Brochure Concrete technology2024.pdf
30 Pages
5.43 MB
Download
<h1>Brochure Concrete technology2024.pdf</h1> <p>Concrete technology</p> <p>Concrete technology <br />Product information</p> <p>SCHOMBURG concrete technology Benefits from our products. <br />The concrete industry world is very diverse and, for the most part, it cannot be described in one <br />sentence. Balancing the function, form and colour in such a way as to create inspiration, aesthetics and <br />mood is a goal that SCHOMBURG has dedicated itself to. <br />Many factors influence the result. According to this idea, you need a wide range of products and <br />solutions from various fields. We have gathered our experience in the “Area of competence in concrete <br />technology”. <br />Different concrete products require equally diverse solutions. Here, high quality, perfectly matched <br />concrete admixtures for the entire spectrum of the concrete industry play a decisive role. For more <br />information, please visit www.schomburg.pl</p> <p>Concrete technology <br />Product information</p> <p>Table of contents <br />4</p> <p>Admixtures for vibro-pressed concrete</p> <p>5 <br />6 <br />7 <br />8 <br />9 <br />10 <br />11</p> <p>PURCRETE-BV10, PURCRETE-150 <br />PURCRETE-75, PURCRETE-75 PLUS <br />PURCRETE-40, PURCRETE-50 <br />REMICRETE-VB1-PLUS, REMICRETE-BW3 <br />PURCOLOR-5000, PURCOLOR-S1 <br />REMIPHOB-B3,</p> <p>Pigments for concrete</p> <p>11 REMICOLOR <br />12</p> <p>Admixtures for ready-mixed concrete, prefabrication, <br />architectural concrete</p> <p>15 REMICRETE-SP62, BETOCRETE-F27 <br />16 BETOCRETE-F,2 REMICRETE-SP22 <br />17 REMICRETE-SP10, SAVEMIX-4000 <br />18 REMI-AIR-200, RUXOLITH-T5 <br />19 REMI-FROST, REMI-FROST-45 <br />20 PURCRETE-DF, REMIPLAST-M36 <br />21</p> <p>Surface protection agents</p> <p>22 SILEX-GLOSS, SILEX-MATT <br />23 REMISIL-CI, REMISIL-SI, <br />24 REMISIL, REMISIL-HE <br />25 REMISIL-TOP <br />26</p> <p>Agents for cleaning and renovation of concrete <br />surfaces</p> <p>27 <br />28 </p> <p>ASO-R005, BICOLOR <br />RENOGAL</p> <p>Admixtures for vibro-pressed <br />concrete</p> <p>Admixtures for vibro-pressed concrete are mainly plasticizing, aerating, sealing preparations, <br />limiting calcareous efflorescence. <br />Depending on the type of product - they positively affect the batch and compaction of the <br />product, reduce sticking to the stamp, intensify the colour, seal, and reduce efflorescence.</p> <p>4</p> <p>ADMIXTURES FOR VIBRO-PRESSED CONCRETE</p> <p>PURCRETE-BV10 <br />Admixture to mortars and vibro-pressed concrete</p> <p>Properties: <br />Thanks to the plasticizing effect, PURCRETE-BV10 allows for better dispersion of cement grains and <br />reduction of friction forces between cement and aggregate grains. The concrete produced <br />features enhanced compaction. <br />Application: <br />PURCRETE-BV10 is a plasticizing admixture designed for the production of concrete in a wet <br />consistency. Concrete products with this admixture ensure good closure of the side surfaces, <br />excellent formation of streaks, and lack of adhesion of the mix to the stamp. <br />Application rate: <br />- recommended: 0.2–0.4% to the weight of the binder. <br />- it depends on (but is not limited to) the reactivity of the cement and the grain size curve. <br />- before applying the admixture, it is recommended to perform tests. <br />- it is recommended to mix the product before use.</p> <p>PURCRETE-150 <br />Strong moistening admixture for vibro-pressed concrete</p> <p>Properties: <br />The admixture offers high surface activity, which translates into better homogenization of the <br />concrete mix, significantly improving the batch. The admixture shows the best properties in mixes <br />with a moist consistency. It enhances the compaction of vibro-pressed products. <br />It has an increased ability to hold water in a concrete mix, which leads to a higher degree of <br />hydration. It has a positive effect on early and ultimate compressive strength. <br />Application: <br />PURCRETE-150 is an admixture for the production of vibro-pressed concrete (construction layer). <br />The admixture is particularly suitable for manufacturing prefabricated elements such as: <br />- paving stones, <br />- curbs and edges, <br />- paving slabs, <br />- concrete blocks, <br />- barrel sections. <br />Application rate: <br />0.1–0.5% to the weight of the binding agent. <br />Best rate – 0.2-0.25% <br />It is recommended to carry out a test before use. The application rate depends on the desired <br />result and must be adapted to the other additives in the mix. <br />It is recommended to mix the product before use.