SB_BETOCRETE_Planning-folder_EN_2826_lr.pdf
119 Pages
7.28 MB
Download
<h1>SB_BETOCRETE_Planning-folder_EN_2826_lr.pdf</h1> <p>The Waterproofing <br />System for concrete <br />construction – <br />Crystalline waterproofing <br />system</p> <p>SCHOMBURG <br />Problems Solved.</p> <p>Welcome to <br />SCHOMBURG! <br />Whatever you’re planning, our <br />premium package supports you <br />at the highest level at all times. <br />That’s what we stand for.</p> <p>Waterproofing system <br />Concrete construction – innovative <br />crystalline concrete admixtures <br />and system accessories. <br />betocrete.com</p> <p>SCHOMBURG is more <br />than expertise. <br />Benefit from our <br />service extras.</p> <p>All information <br />about BETOCRETE at <br />www.betocrete.com</p> <p>With us, you stay at the top. <br />We are happy to update this folder <br />on a regular basis. <br />Please contact us! <br />schomburg.com</p> <p>1 SYSTEM OVERVIEW <br />2 CONCRETE WATERPROOFING – <br />BETOCRETE-C <br />3 CONSTRUCTION JOINTS <br />4 MOVEMENT JOINTS <br />5 FRESH CONCRETE WATERPROOFING <br />MEMBRANE <br />6 CRYSTALLINE WATERPROOFING <br />SOLUTIONS FOR RETROFITTING <br />AND REPAIRS <br />7 PLANNING DOCUMENTS</p> <p>1 SYSTEM OVERVIEW</p> <p>1 SYSTEM OVERVIEW <br /> <br />Brochure <br />1.1</p> <p>Concrete construction waterproofing system <br />Crystalline sealing cleverly thought-out</p> <p>SCHOMBURG <br />Problems Solved.</p> <p>SCHOMBURG <br />Problems Solved.</p> <p>CONCRETE CONSTRUCTION <br />WATERPROOFING SYSTEM <br />System-based crystalline <br />waterproofing.</p> <p>schomburg.com</p> <p>Problems solved. For your reinforced concrete <br />building projects <br />SCHOMBURG offers its customers a comprehensive range of sealing solutions. From cementitious <br />mineral and bituminous waterproofing to integral crystalline waterproofing of concrete building <br />components and membrane waterproofing, for example with fresh concrete composite systems. <br />In terms of cost-effectiveness and the improvement in building component properties, the integral <br />concrete waterproofing with the crystalline concrete admixture BETOCRETE certainly stands <br />out. When using BETOCRETE products, the cracks in a “watertight” concrete can grow closed <br />due to the increased and accelerated crack healing ability on contact with water. In addition, <br />the concrete becomes “more resistant” to attacks from the environment and the service life <br />of the concrete building component is noticeably extended. <br />This brochure explains the background and effects. For more information, visit www.betocrete.com.</p> <p>Concrete construction waterproofing system <br />Systematic crystalline waterproofing</p> <p>Contents <br /> 4 Capillary action of concrete <br /> Cracks in concrete <br /> Generation of cracks <br /> Crack types <br /> 6 Concrete degradation and concrete protection <br /> 7 How BETOCRETE works <br /> 8 Effects of BETOCRETE <br /> 9 Areas of application <br /> 10 Economical waterproofing of buildings <br />with BETOCRETE concrete <br /> 11 Guide for concrete formulations <br /> 12 Extension of lifetime of concrete building components <br />with BETOCRETE <br /> 13 Range <br /> Liquid concrete admixture with crystalline effect <br /> Concrete admixture in powder form with a crystalline effect <br /> 14 Dosing <br />15 Supplementary products <br />for concrete sealing in new buildings <br />16 BETOCRETE renovation system <br /> 18 Participants in the implementation <br />of crystalline waterproofing products <br /> 19 Reference projects</p> <p>schomburg.com</p> <p>3</p> <p>Properties of concrete building components <br />Capillary action of concrete <br />Concrete is a building material with capillary action. If the concrete building <br />component is exposed to water, the water is partially absorbed. The extent <br />depends on the water pressure on the one hand and the concrete recipe on <br />the other.</p> <p>outwards <br />(waterside)</p> <p>reinforcing steel</p> <p>reinforcing steel</p> <p>pressurised water zone</p> <p>watertight concrete</p> <p>inwards <br />(airside)</p> <p>moisture <br />release</p> <p>capillary <br />zone</p> <p>core region</p> <p>diffusion <br />region</p> <p>Graphic showing principle of capillary water absorption of a watertight concrete building component.</p> <p>4</p> <p>schomburg.com</p> <p>Cracks in concrete</p> <p>1</p> <p>Cracks can affect the load-bearing capacity, serviceability and durability of concrete building <br />components. Cracks cannot generally be avoided, but they are not fundamentally detrimental either. <br />The width of the cracks only has to be limited to a harmless level or the crack has to be closed as <br />planned. <br />Cracks and crack widths are planned during construction and dimensioning in accordance <br />with DIN EN 1990 (EUROCODE 2).</p> <p>Generation of cracks</p> <p>1</p> <p>Cracks in the fresh concrete are caused by the rapid reduction in volume of the concrete layer near <br />the surface as a result of dehydration. This drying out is favoured by low humidity, wind, solar radiation <br />and unfavourable temperatures. <br />Cracks in ‘green’ and hardened concrete occur when the tensile stresses caused by internal stresses, <br />constraint and external loads reach the tensile strength of the concrete up to that point in time or <br />the strains caused by this exceed the current tensile strains at fracture.</p> <p>Crack types <br />A distinction is made between near-surface cracks and separating cracks. Cracks close to the surface <br />reduce the coverage of the reinforcing steel by the concrete. Separating cracks go through the building <br />component.</p> <p>Section Section</p> <p>Top View <br />Top View</p> <p>Surface cracks</p> <p>1</p> <p>Section Section</p> <p>Top View <br />Top View</p> <p>Tensile cracks</p> <p>CEMENT data sheet B18 2.2020</p> <p>schomburg.com</p> <p>5</p> <p>Concrete degradation <br />In reinforced concrete, the concrete absorbs the pressure and the reinforcing steel absorbs the tensile <br />forces. The reinforcing steel is protected by the concrete cover and by the alkalinity of the concrete. <br />Oxygen in the presence of water oxidises the reinforcing steel. As long as the alkalinity of the concrete <br />is > pH 10, the steel is protected from the rusting process. Chloride ions (XD, XS) accelerate <br />the oxidation process. Oxidation of the reinforcing steel leads to an increase in volume, cracking and <br />the concrete cover flaking off. <br />CO2 in the presence of water leads to a decrease in the pH of the concrete through carbonation (XC). <br />If the pH falls below 10, oxidation processes can progress. The presence of chloride ions accelerates <br />this depassivation process. <br />CO</p> <p>-</p> <p>CI</p> <p>FE(OH)2</p> <p>2</p> <p>H2O</p> <p>2(OH)-</p> <p>Fe2+</p> <p>H₂O+1/2 O₂</p> <p>2e-</p> <p>Depassivation and oxidation lead to corrosion <br />of the steel reinforcement</p> <p>Concrete cover reduced by freeze-thaw <br />weathering in conjunction with de-icing agents</p> <p>Mechanical (XM) and chemical loading (XA) can attack the concrete cover. Likewise, <br />freeze-thaw cycles (XF) have an effect in connection with de-icing agents.</p> <p>Concrete protection <br />Reinforced concrete can be protected and its service life extended as follows: <br />Keep pH high = A high pH protects the reinforcement steel <br />Reduce water ingress = Lower water ingress means lower input of concrete-damaging <br />substances (CO2, O2, chloride etc.) <br />R educe chloride ion migration = processes of oxidation and depassivation take <br />place more slowly <br />Protect concrete cover = The higher the concrete cover, the better the reinforcing steel <br />is protected against oxidation</p> <p>Exposure classes after EN 206-1 <br />The right choice of exposure classes is decisive for many <br />technical specifications. In the scope of the European standards <br />the descriptions can be found under EN 206-1.</p> <p>6</p> <p>schomburg.com</p> <p>How BETOCRETE works <br />BETOCRETE crystalline waterproofing admixture is added to the fresh concrete and hardens with it. <br />When it comes into contact with water, the active substance dissolves, reacts with the calcium hydroxide <br />in the concrete and with CO2. Crystals are formed. <br />CO2</p> <p>H2O</p> <p>WS <br />CA(OH)2</p> <p>H2O <br />CO2</p> <p>=</p> <p>CaCO3 + CO2 <br />+ H2O + WS</p> <p>How BETOCRETE crack healing works <br />BETOCRETE in uncracked concrete <br />The capillary structure of the reinforced concrete fills with nanocrystals, the concrete becomes more compact.</p> <p>Macro view of nanocrystals</p> <p>Nanocrystals in the capillary pore structure</p> <p>BETOCRETE in cracked concrete <br />BETOCRETE has the ability to close separating and near-surface cracks watertight through <br />crystallisation.</p> <p>BETOCRETE crystal formation <br />• leads to accelerated and increased crack healing, <br />cracks up to 0.4 mm can be closed <br />• results in a denser/more compact concrete structure</p> <p>schomburg.com</p> <p>7</p> <p>Effects of BETOCRETE</p> <p>Effects of BETOCRETE on non-cracked concrete <br />The more compact / dense concrete structure resulting from crystal growth causes the capillary zone <br />to shift outwards (schematic diagram A). Ground moisture and pressurised water are conducted to a <br />lesser extent into the interior of the component and are therefore less close to the reinforcement. <br />Substances that damage the concrete are kept away from the reinforcement with the water. <br />inwards <br />(airside)</p> <p>reinforcing steel <br />watertight concrete</p> <p>pressurised water zone</p> <p>outwards <br />(waterside)</p> <p>moisture <br />release</p> <p>reduction <br />capillary zone <br />capillary zone <br />before <br />capillary <br />zone</p> <p>core region</p> <p>schematic diagram A</p> <p>diffusion <br />region</p> <p>Effects of BETOCRETE on cracked concrete <br />Cracks close to the surface bring water and substances damaging to the concrete closer to <br />the reinforcement, and separating cracks bring water into the interior of the building (schematic diagram B). <br />inwards <br />(airside)</p> <p>reinforcing steel <br />watertight concrete</p> <p>pressurised water zone</p> <p>outwards <br />(waterside)</p> <p>moisture <br />release</p> <p>capillary <br />zone</p> <p>core region</p> <p>diffusion <br />region</p> <p>schematic diagram B</p> <p>Crack closure keeps the damaging substances away from the reinforcement and stops water entering the <br />building (schematic diagram A). Sealing grouting need to take place less frequently.</p> <p>BETOCRETE crystal structure/crystal formation <br />• reduces water ingress via the capillary zone and cracks <br />•p <br /> rotects the reinforcing steel by closing cracks near <br />the surface <br />• reduces the need for sealing injections by closing separating <br />cracks <br />•a <br /> lso induces crack healing if water is present later</p> <p>8</p> <p>schomburg.com</p> <p>Areas of application</p> <p>Our BETOCRETE products are used today as economical waterproofing in commercial/manufacturing/ <br />car park construction or in infrastructure construction as a measure to extend the service life of components.</p> <p>Collection and retaining <br />basins</p> <p>Parking garages and <br />parking decks</p> <p>Swimming pools embedded <br />in ground</p> <p>Cooling towers of power <br />stations</p> <p>Foundations</p> <p>Tunnels and concrete pipes</p> <p>Tanks and containers</p> <p>Drain and manhole access <br />points</p> <p>Further information <br />Our BETOCRETE video gives a brief <br />introduction to the mode of action and <br />the advantages of the BETOCRETE crystalline <br />waterproofing admixture. <br />On our microsite www.betocrete.com you <br />will find comprehensive information <br />on properties, areas of application and also <br />specific detailed solutions on the subject <br />of BETOCRETE and system accessories.</p> <p>schomburg.com</p> <p>9</p> <p>Economical waterproofing of buildings with <br />BETOCRETE concrete <br />Our products BETOCRETE-CP360-WP and BETOCRETE-CL210-WP have a sealant after DIN EN 934-2 <br />integrated into the formulation. This results in an immediate decrease in capillary water absorption by > 50%. <br />The concrete becomes more waterproof. <br />In addition, when exposed to water, crystals form in the capillary pores and cracks due to increased and <br />accelerated crack healing. The negative effect of water ingress, even in unavoidable cracks, does not occur.</p> <p>2 in 1 / BETOCRETE with integrated <br />concrete admixtures after DIN EN 934-2 (CE) <br />•C <br /> oncrete after DIN EN 206, which is ordered according <br />to properties, may contain concrete admixtures according to <br />DIN EN 934-2 and the concrete manufacturer assumes <br />the guarantee for the concrete. In the case of admixtures without <br />a CE marks after DIN EN 934-2, a concrete composition would <br />result and the responsibility would pass to the customer. <br />• T he sealants integrated in the BETOCRETE provide immediate <br />hydrophobicity in the hardened concrete. With the water contact, <br />crystals then form in pores and cracks (hydrophilic) as an <br />additional effect. <br />• T he plasticizer integrated in the BETOCRETE-CL170-P reduces <br />the water/cement value and contributes to a smoother concrete <br />consistency.</p> <p>Cost effectiveness of BETOCRETE waterproofing system <br />• T he waterproofing with BETOCRETE becomes an integral part <br />of the concrete construction component as early as during <br />the production of the concrete in the concrete plant. <br />•S <br /> ubsequent liquid waterproofing can be omitted and does <br />not have to be organised, carried out and monitored on site. <br />•C <br /> rack injections for non-dynamic separating cracks up to 0.4 mm <br />can often be omitted due to the crack-healing ability of <br />BETOCRETE concrete. <br />•B <br /> ETOCRETE waterproofing works for a component's lifetime. <br />Renovation cycles can be eliminated.</p> <p>10 schomburg.com</p> <p>Guide to BETOCRETE concrete formulations</p> <p>Requirements <br />for the concrete* <br />Cement content</p> <p>Min. 270 kg/m3 CEM I; 290 kg/m3 CEM II; 380 kg/m3 CEM III/A</p> <p>Fly ash</p> <p>Max. 80 kg/m³</p> <p>Granulated slag</p> <p>Max. 100 kg/m³</p> <p>w/c ratio</p> <p>< 0.55</p> <p>Grain size</p> <p>16 mm, in exceptional cases 32 mm</p> <p>Construction <br />component thickness</p> <p>The construction component thickness should not be less than 15 cm</p> <p>* Depending on the necessary exposure class and the proportion of fly ash and/or granulated slag. <br />Further information can be found in the current technical data sheet.</p> <p>BETOCRETE® <br />CP</p> <p>BETOCRETE® <br />CL</p> <p>Dosing*: w/c ratio <br />< 0.4</p> <p>0.75 % relative to CEM</p> <p>1.75 % relative to CEM</p> <p>> 0.4–0.5</p> <p>0.80 % relative to CEM</p> <p>1.85 % relative to CEM</p> <p>> 0.5–0.55</p> <p>0.95 % relative to CEM</p> <p>2.00 % relative to CEM</p> <p>In concrete factory</p> <p>BETOCRETE-CP must be dosed onto <br />the aggregates and mixed for at least <br />30 seconds before adding the water <br />and cement. Then mix for a minimum <br />of 45 seconds until usable.</p> <p>Add BETOCRETE-CL with the mixing water <br />or the finished concrete mixture.</p> <p>On the building site</p> <p>BETOCRETE-CP is added on site (mixer truck) <br />using water-soluble sacks. The mixing time <br />should be 1 minute/m³ of drum content, <br />but a minimum of 5 minutes.</p> <p>Pour BETOCRETE-CL directly into the mixing drum <br />and then add 1 minute/m³ of drum content, but <br />for a minimum of 5 minutes. BETOCRETE Deduct <br />the amount from the mixing water.</p> <p>Application</p> <p>* The dosage depends on the cement content used and the w/c ratio of the corresponding concrete recipe. <br />The tabular overview serves as a guide. Pre-testing is always necessary!</p> <p>schomburg.com 11</p> <p>Extension of lifetime of concrete building components <br />with BETOCRETE <br />BETOCRETE extends the service life of the concrete component through <br />reduced water ingress and thus reduced <br />entry of substances that damage the <br />concrete <br />• By crack healing <br />• Due to reduced water ingress in capillary <br />and pressurised water situations</p> <p>Reduction of concrete-damaging <br />processes <br />• Reduction of chloride ion migration <br />• Reduction of carbonation rate</p> <p>Protection of the concrete cover <br />• Improvement of frost-thaw <br />weathering values <br />• R eduction of the attack surface <br />for mechanical abrasion through <br />crack healing</p> <p>Less carbonation, reduced <br />rate of concrete ageing</p> <p>Less water, less <br />aggressive substances, <br />longer component life</p> <p>Test proofs: Reduced water ingress through <br />pressurised water and capillary water <br />absorption <br />The German Federal Institute for Hydraulic Engineering <br />(“BAW”) has developed a method to determine <br />the service life of concrete structures based on chloride <br />ion migration. Chlorides lead to increased carbonation <br />and increased oxidation of reinforcing steel. The higher <br />the chloride ion migration for a given concrete cover, <br />the faster the concrete component ages.</p> <p>Test proofs: Reduced carbonation and <br />chloride ion migration</p> <p>Sample calculation <br />Specific lifetime extension for a concrete component according <br />to the BAW method: <br />Migration coefficient</p> <p>Using a test report, SCHOMBURG can show an <br />example of a concrete recipe that the BETOCRETE <br />concrete leads to a 2.5-fold increase in the service <br />life compared to the reference concrete.</p> <p>Period until depassivation of the reinforcement [a]</p> <p>12 schomburg.com</p> <p>Range</p> <p>Liquid concrete admixture with crystalline effect <br />BETOCRETE-CL210-WP</p> <p>Concrete admixture with crystalline effect and sealant <br />• possible crack healing for continuous cracks up to 0.4 mm <br />and for tapering cracks up to 0.5 mm <br />• minimisation of servicing and maintenance costs <br />• integrated sealant (DM) after DIN EN 934-2 <br />• economical dosing in the concrete plant via dosing pump</p> <p>BETOCRETE-CL170-P</p> <p>Concrete admixture with crystalline effect and concrete plasticiser <br />• possible crack healing for continuous cracks up to 0.4 mm <br />and for tapering cracks up to 0.5 mm <br />• minimisation of servicing and maintenance costs <br />• integrated concrete plasticizer (BV) after DIN EN 934-2 <br />• economical dosing in the concrete plant via dosing pump</p> <p>Concrete admixture in powder form with a crystalline effect <br />BETOCRETE-CP360-WP</p> <p>Concrete admixture with crystalline effect and sealant <br />• possible crack healing for continuous cracks up to 0.4 mm <br />and for tapering cracks up to 0.5 mm <br />• minimisation of servicing and maintenance costs <br />• integrated sealant (DM) after DIN EN 934-2 <br />• 3 kg water soluble bags available</p> <p>BETOCRETE-CP350-CI</p> <p>Concrete admixture with crystalline effect and corrosion inhibitor <br />• possible crack healing for continuous cracks up to 0.4 mm and <br />for tapering cracks up to 0.5 mm <br />• minimisation of servicing and maintenance costs <br />• 3 kg water soluble bags available</p> <p>Short terminology <br />BETOCRETE-C <br />Crystalline concrete admixture (C=Crystalline) <br />BETOCRETE-CP <br />Pulverulent concrete admixture (P=Powder) <br />BETOCRETE-CL <br />Liquid concrete admixture (L=Liquid) <br />BETOCRETE-CL210WP 2 in 1 effect / in addition to crystalline additives including sealant <br />DIN EN 934-2 (WP=Water Proofer) <br />BETOCRETE-CL170P 2 in 1 effect / in addition to crystalline additives including plasticizers <br />after DIN EN 934-2 (P=Plasticizer)</p> <p>schomburg.com 13</p> <p>Dosing</p> <p>Dosing of liquid concrete admixtures <br />Liquid BETOCRETE can be dosed directly into the concrete mix via the dosing system <br />of the concrete plant. This is done without additional work steps and precisely with <br />automated pump technology.</p> <p>Storage and dosing of liquid concrete <br />admixtures in the concrete plant <br />(photo credit: Würschum GmbH)</p> <p>In addition to IBCs, the BETOCRETE-CL products <br />are also available in barrels and canisters.</p> <p>Dosing of pulverulent products <br />Pulverulent BETOCRETE is supplied in watertight foil bags for metering into the mixer <br />or in water-soluble bags for dosing into the mixer truck.</p> <p>BETOCRETE products in water-soluble bags <br />and watertight foil bags</p> <p>14 schomburg.com</p> <p>Supplementary products for concrete sealing in new buildings</p> <p>The construction joint is the classic weak point in waterproofing. The SCHOMBURG <br />system accessories for the construction joint can provide a reliable solution here.