />ETAG 033 <br />Liquid applied bridge deck waterproofing kits <br />10</p> <p>ISO 48-4</p> <p>Environmental Product Declaration FEICA/EFCC/IVK/DBC – Products based on polyurethane or silane-modified polymer, <br />group 3</p> <p>ISO 48-4:2018, Rubber, vulcanized or thermoplastic Determination of hardness- Part 4: Indentation <br />hardness by durometer method (Shore hardness)</p> <p>EN ISO 7783:2019-02, Paints and varnishes Determination of water-vapour transmission properties <br />- Cup method</p> <p>EN ISO 717-1 <br />EN ISO 717-1:2020 Acoustics - Rating of sound <br />insulation in buildings and of building elements Part 1: Airborne sound insulation</p> <p>EN 12004 <br />EN12004:2012, Adhesives for ceramic tiles</p> <p>EN 1062-3 <br />EN 1062-3:2008-04, Paints and varnishes - Coating <br />materials and coating systems for exterior masonry <br />and concrete - Part 3: Determination of liquid water <br />permeability <br />EN 1062-6 <br />EN 1062-6:2002-10, Paints and varnishes - Coating <br />materials and coating systems for exterior masonry <br />and concrete - Part 6: Determination of carbon dioxide <br />permeability <br />EN 1279-4 <br />EN 1279-4:2002 Glass in building - Insulating glass <br />units - Part 4: Methods of test for the physical <br />attributes of edge seals <br />EN 1504-2 <br />EN 1504-2:2004-12, Products and systems for the <br />protection and repair of concrete structures Definitions, requirements, quality control and <br />evaluation of conformity - Part 2: Surface protection <br />systems for concrete <br />EN 1504-4 <br />EN 1504-4:2004-11, Products and systems for the <br />protection and repair of concrete structures Definitions, requirements, quality control and <br />evaluation of conformity- Part 4: Structural bonding <br />EN 1504-5 <br />EN 1504-5:2004-12, Products and systems for the <br />protection and repair of concrete structures Definitions, requirements, quality control and <br />evaluation of conformity - Part 5: Concrete injection <br />EN 1542 <br />EN 1542:1999-07, Products and systems for the <br />protection and repair of concrete structures - Test <br />methods - Measurement of bond strength by pull-off <br />EN 1771 <br />EN 1771:2004-11, Products and systems for the <br />protection and repair of concrete structures - Test <br />methods - Determination of injectability and splitting <br />test <br />ISO 2811-1 <br />ISO 2811-1:2016, Paints and varnishes Determination of density - Part 1: Pycnometer method <br />EN ISO 3219 <br />EN ISO 3219:1994-10, Plastics - Polymers/resins in <br />the liquid state or as emulsions or dispersions Determination of viscosity using a rotational viscometer <br />with defined shear rate <br />ISO 3219-2 <br />ISO 3219-2:2021, Rheology - Part 2: General <br />principles of rotational and oscillatory rheometry <br />EN ISO 7783 <br />11</p> <p>EN 12004-1 <br />EN 12004-1:2017, Adhesives for ceramic tiles – Part 1: <br />Requirements, assessment and verification of <br />constancy of performance, classification and marking <br />EN 12004-2 <br />EN 12004-2:2017, Adhesives for ceramic tiles - Part 2: <br />Test methods <br />EN 13501-1 <br />EN 13501-1:2018, Fire classification of construction <br />products and building elements - Part 1: Classification <br />using data from reaction to fire tests <br />EN 13813 <br />EN 13813:2002-10, Screed material and floor screeds <br />- Screed materials - Properties and requirements <br />EN 13892-8 <br />EN 13892:2003-02, Methods of test for screed <br />materials - Part 8: Determination of bond strength <br />ISO 14025 <br />DIN EN ISO 14025:2011-10, Environmental labels and <br />declarations — Type III environmental declarations — <br />Principles and procedures <br />EN 14891 <br />EN 14891:2012-04, Liquid applied water impermeable <br />products for use beneath ceramic tiling - Definitions, <br />specifications and test methods <br />EN 15804 <br />EN 15804:2019+A2, Sustainability of construction <br />works — Environmental Product Declarations — Core <br />rules for the product category of construction products <br />EN 16516 <br />EN 16516:2017 <br />Construction products - Assessment of release of <br />dangerous substances - Determination of emissions <br />into indoor air <br />EN ISO 17025 <br />EN ISO 17025:2018-03 <br />General requirements for the competence of testing <br />and calibration laboratories <br />EN ISO 17178 <br />EN ISO 17178:2020-06, Adhesives - Adhesives for <br />bonding parquet to subfloor - Test methods and <br />minimum requirements <br />EN 17333-2 <br />EN 17333-2:2020+AC:2020, Characterisation of one <br />component foam - Part 2: Expansion characteristics <br />EN 17333-3 <br />EN 17333-3:2020, Characterisation of one component <br />foam - Part 3: Application <br />EN 17333-4 <br />EN 17333-4:2020, Characterisation of one component <br />foam - Part 4: Mechanical strength</p> <p>Environmental Product Declaration FEICA/EFCC/IVK/DBC – Products based on polyurethane or silane-modified polymer, <br />group 3</p> <p>EN 17333-5 <br />EN 17333-5:2020, Characterisation of one component <br />foam - Part 5: Insulation <br />EN ISO 22636 <br />EN ISO 22636:2020, Adhesives - Adhesives for floor <br />coverings - Requirements for mechanical and electrical <br />performance <br />EAD 030350-00-0402 <br />EAD 030350-00-0402:2018-08, Liquid Applied Roof <br />Waterproofing Kits <br />EAD 030352-00-0503 <br />EAD 030352-00-0503:2019-01, Liquid applied <br />watertight covering kits for wet room floors and/or walls</p> <p>data sets http://documentation.gabi-software.com/, <br />2020 <br />German AgBB <br />Committee for Health-related Evaluation of Building <br />Products: health-related evaluation of emissions of <br />volatile organic compounds (VOC and SVOC) from <br />building products; status: June 2012 <br />www.umweltbundesamt.de/produkte/bauprodukte/agb <br />b.htm <br />IBU 2021 <br />Institut Bauen und Umwelt e.V.: General Instructions <br />for the EPD programme of Institut Bauen und Umwelt <br />e.V. EPD programme. Version 2.0. Berlin: Institut <br />Bauen und Umwelt e.V., 2021 <br />www.ibu-epd.com</p> <p>2000/532/EC <br />Commission decision dated 3 May 2000 replacing <br />decision 94/3/EC on a waste directory in accordance <br />with Article 1 a) of Council Directive 75/442/EEC on <br />waste and Council decision 94/904/EC on a directory <br />of hazardous waste in terms of Article 1, paragraph 4 <br />of Directive 91/689/EEC on hazardous waste</p> <p>ift-Guideline VE-08/4 <br />ift-Guideline VE-08/4:2017, Beurteilungsgrundlage für <br />geklebte Verglasungssysteme</p> <p>Belgian Royal Decree C-2014/24239 <br />Belgisch Staatsblad 8 MEI 2014, p. 60603. — <br />Koninklijk besluit tot vaststelling van de <br />drempelniveaus voor de emissies naar het <br />binnenmilieu van bouwproducten voor bepaalde <br />geoogde gebruiken</p> <p>PCR Part A <br />Product Category Rules for Building-Related Products <br />and Services, Part A: Calculation Rules for the Life <br />Cycle Assessment and Requirements on the Project <br />report, Version 1.1, Institut Bauen und Umwelt e.V., <br />2021-01</p> <p>Blue Angel <br />Environmental label organised by the federal <br />government of Germany www.blauer-engel.de</p> <p>PCR Part B <br />Product Category Rules for Construction Products, <br />Part B: Reaction resin products, Institut Bauen und <br />Umwelt e.V., 