</p> <p>5</p> <p>ADMIXTURES FOR VIBRO-PRESSED CONCRETE</p> <p>PURCRETE-75 <br />Moistening admixture for vibro-pressed concrete</p> <p>Properties: <br />The admixture offers high surface activity, which translates into better homogenization of the <br />concrete mix, significantly improving the batch. The admixture shows the best properties in mixes <br />with a moist consistency. It enhances the compaction of vibro-pressed products. <br />It has an increased ability to hold water in a concrete mix, which leads to a higher degree of <br />hydration. It has a positive effect on early and ultimate compressive strength. <br />Application: <br />PURCRETE-75 is an admixture for the production of vibro-pressed concrete (construction layer), <br />The admixture is particularly suitable for manufacturing prefabricated elements such as: <br />- paving stones, <br />- curbs and edges, <br />- paving slabs, <br />- concrete blocks, <br />- barrel sections. <br />Application rate: <br />0.2–0.5% to the weight of the binding agent. It is recommended to carry out a test before use. <br />The application rate depends on the desired result and must be adapted to the other additives in <br />the mix. It is recommended to mix the product before use.</p> <p>PURCRETE-75 PLUS <br />Admixture based on surfactants for vibro-pressed concrete</p> <p>Properties: <br />PURCRETE-75 PLUS offers high surface activity, which translates into better homogenization of the <br />concrete mix, significantly improving the batch. The admixture shows the best properties in mixes <br />with a moist consistency. It enhances the compaction of vibro-pressed products. It has an <br />increased ability to hold water in a concrete mix, which leads to a higher degree of hydration. <br />It has a positive effect on early and ultimate compressive strength. Concrete products with this <br />admixture offer a good closure of the side surfaces with a clear draft, stable geometry and sharp <br />edges. <br />Application (construction and surface layer): <br />PURCRETE-75 PLUS is an admixture for the production of vibro-pressed concrete (construction and <br />external layer). The admixture is particularly suitable for manufacturing prefabricated elements <br />such as: <br />- paving stones, <br />- curbs and edges, <br />- paving slabs, <br />- concrete blocks. <br />Application rate: <br />0.2–0.5% to the weight of the binding agent. <br />Mix before use.</p> <p>6</p> <p>ADMIXTURES FOR VIBRO-PRESSED CONCRETE</p> <p>PURCRETE-40 <br />Admixture for vibro-pressed concrete on ordinary and light aggregates</p> <p>Properties: <br />Thanks to the plasticizing effect, PURCRETE-40 allows for better dispersion of cement grains and <br />reduction of friction forces between cement and aggregate grains. Improves the batch. The <br />concrete produced features enhanced compaction. <br />Application: <br />PURCRETE-40 is a plasticizing admixture designed for the production of concrete in wet consistency. Concrete products with this admixture offer a good closure of the side surfaces. The <br />admixture is suitable for manufacturing prefabricated elements such as: <br />- paving stones, <br />- curbs and edges, <br />- paving slabs, <br />- hollow tiles on light aggregates. <br />Application rate: <br />Recommended: 0.2–0.4% to the weight of the binder; Testing is recommended before using the <br />admixture. <br />It is recommended to mix the product before use.