</p> <p>Abdichtung einer Arbeitsfuge <br />mit AQUAFIN-CJ5 - Wand-Bodenplatte 1:10 <br />Waterproofing of a construction joint <br />with AQUAFIN-CJ5 - wall-slab 1:10</p> <p>In addition to grouting and expanding waterstops, the solution with the crystalline <br />construction metal waterstop offers a high level of safety. <br />>240</p> <p>150 <br />>30 <br />> 30 mm</p> <p>>250</p> <p>Omega - Holder <br />AQUAFIN - CJ5</p> <p>Waterproofing of a construction joint with <br />AQUAFIN-CJ5</p> <p>AQUAFIN-CJ5</p> <p>Bitte beachten Sie die aktuellen technischen Merkblätter. Diese finden Sie unter: www.schomburg.de <br />Please notice the current technical data sheets. You can find them at: www.schomburg.de</p> <p>Secure sealing with the crystalline joint sheet AQUAFIN-CJ5 <br />1) E xtension of the circulation of the water on the possible path through <br />the cracked joint. <br />2) C <br /> ementitious coating on the AQUAFIN-CJ5 forms a high adhesion bond with <br />the concrete, resulting in a reduced probability of cracking. <br />3) T he metal water stop is “ready to use” and therefore not prone to processing <br />errors. No film has to be peeled off. <br />4) If there is a crack in the construction joint, crystal formation is induced by <br />the metal water stop and cracks can be sealed.</p> <p>Working joint solution swelling joint tape <br />AQUAFIN-CJ6</p> <p>Construction joint solution injection hose <br />AQUAFIN-CJ1</p> <p>schomburg.com 15</p> <p>BETOCRETE renovation system <br />AQUAFIN-IC – Crystalline sealing slurry <br />The crystalline slurry is applied to the concrete body to be sealed using the spray, slurry <br />or trowel techniques. The BETOCRETE crystals migrate into the concrete body and <br />develop the crystalline sealing and concrete protection effect. <br />The images below illustrate the crack sealing ability of AQUAFIN-IC in static <br />(non-moving) cracks.</p> <p>Crack sealing ability of AQUAFIN-IC in static (non-moving) cracks. <br />The following images show the basic behaviour of AQUAFIN-IC on a concrete substrate:</p> <p>Fig. 1 </p> <p>Fig. 2 </p> <p>Fig. 3</p> <p>Untreated concrete is porous and therefore very susceptible to water penetration (Fig. 1). <br />AQUAFIN-IC (red) is applied to the concrete surface (Fig. 2). <br />The active ingredients of AQUAFIN-IC begin to penetrate the capillaries. In the capillaries, <br />the chemical substances react with the free lime and moisture and form insoluble crystals. <br />This process runs down to the bottom layer of concrete, closing the pores (Fig. 3). <br />The result: AQUAFIN-IC is not just a coating, it becomes an integral part of the concrete!</p> <p>16 schomburg.com</p> <p>FIX 20-T – Crystalling plugging mortar / ASOCRET-IM <br />Water ingress can be stopped directly with crystalline plugging mortar. <br />The ready-set mortar unfolds its crystalline sealing and protective effect surrounding <br />the area of application.</p> <p>Crystalline effective repairs can then be carried out with ASOCRET-IM</p> <p>System composition of retrospective crystalline waterproofing <br />Step 1: Block water ingress with FIX 20-T <br />Step 2: Repair large cracks and open joints with ASOCRET-IM <br />Step 3: Apply AQUAFIN-IC crystalline slurry <br />Step 4: C <br /> uring: Keep sealed concrete structure damp for 3 days</p> <p>schomburg.com 17</p> <p>Participants in the implementation of crystalline <br />waterproofing products <br />The watertight concrete structure is created through the interaction of structural <br />engineering, concrete mix and the professional application of concrete on the building <br />site. Accordingly, the interaction of those involved / those responsible in the “network” <br />is of considerable importance. <br />The role of the structural engineer: Construction and dimensioning of the concrete <br />structure in such a way that cracking due to stress and restraint is minimised. <br />The role of the concrete factory: Provision of a suitable concrete recipe, which is <br />equipped with crystalline properties via a concrete admixture. The formulation must be <br />validated in advance in the form of an initial test. <br />The role of the construction contractor: The correct ordering, application and compacting <br />as well as curing of concrete. <br />The role of construction site surveillance: In the case of watertight concrete qualities, <br />construction site monitoring is often provided in order to ensure that the correct concrete <br />recipe is introduced without errors <br />The role of SCHOMBURG: SCHOMBURG as a supplier of concrete admixtures with <br />crystalline properties, supports and advises in every phase of the project. <br />An important aspect is the recommendation for the mix design of the concrete recipe <br />in the accredited concrete laboratory and the provision of proof of suitability. <br />The network in interaction: <br />• Mix design concrete <br />• technical advice</p> <p>• Dosage admixture <br />• Concrete formulation adjustment / testing</p> <p>Concrete <br />Laboratory & <br />Technical Service <br />SCHOMBURG</p> <p>Construction site <br />monitoring</p> <p>Concrete plant</p> <p>Contractor</p> <p>• Order without errors <br />• Placement and compaction and <br />• curing concrete</p> <p>18 schomburg.com</p> <p>• Monitoring faultless <br />placement of concrete / accessories</p> <p>SCHOMBURG <br />Sealing system</p> <p>Structural designer / <br />engineer</p> <p>• Waterproofing <br />planning</p> <p>Reference projects</p> <p>With our proven and economically efficient systems, we have supported numerous <br />construction projects at home and abroad.</p> <p>Bulvar apartment building / service and residential <br />building with garage section, Poland</p> <p>Underground garage Vienybės Square Kaunas, <br />Lithuania</p> <p>Floating docks in the historic port of <br />Hamburg</p> <p>Ski jump Średnia Krokiew in Zakopane, Poland</p> <p>Ibis Center Vilnius, Lithuania</p> <p>Sea thermal spa with hot springs, Iceland</p> <p>schomburg.com 19</p> <p>The SCHOMBURG Group develops, produces <br />and distributes building product systems for <br />the areas of: <br />• Waterproofing and repair of buildings <br />• Tiles/natural stone/screed application <br />• Ground protection/floor coating systems <br />For over 85 years SCHOMBURG’s <br />development competence has been a <br />recognised feature in both the domestic <br />and the worldwide marketplace. Building <br />product systems that are produced in-house <br />are highly prized around the world.</p> <p>SCHOMBURG GmbH & Co. KG <br />Aquafinstraße 2–8 <br />D-32760 Detmold (Germany) <br />Telephone +49-5231-953-00 <br />Fax <br />+49-5231-953-333 <br />www.schomburg.com</p> <p>03/25 NT/IsK/LaA</p> <p>To meet the demanding requirements of an <br />ever-changing market, we continuously invest <br />in the research and development of new and <br />already existing products. This guarantees an <br />ever increasing product quality to the satisfaction <br />of our customers.</p> <p>Subject to change. The valid issue of the corresponding technical bulletin legally applies.</p> <p>Experts value the quality and the efficiency <br />of building product systems, the services and <br />therefore the core competence of the group <br />of companies.</p> <p>2 CONCRETE WATERPROOFING – <br />BETOCRETE-C <br />Crystalline concrete admixtures are added to <br />the concrete and protect it from reinforcement <br />and concrete corrosion; they also promote the <br />self-healing of cracks.</p> <p>2 CONCRETE WATERPROOFING – BETOCRETE-C <br />2.1</p> <p>BETOCRETE-CL170-P</p> <p>2.2</p> <p>BETOCRETE-CL210-WP</p> <p>2.3</p> <p>BETOCRETE-CP350-CI</p> <p>2.4</p> <p>BETOCRETE-CP360-WP</p> <p>SCHOMBURG <br />Problems Solved.</p> <p>BETOCRETE®-CL170-P <br />Crystalline waterproofing admixture <br />with liquefying properties. <br />Liquid concrete admixture for producing waterproof <br />concrete with the innovative 2-in-1 technology. <br />It first acts chemically and plasticises the concrete. <br />In the next step, special active catalysts, which become active upon <br />contact with water, form nanoscale crystals in the capillary system, <br />which sustainably and permanently make the concrete water tight.</p> <p>Properties <br />· Liquid. <br />· Innovative 2-in-1 technology. <br />· Crystallisation of the capillary structure. <br />· Water savings of up to 10 %. <br />· Crack healing possible for penetrating cracks up to 0.4 mm <br />and for opening cracks up to 0.5 mm. <br />· Improvement of frost-thaw resistance. <br />· Reduction of chloride migration. <br />· Minimisation of servicing and maintenance costs. <br />· Time-saving. <br />· Simple and reliable.</p> <p>Crystalline technology <br />Reduction in water penetration <br />due to nano crystals</p> <p>Technical data <br />Colour</p> <p>Colourless to brownish</p> <p>Density (at +20 °C)</p> <p>1.18 g/cm3</p> <p>Application temperature</p> <p>+8 °C to +40 °C</p> <p>Storage</p> <p>Frost-free, not below +8 °C, <br />protected from contamination; <br />12 months in the original <br />unopened container, use up <br />opened containers as soon as <br />possible.</p> <p>Packaging</p> <p>1100 kg container <br />220 kg drum <br />25 kg canister</p> <p>Water pollution class <br />(WGK)</p> <p>1 (self-classification)</p> <p>Liquefier <br />Reduction of the capillary <br />pore structure</p> <p>Please observe the valid technical data sheet:</p> <p>Technical data sheet</p> <p>BETOCRETE®-CL210-WP <br />Crystalline waterproofing admixture <br />with hydrophobic properties. <br />Liquid concrete admixture for producing waterproof <br />concrete with the innovative 2-in-1 technology. <br />It first acts chemically, reducing water absorption in the structure. <br />In the next step, special active catalysts, which become active upon <br />contact with water, form nanoscale crystals in the capillary system, <br />which sustainably and permanently make the concrete water tight.</p> <p>Properties <br />· Liquid. <br />· Innovative 2-in-1 technology. <br />· Crystallisation of the capillary structure. <br />· Reduction of capillary absorption. <br />· Crack healing possible for penetrating cracks up to 0.4 mm <br />and for opening cracks up to 0.5 mm. <br />· Improvement of frost-thaw resistance. <br />· Reduction of chloride migration. <br />· Minimisation of servicing and maintenance costs. <br />· Time-saving. <br />· Simple and reliable.</p> <p>Crystalline technology <br />Reduction in water penetration <br />due to nano crystals</p> <p>Sealant <br />Reduction of capillary water <br />penetration</p> <p>Technical data <br />Colour</p> <p>white</p> <p>Consistency</p> <p>liquid</p> <p>pH value</p> <p>approx. 11.5</p> <p>Density (at +20 °C)</p> <p>1.05 g/cm3</p> <p>Application temperature</p> <p>+5 °C to +40 °C</p> <p>Storage</p> <p>Frost-free, 12 months in <br />the original unopened <br />container at +20 °C, use <br />up opened containers <br />promptly</p> <p>Packaging</p> <p>1040 kg container <br />220 kg drum <br />25 kg canister</p> <p>Water pollution class <br />(WGK)</p> <p>1 (self-classification)</p> <p>Please observe the valid technical data sheet:</p> <p>Technical data sheet</p> <p>BETOCRETE®-CP350-CI <br />Crystalline waterproofing admixture <br />with corrosion inhibitors. <br />Powdered concrete admixture for producing waterproof <br />concrete with the innovative 2-in-1 technology. <br />Special active catalysts, which become active through contact with water, <br />form nanoscale crystals in the capillary system that make the concrete <br />permanently water tight. In addition, the reinforcing steel is protected <br />against corrosion.</p> <p>grey</p> <p>Consistency</p> <p>powder</p> <p>Bulk density</p> <p>1.12 g/m3</p> <p>Application temperature</p> <p>≥ +5 °C</p> <p>Storage</p> <p>Dry, 12 months in the original <br />unopened container, use <br />up opened containers <br />promptly</p> <p>Packaging</p> <p>3 kg water-soluble bag 20 kg <br />foil bag</p> <p>ICHE VE <br />SL</p> <p>SERLÖ <br />AS</p> <p>ACKUN <br />RP</p> <p>Crystalline technology <br />Reduction in water penetration <br />due to nano crystals</p> <p>Technical data <br />Colour</p> <p>G</p> <p>Properties <br />· Powdered. <br />· Innovative 2-in-1 technology. <br />· Crystallisation of the capillary structure. <br />· Reduction of capillary absorption. <br />· Crack healing possible for penetrating cracks up to 0.4 mm <br />and for opening cracks up to 0.5 mm. <br />· Corrosion inhibitor. <br />· Improvement of frost/thaw resistance. <br />· Minimisation of servicing and maintenance costs. <br />· Time-saving.</p> <p>W</p> <p>Corrosion protection <br />Additional protection of <br />the reinforcing steel</p> <p>Please observe the valid technical data sheet:</p> <p>Technical data sheet</p> <p>BETOCRETE®-CP360-WP <br />Crystalline waterproofing admixture <br />with hydrophobic properties. <br />Powdered concrete admixture for producing waterproof <br />concrete with the innovative 2-in-1 technology. <br />It first acts chemically, reducing water absorption in the structure. <br />In the next step, special active catalysts, which become active upon <br />contact with water, form nanoscale crystals in the capillary system, <br />which sustainably and permanently make the concrete water tight.</p> <p>Consistency</p> <p>powder</p> <p>Bulk density</p> <p>0.80 g/m3</p> <p>Application temperature</p> <p>≥ +5 °C</p> <p>Storage</p> <p>12 months in the original <br />unopened container <br />at +20 °C, use <br />up opened containers <br />promptly</p> <p>Packaging</p> <p>3 kg water-soluble bag 17 kg <br />foil bag</p> <p>Water pollution class <br />(WGK)</p> <p>1 (self-classification)</p> <p>ICHE VE <br />SL</p> <p>SERLÖ <br />AS</p> <p>ACKUN <br />RP</p> <p>Sealant <br />Reduction of capillary water <br />penetration</p> <p>grey</p> <p>W</p> <p>Crystalline technology <br />Reduction in water penetration <br />due to nano crystals</p> <p>Technical data <br />Colour</p> <p>G</p> <p>Properties <br />· Powdered. <br />· Innovative 2-in-1 technology. <br />· Crystallisation of the capillary structure. <br />· Reduction of capillary absorption. <br />· Crack healing possible for penetrating cracks up to 0.4 mm <br />and for opening cracks up to 0.5 mm. <br />· Reduction of chloride migration. <br />· Improvement of frost/thaw resistance. <br />· Minimisation of servicing and maintenance costs. <br />· Time-saving.</p> <p>Please observe the valid technical data sheet:</p> <p>Technical data sheet</p> <p>3 CONSTRUCTION JOINTS <br />Construction joints are potential voids as they can lead <br />to water ingress. <br />The AQUAFIN-CJ series and joint tapes ensure a high <br />level of safety and stop water.</p> <p>3 CONSTRUCTION JOINTS <br />3.1</p> <p>Matrix of waterproofing solutions for concrete construction system</p> <p>3.2</p> <p>AQUAFIN-CJ5</p> <p>3.3</p> <p>AQUAFIN-CJ3</p> <p>3.4</p> <p>AQUAFIN-CJ4</p> <p>3.5</p> <p>AQUAFIN-CJ6</p> <p>3.6</p> <p>AQUAFIN-CJ1</p> <p>3.7</p> <p>AQUAFIN-CJ-Set</p> <p>SCHOMBURG <br />Problems Solved.</p> <p>AQUAFIN-CJ1</p> <p>o suitable</p> <p>× particularly suitable</p> <p>ASO-Tape</p> <p>×</p> <p>External</p> <p>x</p> <p>x</p> <p>Concreted</p> <p>×</p> <p>×</p> <p>×</p> <p>×</p> <p>Bonded</p> <p>Installation type</p> <p>×</p> <p>×</p> <p>×</p> <p>O</p> <p>O</p> <p>×</p> <p>Suitable for water <br />exchange zones</p> <p>Saltwater resistant</p> <p>Crystalline self-repair of <br />the concrete</p> <p>Rain protection coating</p> <p>Peculiarities</p> <p>The information in the current technical data sheets for the products listed must be observed. These are available, along with other documentation, at schomburg.com.</p> <p>×</p> <p>5 bar</p> <p>TPE waterstop tape</p> <p>×</p> <p>×</p> <p>×</p> <p>4 bar</p> <p>TPE waterstop tape</p> <p>AQUAFIN-CJ6</p> <p>×</p> <p>×</p> <p>5 bar</p> <p>×</p> <p>×</p> <p>×</p> <p>Internal</p> <p>Crystalline joint sheet</p> <p>Waterproofing</p> <p>AQUAFIN-CJ5</p> <p>×</p> <p>×</p> <p>×</p> <p>Expansion joint</p> <p>2 bar</p> <p>2 bar</p> <p>2.5 bar</p> <p>Construction <br />joint</p> <p>Location in concrete</p> <p>Bentonite waterstop <br />tape</p> <p>AQUAFIN-CJ4</p> <p>Bentonite waterstop <br />tape</p> <p>AQUAFIN-CJ3</p> <p>Injection hose</p> <p>Maximum <br />water <br />pressure</p> <p>Solution type</p> <p>Waterproofing solutions <br />Concrete construction system</p> <p>24/26 NT/Tet/KK</p> <p>AQUAFIN®-CJ5 <br />Crystalline joint sheet, <br />15 cm × 200 cm. <br />Waterstop sheet with crystalline coating to protect <br />construction joints from water under pressure and to selfheal. <br />It initially has the effect of prolonging the cycle. As soon as the water <br />comes into contact with the crystalline coating, microcrystals grow and <br />seal the area. Due to the crystalline, cement-based coating, the joint sheet <br />bonds with the concrete to form a solid unit.</p> <p>Properties <br />· Simple application, without additional film. <br />· High adhesion to concrete. <br />· Additional sealing function through crystalline coating. <br />· Tested to 2 bar. <br />· Suitable for fresh water and salt water.</p> <p>Technical data <br />Shape</p> <p>Rectangular and flexible</p> <p>Dimensions</p> <p>1.25 x 2,000 x 150 mm</p> <p>Watertightness in installed state – 2 bar <br />joint width 0.25 mm <br />Toxicity</p> <p>none</p> <p>Reaction to fire</p> <p>Class E in accordance with <br />DIN EN 13502-1</p> <p>Packaging</p> <p>Individual sheets, each 2 linear <br />metres = 100 lm/wooden crate</p> <p>Storage</p> <p>Dry, frost-free and protected <br />from the weather, unlimited <br />storage period</p> <p>Please observe the valid technical data sheet:</p> <p>Technical data sheet</p> <p>AQUAFIN®-CJ3 <br />Bentonite swellable waterstop. <br />Bentonite swellable waterstops with swelling-retarding <br />special coating for waterproofing intersections. <br />On contact with water, the bentonite swellable waterstop tape swells and <br />seals the construction joint.</p> <p>Properties <br />· Simple application. <br />· Swelling-retardant special coating. <br />· Particularly high sodium content (>70 %). <br />· Rapid and powerful swelling. <br />· Self-injecting effect through penetration into cracks and <br />cavities. <br />· Swelling process infinitely reversible. <br />· Extremely dimensionally stable, does not become sticky even <br />at high temperatures in the summer. <br />· High inorganic content, therefore no material fatigue. <br />· Positive support of the self-healing process in the construction <br />joint by special admixtures.</p> <p>Technical data <br />Basis</p> <p>Sodium bentonite embedded <br />in a matrix of high-molecular <br />poly- isobutylene rubber, as <br />well as special fillers and <br />additives</p> <p>Shape</p> <p>Swellable waterstop tape profile <br />is rectangular and flexible</p> <p>Colour</p> <p>black/dark grey</p> <p>Dimensions</p> <p>18 x 24 mm</p> <p>Swelling capacity</p> <p>>500 %</p> <p>Weight</p> <p>approx. 730 g/m</p> <p>Water resistance in the installed <br />condition</p> <p>2 bar</p> <p>Toxicity</p> <p>Non hazardous material, non <br />toxic class, no hazard to <br />drinking water</p> <p>Packaging</p> <p>Rolls à 5 m = 6 rolls/box</p> <p>Storage</p> <p>Frost-free and protected from <br />the weather, max. 5 years</p> <p>Please observe the valid technical data sheet:</p> <p>Technical data sheet</p> <p>AQUAFIN®-CJ4 <br />Bentonite swellable waterstop with <br />patented rain protection coating. <br />Bentonite swellable waterstops with swelling-retarding <br />special coating for waterproofing intersections and <br />patented rain protection coating. <br />On contact with water, the bentonite swellable waterstop tape swells and <br />seals the construction joint. In addition, AQUAFIN-CJ4 is provided with <br />a rainproof special coating that prevents swelling up to the point of <br />concreting.</p> <p>Properties <br />· Simple application. <br />· Swelling-retardant special coating. <br />· Particularly high sodium content (>70 %). <br />· Rapid and powerful swelling. <br />· Self-injecting effect through penetration into cracks and <br />cavities. <br />· Swelling process infinitely reversible. <br />· Extremely dimensionally stable, does not become sticky even <br />at high temperatures in the summer. <br />· High inorganic content, therefore no material fatigue. <br />· Positive support of the self-healing process in the construction <br />joint by special admixtures.</p> <p>Technical data <br />Basis</p> <p>Sodium bentonite embedded <br />in a matrix of high-molecular <br />poly- isobutylene rubber, as <br />well as special fillers and <br />additives</p> <p>Shape</p> <p>Swellable waterstop tape profile <br />is rectangular and flexible</p> <p>Colour</p> <p>black/dark grey</p> <p>Dimensions</p> <p>18 x 24 mm</p> <p>Swelling capacity</p> <p>>500 %</p> <p>Weight</p> <p>approx. 730 g/m</p> <p>Water resistance in the installed <br />condition</p> <p>2 bar</p> <p>Toxicity</p> <p>Non hazardous material, <br />non toxic class, no hazard to <br />drinking water</p> <p>Packaging</p> <p>Rolls à 5 m = 6 rolls/box</p> <p>Storage</p> <p>Frost-free and protected from <br />the weather, max. 5 years</p> <p>Please observe the valid technical data sheet:</p> <p>Technical data sheet</p> <p>AQUAFIN®-CJ6 <br />Thermoplastic swelling joint tape for <br />construction joint sealing. <br />Highly swelling TPE swelling joint tape for secure <br />waterproofing of construction joints. <br />On contact with water, the TPE joint tape swells and seals the construction <br />joint. Due to the small dimensions and the high swelling capacity, secure <br />waterproofing of the joint is guaranteed.</p> <p>Properties <br />· Simple application. <br />· Rapid and powerful swelling. <br />· Self-injecting effect. <br />· Through penetration into cracks and cavities. <br />· Extremely dimensionally stable, even at high temperatures. <br />· Swelling process infinitely reversible. <br />· Suitable for fresh water and salt water.</p> <p>Technical data <br />Basis</p> <p>TPE</p> <p>Shape</p> <p>Swellable waterstop tape profile <br />is rectangular and flexible</p> <p>Colour</p> <p>red</p> <p>Density</p> <p>approx. 1.25 g/cm3</p> <p>Shore A hardness (DIN 53505) approx. 