2019-01</p> <p>CPR <br />CPR Regulation (EU) No 305/2011 of the European <br />Parliament and of the Council of 9 March 2011 laying <br />down harmonised conditions for the marketing of <br />construction products and repealing Council Directive <br />89/106/EEC <br />Decopaint Directive <br />Directive 2004/42/CE of the European Parliament and <br />the council of 21 April 2004 on the limitation of <br />emissions of volatile organic compounds due to the <br />use of organic solvents in certain paints and varnishes <br />and vehicle refinishing products and amending <br />Directive 1999/13/EC <br />EMICODE <br />EMICODE, GEV – Gemeinschaft <br />Emissionskontrollierte Verlegewerkstoffe, Klebstoffe <br />und Bauprodukte e. V. (pub.).www.emicode.de</p> <p>Indoor Air Comfort <br />Product certification by Eurofins, Hamburg, Germany <br />www.eurofins.com</p> <p>RAL-GZ 716 <br />RAL-GZ 716:2019-04 part 2, KunststoffFensterprofilsysteme - Gütesicherung <br />REACH <br />Directive (EG) No. 1907/2006 of the European <br />Parliament and of the Council dated 18 December <br />2006 on the registration, evaluation, approval and <br />restriction of chemical substances (REACH), for <br />establishing a European Agency for chemical <br />substances, for amending Directive 1999/45/EC and <br />for annulment of Directive (EEC) No. 793/93 of the <br />Council, Directive (EC) No. 1488/94 of the <br />Commission, Guideline 76/769/EEC of the Council and <br />Guidelines 91/155/EEC, 93/67/EEC, 93/105/EC and <br />2000/21/EC of the Commission.</p> <p>GaBi 10 software & documentation <br />Data base for Life Cycle Engineering LBP, University <br />of Stuttgart and Sphera, documentation of GaBi 10</p> <p>12</p> <p>Environmental Product Declaration FEICA/EFCC/IVK/DBC – Products based on polyurethane or silane-modified polymer, <br />group 3</p> <p>Publisher <br />Institut Bauen und Umwelt e.V. <br />Hegelplatz 1 <br />10117 Berlin <br />Germany</p> <p>Tel <br />Fax <br />Mail <br />Web</p> <p>+49 (0)30 3087748- 0 <br />+49 (0)30 3087748- 29 <br />info@ibu-epd.com <br />www.ibu-epd.com</p> <p>Programme holder <br />Institut Bauen und Umwelt e.V. <br />Hegelplatz 1 <br />10117 Berlin <br />Germany</p> <p>Tel <br />Fax <br />Mail <br />Web</p> <p>+49 (0)30 - 3087748- 0 <br />+49 (0)30 – 3087748 - 29 <br />info@ibu-epd.com <br />www.ibu-epd.com</p> <p>Tel <br />Fax <br />Mail <br />Web</p> <p>+49 711 341817-0 <br />+49 711 341817-25 <br />info@sphera.com <br />www.sphera.com</p> <p>Owner of the Declaration <br />Deutsche Bauchemie e.V. <br />Mainzer Landstr. 55 <br />60329 Frankfurt <br />Germany</p> <p>Tel <br />Fax <br />Mail <br />Web</p> <p>+49 (0)69 2556-1318 <br />+49 (0)69 2556-1319 <br />info@deutsche-bauchemie.de <br />www.deutsche-bauchemie.de</p> <p>Industrieverband Klebstoffe e.V <br />Völklinger Straße 4 <br />40219 Düsseldorf <br />Germany</p> <p>Tel <br />Fax <br />Mail <br />Web</p> <p>+49 (0)211 67931-10 <br />+49 (0)211 67931-33 <br />info@klebstoffe.com <br />www.klebstoffe.com</p> <p>FEICA - Association of the <br />European Adhesive and Sealant <br />Industry <br />Avenue E. van Nieuwenhuyse 2 <br />B-1160 Brussels <br />Belgium</p> <p>Tel <br />Fax <br />Mail <br />Web</p> <p>+32 (0)267 673 20 <br />+32 (0)267 673 99 <br />info@feica.eu <br />www.feica.eu</p> <p>Tel <br />Fax <br />Mail <br />Web</p> <p>+32289720-39 <br />+32289720-37 <br />info@efcc.be <br />www.efcc.eu</p> <p>Author of the Life Cycle <br />Assessment <br />Sphera Solutions GmbH <br />Hauptstraße 111- 113 <br />70771 Leinfelden-Echterdingen <br />Germany</p> <p>EFCC - European Federation for <br />Construction Chemicals <br />Boulevard du Triomphe 172 <br />1160 Brussels <br />Belgium</p>
