Folder_AQUAFIN-EPOX_3025_int_en.pdf
2 Pages
1.18 MB
Download
<h1>Folder_AQUAFIN-EPOX_3025_int_en.pdf</h1> <p>SCHOMBURG</p> <p>Easy and versatile <br />in use</p> <p>Problems Solved.</p> <p>Mixing <br />Shake B-component well before mixing. Allow <br />A-component and B-component to completely merge by <br />piercing the container. Mix thoroughly with a stirrer for <br />about 2 minutes. Then decant into a suitable container <br />and mix again.</p> <p>RELIABLE AND <br />IMPERMEABLE <br />AQUAFIN®-EPOX</p> <p>Changes reserved. The valid issue of the corresponding technical bulletin legally applies.</p> <p>Application <br />Apply AQUAFIN-EPOX-W under the joint sealing tapes <br />and form pieces and insert ASO-DICHTBAND-2000 and <br />bond over the entire surface. Apply AQAUFIN-EPOX to <br />the wall surface using a 4 mm notched trowel and <br />smooth it.</p> <p>AQAUFIN-EPOX must be applied in 2 layers and the <br />total dry film thickness of both layers must be at least <br />1.6 mm. <br />Sprinkle the second layer while it is still fresh with firedried quartz sand with a grain size of 0.5 mm - 1.0 mm.</p> <p>SCHOMBURG GmbH <br />Aquafinstraße 2–8 <br />D-32760 Detmold (Germany) <br />Telephone +49-5231-953-00 <br />Fax <br />+49-5231-953-333 <br />www.schomburg.com</p> <p>up to high water exposure</p> <p>for chemically exposed surfaces</p> <p>specifically for industrial requirements <br />28/25 RAc/LSt</p> <p>Apply AQUAFIN-EPOX-B to the substrates using a 4 mm <br />notched trowel and de-aerate using a de-aeration roller.</p> <p>Epoxy resin sealing under tiles <br />for demanding areas.</p> <p>schomburg.de <br />schomburg.com</p> <p>Epoxy resin sealing under tiles <br />for demanding areas.</p> <p>AQUAFIN®-EPOX <br />Wear resistant and durable.</p> <p>Technical data <br />Base material</p> <p>Epoxy resin</p> <p>Density (spec. weight)</p> <p>approx. 1.3 g/cm3</p> <p>Shore-A hardness <br />(ISO 868)</p> <p>approx. 80</p> <p>AQUAFIN-EPOX is available in two versions: <br />AQUAFIN-EPOX-B – the flowable version for floor substrates. <br />It enables quick and effortless application. <br />AQUAFIN-EPOX-W – the non-slump variant for wall surfaces. <br />It allows for even application and precise work on wall <br />penetrations.</p> <p>Water vapour <br />permeability, <br />SD value</p> <p>33- 42 m</p> <p>Classification of fire <br />behaviour in accordance <br />with DIN</p> <p>EN 13501-1 Efl</p> <p>Both versions are white – ideal for glass mosaics or <br />translucent coverings, as nothing shines through. For better <br />visual control during processing, AQUAFIN-EPOX can be <br />coloured in a subtle grey tone using the ASO-FP colour paste.</p> <p>Mix ratio, <br />component A</p> <p>100 Weight fractions</p> <p>Mix ratio, <br />component B</p> <p>25 Weight fractions</p> <p>Mixing time</p> <p>approx. 2 minutes</p> <p>Substrate/application <br />temperature</p> <p>approx. 10- 30 °C</p> <p>Consumption per m2 <br />and mm layer thickness</p> <p>approx. 1.5 kg</p> <p>Pot life <br />Overcoat after (min.) <br />Foot traffic after <br />Overcoat after (max.)</p> <p>approx. 60 minutes <br />after approx. 16 hours <br />approx. 16 hours <br />up to 7 days</p> <p>AQUAFIN-EPOX offers a safe and durable solution for <br />waterproofing highly exposed areas. Even under heavy water <br />loads or pressurized water – as occurs in swimming pool <br />construction – AQUAFIN-EPOX remains absolutely reliable.</p> <p>A real added value for your health − AQUAFIN-EPOX is free <br />of isocyanates.</p> <p>Areas of application <br />• as bonded waterproofing under tiles and boards <br />• as composite waterproofing up to a very high water <br />exposure class <br />• for commercial kitchens, rooms with chemical load and <br />rooms with a high water vapour load (e.g. steam rooms) <br />• in conjunction with the SCHOMBURG joint sealing tape <br />systems <br />• as bonded waterproofing underwater and for swimming <br />pool building <br />Properties <br />• 2-component reaction resin waterproofing <br />• bonded waterproofing (AIV) <br />• solvent free <br />• highly resistant to chemicals <br />• highly flexible and crack-bridging <br />Advantages <br />• tested system product <br />• free from polyurethanes and isocyanates <br />• for better work control, colour can be adjusted with colour <br />paste</p> <p>Learn more <br />about the <br />products <br />AQUAFIN-EPOX-W</p> <p>AQUAFIN-EPOX-B</p> <p>ASO-FP</p>