37 <br />Strength</p> <p>5 mm</p> <p>Width</p> <p>20 mm</p> <p>Swelling start at <br />water loading</p> <p>approx. 6 h</p> <p>Swelling capacity <br />(demineralised water)</p> <p>approx. 50 % after 2 h <br />approx. 460 % after 24 h <br />approx. ≥700 % after 8 d</p> <p>Swelling pressure</p> <p>approx. 1.06 N/mm2</p> <p>Please observe the valid technical data sheet:</p> <p>Technical data sheet</p> <p>AQUAFIN®-CJ1 <br />Injection hose for the waterproofing <br />of construction joints in concrete. <br />For pressurised water-tight injection of AQUAFIN-P4 in <br />construction joints. <br />By injecting after the concrete has hardened, it is possible to achieve <br />water-tight sealing of even the smallest cracks.</p> <p>Properties <br />· Can be injected with all common injection material. <br />· Sufficient cross-section of the transport channel. <br />· Prevents the cement paste from penetrating during the <br />concreting process. <br />· Easy handling due to special fastening system. <br />· No unwanted twisting when installing from the roll. <br />· The injection material exits from the hose system in a <br />concreted-in state already at practical pressure (opening <br />pressure = 0.5 bar), i.e. material is guaranteed to exit in all <br />directions. <br />· The smooth surface prevents unwanted bonding between <br />injection hose and concrete, i.e. the hose remains groutable <br />for years and does not sinter.</p> <p>Technical data <br />Basis</p> <p>W-PVC</p> <p>Colour</p> <p>blue</p> <p>Interior Ø</p> <p>6 mm</p> <p>Exterior Ø</p> <p>11 mm</p> <p>Outlet nozzle in hose</p> <p>3 – 5 mm</p> <p>Hole arrangement in hose</p> <p>Every 12 mm to 14 mm <br />arranged in an axial cross</p> <p>Injection material</p> <p>Resins, acrylates*, gels</p> <p>Injection length</p> <p>max. 12 m or on request</p> <p>Weight</p> <p>0.12 kg/m</p> <p>Packaging</p> <p>Rolls à 50 m each</p> <p>Storage</p> <p>Frost-free and protected from <br />the weather, max. 5 years</p> <p>*only if the acrylate has no corrosion-promoting properties.</p> <p>Please observe the valid technical data sheet:</p> <p>Technical data sheet</p> <p>AQUAFIN®-CJ-Set <br />Complete set incl. 10 m injection <br />hose. <br />Injection hose set with injection loop and accessories <br />for waterproofing construction joints as well as for <br />subsequent injection of cracks to seal construction joints <br />in concrete. <br />For pressurised watertight injection of AQUAFIN-P4 in construction joints <br />as well as AQUAFIN-P1 and AQUAFIN-P4 in cracks. <br />All necessary materials for injection are available.</p> <p>Properties <br />· Aids incl. 10 m injection hose. <br />· Set 1 content: 10 m AQUAFIN-CJ1, 20 cm ventilation hose, <br />red and white incl. connecting nozzle, 1 protective box, <br />injection nipples, hose clamp, 2 × 10 cm heat-shrink tubing. <br />2 pcs. sealing plugs, 1 tube PVC adhesive, 60 pcs. plastic <br />clips. All parts are pre-assembled. <br />· Set 2 content: 10 m AQUAFIN-CJ1, 2 pcs. standard packer <br />incl. injection nipple, 60 pcs. plastic clips, 2 pcs. hose clamps.</p> <p>Please observe the valid technical data sheet:</p> <p>Technical data sheet</p> <p>4 MOVEMENT JOINTS <br />If the statics require movement joints, the AQUAFIN <br />EJ-W series as well as ASO tapes offer the possibility <br />of creating watertight joints. SCHOMBURG also offers <br />further items for movement joints with the INDUFLEX <br />and ASO joint tape series.</p> <p>Please observe the valid technical data sheet:</p> <p>Technical data sheet</p> <p>4 MOVEMENT JOINTS <br />4.1</p> <p>Matrix of waterproofing solutions for concrete construction system</p> <p>4.2</p> <p>ASO-TAPE</p> <p>4.3</p> <p>INDUFLEX-PU</p> <p>4.4</p> <p>INDUFLEX-PS</p> <p>4.5</p> <p>ASO-Joint-Tape-2000-S</p> <p>SCHOMBURG <br />Problems Solved.</p> <p>ASO®-Tape <br />Thermoplastic joint tape <br />for joint sealing. <br />Externally-applied TPE joint tapes for strip-shaped <br />waterproofing of construction and movement joints. <br />A solid, water migration-proof connection with the substrate is ensured <br />by bonding with ASODUR-K4031.</p> <p>Properties <br />· Highly flexible. <br />· Easy, uniform workability. <br />· No activation required. <br />· Water tight even under negative water pressure <br />· Application without primer also on matt damp substrates. <br />· Resistant to frost, UV and ageing.</p> <p>Technical data <br />Basis</p> <p>TPE</p> <p>Colour</p> <p>grey</p> <p>Shore A hardness in accordance <br />with ISO 868</p> <p>approx. 87</p> <p>Temperature resistance</p> <p>-30 °C / +90 °C</p> <p>Processing, substrate and material <br />temperature</p> <p>+5 °C to +35 °C</p> <p>Material strength</p> <p>1.0 mm</p> <p>2.0 mm</p> <p>Impermeability to water, positive and 5 bar <br />negative based on DIN 1048 <br />Reaction to fire</p> <p>Class E in accordance with <br />DIN EN 13501-1</p> <p>Packaging</p> <p>Rolls à 20 m <br />Thickness 1.0 mm: <br />Widths: 20 and 30 cm <br />Thickness 2.0 mm: <br />Widths: 20, 30 and 50 cm</p> <p>Storage</p> <p>Dry and protected from the <br />weather, 12 months, in <br />originally unopened container; <br />after opening, use <br />within 2 months of opening</p> <p>*only if the acrylate has no corrosion-promoting properties.</p> <p>Please observe the valid technical data sheet:</p> <p>Technical data sheet</p> <p>INDUFLEX®-PU <br />Elastic 1K-PU jointing compound. <br />Used in interior and exterior areas as a joint sealant for the elastic <br />waterproofing of joints in building components.</p> <p>Properties <br />· Good chemical and mechanical resistance. <br />· Low notch sensitivity. <br />· High tear resistance. <br />· Total permissible deformation: 25 %. <br />· Used for the elastic waterproofing of joints in multi-storey car <br />parks, concreted open spaces, sewage and waste water <br />treatment plants with municipal waste water, commercial <br />kitchens. <br />· Suitable for indirect food contact.</p> <p>Technical data <br />Basis</p> <p>1-comp. polyurethane</p> <p>Colour</p> <p>grey</p> <p>Consistency</p> <p>Non slump</p> <p>Density*</p> <p>approx. 1.30 g/cm3</p> <p>Ambient and substrate temperatures min. +5 °C <br />max. +35 °C <br />at max. 80 % <br />rel. humidity <br />Skin formation*</p> <p>approx. 60–90 min.</p> <p>Curing time*</p> <p>approx. 2 mm/24 hrs.</p> <p>Packaging</p> <p>600 ml bag</p> <p>Storage</p> <p>Frost-free, cool and dry, <br />≥ +10 °C to +25 °C, <br />15 months in the original <br />unopened container, use up <br />opened containers promptly.</p> <p>* at +23 °C and 50 % rel. humidity.</p> <p>Please observe the valid technical data sheet:</p> <p>Technical data sheet</p> <p>ASO®-Joint-Tape-2000-S <br />Special joint tape for high <br />requirements and heavy loads.</p> <p>v er</p> <p>y lo</p> <p>io n</p> <p>Used for the watertight forming of expansion and <br />connecting joints in waterproofing layers. <br />ASO-Joint-Tape-2000-S is easy to apply, vapour permeable and <br />produces a tight connection with the designated waterproofing systems.</p> <p>w e m is</p> <p>s</p> <p>Properties <br />· High-quality composite material, stretchable, particularly <br />tear-resistant, water tight, water vapour diffusible, ensures <br />rapid drying of water-containing tile adhesives and sealants, <br />high resistance to aggressive media. <br />· For water tight movement and connecting joints in <br />waterproofing layers made of e.g. SANIFLEX, SANIFIN, <br />AQUAFIN-1K-PREMIUM, AQUAFIN-2K/M-PLUS, <br />AQUAFIN-RS300 and ASOFLEX-AKB e.g. in swimming pools, <br />underground garages and in areas in direct ground. <br />· Tested by the building authorities with the waterproofing <br />materials in the system. <br />· Very low-emission - GEV EMICODE EC1 PLUS. <br />· Auxiliary material in accordance with DIN 18533. <br />· Wide material: Special dimensions from 50 cm to 100 cm <br />wide are produced according to customer requirements.</p> <p>Technical data <br />Basis</p> <p>Composite material made up of <br />fleece – membrane – fleece</p> <p>Colour</p> <p>White with <br />SCHOMBURG logo</p> <p>Weight</p> <p>approx. 270 to 340 g/m3</p> <p>Thickness</p> <p>approx. 0.45 - 0.66 mm</p> <p>Packaging <br />Joint tape</p> <p>Widths 12 cm and 20 cm, ± 3 mm <br />· R olls 20 cm to 25 and 50 m <br />(up to one interface/15 m) <br />· Rolls 120 mm to 50 m <br />(up to one interface/15 m) <br />500 m in each box</p> <p>Wide material</p> <p>Storage</p> <p>Widths of 50 to 100 cm ± <br />4 mm (up to one interface/ <br />15 m), on request, sales unit <br />1 m2 <br />Cool, dry, protected from <br />sunlight and weathering <br />influences, 24 months</p> <p>Please observe the valid technical data sheet:</p> <p>Technical data sheet</p> <p>6 CRYSTALLINE WATERPROOFING <br />SOLUTIONS FOR RETROFITTING <br />AND REPAIRS</p> <p>If repairs to the concrete are necessary, <br />SCHOMBURG offers a wide range of solutions.</p> <p>6 <br />CRYSTALLINE WATERPROOFING <br />SOLUTIONS FOR RETROFITTING <br />AND REPAIRS <br />6.1</p> <p>AQUAFIN-IC</p> <p>6.2</p> <p>ASOCRET-BIS-5/40</p> <p>6.3</p> <p>ASOCRET-BIS-1/6</p> <p>6.4</p> <p>ASOCRET-IM</p> <p>6.5</p> <p>ASOCRET-KS/HB</p> <p>6.5</p> <p>ASOCRET-QM</p> <p>6.6</p> <p>FIX-20-T</p> <p>SCHOMBURG <br />Problems Solved.</p> <p>AQUAFIN®-IC <br />Crystalline waterproofing slurry. <br />Cement-based 1-component waterproofing slurry <br />for waterproofing concrete surfaces. <br />When water comes into contact with AQUAFIN-IC, nanocrystals grow <br />and block the water's path into the building structure.</p> <p>Properties <br />· Cement-based, capillary-active waterproofing slurry for <br />secure waterproofing of concrete substrates, also against <br />negative water pressure. <br />· Exterior and interior waterproofing in the basement area, of lift <br />shafts, foundations, pile foundations, floor slabs, etc. <br />· Waterproofing of containers for drinking and service water, <br />retaining basins, water treatment plants, etc. <br />· Waterproofing under screeds (screed on separating layer or <br />floating screed). <br />· Tested according to DVGW W 270, W 347 for drinking <br />water tanks.</p> <p>Technical data <br />Basis</p> <p>Sand/cement, inorganic</p> <p>Aggregate</p> <p>< 1.0 mm</p> <p>Bulk density</p> <p>1.1 kg/l</p> <p>Packaging</p> <p>25 kg bag</p> <p>Colour</p> <p>grey</p> <p>Mixing</p> <p>25 kg AQUAFIN-IC with <br />6.75–8.00 l clean water</p> <p>Pot life</p> <p>30 to 60 minutes</p> <p>Substrate/application <br />temperature</p> <p>+5 °C to +30 °C <br />Lower temperatures prolong, <br />higher temperatures shorten, <br />the setting time</p> <p>Storage</p> <p>Dry, 12 months in the original <br />unopened container, use up <br />opened containers promptly</p> <p>Please observe the valid technical data sheet:</p> <p>Technical data sheet</p> <p>ASOCRET®-BIS-5/40 <br />Repair mortar for breakage points <br />of 5–40 mm. <br />Used for horizontal and vertical surfaces as well as for overhead surfaces, <br />as a non slump reprofiling mortar up to a breakout depth of 40 mm.</p> <p>Properties <br />· Tested according to DIN EN 1504-3. <br />· Cement-based, chloride-free reprofiling mortar for vertical and <br />horizontal surfaces. <br />· Reduces the penetration of CO2. <br />· Water tight. <br />· Capable of water vapour diffusion. <br />· Frost-proof and resistant to de-icing salt. <br />· Used for horizontal, vertical and "overhead" surfaces, as a <br />non slump reprofiling mortar up to a breakout depth of <br />5–40 mm. Coating thickness up to 20 mm possible in one <br />application step. <br />Largest grain size: 2 mm <br />· As leveling mortar for swimming pools and pool construction. <br />· Can be trowelled, smoothed or sprayed using suitable <br />equipment. <br />ASOCRET-BIS-5/40 is a system component and is used in <br />combination with ASOCRET-KS/HB.</p> <p>Technical data <br />Basis</p> <p>cement</p> <p>Aggregate</p> <p>< 4.0 mm</p> <p>Bulk density</p> <p>1.6 kg/dm3</p> <p>Packaging</p> <p>25 kg bag</p> <p>Colour</p> <p>cement grey</p> <p>Workability duration</p> <p>approx. 60 min. at +20 °C</p> <p>Overcoat after</p> <p>at least 1 day</p> <p>Substrate/application <br />temperature</p> <p>+5 °C to +30 °C</p> <p>Overcoating of bonded <br />waterproof system/tiles</p> <p>approx. 24 h</p> <p>Consumption</p> <p>ca. 1.8 kg/m2/mm layer thickness</p> <p>Storage</p> <p>Dry, 12 months in the original <br />unopened container, use up <br />opened containers promptly</p> <p>Please observe the valid technical data sheet:</p> <p>Technical data sheet</p> <p>ASOCRET®-BIS-1/6 <br />Cementitious fine smoothing mortar <br />for breakage points of 1–6 mm. <br />Used for horizontal and vertical surfaces as well as for overhead surfaces, <br />as a non slump repair fine mortar up to a breakout depth of 6 mm.</p> <p>Properties <br />· Tested according to DIN EN 1504-3. <br />· Polymer-modified fine cement-based mortar. <br />· For horizontal and vertical surfaces. <br />· Water tight. <br />· Capable of water vapour diffusion. <br />· Frost-proof and resistant to de-icing salt. <br />· Reduces the penetration of CO2. <br />· High carbonation resistance. <br />· Used in concrete repair as a non slump reprofiling mortar for <br />horizontal, vertical and "overhead" surfaces with breakout <br />depths of 1–6 mm. Largest grain size: 0.5 mm. <br />· As a levelling and scratch coat.</p> <p>Technical data <br />Basis</p> <p>Pre-blended dry mortar</p> <p>Aggregate</p> <p>< 1.0 mm</p> <p>Bulk density</p> <p>approx. 2.0 kg/dm3</p> <p>Packaging</p> <p>25 kg bag</p> <p>Colour</p> <p>cement grey</p> <p>Pot life*</p> <p>approx. 60 min.</p> <p>Overcoat after</p> <p>at least 1 day</p> <p>Substrate/application <br />temperature</p> <p>min. +5 °C to max. +30 °C</p> <p>Consumption</p> <p>ca. 1.6 kg/m2/mm layer thickness</p> <p>Storage</p> <p>Dry, 12 months in the original <br />unopened container, use up <br />opened containers promptly</p> <p>* At +23 °C and 50 % rel. humidity. The stated data may be extended or shortened as a <br />consequence of weather and site conditions.</p> <p>Please observe the valid technical data sheet:</p> <p>Technical data sheet</p> <p>ASOCRET®-IM <br />Repair mortar with crystalline <br />waterproofing effect for concrete. <br />Used for water impermeable filling of opened cracks and holes that are <br />then overcoated with AQUAFIN-IC.</p> <p>Properties <br />· Capillary active mortar. <br />· Cementitious. <br />· Water tight, also suitable for negative water pressure. <br />· Open for vapour diffusion. <br />· Easy to apply. <br />· Supports self-repair of the concrete. <br />· Can also be used on wet substrates. <br />· For water impermeable filling of opened cracks and holes <br />that are then overcoated with AQUAFIN-IC. Alternatively, <br />ASOCRET-IM can also be used as coving mortar.</p> <p>Technical data <br />Basis</p> <p>Sand/cement, inorganic</p> <p>Colour</p> <p>grey</p> <p>Bulk density</p> <p>1.4 kg/dm3</p> <p>Water demand</p> <p>3.75 – 4.25 l/25 kg sack</p> <p>Mixing time</p> <p>3 minutes</p> <p>Pot life</p> <p>approx. 30 min.</p> <p>Substrate/application <br />temperature</p> <p>+5 °C to +30 °C</p> <p>Compressive strength</p> <p>approx. 20 N/mm2 (after <br />28 days)</p> <p>Packaging</p> <p>25 kg bag</p> <p>Storage</p> <p>Dry, 12 months in the original <br />unopened container, use up <br />opened containers promptly</p> <p>Please observe the valid technical data sheet:</p> <p>Technical data sheet</p> <p>ASOCRET®-KS/HB <br />Cementitious corrosion protection <br />and bond coat. <br />Used as corrosion protection for the steel reinforcement during concrete <br />repair and, at the same time, as a bond coat on concrete substrates and <br />between bedding adhesive and paving blocks.</p> <p>Properties <br />· Tested according to DIN EN 1504-7. <br />· As corrosive protection for exposed and abraded <br />reinforcement bars. <br />· As a bond coat in concrete restoration. <br />· Frost proof. <br />· Saponification resistant.</p> <p>Technical data <br />Basis</p> <p>Pre-blended dry mortar</p> <p>Aggregate</p> <p>up to 0.5 mm</p> <p>Bulk density</p> <p>approx. 1.6 kg/dm3</p> <p>Material rate</p> <p>approx. 1.6 kg/m2/mm</p> <p>Pot life*</p> <p>approx. 60 min.</p> <p>Substrate/application <br />temperature</p> <p>+5 °C to +30 °C</p> <p>Tensile adhesion strength</p> <p>> 1.5 N/mm2</p> <p>Packaging</p> <p>6 and 25 kg foil bag</p> <p>Storage</p> <p>Dry and cool, 12 months in <br />the original unopened <br />container, use up opened <br />containers promptly</p> <p>* At +23 °C and 50 % rel. humidity. The stated data may be extended or shortened as a <br />consequence of weather and site conditions.</p> <p>Please observe the valid technical data sheet:</p> <p>Technical data sheet</p> <p>FIX®-20-T <br />Rapid setting, swellable <br />waterproofing and tamping mortar. <br />A particularly rapid-setting cement-based mortar for <br />sealing water-bearing holes, cracks, fissures in concrete, <br />masonry work and natural stone structures. <br />Flowing water is stopped in seconds, supported by the integrated swelling <br />capacity.</p> <p>Properties <br />· Chloride-free, without corrosion-promoting substances. <br />· Highly reactive rapid-setting mortar. <br />· Strong bond with concrete substrates. <br />· Rapid solidification – even under water. <br />· Compatible with the AQUAFIN-IC crystalline waterproofing <br />system. <br />· For interior and exterior use.</p> <p>Technical data <br />Basis</p> <p>cement, additives</p> <p>Colour</p> <p>cement grey</p> <p>Bulk weight</p> <p>approx. 1.4 kg/dm3</p> <p>Pot life*</p> <p>approx. 2–3 min.</p> <p>Start of solidification*</p> <p>approx. 3–5 min.</p> <p>Substrate/application <br />temperature</p> <p>+5 °C to +35 °C</p> <p>Consumption</p> <p>approx. 2 kg per litre void</p> <p>Packaging</p> <p>6 and 20 kg plastic bucket</p> <p>Storage</p> <p>Dry, 12 months in the original <br />unopened container, use up <br />opened containers as soon as <br />possible.</p> <p>* At +23 °C and 50 % rel. humidity. The stated data may be extended or shortened as a <br />consequence of weather and site conditions.</p> <p>Please observe the valid technical data sheet:</p> <p>Technical data sheet</p> <p>7 PLANNING DOCUMENTS</p> <p>7 PLANNING DOCUMENTS <br />7.1</p> <p>Technical drawings</p> <p>7.2</p> <p>Matrix of waterproofing solutions for concrete construction system</p> <p>7.3</p> <p>Method statements</p> <p>7.4</p> <p>Tender Documentations</p> <p>SCHOMBURG <br />Problems Solved.</p> <p>SCHOMBURG GmbH <br />Aquafinstrasse 2 – 8 <br />D-32760 Detmold (Germany) <br />Telefon +49 - 5231- 953-00 <br />Fax <br />+49 - 5231- 953-333 <br />www.schomburg.com</p> <p>Technical drawing 1.5.27</p> <p>Waterproofing of a expansion joint <br />with <br />ASO-TAPE 1:10 <br />Abdichtung einer Bewegungsfuge <br />mit ASO-TAPE 1:10 <br />Waterproofing of an expansion joint <br />with ASO-TAPE 1:10</p> <p>>250</p> <p>20</p> <p>200</p> <p>ASO-TAPE</p> <p>The purchaser’s rights in regards to products quality are based on our sales and delivery terms. This technical drawing is strictly an example illustration and is not claimed to be exhautive. It is the <br />user’s responsibility to consult local building codes and regulations before carrying out any product applications. This version is no longer valid with the publication of a new version. Always check <br />our website for the most current valid version under www.schomburg.com.</p> <p>21/20 PZ/SE/NT/LiW</p> <p>SCHOMBURG GmbH <br />Aquafinstrasse 2 – 8 <br />D-32760 Detmold (Germany) <br />Telefon +49 - 5231- 953-00 <br />Fax <br />+49 - 5231- 953-333 <br />www.schomburg.com</p> <p>Technical drawing 1.5.24</p> <p>Waterproofing <br />Abdichtung <br />einer Arbeitsfugeof a construction joint <br />mit ASO-TAPE <br />- Wand-Bodenplatte <br />1:10 <br />with ASO-TAPE <br />– wall-slab <br />1:10 <br />Waterproofing of a construction joint <br />with ASO-TAPE - wall-slab 1:10</p> <p>>240</p> <p>>250</p> <p>200</p> <p>ASO-TAPE</p> <p>The purchaser’s rights in regards to products quality are based on our sales and delivery terms. This technical drawing is strictly an example illustration and is not claimed to be exhautive. It is the <br />user’s responsibility to consult local building codes and regulations before carrying out any product applications. This version is no longer valid with the publication of a new version. Always check <br />our website for the most current valid version under www.schomburg.com.</p> <p>21/20 PZ/SE/NT/LiW</p> <p>SCHOMBURG GmbH <br />Aquafinstrasse 2 – 8 <br />D-32760 Detmold (Germany) <br />Telefon +49 - 5231- 953-00 <br />Fax <br />+49 - 5231- 953-333 <br />www.schomburg.com</p> <p>Technical drawing 1.5.23</p> <p>Waterproofing <br />Abdichtung <br />einer Arbeitsfuge of a construction joint <br />mit ASO-TAPE <br />Wand-Wand – <br />1:10 <br />with -ASO-TAPE <br />wall-wall 1:10</p> <p>Waterproofing of a construction joint <br />with AQ-TAPE - wall-wall 1:10 <br />>240</p> <p>200</p> <p>ASO-TAPE</p> <p>The purchaser’s rights in regards to products quality are based on our sales and delivery terms. This technical drawing is strictly an example illustration and is not claimed to be exhautive. It is the <br />user’s responsibility to consult local building codes and regulations before carrying out any product applications. This version is no longer valid with the publication of a new version. Always check <br />our website for the most current valid version under www.schomburg.com.