</p> <p>PURCRETE-50 <br />Admixture for vibro-pressed and vibrated concrete</p> <p>Properties: <br />The PURCRETE-50 offers high surface activity, which translates into better homogenization of the <br />concrete mix, significantly improving the batch. The admixture shows the best properties in mixes <br />with a moist consistency. It enhances the compaction of vibro-pressed and vibrated products. <br />It has an increased ability to hold water in a concrete mix, which leads to a higher degree of <br />hydration. It has a positive effect on early and ultimate compressive strength. Concrete products <br />with this admixture offer a good closure of the side surfaces. <br />Application: <br />PURCRETE-50 is an admixture for the production of vibro-pressed concrete (construction layer). <br />Vibrated concrete. The admixture is particularly suitable for manufacturing prefabricated elements <br />such as: <br />- paving stones, <br />- curbs and edges, <br />- paving slabs, <br />- concrete blocks, <br />- barrel sections, <br />- precast concrete pavement panels, <br />- jomb-type slabs. <br />Application rate: <br />0.3–0.5% to the weight of the binding agent. <br />It is recommended to carry out a test before use. <br />The application rate depends on the desired result and must be adapted to the other additives in <br />the mix. It is recommended to mix the product before use.</p> <p>7</p> <p>ADMIXTURES FOR VIBRO-PRESSED CONCRETE</p> <p>REMICRETE-VB1-PLUS (BV) <br />Special aeration and plasticizing admixture for PCE-based vibro-pressed concrete</p> <p>Properties: <br />It is an aerating and plasticizing admixture based on modified polycarboxylic esters, intended for <br />the production of concrete built in the weather barrier (as well as the construction layer) of <br />vibro-pressed elements. <br />Application: <br />REMICRETE-VB1-PLUS (BV) is used in the production of the weather barrier to prevent the mix from <br />sticking to the stamp. Thanks to better dispersion of cement grains, is enables faster growth of <br />early and ultimate compressive strength and higher resistance to de-icing agents. REMICRETEVB1-PLUS (BV) is designed for the production of vibro-pressed elements such as: <br />- paving stones, <br />- curbs, <br />- paving slabs, <br />- piled walls, <br />- structural landscaping elements, etc. <br />Application rate: <br />0.2–1.2% to the weight of the binder. <br />The application rate depends on, but is not limited to, the reactivity of the cement and the grain <br />size curve; <br />Testing is recommended before using the admixture. It is recommended to mix the product before <br />use.</p> <p>REMICRETE-BW3 (LP/BV) <br />Aeration and plasticizing admixture with a wet consistency for high concrete products such as curbs, edges, effluent channels, etc.</p> <p>Properties: <br />REMICRETE-BW3 (LP/BV) causes dispersion of cement grains leading to better homogenization <br />of the mix and reduced friction between concrete components. With this admixture, you can <br />obtain a higher density concrete compared to traditional plasticizing admixtures. The use of <br />REMICRETE-BW3 (LP/BV) increases the sand equivalent value, improves the batched water <br />application rate, and reduces the amount of cement per 1 m3 of the concrete mix. <br />Application (in the construction layer): <br />It is an aerating and plasticizing admixture based on modified polycarboxyl esters and surfactants intended for the production of vibro-pressed concrete. If you add this admixture, you can <br />obtain the best amount of batched water without the so-called “barrel” effect. The admixture <br />improves the dispersion of cement grains, which accelerates early compressive strength and <br />improves ultimate compressive strength. REMICRETE-BW3 (LP/BV) is designed for the production <br />of vibro-pressed elements such as paving stones, curbs, paving slabs, etc. <br />Application rate: <br />Recommended: 0.2–1.2% to the weight of cement. <br />Best rate: 0.4–0.5%. <br />The application rate depends on, but is not limited to, the reactivity of the cement and the grain <br />size curve; Testing is recommended before using the admixture. <br />It is recommended to mix the product before use.