</p> <p>21/20 PZ/SE/NT/LiW</p> <p>SCHOMBURG GmbH <br />Aquafinstrasse 2 – 8 <br />D-32760 Detmold (Germany) <br />Telefon +49 - 5231- 953-00 <br />Fax <br />+49 - 5231- 953-333 <br />www.schomburg.com</p> <p>Technical drawing 1.5.22</p> <p>Waterproofing <br />Abdichtung <br />einer Arbeitsfuge of a construction joint <br />mit AQUAFIN-CJ6 <br />- Wand-Wand <br />1:10 1:10 <br />with AQ-CJ6 <br />– wall-wall</p> <p>Waterproofing of a construction joint <br />with AQUAFIN-CJ6 - wall-wall 1:10</p> <p>>240</p> <p>>80</p> <p>>80</p> <p>AQUAFIN - CJ6 <br />AQUAFIN-CA</p> <p>The purchaser’s rights in regards to products quality are based on our sales and delivery terms. This technical drawing is strictly an example illustration and is not claimed to be exhautive. It is the <br />user’s responsibility to consult local building codes and regulations before carrying out any product applications. This version is no longer valid with the publication of a new version. Always check <br />our website for the most current valid version under www.schomburg.com.</p> <p>21/20 PZ/SE/NT/LiW</p> <p>SCHOMBURG GmbH <br />Aquafinstrasse 2 – 8 <br />D-32760 Detmold (Germany) <br />Telefon +49 - 5231- 953-00 <br />Fax <br />+49 - 5231- 953-333 <br />www.schomburg.com</p> <p>Technical drawing 1.5.21</p> <p>Waterproofing <br />Abdichtung <br />einer Arbeitsfugeof a construction joint <br />mit AQUAFIN-CJ6 <br />- Wand-Bodenplatte <br />with AQ-CJ6 <br />– wall-slab 1:10 <br />1:10 <br />Waterproofing of a construction joint <br />with AQUAFIN-CJ6 - wall-slab 1:10</p> <p>>240</p> <p>>80</p> <p>>80</p> <p>AQUAFIN - CJ6</p> <p>>250</p> <p>AQUAFIN-CA</p> <p>The purchaser’s rights in regards to products quality are based on our sales and delivery terms. This technical drawing is strictly an example illustration and is not claimed to be exhautive. It is the <br />user’s responsibility to consult local building codes and regulations before carrying out any product applications. This version is no longer valid with the publication of a new version. Always check <br />our website for the most current valid version under www.schomburg.com.</p> <p>21/20 PZ/SE/NT/LiW</p> <p>SCHOMBURG GmbH <br />Aquafinstrasse 2 – 8 <br />D-32760 Detmold (Germany) <br />Telefon +49 - 5231- 953-00 <br />Fax <br />+49 - 5231- 953-333 <br />www.schomburg.com</p> <p>Technical drawing 1.5.20</p> <p>Abdichtung einer Arbeitsfuge <br />Waterproofing <br />of a construction <br />joint <br />mit AQUAFIN-CJ6 <br />- Wand-Bodenplatte <br />mit Versatz 1:10</p> <p>with AQ-CJ6 – wall-slab (with kicker) 1:10</p> <p>Waterproofing of a construction joint <br />with AQUAFIN-CJ6 - wall-slab (with kicker) 1:10</p> <p>>240</p> <p>>80</p> <p>>80</p> <p>AQUAFIN - CJ6</p> <p>>250</p> <p>AQUAFIN-CA</p> <p>The purchaser’s rights in regards to products quality are based on our sales and delivery terms. This technical drawing is strictly an example illustration and is not claimed to be exhautive. It is the <br />user’s responsibility to consult local building codes and regulations before carrying out any product applications. This version is no longer valid with the publication of a new version. Always check <br />our website for the most current valid version under www.schomburg.com.</p> <p>21/20 PZ/SE/NT/LiW</p> <p>SCHOMBURG GmbH <br />Aquafinstrasse 2 – 8 <br />D-32760 Detmold (Germany) <br />Telefon +49 - 5231- 953-00 <br />Fax <br />+49 - 5231- 953-333 <br />www.schomburg.com</p> <p>Technical drawing 1.5.19</p> <p>Waterproofing <br />Abdichtung <br />einer Arbeitsfuge of a construction joint <br />mit AQUAFIN-CJ5 <br />- Wand-Wand <br />1:10 1:10 <br />with AQ-CJ5 <br />– wall-wall</p> <p>Waterproofing of a construction joint <br />with AQUAFIN-CJ5 - wall-wall 1:10</p> <p>>240</p> <p>150</p> <p>Omega - Holder</p> <p>>30</p> <p>AQUAFIN - CJ5</p> <p>The purchaser’s rights in regards to products quality are based on our sales and delivery terms. This technical drawing is strictly an example illustration and is not claimed to be exhautive. It is the <br />user’s responsibility to consult local building codes and regulations before carrying out any product applications. This version is no longer valid with the publication of a new version. Always check <br />our website for the most current valid version under www.schomburg.com.</p> <p>21/20 PZ/SE/NT/LiW</p> <p>SCHOMBURG GmbH <br />Aquafinstrasse 2 – 8 <br />D-32760 Detmold (Germany) <br />Telefon +49 - 5231- 953-00 <br />Fax <br />+49 - 5231- 953-333 <br />www.schomburg.com</p> <p>Technical drawing 1.5.18</p> <p>Waterproofing <br />Abdichtung <br />einer Arbeitsfugeof a construction joint <br />mit AQUAFIN-CJ5 <br />- Wand-Bodenplatte <br />with AQ-CJ5 <br />– wall-slab 1:10 <br />1:10 <br />Waterproofing of a construction joint <br />with AQUAFIN-CJ5 - wall-slab 1:10</p> <p>>240</p> <p>Omega - Holder</p> <p>>30</p> <p>>250</p> <p>150</p> <p>AQUAFIN - CJ5</p> <p>The purchaser’s rights in regards to products quality are based on our sales and delivery terms. This technical drawing is strictly an example illustration and is not claimed to be exhautive. It is the <br />user’s responsibility to consult local building codes and regulations before carrying out any product applications. This version is no longer valid with the publication of a new version. Always check <br />our website for the most current valid version under www.schomburg.com.</p> <p>21/20 PZ/SE/NT/LiW</p> <p>SCHOMBURG GmbH <br />Aquafinstrasse 2 – 8 <br />D-32760 Detmold (Germany) <br />Telefon +49 - 5231- 953-00 <br />Fax <br />+49 - 5231- 953-333 <br />www.schomburg.com</p> <p>Technical drawing 1.5.17</p> <p>Abdichtung einer Arbeitsfuge <br />Waterproofing <br />of a construction <br />joint <br />mit AQUAFIN-CJ5 <br />- Wand-Bodenplatte <br />mit Versatz 1:10</p> <p>with AQ-CJ5 – wall-slab (with kicker) 1:10</p> <p>Waterproofing of a construction joint <br />with AQUAFIN-CJ5 - wall-slab (with kicker) 1:10</p> <p>>240</p> <p>Omega - Holder</p> <p>>30</p> <p>>250</p> <p>150</p> <p>AQUAFIN - CJ5</p> <p>The purchaser’s rights in regards to products quality are based on our sales and delivery terms. This technical drawing is strictly an example illustration and is not claimed to be exhautive. It is the <br />user’s responsibility to consult local building codes and regulations before carrying out any product applications. This version is no longer valid with the publication of a new version. Always check <br />our website for the most current valid version under www.schomburg.com.</p> <p>21/20 PZ/SE/NT/LiW</p> <p>SCHOMBURG GmbH <br />Aquafinstrasse 2 – 8 <br />D-32760 Detmold (Germany) <br />Telefon +49 - 5231- 953-00 <br />Fax <br />+49 - 5231- 953-333 <br />www.schomburg.com</p> <p>Technical drawing 1.5.16</p> <p>Waterproofing <br />Abdichtung <br />einer Arbeitsfuge of a construction joint <br />mit AQUAFIN-CJ4 <br />- Wand-Wand <br />1:10 1:10 <br />with AQ-CJ4 <br />– wall-wall</p> <p>Waterproofing of a construction joint <br />with AQUAFIN-CJ4 - wall-wall 1:10</p> <p>>240</p> <p>>80</p> <p>>80</p> <p>AQUAFIN - CJ4 <br />AQUAFIN-CA</p> <p>The purchaser’s rights in regards to products quality are based on our sales and delivery terms. This technical drawing is strictly an example illustration and is not claimed to be exhautive. It is the <br />user’s responsibility to consult local building codes and regulations before carrying out any product applications. This version is no longer valid with the publication of a new version. Always check <br />our website for the most current valid version under www.schomburg.com.</p> <p>21/20 PZ/SE/NT/LiW</p> <p>SCHOMBURG GmbH <br />Aquafinstrasse 2 – 8 <br />D-32760 Detmold (Germany) <br />Telefon +49 - 5231- 953-00 <br />Fax <br />+49 - 5231- 953-333 <br />www.schomburg.com</p> <p>Technical drawing 1.5.15</p> <p>Waterproofing <br />Abdichtung <br />einer Arbeitsfugeof a construction joint <br />mit AQUAFIN-CJ4 <br />- Wand-Bodenplatte <br />with AQ-CJ4 <br />– wall-slab 1:10 <br />1:10 <br />Waterproofing of a construction joint <br />with AQUAFIN-CJ4 - wall-slab 1:10</p> <p>>240</p> <p>>80</p> <p>>80</p> <p>AQUAFIN - CJ4</p> <p>>250</p> <p>AQUAFIN-CA</p> <p>The purchaser’s rights in regards to products quality are based on our sales and delivery terms. This technical drawing is strictly an example illustration and is not claimed to be exhautive. It is the <br />user’s responsibility to consult local building codes and regulations before carrying out any product applications. This version is no longer valid with the publication of a new version. Always check <br />our website for the most current valid version under www.schomburg.com.</p> <p>21/20 PZ/SE/NT/LiW</p> <p>SCHOMBURG GmbH <br />Aquafinstrasse 2 – 8 <br />D-32760 Detmold (Germany) <br />Telefon +49 - 5231- 953-00 <br />Fax <br />+49 - 5231- 953-333 <br />www.schomburg.com</p> <p>Technical drawing 1.5.14</p> <p>Abdichtung einer Arbeitsfuge <br />Waterproofing <br />of a construction <br />joint <br />mit AQUAFIN-CJ4 <br />- Wand-Bodenplatte <br />mit Versatz 1:10</p> <p>with AQ-CJ4 – wall-slab (with kicker) 1:10</p> <p>Waterproofing of a construction joint <br />with AQUAFIN-CJ4 - wall-slab (with kicker) 1:10</p> <p>>240</p> <p>>80</p> <p>>80</p> <p>AQUAFIN - CJ4</p> <p>>250</p> <p>AQUAFIN-CA</p> <p>The purchaser’s rights in regards to products quality are based on our sales and delivery terms. This technical drawing is strictly an example illustration and is not claimed to be exhautive. It is the <br />user’s responsibility to consult local building codes and regulations before carrying out any product applications. This version is no longer valid with the publication of a new version. Always check <br />our website for the most current valid version under www.schomburg.com.</p> <p>21/20 PZ/SE/NT/LiW</p> <p>SCHOMBURG GmbH <br />Aquafinstrasse 2 – 8 <br />D-32760 Detmold (Germany) <br />Telefon +49 - 5231- 953-00 <br />Fax <br />+49 - 5231- 953-333 <br />www.schomburg.com</p> <p>Technical drawing 1.5.13</p> <p>Waterproofing <br />Abdichtung <br />einer Arbeitsfuge of a construction joint <br />mit AQUAFIN-CJ3 <br />- Wand-Wand <br />1:10 1:10 <br />with AQ-CJ3 <br />– wall-wall</p> <p>Waterproofing of a construction joint <br />with AQUAFIN-CJ3 - wall-wall 1:10</p> <p>>240</p> <p>>80</p> <p>>80</p> <p>AQUAFIN - CJ3 <br />AQUAFIN-CA</p> <p>The purchaser’s rights in regards to products quality are based on our sales and delivery terms. This technical drawing is strictly an example illustration and is not claimed to be exhautive. It is the <br />user’s responsibility to consult local building codes and regulations before carrying out any product applications. This version is no longer valid with the publication of a new version. Always check <br />our website for the most current valid version under www.schomburg.com.</p> <p>21/20 PZ/SE/NT/LiW</p> <p>SCHOMBURG GmbH <br />Aquafinstrasse 2 – 8 <br />D-32760 Detmold (Germany) <br />Telefon +49 - 5231- 953-00 <br />Fax <br />+49 - 5231- 953-333 <br />www.schomburg.com</p> <p>Technical drawing 1.5.12</p> <p>Waterproofing <br />Abdichtung <br />einer Arbeitsfugeof a construction joint <br />mit AQUAFIN-CJ3 <br />- Wand-Bodenplatte <br />with AQ-CJ3 <br />– wall-slab 1:10 <br />1:10 <br />Waterproofing of a construction joint <br />with AQUAFIN-CJ3 - wall-slab 1:10</p> <p>>240</p> <p>>80</p> <p>>80</p> <p>AQUAFIN - CJ3</p> <p>>250</p> <p>AQUAFIN-CA</p> <p>The purchaser’s rights in regards to products quality are based on our sales and delivery terms. This technical drawing is strictly an example illustration and is not claimed to be exhautive. It is the <br />user’s responsibility to consult local building codes and regulations before carrying out any product applications. This version is no longer valid with the publication of a new version. Always check <br />our website for the most current valid version under www.schomburg.com.</p> <p>21/20 PZ/SE/NT/LiW</p> <p>SCHOMBURG GmbH <br />Aquafinstrasse 2 – 8 <br />D-32760 Detmold (Germany) <br />Telefon +49 - 5231- 953-00 <br />Fax <br />+49 - 5231- 953-333 <br />www.schomburg.com</p> <p>Technical drawing 1.5.11</p> <p>Abdichtung einer Arbeitsfuge <br />Waterproofing <br />of a construction <br />joint <br />mit AQUAFIN-CJ3 <br />- Wand-Bodenplatte <br />mit Versatz 1:10</p> <p>with AQ-CJ3 – wall-slab (with kicker) 1:10</p> <p>Waterproofing of a construction joint <br />with AQUAFIN-CJ3 - wall-slab (with kicker) 1:10</p> <p>>240</p> <p>>80</p> <p>>80</p> <p>AQUAFIN - CJ3</p> <p>>250</p> <p>AQUAFIN-CA</p> <p>The purchaser’s rights in regards to products quality are based on our sales and delivery terms. This technical drawing is strictly an example illustration and is not claimed to be exhautive. It is the <br />user’s responsibility to consult local building codes and regulations before carrying out any product applications. This version is no longer valid with the publication of a new version. Always check <br />our website for the most current valid version under www.schomburg.com.</p> <p>21/20 PZ/SE/NT/LiW</p> <p>SCHOMBURG GmbH <br />Aquafinstrasse 2 – 8 <br />D-32760 Detmold (Germany) <br />Telefon +49 - 5231- 953-00 <br />Fax <br />+49 - 5231- 953-333 <br />www.schomburg.com</p> <p>Technical drawing 1.5.10</p> <p>Waterproofing <br />Abdichtung <br />einer Arbeitsfuge of a construction joint <br />mit AQUAFIN-CJ1 <br />- Wand-Wand <br />1:10 1:10 <br />with AQ-CJ1 <br />– wall-wall</p> <p>Waterproofing of a construction joint <br />with AQUAFIN-CJ1 - wall-wall 1:10</p> <p>>240</p> <p>>80</p> <p>>80</p> <p>AQUAFIN-CJ1 <br />Kunststoffclip/Plastic Clip</p> <p>The purchaser’s rights in regards to products quality are based on our sales and delivery terms. This technical drawing is strictly an example illustration and is not claimed to be exhautive. It is the <br />user’s responsibility to consult local building codes and regulations before carrying out any product applications. This version is no longer valid with the publication of a new version. Always check <br />our website for the most current valid version under www.schomburg.com.</p> <p>21/20 PZ/SE/NT/LiW</p> <p>SCHOMBURG GmbH <br />Aquafinstrasse 2 – 8 <br />D-32760 Detmold (Germany) <br />Telefon +49 - 5231- 953-00 <br />Fax <br />+49 - 5231- 953-333 <br />www.schomburg.com</p> <p>Technical drawing 1.5.9</p> <p>Waterproofing <br />Abdichtung <br />einer Arbeitsfugeof a construction joint <br />mit AQUAFIN-CJ1 <br />- Wand-Bodenplatte <br />with AQ-CJ1 <br />– wall-slab 1:10 <br />1:10 <br />Waterproofing of a construction joint <br />with AQUAFIN-CJ1 - wall-slab 1:10</p> <p>>240</p> <p>>80</p> <p>>80</p> <p>AQUAFIN-CJ1</p> <p>>250</p> <p>Kunststoffclip/Plastic Clip</p> <p>The purchaser’s rights in regards to products quality are based on our sales and delivery terms. This technical drawing is strictly an example illustration and is not claimed to be exhautive. It is the <br />user’s responsibility to consult local building codes and regulations before carrying out any product applications. This version is no longer valid with the publication of a new version. Always check <br />our website for the most current valid version under www.schomburg.com.</p> <p>21/20 PZ/SE/NT/LiW</p> <p>SCHOMBURG GmbH <br />Aquafinstrasse 2 – 8 <br />D-32760 Detmold (Germany) <br />Telefon +49 - 5231- 953-00 <br />Fax <br />+49 - 5231- 953-333 <br />www.schomburg.com</p> <p>Technical drawing 1.5.8</p> <p>Abdichtung einer Arbeitsfuge <br />Waterproofing of a construction joint <br />mit AQUAFIN-CJ1 - Wand-Bodenplatte mit Versatz 1:10</p> <p>with AQ-CJ1 – wall-slab (with kicker) 1:10</p> <p>Waterproofing of a construction joint <br />with AQUAFIN-CJ1 - wall-slab (with kicker) 1:10</p> <p>>240</p> <p>>80</p> <p>>80</p> <p>AQUAFIN-CJ1</p> <p>>250</p> <p>Kunststoffclip/Plastic Clip</p> <p>The purchaser’s rights in regards to products quality are based on our sales and delivery terms. This technical drawing is strictly an example illustration and is not claimed to be exhautive. It is the <br />user’s responsibility to consult local building codes and regulations before carrying out any product applications. This version is no longer valid with the publication of a new version. Always check <br />our website for the most current valid version under www.schomburg.com.</p> <p>21/20 PZ/SE/NT/LiW</p> <p>AQUAFIN-CJ1</p> <p>o suitable</p> <p>× particularly suitable</p> <p>ASO-Tape</p> <p>×</p> <p>External</p> <p>x</p> <p>x</p> <p>Concreted</p> <p>×</p> <p>×</p> <p>×</p> <p>×</p> <p>Bonded</p> <p>Installation type</p> <p>×</p> <p>×</p> <p>×</p> <p>O</p> <p>O</p> <p>×</p> <p>Suitable for water <br />exchange zones</p> <p>Saltwater resistant</p> <p>Crystalline self-repair of <br />the concrete</p> <p>Rain protection coating</p> <p>Peculiarities</p> <p>The information in the current technical data sheets for the products listed must be observed. These are available, along with other documentation, at schomburg.com.</p> <p>×</p> <p>5 bar</p> <p>TPE waterstop tape</p> <p>×</p> <p>×</p> <p>×</p> <p>4 bar</p> <p>TPE waterstop tape</p> <p>AQUAFIN-CJ6</p> <p>×</p> <p>×</p> <p>5 bar</p> <p>×</p> <p>×</p> <p>×</p> <p>Internal</p> <p>Crystalline joint sheet</p> <p>Waterproofing</p> <p>AQUAFIN-CJ5</p> <p>×</p> <p>×</p> <p>×</p> <p>Expansion joint</p> <p>2 bar</p> <p>2 bar</p> <p>2.5 bar</p> <p>Construction <br />joint</p> <p>Location in concrete</p> <p>Bentonite waterstop <br />tape</p> <p>AQUAFIN-CJ4</p> <p>Bentonite waterstop <br />tape</p> <p>AQUAFIN-CJ3</p> <p>Injection hose</p> <p>Maximum <br />water <br />pressure</p> <p>Solution type</p> <p>Waterproofing solutions <br />Concrete construction system</p> <p>24/26 NT/Tet/KK</p> <p>SCHOMBURG GmbH & Co. KG <br />Aquafinstrasse 2–8 <br />D-32760 Detmold (Germany) <br />phone + 49-5231- 953- 00 <br />fax <br />+ 49-5231- 953-108 <br />email export@schomburg.de <br />www.schomburg.com</p> <p>Method Statement</p> <p>BETOCRETE-CP360-WP <br />Crystalline waterproofing concrete admixture</p> <p>Scope <br />This method statement covers powder crystalline <br />waterproofing admixture for concrete.</p> <p>Part 1 – General <br />This section covers materials, labour, tools and equipment <br />for installation and application of powder crystalline <br />waterproofing admixture that are used to produce <br />permanently active waterproof concrete. <br />1.1 Standards <br /> DIN EN 934-2 – Admixtures for concrete, mortar, <br />and grout – table 9: water resisting admixtures <br />1.2 Submittal <br />A. Submit two copies of Technical Data Sheet <br />containing all the instructions for use and <br />installation (TDS) and Material Safety Data Sheet <br />(MSDS). <br />B. Submit a list of SCHOMBURG GmbH & Co. KG <br />or your local SCHOMBURG/AQUAFIN <br />approved applicators (Please ask for an <br />applicator list). <br />1.3 Quality Assurance <br />A. Manufacturer Qualifications <br />The manufacturer shall certify that the specified <br />product is valid and suitable for use and <br />application as mentioned in the TDS. <br />B. Applicator Qualifications <br />Applicator shall be qualified in the field of <br />concrete protection and repair with successful <br />records. Applicator shall maintain qualified and <br />certified personnel with good repute. <br />C. Application and use of this product shall be in <br />accordance with all instructions and precautions <br />stated in the Technical Data Sheet. The MSDS <br />and local regulations should be followed during <br />handling, storage, applications and waste <br />disposal.</p> <p>1.4 Delivery, Storage and Handling <br />A. All materials shall be delivered in unopened and <br />original containers and fully identified with brand, <br />type, grade, class, batch numbers and all other <br />qualifying information. <br />B. All the delivered materials shall be stored in its <br />original packaging and elevated from the ground <br />on pallets or shelves (avoid direct contact with the <br />floor) according to the valid TDS. <br />C. All the necessary precaution shall be taken to keep <br />the product clean, dry and free from damage. <br />D. Shelf life is 12 months when stored according to <br />the above conditions and cool conditions above <br />+5 °C. <br />1.5 Job Conditions <br />A. Environmental conditions: the material shall not <br />be applied during rain and protect from strong <br />drafts. The application temperature must remain <br />lower than +40 °C, for lower temperature curing <br />time extends & for higher temperature curing time <br />reduces. During application at higher temperatures <br />protect material from direct sunlight.</p> <p>Part 2 – Product <br />2.1 Manufacturer <br /> BETOCRETE-CP360-WP as manufactured by <br />SCHOMBURG GmbH & Co. KG conforms to all <br />requirements of this method statement. <br />2.2 Materials <br /> Powder crystalline waterproofing admixture that <br />used to produce permanently active waterproof <br />concrete <br />Component: In powder form. <br />It is supplied in: <br />3 kg water-soluble bags <br />17 kg bags <br />700 kg big bags</p> <p>1/3</p> <p>07/20</p> <p>2.3 Performance Criteria <br /> BETOCRETE-CP360-WP has the following <br />properties: <br />Colour: <br />grey <br />Form: Powder <br />Density: 0.80 g/cm³ <br />Application temp.: ≥ +5 °C <br /> Compressive strength <br />according to <br />EN 12390-3 ≥ 85 % compared to untreated <br />concrete after 28 days <br />Air content <br /> according to <br />EN 12350-7 ≤ 2 % higher volume share than <br />untreated concrete <br /> Capillary water intake <br />according to <br />EN 480-5 ≤ 60 % mass portion of <br />untreated concrete after <br />28 days and 90 days curing <br />time <br />≤ 50 % mass portion of <br />untreated concrete after 7 days <br />and 7 days curing time</p> <p>mixture is homogeneous specially when stored for <br />longer periods. Assure that the water/cement ratio <br />(w/c) does not exceed 0.55 (powder crystalline <br />waterproofing admixture is included</p> <p>Dosage range <br />w/c ratio < 0.4: <br />0.75 % by weight of CEM <br /> <br />> 0.4–0.5: 0.80 % by weight of CEM <br /> <br />> 0.5–0.55: 0.90 % by weight of CEM <br />Do not exceed 1.25 % by weight of CEM. <br />Minimum Cement Content: <br />CEM I: <br />270 kg/m3 <br />CEM II: <br />290 kg/m3 <br />CEM III /A: 380 kg/m3 <br />Puzzolanic cements <br />with puzzolan content > 20 %: 300 kg/m3 <br />Granulated slag: <br />max.100 kg/m3 <br />Fly ash: <br />max. 80 kg/m3 <br />Dosage in ready-mix factory: <br />BETOCRETE-CP360-WP can be dosed together <br />with the aggregate for at least 30 seconds before <br />adding water and cement. Then mix at least for <br />45 seconds. <br />Dosage in truck mixer on the job site: <br />Dose BETOCRETE-CP360-WP directly into the <br />mixing drum. Mix thoroughly mixed for 1 min per <br />m³ of concrete, but at least 5 minutes. Use quickly.</p> <p>Part 3 – Execution <br />3.1 General: <br /> Assure that concrete mix design and proposed <br />materials are in compliance with manufacturer’s <br />recommendations. Assure that test batching and <br />material testing, if recommended by manufacturer, <br />has been carried out prior to starting concrete <br />work. Comply with manufacturer’s product data <br />and installation instructions. <br />3.2 Application: <br /> Stir powder crystalline waterproofing admixture in <br />a container provided prior to use, to assure that the</p> <p>3.3 Important Advice: <br />• Please ensure that pre-tests were made with all <br />admixtures that will be used in the concrete mix <br />• The addition of a concrete retarder can be <br />necessary when using Portland Cement Type <br />II or III. Suitability tests have to be carried out <br />before usage. <br />• It is rarely possible that <br />BETOCRETE-CP360-WP influences the setting <br />of the concrete. Our product REMITARD-20 (BV)</p> <p>2/3</p> <p>07/20</p> <p>has proven as the most effective retarder. <br />• Concrete modified with <br />BETOCRETE-CP360-WP may tend to effloresce <br />depending on the composition. <br />• Suitability tests according to valid standards <br />and norms have to be carried out prior to <br />application.</p> <p>3.4 Cleaning: <br /> Regular water flushing of dispensing equipment <br />will prolong service life and reduce breakdowns. <br />Use REINIT-BM on internal metal surfaces subject <br />to contact with concrete in concrete mixers, <br />batch plants and truck mixers regularly to prevent <br />concrete crust formations. Use ASO-R005 to <br />remove hardened concrete crusts.</p> <p>The rights of the buyer with regard to the quality of our materials are based on our terms and conditions of sale and delivery. Our technical advice team will be happy to advise you in the case <br />of requirements that exceed the scope of the application described here. In order to be binding, a legally binding written confirmation is required. The product description does not release the <br />user from a duty of care. Lay a test area in the event of uncertainty. This version becomes invalid in the event of a new version being issued. <br />3/3</p> <p>SE/KK 07/20</p> <p>SCHOMBURG GmbH & Co. KG <br />Aquafinstrasse 2–8 <br />D-32760 Detmold (Germany) <br />phone + 49-5231- 953-00 <br />fax <br />+ 49-5231- 953-108 <br />email export@schomburg.de <br />www.schomburg.com</p> <p>Method Statement</p> <p>BETOCRETE-CP350-CI <br />Crystalline waterproofing concrete admixture</p> <p>Scope <br />This method statement covers powder crystalline <br />waterproofing admixture for concrete.</p> <p>Part 1 – General <br />This section covers materials, labour, tools and equipment <br />for installation and application of powder crystalline <br />waterproofing admixture that are used to produce <br />permanently active waterproof concrete.. <br />1.1 Standards <br /> <br />1.2 Submittal <br />A. Submit two copies of Technical Data Sheet <br />containing all the instructions for use and <br />installation (TDS) and Material Safety Data Sheet <br />(MSDS). <br />B. Submit a list of SCHOMBURG GmbH & Co. KG <br />or your local SCHOMBURG/AQUAFIN <br />approved applicators (Please ask for an <br />applicator list). <br />1.3 Quality Assurance <br />A. Manufacturer Qualifications <br />The manufacturer shall certify that the specified <br />product is valid and suitable for use and <br />application as mentioned in the TDS. <br />B. Applicator Qualifications <br />Applicator shall be qualified in the field of <br />concrete protection and repair with successful <br />records. Applicator shall maintain qualified and <br />certified personnel with good repute. <br />C. Application and use of this product shall be in <br />accordance with all instructions and precautions <br />stated in the Technical Data Sheet. The MSDS <br />and local regulations should be followed during <br />handling, storage, applications and waste <br />disposal.</p> <p>1.4 Delivery, Storage and Handling <br />A. All materials shall be delivered in unopened and <br />original containers and fully identified with brand, <br />type, grade, class, batch numbers and all other <br />qualifying information. <br />B. All the delivered materials shall be stored in its <br />original packaging and elevated from the ground <br />on pallets or shelves (avoid direct contact with the <br />floor) according to the valid TDS. <br />C. All the necessary precaution shall be taken to keep <br />the product clean, dry and free from damage. <br />D. Shelf life is 12 months when stored according to <br />the above conditions and cool conditions above <br />+5 °C. <br />1.5 Job Conditions <br />A. Environmental conditions: the material shall not <br />be applied during rain and protect from strong <br />drafts. The application temperature must remain <br />lower than +40 °C, for lower temperature curing <br />time extends & for higher temperature curing time <br />reduces. During application at higher temperatures <br />protect material from direct sunlight.</p> <p>Part 2 – Product <br />2.1 Manufacturer <br /> BETOCRETE-CP350-CI as manufactured by <br />SCHOMBURG GmbH & Co. KG conforms to all <br />requirements of this method statement. <br />2.2 Materials <br /> Powder crystalline waterproofing admixture that <br />used to produce permanently active waterproof <br />concrete <br />Component: In powder form. <br />It is supplied in: <br />20 kg bags <br />1,000 kg big bags</p> <p>1/3</p> <p>08/20</p> <p>2.3 Performance Criteria <br /> BETOCRETE-CP350-CI has the following <br />properties: <br />Colour: <br />grey <br />Form: Powder <br />Density: 1.12 g/cm³ <br />Application Temp.: ≥ +5 °C</p> <p>Puzzolanic cements <br />with puzzolan content > 20 %: 300 kg/m3 <br />Granulated slag: <br />max.100 kg/m3 <br />Fly ash: <br />max. 80 kg/m3</p> <p>Dosage in ready-mix factory: <br />BETOCRETE-CP350-CI with the aggregate for <br />at least 30 seconds before adding water and <br />cement. Then mix at least for 45 seconds.</p> <p>Part 3 – Execution <br />3.1 General: <br /> Assure that concrete mix design and proposed <br />materials are in compliance with manufacturer’s <br />recommendations. <br />Assure that test batching and material testing, if <br />recommended by manufacturer, has been carried <br />out prior to starting concrete work. <br />Comply with manufacturer’s product data and <br />installation instructions. <br />3.2 Application: <br /> Stir powder crystalline waterproofing admixture in <br />a container provided prior to use, to assure that the <br />mixture is homogeneous specially when stored for <br />longer periods. Assure that the water/cement ratio <br />(w/c) does not exceed 0.55 (powder crystalline <br />waterproofing admixture is included.</p> <p>Dosage range <br />w/c ratio < 0.4: <br />0.75 % by weight of CEM <br />> 0.4–0.5: 0.80 % by weight of CEM <br />> 0.5–0.55: 0.90 % by weight of CEM <br />Do not exceed 1.25 % by weight of CEM. <br />Minimum Cement Content: <br />CEM I: <br />270 kg/m3 <br />CEM II: <br />290 kg/m3 <br />CEM III /A: 380 kg/m3</p> <p>Dosage in truck mixer on the job site: <br />Dose BETOCRETE-CP350-CI directly into the mixing <br />drum. Mix thoroughly mixed for 1 min per m³ <br />of concrete, but at least 5 minutes. Pour without <br />delay. <br />3.3 Important Advice: <br />• Please ensure that pre-tests were made with all <br />admixtures that will be used in the concrete mix <br />• The addition of a concrete retarder can be <br />necessary when using Portland Cement Type II <br />or III. Suitability tests have to be carried out <br />before usage. <br />• It is rarely possible that <br />BETOCRETE-CP350-CI influences the setting of <br />the concrete. Our product Ruxolith T5 (VZ) has <br />proven as the most effective retarder. <br />• Concrete modified with <br />BETOCRETE-CP350-CI may tend to effloresce <br />depending on the composition.</p> <p>3.4 Cleaning: <br />Regular water flushing of dispensing equipment <br />will prolong service life and reduce breakdowns. <br />Use REINIT-BM on internal metal surfaces subject <br />to contact with concrete in concrete mixers, <br />batch plants and truck mixers regularly to prevent <br />concrete crust formations. Use ASO-R005 to <br />remove hardened concrete crusts.</p> <p>2/3</p> <p>28/26</p> <p>SCHOMBURG GmbH & Co. KG <br />Aquafinstrasse 2–8 <br />D-32760 Detmold (Germany) <br />phone + 49-5231- 953- 00 <br />fax <br />+ 49-5231- 953-108 <br />email export@schomburg.de <br />www.schomburg.com</p> <p>Method Statement</p> <p>BETOCRETE-CL210-WP <br />Crystalline waterproofing concrete admixture</p> <p>Scope <br />This method statement covers powder crystalline <br />waterproofing admixture for concrete.</p> <p>Part 1 – General <br />This section covers materials, labour, tools and equipment <br />for installation and application of liquid crystalline <br />waterproofing admixture that are used to produce <br />permanently active waterproof concrete. <br />1.1 Standards <br /> DIN EN 934-2 – Admixtures for concrete, mortar, <br />and grout – table 9: water resisting admixtures <br />1.2 Submittal <br />A. Submit two copies of Technical Data Sheet <br />containing all the instructions for use and installation <br />(TDS) and Material Safety Data Sheet (MSDS). <br />B. Submit a list of SCHOMBURG GmbH & Co. KG <br />or your local SCHOMBURG/AQUAFIN <br />approved applicators (Please ask for an <br />applicator list). <br />1.3 Quality Assurance <br />A. Manufacturer Qualifications <br />The manufacturer shall certify that the specified <br />product is valid and suitable for use and <br />application as mentioned in the TDS. <br />B. Applicator Qualifications <br />Applicator shall be qualified in the field of <br />concrete protection and repair with successful <br />records. Applicator shall maintain qualified and <br />certified personnel with good repute. <br />C. Application and use of this product shall be in <br />accordance with all instructions and precautions <br />stated in the Technical Data Sheet. The MSDS <br />and local regulations should be followed during <br />handling, storage, applications and waste <br />disposal.</p> <p>1.4 Delivery, Storage and Handling <br />A. All materials shall be delivered in unopened and <br />original containers and fully identified with brand, <br />type, grade, class, batch numbers and all other <br />qualifying information. <br />B. All the delivered materials shall be stored in its <br />original packaging and elevated from the ground <br />on pallets or shelves (avoid direct contact with the <br />floor) according to the valid TDS. <br />C. All the necessary precaution shall be taken to keep <br />the product clean, dry and free from damage. <br />D. Shelf life is 12 months when stored according to <br />the above conditions and cool conditions above <br />+5 °C. <br />1.5 Job Conditions <br />A. Environmental conditions: the material shall not <br />be applied during rain and protect from strong <br />drafts. The application temperature must remain <br />lower than +40 °C, for lower temperature curing <br />time extends & for higher temperature curing time <br />reduces. During application at higher temperatures <br />protect material from direct sunlight.</p> <p>Part 2 – Product <br />2.1 Manufacturer <br /> BETOCRETE-CL210-WP as manufactured by <br />SCHOMBURG GmbH & Co. KG conforms to all <br />requirements of this method statement. <br />2.2 Materials <br /> Liquid crystalline waterproofing admixture that <br />used to produce permanently active waterproof <br />concrete. <br />Component: In liquid form. <br />It is supplied in: <br />25 kg canister <br />220 kg drum <br />1,040 kg container</p> <p>1/3</p> <p>08/20</p> <p>2.3 Performance Criteria <br /> BETOCRETE-CL210-WP has the following <br />properties: <br />Colour: <br />white <br />Form: <br />Liquid <br />Density: <br />1.05 g/cm³ <br />Application temp.: +5 °C to +40 °C <br /> Compressive strength <br />according to <br />EN 12390-3 ≥ 85 % compared to untreated <br />concrete after 28 days <br />Air content <br />according to <br />EN 12350-7 ≤ 2 % higher volume share than <br />untreated concrete <br /> Capillary water intake <br />According to <br />EN 480-5 ≤ 60 % mass portion of <br />untreated concrete after <br />28 days and 90 days curing <br />time ≤ 50 % mass portion of <br />untreated concrete after 7 days <br />and 7 days curing time</p> <p>longer periods. Assure that the water/cement ratio <br />(w/c) does not exceed 0.55 (liquid crystalline <br />waterproofing admixture is included.</p> <p>Dosage range <br />w/c ratio < 0.4: <br />1.75 % by weight of CEM <br /> <br />> 0.4–0.5: 1.80 % by weight of CEM <br /> <br />> 0.5–0.55: 2.00 % by weight of CEM <br />Do not exceed 2.25 % by weight of CEM. <br />Minimum Cement Content: <br />CEM I: <br />270 kg/m3 <br />CEM II: <br />290 kg/m3 <br />CEM III /A: 380 kg/m3 <br />Puzzolanic cements <br />with puzzolan content > 20 %: 300 kg/m3 <br />Granulated slag: <br />max.100 kg/m3 <br />Fly ash: <br />max. 80 kg/m3 <br />Dosage in ready-mix factory: <br />BETOCRETE-CL-210-WP can be added to the mix <br />water or added to the finished concrete mix. <br />Dosage in truck mixer on the job site: <br />Dose BETOCRETE-CL210-WP directly into the <br />mixing drum. Mix thoroughly mixed for 1 min per <br />m³ of concrete, but at least 5 minutes. Use quickly</p> <p>Part 3 – Execution <br />3.1 General: <br /> Assure that concrete mix design and proposed <br />materials are in compliance with manufacturer’s <br />recommendations. Assure that test batching and <br />material testing, if recommended by manufacturer, <br />has been carried out prior to starting concrete <br />work. Comply with manufacturer’s product data <br />and installation instructions. <br />3.2 Application: <br /> Stir liquid crystalline waterproofing admixture in a <br />container provided prior to use, to assure that the <br />mixture is homogeneous specially when stored for</p> <p>3.3 Important Advice: <br />• Please ensure that pre-tests were made with all <br />admixtures that will be used in the concrete mix <br />• A storage temperature of > 30 °C can lead to <br />parts of BETOCRETE-CL210-WP settling. After <br />thorough mixing, this has no influence on the <br />product features <br />• BETOCRETE-CL210-WP has to be thoroughly <br />mixed after a longer storage period (> 2 months) <br />• The addition of a concrete retarder can be <br />necessary when using Portland Cement Type <br />II or III. Suitability tests have to be carried out <br />before usage.</p> <p>2/3</p> <p>28/26</p> <p>• It is rarely possible that <br />BETOCRETE-CL210-WP influences the setting of <br />the concrete. Our product REMITARD 20(BV) <br />has proven as the most effective retarder. <br />• Concrete modified with <br />BETOCRETE-CL210-WP may tend to effloresce <br />depending on the composition. <br />• If the BETOCRETE-CL210-WP was stored at <br />temperatures below +5°C crystals may form, <br />BETOCRETE-CL210-WP is suitable for usage <br />again after warming up to minimum +15 °C <br />followed by stirring or homogenizing. <br />• Suitability tests according to valid standards <br />and norms have to be carried out prior to <br />application.</p> <p>3.4 Cleaning: <br /> Regular water flushing of dispensing equipment <br />will prolong service life and reduce breakdowns. <br />Use REINIT-BM on internal metal surfaces subject <br />to contact with concrete in concrete mixers, <br />batch plants and truck mixers regularly to prevent <br />concrete crust formations. Use ASO-R005 to <br />remove hardened concrete crusts.</p> <p>The rights of the buyer with regard to the quality of our materials are based on our terms and conditions of sale and delivery. Our technical advice team will be happy to advise you in the case <br />of requirements that exceed the scope of the application described here. In order to be binding, a legally binding written confirmation is required. The product description does not release the <br />user from a duty of care. Lay a test area in the event of uncertainty. This version becomes invalid in the event of a new version being issued. <br />3/3</p> <p>SE/KK 28/26</p> <p>SCHOMBURG GmbH & Co. KG <br />Aquafinstrasse 2–8 <br />D-32760 Detmold (Germany) <br />phone + 49-5231- 953-00 <br />fax <br />+ 49-5231- 953-108 <br />email export@schomburg.de <br />www.schomburg.com</p> <p>Method Statement</p> <p>BETOCRETE-CL170-P <br />Crystalline waterproofing concrete admixture</p> <p>Scope <br />This method statement covers liquid crystalline <br />waterproofing admixture for concrete. <br />Part 1 – General <br />his section covers materials, labour, tools and equipment <br />for installation and application of liquid crystalline <br />waterproofing admixture that are used to produce <br />permanently active waterproof concrete. <br />1.1 Standards <br /> DIN EN 934-2 – Admixtures for concrete, mortar, <br />and grout – table 2: water reducing / plasticizing <br />admixtures <br />1.2 Submittal <br />A. <br /> Submit two copies of Technical Data Sheet <br />containing all the instructions for use and <br />installation (TDS) and Material Safety Data Sheet <br />(MSDS). <br />B. <br /> Submit a list of SCHOMBURG GmbH & Co. KG <br />or your local SCHOMBURG/AQUAFIN <br />approved applicators (Please ask for an <br />applicator list). <br />1.3 Quality Assurance <br />A. Manufacturer Qualifications <br />The manufacturer shall certify that the specified <br />product is valid and suitable for use and <br />application as mentioned in the TDS. <br />B. Applicator Qualifications <br />Applicator shall be qualified in the field of <br />concrete protection and repair with successful <br />records. Applicator shall maintain qualified and <br />certified personnel with good repute. <br />C. <br /> Application and use of this product shall be in <br />accordance with all instructions and precautions <br />stated in the Technical Data Sheet. The MSDS <br />and local regulations should be followed during <br />handling, storage, applications and waste disposal</p> <p>1.4 Delivery, Storage and Handling <br />A. <br /> All materials shall be delivered in unopened and <br />original containers and fully identified with brand, <br />type, grade, class, batch numbers and all other <br />qualifying information. <br />B. <br /> All the delivered materials shall be stored in its <br />original packaging and elevated from the ground <br />on pallets or shelves (avoid direct contact with the <br />floor) according to the valid TDS. <br />C. <br /> All the necessary precaution shall be taken to keep <br />the product clean, dry and free from damage. <br />D. <br /> Shelf life is 12 months when stored according to <br />the above conditions and cool conditions above <br />+5 °C. <br />1.5 Job Conditions <br />A. <br /> Environmental conditions: the material shall not <br />be applied during rain and protect from strong <br />drafts. The application temperature must remain <br />lower than +40 °C, for lower temperature curing <br />time extends & for higher temperature curing time <br />reduces. During application at higher temperatures <br />protect material from direct sunlight.</p> <p>Part 2 – Product <br />2.1 Manufacturer <br /> BETOCRETE-CL170-P as manufactured by <br />SCHOMBURG GmbH & Co. KG conforms to all <br />requirements of this method statement <br />2.2 Materials <br /> Liquid crystalline waterproofing admixture that <br />used to produce permanently active waterproof <br />concrete <br />Component: In liquid form. <br /> It is supplied in: <br />25 kg canister <br />220 kg drum <br />1,040 kg container</p> <p>1/3</p> <p>08/20</p> <p>2.3 Performance Criteria <br /> BETOCRETE-CL170-P has the following properties: <br />Colour: <br />colourless, clear <br />Form: Liquid <br />Density: 1.19 g/cm³ <br />Application temp.: +5°C to +40°C <br /> Compressive strength <br />according to <br />EN 12390-3 ≥110 % compared to untreated <br />concrete after 7/28 days <br />Air content <br /> according to <br />EN 12350-7 ≤ 2 % higher volume share than <br />untreated concrete <br /> Reduction of <br />Water requirement <br />a <br /> ccording to <br />EN 12350-2 or <br />EN 12350-5 ≥ 5 % slump increase or flow <br />increase compared to <br /> untreated concrete</p> <p>Dosage range <br />w/c ratio < 0.4: <br />0.75 % by weight of CEM <br />> 0.4–0.5: 0.80 % by weight of CEM <br />> 0.5–0.55: 0.90 % by weight of CEM <br />Do not exceed 2.25 % by weight of CEM. <br />Minimum Cement Content: <br />CEM I: <br />270 kg/m3 <br />CEM II: <br />290 kg/m3 <br />CEM III /A: 380 kg/m3 <br />Puzzolanic cements <br />with puzzolan content > 20 %: 300 kg/m3 <br />Granulated slag: <br />max.100 kg/m3 <br />Fly ash: <br />max. 80 kg/m3 <br />Dosage in ready-mix factory: <br />BETOCRETE-CL-170-P can be added to the mix <br />water or added to the finished concrete mix. <br />Dosage in truck mixer on the job site: <br />Dose BETOCRETE-CL170-P directly into the mixing <br />drum. Mix thoroughly mixed for 1 min per m³ of <br />concrete, but at least 5 minutes. Use quickly</p> <p>Part 3 – Execution <br />3.1 General: <br /> Assure that concrete mix design and proposed <br />materials are in compliance with manufacturer’s <br />recommendations. Assure that test batching and <br />material testing, if recommended by manufacturer, <br />has been carried out prior to starting concrete <br />work. Comply with manufacturer’s product data <br />and installation instructions.. <br />3.2 Application: <br /> Stir liquid crystalline waterproofing admixture in a <br />container provided prior to use, to assure that the <br />mixture is homogeneous specially when stored for <br />longer periods. Assure that the water/cement ratio <br />(w/c) does not exceed 0.55 (liquid crystalline <br />waterproofing admixture is included.