</p> <p>8</p> <p>ADMIXTURES FOR VIBRO-PRESSED CONCRETE</p> <p>PURCOLOR-5000 <br />This plasticiser for vibro-pressed concrete reduces the formation of calcium efflorescence and sticking to the stamp</p> <p>Properties: <br />PURCOLOR-5000 is an admixture that reduces the growth of calcium efflorescence and increases <br />the colour intensity of individual elements. It improves the batch and reduces sticking to the stamp. <br />Application: <br />The admixture is used in the production of the surface layer of dyed prefabricated elements, <br />products for road construction and structural landscaping elements such as: <br />- concrete paving stones, <br />- piled walls, <br />- concrete pots, <br />- curbs, <br />- paving slabs, <br />- structural landscaping elements. <br />Application rate: <br />Recommended application rate: 0.2–0.5% to the weight of the binder. <br />It depends on, but is not limited to, the reactivity of the cement and the grain size curve. <br />Testing is recommended before using the admixture. <br />It is recommended to mix the product before use.</p> <p>PURCOLOR-S1 (DM) <br />Sealing admixture limiting efflorescence, intended for the production of vibro-pressed products</p> <p>Properties: <br />It is a liquid sealing admixture designed for the production of concrete products with high <br />durability and aesthetic values. Owing to the active ingredients, the admixture has a positive <br />effect on the reduction of both primary and secondary calcium efflorescence. <br />Application: <br />PURCOLOR-S1 (DM) is recommended for the production of wet concrete in the construction layer <br />and weather barrier: concrete paving stones, curbs, slabs, piled walls, pots, concrete cladding, <br />decorative elements. <br />Advantages: <br />- highly effective reduction of capillary rise and water uptake, <br />- concrete sealing effect resistant to changing weather conditions, <br />- highly effective reduction of calcium efflorescence in coloured concrete, <br />- higher degree of compaction of concrete products. <br />Application rate: <br />0.6–1.6% wt. in relation to the amount of binder (cement/filler). <br />The appropriate proportions should be determined in the preliminary tests using the type of <br />cement and the appropriate concrete mass. <br />The added amount of PURCOLOR-S1 (DM) should be determined; taking into account the <br />treatment criteria and the required characteristics of the target product. <br />It is recommended to mix the product before use.</p> <p>9</p> <p>ADMIXTURES FOR VIBRO-PRESSED CONCRETE</p> <p>REMIPHOB-B3 (DM) <br />Admixture ensuring full-body hydrophobization of mineral construction materials</p> <p>Properties: <br />REMIPHOB-B3 (DM) is a high-performance admixture that ensures full-body hydrophobization of <br />mineral construction materials and enables optimization of the concrete structure. <br />Application: <br />REMIPHOB-B3 (DM) is a concrete admixture designed for the production of concrete products <br />with significantly reduced water absorption. Concrete gains high density thanks to its plasticizing <br />properties. Concrete is much easier to compact, acquires a uniform consistency, which in turn <br />allows to obtain even surfaces. It reduces the occurrence of calcareous efflorescence, reduces the <br />phenomenon of capillary rise and increases the resistance to de-icing agents. <br />Application rate: <br />1.0–2.0% wt. in relation to the amount of binder (cement/filler). The appropriate proportions <br />should be checked in the preliminary tests using the type of cement and the appropriate concrete <br />mass. It is recommended to mix the product before use.</p> <p>10</p> <p>PIGMENTS FOR CONCRETE</p> <p>Pigments for concrete</p> <p>REMICOLOR liquid pigment is used in the construction materials industry. <br />It is especially recommended to use in the production of coloured paving stones, curbs, <br />and paving slabs. The dye can also be utilized in the production of factory-made <br />coloured concrete.