</p> <p>3.3 Important Advice: <br />• Please ensure that pre-tests were made with all <br />admixtures that will be used in the concrete mix <br />• A storage temperature of >30 °C can lead to <br />a brown discoloration of BETOCRETE-CL170-P. <br />This has no influence on the product features. <br />• BETOCRETE-CL170-P has to be thoroughly <br />mixed after a longer storage period (> 2 months) <br />• The addition of a concrete retarder can be <br />necessary when using Portland Cement Type <br />II or III. Suitability tests have to be carried out <br />before usage. <br />• It is rarely possible that BETOCRETE-CL170-P <br />influences the setting of the concrete. Our <br />product RUXOLITH-T5 (VZ) has proven as the <br />most effective retarder. <br />• Concrete modified with BETOCRETE-CL170-P</p> <p>2/3</p> <p>28/26</p> <p>may tend to effloresce depending on the <br />composition. <br />• If the BETOCRETE-CL170-P was stored at <br />temperatures below +5 °C crystals may form, <br />BETOCRETE-CL170-P is suitable for usage again <br />after warming up to minimum +15 °C followed <br />by stirring or homogenizing. <br />• Suitability tests according to valid standards <br />and norms have to be carried out prior to <br />application.</p> <p>3.4 Cleaning: <br /> Regular water flushing of dispensing equipment <br />will prolong service life and reduce breakdowns. <br />Use REINIT-BM on internal metal surfaces subject <br />to contact with concrete in concrete mixers, <br />batch plants and truck mixers regularly to prevent <br />concrete crust formations. Use ASO-R005 to <br />remove hardened concrete crusts.</p> <p>The rights of the buyer with regard to the quality of our materials are based on our terms and conditions of sale and delivery. Our technical advice team will be happy to advise you in the case <br />of requirements that exceed the scope of the application described here. In order to be binding, a legally binding written confirmation is required. The product description does not release the <br />user from a duty of care. Lay a test area in the event of uncertainty. This version becomes invalid in the event of a new version being issued. <br />3/3</p> <p>SE/KK 28/26</p> <p>SCHOMBURG GmbH & Co. KG <br />Aquafinstrasse 2–8 <br />D-32760 Detmold (Germany) <br />phone + 49-5231- 953- 00 <br />fax <br />+ 49-5231- 953-108 <br />email export@schomburg.de <br />www.schomburg.com</p> <p>Method Statement</p> <p>ASO®-Tape <br />Thermoplastic joint tape for waterproofing joints</p> <p>Scope <br />This method statement covers thermoplastic joint tape for <br />waterproofing joints.</p> <p>Part 1 – General <br />This section covers materials, labour, tools and equipment <br />for installation and application of Thermoplastic joint tape <br />for waterproofing joints. <br />1.1 Standards <br />1.2 Submittal <br />A. Submit two copies of Technical Data Sheet <br />containing all the instructions for use and <br />installation (TDS) and Material Safety Data Sheet <br />(MSDS). <br />B. Submit a list of SCHOMBURG GmbH & Co. KG <br />or your local SCHOMBURG/AQUAFIN <br />approved applicators (Please ask for an <br />applicator list). <br />1.3 Quality Assurance <br />A. Manufacturer Qualifications <br />The manufacturer shall certify that the specified <br />product is valid and suitable for use and <br />application as mentioned in the TDS. <br />A. Applicator Qualifications <br />Applicator shall be qualified in the field of <br />concrete protection and repair with successful <br />records. Applicator shall maintain qualified and <br />certified personnel with good repute. <br />B. Application and use of this product shall be in <br />accordance with all instructions and precautions <br />stated in the Technical Data Sheet. The MSDS <br />and local regulations should be followed during <br />handling, storage, applications and waste <br />disposal.</p> <p>1.4 Delivery, Storage and Handling <br />A. All materials shall be delivered in unopened and <br />original containers and fully identified with brand, <br />type, grade, class, batch numbers and all other <br />qualifying information. <br />B. All the delivered materials shall be stored in its <br />original packaging and elevated from the ground <br />on pallets or shelves (avoid direct contact with the <br />floor) according to the valid TDS. <br />C. All the necessary precaution shall be taken to keep <br />the product clean, dry and free from damage. <br />Shelf life is 12 months when stored according to <br />the above conditions and cool conditions abov <br />+5 °C. <br />1.5 Job Conditions <br />A. Environmental conditions: the material shall not <br />be applied during rain and protect from strong <br />drafts. The application temperature must remain <br />lower than +40 °C, for lower temperature curing <br />time extends & for higher temperature curing time <br />reduces. During application at higher temperatures <br />protect material from direct sunlight.</p> <p>Part 2 – Product <br />2.1 Manufacturer <br /> ASO-Tape as manufactured by <br />SCHOMBURG GmbH & Co. KG conforms to all <br />requirements of this method statement. <br />2.2 Materials <br />A. <br />“Highly flexible thermoplastic joint tape” <br />2.3 Performance Criteria <br />ASO-Tape has the following properties: <br />Basis: <br />TPE (Thermoplastic Elastomer) <br />Colour: <br />grey <br /> </p> <p>1/3</p> <p>07/20</p> <p>Shore a hardness <br />to ISO 868: <br />approx. 87 <br /> Temperature <br />resistance: -30 °C/+90 °C <br /> Application, substrate <br />and material <br />temperature: +5 °C to +35 °C <br />Material thickness</p> <p>1.0 mm</p> <p>2.0 mm</p> <p>Weight per unit area, g/m²</p> <p>approx. 900</p> <p>approx. 1800</p> <p>Tensile strength at break, <br />to DIN EN ISO 527-3, N/mm²</p> <p>approx. 14.0</p> <p>approx. 14.0</p> <p>Elongation at break, <br />to DIN EN ISO 527-3, %</p> <p>approx. 1000 approx. 1000</p> <p>Tear propogation strength, <br />to DIN 12310-2, N:</p> <p>approx. 100</p> <p>approx. 200</p> <p>Consumption ASODUR-K4031: <br />Consumption in kg/m <br />Size/Thickness</p> <p>1.0 mm</p> <p>2.0 mm</p> <p>150 mm</p> <p>approx. 0.8</p> <p>approx. 1.4</p> <p>200 mm</p> <p>approx. 1.0</p> <p>approx. 1.5</p> <p>250 mm</p> <p>approx. 1.1</p> <p>approx. 1.7</p> <p>300 mm</p> <p>approx. 1.3</p> <p>approx. 1.8</p> <p>500 mm</p> <p>approx. 1.8</p> <p>approx. 2.4</p> <p>Does not consider extra material consumption for uneven <br />substrates. <br />Combined test with ASODUR-K4031: <br />Tensile adhesion <br />strength, to PG- ÜBB: > 3.0 N/mm² with break in <br />concrete <br />Water impermeability, <br />positive and negative <br />according to DIN 1048: 5 bar <br />Crack bridging to PG-ÜBB,1.0 mm <br />crack held for 28 d water <br />pressure 0.75 bar: <br />passed</p> <p>Reaction to fire: <br /> Class E to DIN EN 13501-1 <br />Packaging: 20 m rolls <br />Sizes: 150, 200, 250, 300, 500 <br />1000 mm <br />Storage: <br /> Dry and protected from <br />weathering, 12 months in the <br />original unopened packaging. <br />Use within 2 months once <br />opened.</p> <p>Part 3 – Execution <br />3.1 General <br /> ASO-Tape is used in combination with <br />ASODUR-K4031 for waterproofing construction <br />joints and movement joints as well as for <br />waterproofing cracks and voids in concrete <br />construction. It is additionally suitable for <br />waterproofing transitions or differing building <br />materials. <br />3.2 Surface preparation: <br /> The substrate must be clean and load-bearing as <br />well as free from adhesion inhibiting materials. At <br />the time of installation it may be matt damp but <br />not wet or with saturated pores. In the area to be <br />waterproofed, mechanically prepare the substrate <br />using suitable means e.g. planing, scabbling or <br />grit blasting etc., in order to ensure a good bond. <br />When using on substrates other than concrete, <br />assess with a trial adhesion test. When applying <br />joint waterproofing as strips it is essential that the <br />concrete has waterproof qualities. Otherwise the <br />joint waterproofing must be used in combination <br />with a surface-applied waterproof membrane <br />3.3 Application: <br /> Coat the prepared substrate on both sides of the <br />joint to be bridged with ASODUR-K4031 to a</p> <p>2/3</p> <p>07/20</p> <p>width min. 1 cm wider than the ASO-Tape being <br />used. Then lay the joint tape and thoroughly bed <br />into the adhesive layer with a trowel or pressure <br />roller without voids or folds and coat over the top. <br />In so doing, ensure that the joint tape is <br />completely bedded. The adhesive or smoothing <br />coat thickness should never be less than 1 mm. <br />Overlap butt joints by a min. of 5 to 10 cm and <br />bond or alternatively hot air weld.</p> <p>3.4 Cleaning: <br /> During continued application, all tools must be <br />regularly & thoroughly cleaned with water and/ <br />or solvent (ASO-R001) every 25 to 40 minutes <br />(dependant on temperature) to prevent the product <br />from setting on tool surfaces. Thorough cleaning <br />must also be carried out immediately at the end of <br />works or whenever work is suspended.</p> <p>3.3.1 Movement joints: <br /> <br />Movement joints always require a 2 mm joint <br />tape and can either be laid flush or in a loop <br />dependent on the project. To accomodate <br />movement, leave an unbonded section of tape in <br />the expansion area. Dependent on the installation <br />and loading e.g. overhead use or negative water <br />pressure, a reinforcing or supporting construction <br />may be necessary. <br />3.3.2 Hot air welding: <br /> The joint tapes are cut to suit the project (butt joints <br />or corner joints) and laid on a flat substrate. Butt <br />joints are to be overlapped by a min. 5 cm. The <br />overlap area is to be roughened with abrasive <br />paper and cleaned. Welding is carried out with <br />hot air equipment with a wide nozzle and a <br />pressure roller. The welding temperature (reference <br />values: approx. 300–350 °C) is to be set by a <br />trial weld. The joints in the tapes are laid on <br />top of one another appropriately and fixed at the <br />edges by selective welding in order to prevent <br />slipping during welding. Then the wide nozzle of <br />the hot air tool is drawn slowly and evenly over <br />the overlap area and fully joined together with a <br />pressure roller. Before installing check the weld for <br />a complete watertight bond.</p> <p>The rights of the buyer with regard to the quality of our materials are based on our terms and conditions of sale and delivery. Our technical advice team will be happy to advise you in the case <br />of requirements that exceed the scope of the application described here. In order to be binding, a legally binding written confirmation is required. The product description does not release the <br />user from a duty of care. Lay a test area in the event of uncertainty. This version becomes invalid in the event of a new version being issued. <br />3/3</p> <p>SE/KK 07/20</p> <p>SCHOMBURG GmbH & Co. KG <br />Aquafinstrasse 2–8 <br />D-32760 Detmold (Germany) <br />phone + 49-5231- 953-00 <br />fax <br />+ 49-5231- 953-108 <br />email export@schomburg.de <br />www.schomburg.com</p> <p>Method Statement</p> <p>AQUAFIN®-CJ6 <br />Thermoplastic expansive waterstop for waterproofing construction joints</p> <p>Scope <br />This method statement covers internal and external <br />waterstops for expansion and construction joints.</p> <p>Part 1 – General <br />This section covers materials, labour, tools and equipment <br />for installation and application of TPE construction joint <br />waterstops. <br />1.1 Standards <br />Factory standard. <br />1.2 Submittal <br />A. Submit two copies of Technical Data Sheet <br />containing all the instructions for use and installation <br />(TDS) and Material Safety Data Sheet (MSDS). <br />B. <br /> Submit a list of SCHOMBURG GmbH & Co. KG or <br />your local SCHOMBURG/AQUAFIN approved <br />applicators (Please ask for an applicator list). <br />1.3 Quality Assurance <br />A. AManufacturer Qualifications <br />The manufacturer shall certify that the specified <br />product is valid and suitable for use and <br />application as mentioned in the TDS. <br />B. Applicator Qualifications <br />Applicator shall be qualified in the field of concrete <br />protection and repair with successful records. <br />Applicator shall maintain qualified and certified <br />personnel with good repute. <br />C. Application and use of this product shall be in <br />accordance with all instructions and precautions <br />stated in the Technical Data Sheet. The MSDS <br />and local regulations should be followed during <br />handling, storage, applications and waste disposal. <br />1.4 Delivery, Storage and Handling <br />A. All materials shall be delivered in unopened and <br />original containers and fully identified with brand,</p> <p>B.</p> <p>C. <br />D.</p> <p>type, grade, class, batch numbers and all other <br />qualifying information. <br /> All the delivered materials shall be stored in its <br />original packaging and elevated from the ground <br />on pallets or shelves (avoid direct contact with the <br />floor) according to the valid TDS. <br /> All the necessary precautions shall be taken <br />to keep the product clean, dry and free from <br />damage. <br /> Shelf life is 24 months when stored according to <br />the above conditions and cool conditions above <br />+5 °C.</p> <p>1.5 Job Conditions <br />A. Environmental conditions: the material shall be <br />protected from rain.</p> <p>Part 2 – Product <br />2.1 Manufacturer <br /> AQUAFIN-CJ6 as manufactured by <br />SCHOMBURG GmbH & Co. KG conforms to all <br />requirements of this method statement <br />2.2 Materials <br />A. TPE (thermoplastic elastomer) <br />2.3 Performance Criteria <br />AQUAFIN-CJ6 has the following properties: <br />Basis: <br />TPE <br />Format: <br />quadratic and flexbile <br />Colour: <br />red <br />Density: <br />1.25 g / m³ <br />Hardness per Shore A in accordance <br />with DIN 53505: 37 <br />Thickness: 5 mm <br />Width: 20 mm <br />Start of swelling on <br />water contact: <br />approx. 6 hours</p> <p>1/2</p> <p>06/20</p> <p> Swelling capacity <br />(demin. Water) <br />approx. 50 % after 2 hours <br />approx. 460 % after 24 hours <br /> <br />approx. ≥ 700 % after 8 days <br />Expansive pressure: approx. 1.06 N/mm² <br />Water-impermeability <br />after installation <br />(0.25 mm joint): <br />2 bar <br />Toxicity: <br />none <br />Reaction to fire in accordance <br />with EN 13501: normal inflammability <br />(construction class E) <br />Packaging: <br />rolls of 40 linear meters</p> <p>Part 3 – Execution <br />3.1 General <br />AQUAFIN-CJ6 is used as a construction joint waterstop <br />in concrete construction. <br />3.2 Application: <br />Substrate preparation: <br />The substrate must be load-bearing, mostly flat and have <br />a closed surface texture. It must be free from gravel <br />pockets, cavities, gaping cracks, dust and be free from <br />adhesion inhibiting substances. Laitance layers are to <br />be removed, mechanically abraded (sand blasted) as <br />necessary. During the application of AQUAFIN-CJ6 the <br />substrate may be matt damp. The formation of puddles is <br />not permitted.</p> <p>begin the concreting process for at least 8 hours after <br />bonding. Alternatively, AQUAFIN-CJ6 can also be <br />fastened with steel nails (min. 5 nails/m). When doing <br />so, it is necessary to ensure substrate contact pressure <br />covering the whole area. Avoid looping or hollow layers. <br />Waterstop connections can be made by overlapping by <br />5 cm or by butt jointing. The waterstops must be placed <br />tightly together to prevent gaps. Butt jointed waterstops <br />must be covered by a separate section of waterstop with <br />a 3 cm overlap to both sections. <br />Notes: <br />• It is essential to store the waterstop dry. <br />• Waterstops must lie flat and planar on the concrete. <br />There must be no contaminants beneath the waterstop. <br />• Protect the waterstop from moisture until the concrete is <br />poured. <br />• Before commencing the concreting process visually <br />inspect the waterstop. Heavily swollen waterstop tape <br />is unsuitable and must be removed. <br />• Waterstops are not suitable for movement joints. <br />• Follow current relevant regulations and data sheets</p> <p>Product application: <br />It is essential that there is at least > 8 cm coverage <br />of concrete from the side exposed to water. Bond <br />AQUAFIN-CJ6 with a mounting adhesive suitable for <br />waterstops – e.g. AQUAFIN-CA. <br />Completely cover the prepared substrate with the <br />mounting adhesive and press the AQUAFIN-CJ6 into <br />the adhesive until it oozes out from beneath. Do not <br />The rights of the buyer with regard to the quality of our materials are based on our terms and conditions of sale and delivery. Our technical advice team will be happy to advise you in the case <br />of requirements that exceed the scope of the application described here. In order to be binding, a legally binding written confirmation is required. The product description does not release the <br />user from a duty of care. Lay a test area in the event of uncertainty. This version becomes invalid in the event of a new version being issued. <br />2/2</p> <p>SE/KK 06/20</p> <p>SCHOMBURG GmbH & Co. KG <br />Aquafinstrasse 2–8 <br />D-32760 Detmold (Germany) <br />phone + 49-5231- 953-00 <br />fax <br />+ 49-5231- 953-108 <br />email export@schomburg.de <br />www.schomburg.com</p> <p>Method Statement</p> <p>AQUAFIN®-CJ5 <br />Crystalline coated joint sheet</p> <p>Scope <br />This method statement covers crystalline coated joint <br />sheets for construction joints</p> <p>Part 1 – General <br />This section covers materials, labour, tools and equipment <br />for installation and application of crystalline coated joint <br />sheets</p> <p>B.</p> <p>C. <br />D.</p> <p>1.1 Standards <br />1.2 Submittal <br />A. Submit two copies of Technical Data Sheet <br />containing all the instructions for use and installation <br />(TDS) and Material Safety Data Sheet (MSDS). <br />B. <br /> Submit a list of SCHOMBURG GmbH & Co. KG or <br />your local SCHOMBURG/AQUAFIN approved <br />applicators (Please ask for an applicator list). <br />1.3 Quality Assurance <br />A. Manufacturer Qualifications <br />The manufacturer shall certify that the specified <br />product is valid and suitable for use and <br />application as mentioned in the TDS. <br />B. Applicator Qualifications <br />Applicator shall be qualified in the field of concrete <br />protection and repair with successful records. <br />Applicator shall maintain qualified and certified <br />personnel with good repute. <br />C. Application and use of this product shall be in <br />accordance with all instructions and precautions <br />stated in the Technical Data Sheet. The MSDS <br />and local regulations should be followed during <br />handling, storage, applications and waste disposal. <br />1.4 Delivery, Storage and Handling <br />A. All materials shall be delivered in unopened and <br />original containers and fully identified with brand, <br />type, grade, class, batch numbers and all other</p> <p>qualifying information. <br /> All the delivered materials shall be stored in its <br />original packaging and elevated from the ground <br />on pallets or shelves (avoid direct contact with the <br />floor) according to the valid TDS. <br /> All the necessary precautions shall be taken <br />to keep the product clean, dry and free from <br />damage. <br /> Shelf life is 24 months when stored according to <br />the above conditions and cool conditions above <br />0 °C.</p> <p>Part 2 – Product <br />2.1 Manufacturer <br /> AQUAFIN-CJ5 as manufactured by <br />SCHOMBURG GmbH & Co. KG conforms to all <br />requirements of this method statement. <br />2.2 Materials <br />A. Sheet metal <br />B. <br />Crystalline, mineralic coatings <br />2.3 Performance Criteria <br />AQUAFIN-CJ5 has the following properties: <br />Basis: <br />sheet metal <br />Shape: <br />rectangular and flexible <br />Colour: <br />black / grey <br />Dimensions: <br />1.25 × 2,000 × 150 mm <br />Water-impermeability <br /> after installation <br />(0.25mm joint) <br />5 bar <br />Toxicity: <br />none <br />Reaction to fire in accordance <br />with EN 13501 normal inflammability <br />(construction class E) <br />Packaging: 100 m (50 sheets) per wooden <br />crate, with 50 holding clamps</p> <p>1/2</p> <p>06/20</p> <p>Part 3 – Execution <br />3.1 General <br />AQUAFIN-CJ5 is used as a crystalline coated joint strip <br />for construction joints. <br />3.2 Application: <br />The joint sheet should be installed centrally in the joint <br />before concreting and fastened in place with the help of <br />the omega clamp or retaining clips. In doing so, concrete <br />inclusion of > 3 cm must be guaranteed. Joints are to be <br />overlapped with > 5 cm for 2 bars pressure or > 20 cm <br />for up to 5 bar pressure. In the case of rounded parts <br />and corner constructions, simply bend the AQUAFIN-CJ5 <br />into the corresponding shape. <br />Notes: <br />• The joint sheets should be stored dry as a matter of <br />principle. <br />• The joint sheets must be arranged perpendicular to the <br />construction joints. <br />• The joint sheets must be subjected to a visual check <br />before concreting <br />• Joint sheets are not suitable for movement joints. <br />• The current applicable regulations and datasheets are <br />to be observed!</p> <p>The rights of the buyer with regard to the quality of our materials are based on our terms and conditions of sale and delivery. Our technical advice team will be happy to advise you in the case <br />of requirements that exceed the scope of the application described here. In order to be binding, a legally binding written confirmation is required. The product description does not release the <br />user from a duty of care. Lay a test area in the event of uncertainty. This version becomes invalid in the event of a new version being issued. <br />2/2</p> <p>SE/KK 06/20</p> <p>SCHOMBURG GmbH & Co. KG <br />Aquafinstrasse 2–8 <br />D-32760 Detmold (Germany) <br />phone + 49-5231- 953- 00 <br />fax <br />+ 49-5231- 953-108 <br />email export@schomburg.de <br />www.schomburg.com</p> <p>Method Statement</p> <p>AQUAFIN®-CJ4 <br />Bentonite waterstop with patent. Protective coating against rain.</p> <p>Scope <br />This method statement covers bentonite waterstops <br />construction joints.</p> <p>Part 1 – General <br />This section covers materials, labour, tools and equipment <br />for installation and application of bentonite waterstops <br />1.1 Standards <br />1.2 Submittal <br />A. Submit two copies of Technical Data Sheet <br />containing all the instructions for use and installation <br />(TDS) and Material Safety Data Sheet (MSDS). <br />B. Submit a list of SCHOMBURG GmbH & Co. KG <br />or your local SCHOMBURG/AQUAFIN <br />approved applicators (Please ask for an applicator <br />list). <br />1.3 Quality Assurance <br />A. Manufacturer Qualifications <br />The manufacturer shall certify that the specified <br />product is valid and suitable for use and <br />application as mentioned in the TDS. <br />B. Applicator Qualifications <br />Applicator shall be qualified in the field of concrete <br />protection and repair with successful records. <br />Applicator shall maintain qualified and certified <br />personnel with good repute. <br />C. Application and use of this product shall be in <br />accordance with all instructions and precautions <br />stated in the Technical Data Sheet. The MSDS <br />and local regulations should be followed during <br />handling, storage, applications and waste disposal. <br />1.4 Delivery, Storage and Handling <br />A. All materials shall be delivered in unopened and <br />original containers and fully identified with brand, <br />type, grade, class, batch numbers and all other</p> <p>qualifying information. <br />B. All the delivered materials shall be stored in its <br />original packaging and elevated from the ground <br />on pallets or shelves (avoid direct contact with the <br />floor) according to the valid TDS. <br />C. All the necessary precautions shall be taken <br />to keep the product clean, dry and free from <br />damage. <br />D. Shelf life is 5 years when stored according to the <br />above conditions and cool conditions abov +5 °C.</p> <p>Part 2 – Product <br />2.1 Manufacturer <br /> AQUAFIN-CJ4 as manufactured by <br />SCHOMBURG GmbH & Co. KG conforms to all <br />requirements of this method statement.. <br />2.2 Materials <br />A. Sodium bentonite embedded in a matrix of high <br />molecular weight poly-isobutylene rubber as well <br />as special filters and additives. <br />2.3 Performance Criteria <br />AQUAFIN-CJ4 has the following properties: <br />Basis: <br />bentonite <br />Format: <br />square-edged and flexbile <br />Colour: <br />black / grey <br />Density: <br />730 g / m <br />Thickness: <br />18 mm <br />Width: <br />24 mm <br /> Swelling capacity <br />(demin. water): <br />approx. ≥ 500 % after 8 days <br />Water-impermeability <br />after installation <br />(0.25 mm joint): 2 bar <br />Toxicity: <br />none <br />Packaging: rolls of 5 linear meters; 4 rolls to <br />a box</p> <p>1/2</p> <p>06/20</p> <p>Part 3 – Execution <br />3.1 General <br />AQUAFIN-CJ4 is used as a construction joint waterstop <br />in concrete construction. <br />3.2 Application: <br />Substrate preparation: <br />The substrate must be load-bearing, mostly flat and have <br />a closed surface texture. It must be free from gravel <br />pockets, cavities, gaping cracks, dust and be free from <br />adhesion inhibiting substances. Laitance layers are to <br />be removed, mechanically abraded (sand blasted) as <br />necessary. During the application of AQUAFIN-CJ4 the <br />substrate may be matt damp. The formation of puddles is <br />not permitted.</p> <p>• Protect the waterstop from moisture until the concrete is <br />poured. <br />• Before commencing the concreting process visually <br />inspect the waterstop. Heavily swollen waterstop tape <br />is unsuitable and must be removed. <br />• Waterstops are not suitable for movement joints. <br />• Follow current relevant regulations and data sheets.</p> <p>Product application: <br />It is essential that there is at least > 8 cm coverage <br />of concrete from the side exposed to water. Bond <br />AQUAFIN-CJ4 with a mounting adhesive suitable for <br />waterstops – e.g. AQUAFIN-CA. <br />Completely cover the prepared substrate with the <br />mounting adhesive and press the AQUAFIN-CJ4 into <br />the adhesive until it oozes out from beneath. Do not <br />begin the concreting process for at least 8 hours after <br />bonding. Alternatively, AQUAFIN-CJ4 can also be <br />fastened with steel nails (min. 5 nails/m). When doing <br />so, it is necessary to ensure substrate contact pressure <br />covering the whole area. Avoid looping or hollow layers. <br />Waterstop connections can be made by overlapping by <br />5 cm or by butt jointing. The waterstops must be placed <br />tightly together to prevent gaps. Butt jointed waterstops <br />must be covered by a separate section of waterstop with <br />a 3 cm overlap to both sections. <br />Notes: <br />• It is essential to store the waterstop dry. <br />• Waterstops must lie flat and planar on the concrete. <br />There must be no contaminants beneath the waterstop.</p> <p>The rights of the buyer with regard to the quality of our materials are based on our terms and conditions of sale and delivery. Our technical advice team will be happy to advise you in the case <br />of requirements that exceed the scope of the application described here. In order to be binding, a legally binding written confirmation is required. The product description does not release the <br />user from a duty of care. Lay a test area in the event of uncertainty. This version becomes invalid in the event of a new version being issued. <br />2/2</p> <p>SE/KK 06/20</p> <p>SCHOMBURG GmbH & Co. KG <br />Aquafinstrasse 2–8 <br />D-32760 Detmold (Germany) <br />phone + 49-5231- 953- 00 <br />fax <br />+ 49-5231- 953-108 <br />email export@schomburg.de <br />www.schomburg.com</p> <p>Method Statement</p> <p>AQUAFIN®-CJ3 <br />Bentonite waterstop with patent</p> <p>Scope <br />This method statement covers bentonite waterstops <br />construction joints.</p> <p>Part 1 – General <br />This section covers materials, labour, tools and equipment <br />for installation and application of bentonite waterstops. <br />1.1 Standards <br />1.2 Submittal <br />A. Submit two copies of Technical Data Sheet <br />containing all the instructions for use and installation <br />(TDS) and Material Safety Data Sheet (MSDS). <br />B. Submit a list of SCHOMBURG GmbH & Co. KG <br />or your local SCHOMBURG/AQUAFIN <br />approved applicators (Please ask for an applicator <br />list). <br />1.3 Quality Assurance <br />A. Manufacturer Qualifications <br />The manufacturer shall certify that the specified <br />product is valid and suitable for use and <br />application as mentioned in the TDS. <br />B. Applicator Qualifications <br />Applicator shall be qualified in the field of concrete <br />protection and repair with successful records. <br />Applicator shall maintain qualified and certified <br />personnel with good repute. <br />C. Application and use of this product shall be in <br />accordance with all instructions and precautions <br />stated in the Technical Data Sheet. The MSDS <br />and local regulations should be followed during <br />handling, storage, applications and waste disposal. <br />1.4 Delivery, Storage and Handling <br />A. All materials shall be delivered in unopened and <br />original containers and fully identified with brand, <br />type, grade, class, batch numbers and all other</p> <p>qualifying information. <br />B. All the delivered materials shall be stored in its <br />original packaging and elevated from the ground <br />on pallets or shelves (avoid direct contact with the <br />floor) according to the valid TDS. <br />C. All the necessary precautions shall be taken <br />to keep the product clean, dry and free from <br />damage. <br />D. Shelf life is 5 years when stored according to <br />the above conditions and cool conditions above <br />+5 °C. <br />1.5 Job Conditions <br />A. Environmental conditions: the material shall be <br />protected from rain.</p> <p>Part 2 – Product <br />2.1 Manufacturer <br /> AQUAFIN-CJ3 as manufactured by <br />SCHOMBURG GmbH and Co. KG conforms to <br />all requirements of this method statement. <br />2.2 Materials <br />A. Sodium bentonite embedded in a matrix of high <br />molecular weight poly-isobutylene rubber as well <br />as special filters and additives <br />2.3 Performance Criteria <br />AQUAFIN-CJ3 has the following properties: <br />Basis: <br />bentonite <br />Format: <br />square-edged and flexbile <br />Colour: <br />black / grey <br />Density: <br />730 g / m <br />Thickness: <br />18 mm <br />Width: <br />24 mm <br /> Swelling capacity <br />(demin. Water): approx. ≥ 500 % after 8 days <br /> </p> <p>1/2</p> <p>06/20</p> <p>Water-impermeability <br />after installation <br />(0.25mm joint): <br />2 bar <br />Toxicity: <br />none <br />Packaging: rolls of 5 linear meters; <br />4 rolls to a box</p> <p>Part 3 – Execution <br />3.1 General <br />AQUAFIN-CJ3 is used as a construction joint waterstop <br />in concrete construction. <br />3.2 Application: <br />Substrate preparation: <br />The substrate must be load-bearing, mostly flat and have <br />a closed surface texture. It must be free from gravel <br />pockets, cavities, gaping cracks, dust and be free from <br />adhesion inhibiting substances. Laitance layers are to <br />be removed, mechanically abraded (sand blasted) as <br />necessary. During the application of AQUAFIN-CJ3 the <br />substrate may be matt damp. The formation of puddles is <br />not permitted.</p> <p>5 cm or by butt jointing. The waterstops must be placed <br />tightly together to prevent gaps. Butt jointed waterstops <br />must be covered by a separate section of waterstop with <br />a 3 cm overlap to both sections. <br />Notes: <br />• It is essential to store the waterstop dry. <br />• Waterstops must lie flat and planar on the concrete. <br />There must be no contaminants beneath the waterstop. <br />• Protect the waterstop from moisture until the concrete is <br />poured. <br />• Before commencing the concreting process visually <br />inspect the waterstop. Heavily swollen waterstop tape <br />is unsuitable and must be removed. <br />• Waterstops are not suitable for movement joints. <br />• Follow current relevant regulations and data sheets.</p> <p>Product application: <br />It is essential that there is at least > 8 cm coverage <br />of concrete from the side exposed to water. Bond <br />AQUAFIN-CJ3 with a mounting adhesive suitable for <br />waterstops – e.g. AQUAFIN-CA. <br />Completely cover the prepared substrate with the <br />mounting adhesive and press the AQUAFIN-CJ3 into <br />the adhesive until it oozes out from beneath. Do not <br />begin the concreting process for at least 8 hours after <br />bonding. Alternatively, AQUAFIN-CJ3 can also be <br />fastened with steel nails (min. 5 nails/m). When doing <br />so, it is necessary to ensure substrate contact pressure <br />covering the whole area. Avoid looping or hollow layers. <br />Waterstop connections can be made by overlapping by</p> <p>The rights of the buyer with regard to the quality of our materials are based on our terms and conditions of sale and delivery. Our technical advice team will be happy to advise you in the case <br />of requirements that exceed the scope of the application described here. In order to be binding, a legally binding written confirmation is required. The product description does not release the <br />user from a duty of care. Lay a test area in the event of uncertainty. This version becomes invalid in the event of a new version being issued. <br />2/2</p> <p>SE/KK 06/20</p> <p>Project:</p> <p>Page 1</p> <p>www.heinze.de/at-manager</p> <p>LV name: SCHOMBURG <br />Table of contents</p> <p>1</p> <p>Building Waterproofing</p> <p>2</p> <p>1.1</p> <p>Waterproofing of building components made from concrete (waterproof concrete)</p> <p>2</p> <p>1.1.1</p> <p>Manufacture of waterproof concrete</p> <p>2</p> <p>1.1.1.1</p> <p>Internal concrete sealing with crystalline concrete admixtures</p> <p>2</p> <p>1.1.2</p> <p>Injections of construction joints</p> <p>4</p> <p>1.1.2.1</p> <p>Construction joint sealing with injection hose (AQUAFIN CJ1)</p> <p>4</p> <p>1.1.3</p> <p>Swelling joint tape</p> <p>6</p> <p>1.1.3.1</p> <p>Construction joint sealing with swelling joint tape made from thermoplastic (AQUAFIN-CJ6)</p> <p>6</p> <p>1.1.3.2</p> <p>Construction joint sealing with swelling joint tape made from bentonite with rain protection <br />(AQUAFIN-CJ4)</p> <p>9</p> <p>1.1.3.3</p> <p>Construction joint sealing with swelling joint tape made from bentonite (AQUAFIN-CJ3)</p> <p>12</p> <p>1.1.4</p> <p>Joint sheets</p> <p>15</p> <p>1.1.4.1</p> <p>Construction joint sealing with crystalline-coated joint sheet (AQUAFIN-CJ5)</p> <p>15</p> <p>1.1.5</p> <p>Waterproofing of pipe penetrations</p> <p>18</p> <p>1.1.5.1</p> <p>Waterproofing of pipe penetrations with swelling joint tape made from thermoplastic <br />(AQUAFIN-CJ6)</p> <p>18</p> <p>Compilation</p> <p>19</p> <p>Project:</p> <p>Page 2</p> <p>www.heinze.de/at-manager</p> <p>LV name: SCHOMBURG <br />OZ</p> <p>Quantity Unit</p> <p>Unit price EURO Total amount EURO</p> <p>1</p> <p>Building Waterproofing</p> <p>1.1</p> <p>Waterproofing of building components made from concrete <br />(waterproof concrete)</p> <p>1.1.1</p> <p>Manufacture of waterproof concrete</p> <p>1.1.1.1</p> <p>Internal concrete sealing with crystalline concrete admixtures <br />The bidder must obtain information about the situation on-site before <br />submitting the offer. Claims arising from lack of knowledge about the <br />situation will not be accepted. <br />Crystalline concrete admixture BETOCRETE <br />To support the self-healing properties of waterproof concrete, a so-called <br />crystalline concrete admixture can be used. The crystalline substance, which <br />is distributed across the entire waterproof construction, reacts upon contact <br />with water and fills in fine cracks and capillary pores with nano-crystals. <br />The concrete must comply with all of the structural planning requirements <br />and be ordered in accordance to the properties. For this purpose, <br />preliminary testing must be carried out with the crystalline concrete <br />admixture in the concrete plant. <br />The crystalline concrete admixture BETOCRETE verifiably fulfils the <br />properties as: <br />1. BETOCRETE-CL170-P: Plasticizer in accordance with EN-934-2, <br />table 2. <br />2. BETOCRETE-CL210-WP: Liquid waterproofer in <br />accordance with EN-934-2, table 9. <br />3. BETOCRETE-CP360-WP: Powdered waterproofer in accordance <br />with EN-934-2, table 9. <br />4. BETOCRETE-CP350-CI: Powdered crystalline admixture with <br />added corrosion inhibitor <br />The technical documentation of SCHOMBURG GmbH, <br />Aquafinstr. 2-8, 32760 Detmold, Tel. +49-5231-953-00 <br />must be observed.</p> <p>1.1.1.1.010</p> <p>Concrete admixture: Plasticizer <br />Liquid concrete admixtures for crystalline waterproofing, in this case as <br />plasticizer in accordance with EN-934-2, table 2. <br />Reduction of the water penetration under pressure of at least 8mm according <br />to EN 12390-8. <br />SCHOMBURG reference product <br />BETOCRETE-CL170-P <br />Material requirements: to be determined depending on the recipe <br />(The quantity relates to the mixture of the concrete and the concrete admixture.) <br />1 m³</p> <p>......................</p> <p>..............................</p> <p>Project:</p> <p>Page 3</p> <p>www.heinze.de/at-manager</p> <p>LV name: SCHOMBURG <br />OZ</p> <p>Quantity Unit</p> <p>1.1.1.1.020</p> <p>Concrete admixture: Waterproofer (liquid)</p> <p>Unit price EURO Total amount EURO</p> <p>Liquid concrete admixtures for crystalline waterproofing, in this case as a <br />waterproofer in accordance with EN-934-2, table 9. <br />Reduction of the water penetration under pressure of at least 8mm according <br />to EN 12390-8. <br />SCHOMBURG reference product <br />BETOCRETE-CL210-WP <br />Material requirements: to be determined depending on the recipe <br />(The quantity relates to the mixture of the concrete and the concrete admixture.) <br />1 m³ <br />1.1.1.1.030</p> <p>......................</p> <p>..............................</p> <p>Concrete admixture: Waterproofer (powdered) <br />Powdered concrete admixtures for crystalline waterproofing, in this case as a <br />waterproofer in accordance with EN 934-2, table 9. <br />Reduction of the water penetration under pressure of at least 8mm according <br />to EN 12390-8. <br />SCHOMBURG reference product <br />BETOCRETE-CP360-WP <br />Material requirements: to be determined depending on the recipe <br />(The quantity relates to the mixture of the concrete and the concrete admixture.) <br />1 m³</p> <p>1.1.1.1.040</p> <p>......................</p> <p>..............................</p> <p>Concrete admixture: Crystalline effect with corrosion inhibitor (powdered) <br />Powdered concrete admixtures for crystalline waterproofing including <br />additional corrosion inhibtor. <br />Reduction of the water penetration under pressure of at least 5mm according <br />to EN 12390-8. <br />SCHOMBURG reference product <br />BETOCRETE-CP350-CI <br />Material requirements: to be determined depending on the recipe <br />(The quantity relates to the mixture of the concrete and the concrete admixture.) <br />1 m³</p> <p>......................</p> <p>..............................</p> <p>Total 1.1.1.1</p> <p>Internal concrete sealing with crystalline concrete admixtures</p> <p>..............................</p> <p>Total 1.1.1</p> <p>Manufacture of waterproof concrete</p> <p>..............................</p> <p>Project:</p> <p>Page 4</p> <p>www.heinze.de/at-manager</p> <p>LV name: SCHOMBURG <br />OZ</p> <p>Quantity Unit</p> <p>Unit price EURO Total amount EURO</p> <p>1.1.2</p> <p>Injections of construction joints</p> <p>1.1.2.1</p> <p>Construction joint sealing with injection hose (AQUAFIN CJ1) <br />The bidder must obtain information about the situation on-site before <br />submitting the offer. Claims arising from lack of knowledge about the <br />situation will not be accepted. <br />Injection hose for waterproofing of construction joints in <br />concrete AQUAFIN-CJ1 <br />The injection hose is used for the waterproofing of building joints which are <br />subject to continuous or occasional exposure to the effects of groundwater, <br />hillside water and/or surface water. The structurally required construction <br />joints can be force-fitting and water pressure-tight. The waterproofing <br />injection of the AQUAFIN-CJ1 injection hose in construction joints in the <br />system with the elastic polyurethane injection resin AQUAFIN-P4 has been <br />generally approved by MPA Braunschweig (P-5032/9455). <br />The technical documentation of SCHOMBURG GmbH, <br />Aquafinstr. 2-8, 32760 Detmold, Tel. +49-5231-953-00 <br />must be observed.</p> <p>1.1.2.1.010</p> <p>Preparation of the substrates <br />Manufacture of a load-bearing, mostly level substrate with a sealed surface, <br />free of gravel pockets, cavities, gaping cracks, dust and adhesion inhibiting <br />substances. Laitance layers must be removed and cleared away <br />mechanically. <br />Chosen procedure: <br />1m</p> <p>......................</p> <p>..............................</p> <p>Project:</p> <p>Page 5</p> <p>www.heinze.de/at-manager</p> <p>LV name: SCHOMBURG <br />OZ</p> <p>Quantity Unit</p> <p>1.1.2.1.020</p> <p>Injection hose laying</p> <p>Unit price EURO Total amount EURO</p> <p>Supply, assembly and laying of an injection hose for one-off grouting for <br />subsequent injections with elastic PU injection resin into damp or waterretaining construction joints in accordance with the manufacturer's <br />specifications. Laying takes place with a concrete covering of at least 8 <br />cm to the water-conducting side with a maximum hose length of 10 m. <br />Attachment and protection from floating takes place on the level substrate <br />using fastening clips at intervals of max. 15 cm. Subsequent injection <br />hoses are laid with an overlap of at least 10 cm. The currently valid <br />building approval test certificate must be presented before the start of <br />injection work. <br />SCHOMBURG reference products: <br />AQUAFIN-CJ1 <br />Material requirement: approx. 1.00 m/m <br />1m <br />1.1.2.1.030</p> <p>......................</p> <p>..............................</p> <p>Grouting of the injection hose <br />Supply and application of an elastic PU injection resin in accordance with the <br />manufacturer's specifications. Injection hose (concrete age at least 28 days) <br />using commercially available injection pumps for polyurethane resins using <br />the high-pressure waterproofing grouting procedure, including documentation <br />of consumption. The injection hose must be re-injected at least once during <br />the processing time of approx. 30 mins at +18 °C. <br />SCHOMBURG reference products: <br />AQUAFIN-P4 <br />Material requirement: approx. 1.0 kg/running meter <br />1m</p> <p>1.1.2.1.040</p> <p>......................</p> <p>..............................</p> <p>Allowance for additional material consumption <br />Allowance for pre-positioning “Grouting the injection hose” for additional <br />material consumption of PU injection resin. <br />1 kg</p> <p>......................</p> <p>..............................</p> <p>Total 1.1.2.1</p> <p>Construction joint sealing with injection hose (AQUAFIN CJ1)</p> <p>..............................</p> <p>Total 1.1.2</p> <p>Injections of construction joints</p> <p>..............................</p> <p>Project:</p> <p>Page 6</p> <p>www.heinze.de/at-manager</p> <p>LV name: SCHOMBURG <br />OZ</p> <p>Quantity Unit</p> <p>Unit price EURO Total amount EURO</p> <p>1.1.3</p> <p>Swelling joint tape</p> <p>1.1.3.1</p> <p>Construction joint sealing with swelling joint tape made from <br />thermoplastic (AQUAFIN-CJ6) <br />The bidder must obtain information about the situation on-site before <br />submitting the offer. Claims arising from lack of knowledge about the <br />situation will not be accepted. <br />Swelling joint tape made from thermoplastic AQUAFIN-CJ6 <br />AQUAFIN-CJ6 is used for interior waterproofing of construction joints in <br />concrete structures which are subject to continuous or occasional exposure <br />to groundwater, hillside water and/or surface water. AQUAFIN-CJ6 is <br />suitable for areas with fluctuating water levels. The construction joints can <br />be made watertight at an installation depth of up to 8 m. <br />The technical documentation of SCHOMBURG GmbH, <br />Aquafinstr. 2-8, 32760 Detmold, Tel. +49-5231-953-00 <br />must be observed.</p> <p>1.1.3.1.010</p> <p>Preparation of the substrates <br />Manufacture of a load-bearing, mostly level substrate with a sealed surface, <br />free of gravel pockets, cavities, gaping cracks, dust and adhesion inhibiting <br />substances. Laitance layers must be removed and cleared away <br />mechanically. <br />Chosen procedure: <br />1m</p> <p>......................</p> <p>..............................</p> <p>Project:</p> <p>www.heinze.de/at-manager</p> <p>LV name:</p> <p>SCHOMBURG</p> <p>OZ</p> <p>Quantity Unit</p> <p>1.1.3.1.020</p> <p>Application of the thermoplastic swelling tape</p> <p>Page 7</p> <p>Unit price EURO Total amount EURO</p> <p>Supply and insertion of a thermoplastic swelling joint tape in a suitable <br />assembly adhesive. The assembly adhesive is generously applied to the <br />prepared substrate. The swelling joint tape must be pressed into the <br />adhesive within the open time until it oozes out on the underside. The <br />concreting process can take place no sooner than 8 hours after adhesion. <br />The swelling joint tape must be arranged so that there is a concrete covering <br />of at least 8 cm to the water-conducting side. Alternatively, swelling joint <br />tape can also be secured using steel nails (min. 5 nails per metre). When <br />doing so, it must be ensured that it is pressed onto the subsurface over the <br />entire area. Avoid loop formation and cavities. <br />The swelling behaviour is approx. 460% within 24h of application - in <br />demineralised water. <br />The allowed maximum water pressure is 2.0 bars. <br />SCHOMBURG reference products: <br />AQUAFIN-CJ6 <br />Material consumption: 1.0 m/m <br />1m <br />1.1.3.1.030</p> <p>......................</p> <p>..............................</p> <p>Allowance for application of swelling tape <br />Swelling joint tape can be applied with an overlap of at least 50 mm or buttjointed. Butt-jointed swelling tape connections must be secured with a <br />separate swelling tape with an overlap of at least 30 mm. <br />SCHOMBURG reference products: <br />AQUAFIN-CJ6 <br />Material requirement: depending on application <br />1 pcs</p> <p>1.1.3.1.040</p> <p>......................</p> <p>..............................</p> <p>Supplying construction adhesive for fastening the swelling joint tape <br />Supply of construction adhesive for fastening the swelling joint tape. This <br />can also be used on a wet substrate. The assembly adhesive must fulfil the <br />requirements of EMICODE EC1+. <br />SCHOMBURG reference products: <br />AQUAFIN-CA <br />Material requirement: approx. 1 cartridge (pcs.) per 8 linear metres. <br />1 pcs</p> <p>......................</p> <p>..............................</p> <p>Page 8</p> <p>Project:</p> <p>www.heinze.de/at-manager</p> <p>LV name:</p> <p>SCHOMBURG</p> <p>OZ</p> <p>Quantity Unit</p> <p>Total 1.1.3.1</p> <p>Construction joint sealing with swelling joint tape <br />made from thermoplastic (AQUAFIN-CJ6)</p> <p>Unit price EURO Total amount EURO <br />..............................</p> <p>Page 9</p> <p>Project:</p> <p>www.heinze.de/at-manager</p> <p>LV name:</p> <p>SCHOMBURG</p> <p>OZ</p> <p>Quantity Unit</p> <p>1.1.3.2</p> <p>Construction joint sealing with swelling joint tape made from <br />bentonite with rain protection (AQUAFIN-CJ4)</p> <p>Unit price EURO Total amount EURO</p> <p>The bidder must obtain information about the situation on-site before <br />submitting the offer. Claims arising from lack of knowledge about the <br />situation will not be accepted. <br />Swelling joint tape made from bentonite with rain protection <br />AQUAFIN-CJ4 AQUAFIN-CJ4 is used for the internal waterproofing of <br />construction joints in concrete structures which are subject to continuous <br />or occasional exposure to groundwater, hillside water and/or surface <br />water. Use in water exchange zones is possible. AQUAFIN-CJ4 is <br />characterised by a strong, quick and reliable swelling behaviour whereby <br />the protective coating applied in the factory effectively delays premature <br />swelling caused by rain. <br />The technical documentation of SCHOMBURG GmbH, <br />Aquafinstr. 2-8, 32760 Detmold, Tel. +49-5231-953-00 <br />must be observed. <br />1.1.3.2.010</p> <p>Preparation of the substrates <br />Manufacture of a load-bearing, mostly level substrate with a sealed surface, <br />free of gravel pockets, cavities, gaping cracks, dust and adhesion inhibiting <br />substances. Laitance layers must be removed and cleared away <br />mechanically. <br />Chosen procedure: <br />1m</p> <p>......................</p> <p>..............................</p> <p>Page 10</p> <p>Project:</p> <p>www.heinze.de/at-manager</p> <p>LV name:</p> <p>SCHOMBURG</p> <p>OZ</p> <p>Quantity Unit</p> <p>1.1.3.2.020</p> <p>Application of bentonite swelling tape with rain protection</p> <p>Unit price EURO Total amount EURO</p> <p>Supply and insertion of a bentonite swelling joint tape in a suitable assembly <br />adhesive. The assembly adhesive is generously applied to the prepared <br />substrate. The swelling joint tape must be pressed into the adhesive within <br />the open time until it oozes out on the underside. The concreting process <br />can take place no sooner than 8 hours after adhesion. The swelling joint <br />tape must be arranged so that there is a concrete covering of at least 8 cm <br />to the water-conducting side. Alternatively, swelling joint tape can also be <br />secured using steel nails (min. 5 nails per metre). When doing so, it must be <br />ensured that it is pressed onto the subsurface over the entire area. <br />Avoid loop formation and cavities. <br />Premature swelling is prevented by the rain protection coating for up to 3 <br />days. The swelling behaviour is approx. 500% within 8 days of application in demineralised water. <br />The allowed maximum water pressure is 2.0 bars. <br />SCHOMBURG reference products: <br />AQUAFIN-CJ4 <br />Material consumption: 1.0 m/m <br />1m <br />1.1.3.2.030</p> <p>......................</p> <p>..............................</p> <p>Allowance for application of swelling tape <br />Swelling joint tape can be applied with an overlap of at least 50 mm or buttjointed. Butt-jointed swelling tape connections must be secured with a <br />separate swelling tape with an overlap of at least 30 mm. <br />SCHOMBURG reference products: <br />AQUAFIN-CJ4 <br />Material requirement: depending on application <br />1 pcs</p> <p>1.1.3.2.040</p> <p>......................</p> <p>..............................</p> <p>Supplying construction adhesive for fastening the swelling joint tape <br />Supply of construction adhesive for fastening the swelling joint tape. This <br />can also be used on a wet substrate. The assembly adhesive must fulfil the <br />requirements of EMICODE EC1+. <br />SCHOMBURG reference products: <br />AQUAFIN-CA <br />Material requirement: approx. 1 cartridge (pcs.) per 8 linear metres. <br />1 pcs</p> <p>......................</p> <p>..............................</p> <p>Page 11</p> <p>Project:</p> <p>www.heinze.de/at-manager</p> <p>LV name:</p> <p>SCHOMBURG</p> <p>OZ</p> <p>Quantity Unit</p> <p>Total 1.1.3.2</p> <p>Construction joint sealing with swelling joint tape made from <br />bentonite with rain protection (AQUAFIN-CJ4)</p> <p>Unit price EURO Total amount EURO <br />..............................</p> <p>Page 12</p> <p>Project:</p> <p>www.heinze.de/at-manager</p> <p>LV name:</p> <p>SCHOMBURG</p> <p>OZ</p> <p>Quantity Unit</p> <p>1.1.3.3</p> <p>Construction joint sealing with swelling joint tape made <br />from bentonite (AQUAFIN-CJ3)</p> <p>Unit price EURO Total amount EURO</p> <p>The bidder must obtain information about the situation on-site before <br />submitting the offer. Claims arising from lack of knowledge about the <br />situation will not be accepted. <br />Swelling joint tape made from bentonite AQUAFIN-CJ 3 <br />AQUAFIN-CJ3 is used for the internal waterproofing of construction joints in <br />concrete structures which are subject to continuous or occasional exposure <br />to groundwater, hillside water and/or surface water. Use in water exchange <br />zones is straightforward. AQUAFIN-CJ3 is characterised by a strong, quick <br />and reliable swelling behaviour. <br />The technical documentation of SCHOMBURG GmbH, <br />Aquafinstr. 2-8, 32760 Detmold, Tel. +49-5231-953-00 <br />must be observed. <br />1.1.3.3.010</p> <p>Preparation of the substrates <br />Manufacture of a load-bearing, mostly level substrate with a sealed surface, <br />free of gravel pockets, cavities, gaping cracks, dust and adhesion inhibiting <br />substances. Laitance layers must be removed and cleared away <br />mechanically. <br />Chosen procedure: <br />1m</p> <p>......................</p> <p>..............................</p> <p>Project:</p> <p>www.heinze.de/at-manager</p> <p>LV name:</p> <p>SCHOMBURG</p> <p>OZ</p> <p>Quantity Unit</p> <p>1.1.3.3.020</p> <p>Application of the bentonite swelling tape</p> <p>Page 13</p> <p>Unit price EURO Total amount EURO</p> <p>Supply and insertion of a bentonite swelling joint tape in a suitable assembly <br />adhesive. The assembly adhesive is generously applied to the prepared <br />substrate. The swelling joint tape must be pressed into the adhesive within <br />the open time until it oozes out on the underside. The concreting process <br />can take place no sooner than 8 hours after adhesion. The swelling joint <br />tape must be arranged so that there is a concrete covering of at least 8 cm <br />to the water-conducting side. Alternatively, swelling joint tape can also be <br />secured using steel nails (min. 5 nails per metre). When doing so, it must be <br />ensured that it is pressed onto the subsurface over the entire area. <br />Avoid loop formation and cavities. <br />The swelling behaviour is approx. 500% within 8 days of application <br />in demineralised water. <br />The allowed maximum water pressure is 2.0 bars. <br />SCHOMBURG reference products: <br />AQUAFIN-CJ3 <br />Material consumption: 1.0 m/m <br />1m <br />1.1.3.3.030</p> <p>......................</p> <p>..............................</p> <p>Allowance for application of swelling tape <br />Swelling joint tape can be applied with an overlap of at least 50 mm or buttjointed. Butt-jointed swelling tape connections must be secured with a <br />separate swelling tape with an overlap of at least 30 mm. <br />SCHOMBURG reference products: <br />AQUAFIN-CJ3 <br />Material requirement: depending on application <br />1 pcs</p> <p>1.1.3.3.040</p> <p>......................</p> <p>..............................</p> <p>Supplying construction adhesive for fastening the swelling joint tape <br />Supply of construction adhesive for fastening the swelling joint tape. This <br />can also be used on a wet substrate. The assembly adhesive must fulfil the <br />requirements of EMICODE EC1+. <br />SCHOMBURG reference products: <br />AQUAFIN-CA <br />Material requirement: approx. 1 cartridge (pcs.) per 8 linear metres. <br />1 pcs</p> <p>......................</p> <p>..............................</p> <p>Page 14</p> <p>Project:</p> <p>www.heinze.de/at-manager</p> <p>LV name:</p> <p>SCHOMBURG</p> <p>OZ</p> <p>Quantity Unit</p> <p>Total 1.1.3.3</p> <p>Construction joint sealing with swelling joint tape made <br />from bentonite (AQUAFIN-CJ3)</p> <p>..............................</p> <p>Total 1.1.3</p> <p>Swelling join tapes in accordance with <br />DAfStb guideline “Watertight buildings made <br />from concrete”</p> <p>..............................</p> <p>Unit price EURO Total amount EURO</p> <p>Page 15</p> <p>Project:</p> <p>www.heinze.de/at-manager</p> <p>LV name:</p> <p>SCHOMBURG</p> <p>OZ</p> <p>Quantity Unit</p> <p>1.1.4</p> <p>Joint sheets</p> <p>1.1.4.1</p> <p>Construction joint sealing with crystalline coated joint sheet <br />(AQUAFIN-CJ5)</p> <p>Unit price EURO Total amount EURO</p> <p>The bidder must obtain information about the situation on-site before <br />submitting the offer. Claims arising from lack of knowledge about the <br />situation will not be accepted. <br />Crystalline-coated joint sheet AQUAFIN-CJ5 <br />AQUAFIN-CJ5 is used for interior waterproofing of construction joints in <br />concrete structures which are subject to continuous or occasional exposure <br />to groundwater, hillside water and/or surface water. <br />The joint sheet thus works both actively through a permanent bond with the <br />concrete as well as passively through circumference extension. Additionally, <br />a self-healing of the joint will take place thanks to the crystalline effect. <br />The technical documentation of SCHOMBURG GmbH, <br />Aquafinstr. 2-8, 32760 Detmold, Tel. +49-5231-953-00 <br />must be observed. <br />1.1.4.1.010</p> <p>Preparation of the substrates <br />Manufacture of a load-bearing, mostly level substrate with a sealed surface, <br />free of gravel pockets, cavities, gaping cracks, dust and adhesion inhibiting <br />substances. Laitance layers must be removed and cleared away <br />mechanically. <br />Chosen procedure: <br />1m</p> <p>......................</p> <p>..............................</p> <p>Project:</p> <p>www.heinze.de/at-manager</p> <p>LV name:</p> <p>SCHOMBURG</p> <p>OZ</p> <p>Quantity Unit</p> <p>1.1.4.1.020</p> <p>Application of the coated joint sheet</p> <p>Page 16</p> <p>Unit price EURO Total amount EURO</p> <p>Delivery and installation of the AQUAFIN-CJ5 joint sheet with crystalline <br />coating on both sides for sealing horizontal and vertical construction joints <br />from pressing water and non-pressing water as well as ground moisture. <br />Delivery including all of the required fasteners (mounting brackets, joint <br />clamps). <br />Installation takes place taking the manufacturer's specifications into <br />consideration in accordance with ETA-18/1106 and abP P-1202/099/19 <br />MPA-Braunschweig <br />With an overlap of ≥ 20 cm, the allowed maximum water pressure is 5.0 <br />bars. <br />SCHOMBURG reference products: <br />AQUAFIN-CJ5 <br />Joint sheet width: 150 mm <br />Joint sheet length: 2000 mm <br />Packaging: 100 m packed in a crate, with 50 retaining clamps incl. <br />Material requirements: approx. 1.05 m/m</p> <p>1m <br />1.1.4.1.030</p> <p>......................</p> <p>..............................</p> <p>Supplying retaining clamps as an allowance for overlapping <br />Supply of additional retaining clamps for crystalline coated joint sheets. The <br />retaining clamps are used to produce overlapping which prevents water <br />from running behind. <br />SCHOMBURG reference products: <br />Approx. 1 retaining clamp per 10 cm of sheet overlap. <br />(50 retaining clamps are included in the scope of delivery with per 100 m of <br />joint sheet.) <br />1 pcs</p> <p>1.1.4.1.040</p> <p>......................</p> <p>..............................</p> <p>Supplying omega clamps for securing in the reinforcement <br />Supply of omega clamps for crystalline coated joint sheets for binding and <br />securing the sheets in the reinforcement. <br />SCHOMBURG reference products: <br />Omega clamp <br />Material requirement: approx. 1 clamp per m of joint sheet <br />1 pcs</p> <p>......................</p> <p>..............................</p> <p>Page 17</p> <p>Project:</p> <p>www.heinze.de/at-manager</p> <p>LV name:</p> <p>SCHOMBURG</p> <p>OZ</p> <p>Quantity Unit</p> <p>Total 1.1.4.1</p> <p>Construction joint sealing with crystalline coated <br />joint sheet (AQUAFIN-CJ5)</p> <p>..............................</p> <p>Total 1.1.4</p> <p>Joint sheet</p> <p>..............................</p> <p>Unit price EURO Total amount EURO</p> <p>Project:</p> <p>Page 18</p> <p>www.heinze.de/at-manager</p> <p>LV name: SCHOMBURG <br />OZ</p> <p>Quantity Unit</p> <p>Unit price EURO Total amount EURO</p> <p>1.1.5</p> <p>Waterproofing of pipe penetrations</p> <p>1.1.5.1</p> <p>Waterproofing of pipe penetrations with swelling joint tape <br />made from thermoplastic (AQUAFIN-CJ6)</p> <p>1.1.5.1.010</p> <p>Preparation of the substrates <br />Manufacture of a load-bearing, mostly level substrate with a sealed surface, <br />free of gravel pockets, cavities, gaping cracks, dust and adhesion inhibiting <br />substances. Laitance layers must be removed and cleared away <br />mechanically. <br />Chosen procedure: <br />1 pcs</p> <p>1.1.5.1.020</p> <p>......................</p> <p>..............................</p> <p>Sealing of intersections with thermoplastic swelling joint <br />tape <br />Supply and insertion of a thermoplastic swelling jointing tape into a suitable <br />assembly adhesive on the intersection. The assembly adhesive is <br />generously applied to the prepared substrate. The swelling joint tape must <br />be pressed into the adhesive within the open time until it oozes out on the <br />underside. The concreting process can take place no sooner than 8 hours <br />after adhesion. The swelling joint tape must be arranged so that there is a <br />concrete covering of at least 8 cm to the water-conducting side. When doing <br />so, it must be ensured that it is pressed onto the subsurface over the entire <br />area. Avoid loop formation and cavities. <br />The swelling behaviour is approx. 460% within 24h of application - in <br />demineralised water. <br />The allowed maximum water pressure is 2.0 bars. <br />SCHOMBURG reference products: <br />AQUAFIN-CJ6 <br />Material requirement: approx. 1.0 m / <br />linear meter. <br />AQUAFIN-CA <br />Material requirement: approx. 1 cartridge (pcs.) per 8 linear metres. <br />1 pcs</p> <p>Total 1.1.5.1</p> <p>Waterproofing of intersections with swelling joint tape <br />made from thermoplastic (AQUAFIN-CJ6)</p> <p>......................</p> <p>..............................</p> <p>..............................</p> <p>Page 19</p> <p>Project:</p> <p>www.heinze.de/at-manager</p> <p>LV name:</p> <p>SCHOMBURG</p> <p>OZ</p> <p>Compilation</p> <p>1</p> <p>Building Waterproofing</p> <p>..............................</p> <p>Sum total for composition:</p> <p>..............................</p> <p>Sum total, net:</p> <p>..............................</p> <p>Plus 19% VAT:</p> <p>..............................</p> <p>Sum total incl. VAT:</p> <p>..............................</p> <p>Sum total <br />EURO</p> <p>24/26 NT/KK</p> <p>SCHOMBURG <br />Problems Solved.</p>