</p> <p>REMICOLOR <br />Liquid pigment</p> <p>Properties: <br />It is produced using pigments made of iron oxides and special technology, so that its resistance to <br />light and the influence of weather conditions do not deteriorate. REMICOLOR can be pumped <br />and, thanks to its particularly high dispersion and uniformity, ensures uniform and intense concrete <br />colours. The dye is produced using pigments made of REMIFEROX iron oxides and a special <br />technology. <br />Application: <br />REMICOLOR liquid dye is used in the construction materials industry. It is especially recommended to use in the production of coloured paving stones, curbs, and paving slabs. The dye can <br />also be utilized in the production of factory-made coloured concrete. <br />Application rate: <br />The dye is applied at a rate of 4–6% in relation to the binding agent. <br />It is available in the following shades: <br />- red, brown, yellow, orange, anthracite, black, white.</p> <p>11</p> <p>PIGMENTS FOR CONCRETE</p> <p>UKŁADANIE PŁYTEK / KAMIENIA NATURALNEGO / JASTRYCHU</p> <p>Admixtures for ready-mixed concrete, prefabrication, architectural <br />concrete <br />Admixtures for concrete mainly include plasticizing, fluidizing, retarding (delaying) or accelerating bonding, aerating, and sealing preparations. <br />Currently, you can find on the market a wide range of admixtures for concrete. Their consumption is constantly increasing. One of the admixtures is a plasticizer, which significantly reduces <br />the surface tension of batched water and plasticizes the concrete mix. Superplasticizer is a type <br />of admixture for concrete, which causes the formation of a double ion layer around the cement <br />grains, which reduces the friction forces, intensively disperses cement paste, and liquefies the <br />concrete mix. <br />Admixtures for concrete perform in many other functions. They reduce water demand of the <br />components of the concrete mix, increase ultimate compressive strength, and improve concrete <br />frost resistance. A big advantage of concrete admixtures is also the improvement of concrete <br />appearance, which is of great importance for the architecture of the entire facility.</p> <p>without REMICRETE </p> <p>14</p> <p>with REMICRETE</p> <p>ADMIXTURES FOR READY-MIXED CONCRETE, <br />PREFABRICATION, ARCHITECTURAL CONCRETE</p> <p>REMICRETE-SP62 (FM) <br />Highly effective fluidizing admixture for concrete with the required high early compressive strength</p> <p>Properties: <br />It is a highly concentrated liquid admixture. Using this admixture, you can obtain a homogeneous <br />mix in which the friction forces between the components of the mix are minimized. REMICRETE-SP62 (FM), with its high potential for reducing batched water, can be used at a small rate <br />to achieve the required consistency. With the use of a modern raw material base, we achieved <br />an enormous increase in early compressive strength. Compared to concrete made with traditional <br />fluidizing admixtures, when you use REMICRETE-SP62 (FM), you reduce the formwork removal <br />time to 4 hours. <br />Application: <br />REMICRETE-SP62 (FM) has been developed specifically for manufacturers of prefabricated <br />concrete elements. This admixture is used where concrete with a low water-cement ratio and a <br />high content of mineral additives is necessary to maintain a liquid consistency and high workability. REMICRETE-SP62 (FM) is designed for the production of F5 to F6 concrete, as well as for <br />self-compacting concrete (SCC/SVB) with the required high early compressive strength and <br />architectural concrete. <br />Application rate: <br />Recommended application rate: 0.2–1.8% to the weight of the binder. <br />It depends on (but is not limited to) the reactivity of the cement and the grain size curve. <br />Testing is recommended before using the admixture. <br />It is recommended to mix the product before use.</p> <p>BETOCRETE-F27 (FM) <br />Fluidizing admixture for concrete</p> <p>Properties: <br />This admixture is produced using naphthalene’s and lignosulfonates. At a low application rate, <br />it acts as a standard plasticizing admixture, whereas at a higher rate – as a fluidizing admixture. <br />BETOCRETE-F27 (FM) can reduce the water-cement ratio at the same consistency or fluidize the <br />concrete mix at the same w/c ratio. <br />Application: <br />The BETOCRETE-F27 (FM) can be used in all concrete types produced in accordance with <br />PN-EN 206-1. It is also used in the production of ready-mixed concrete and prefabricated <br />(especially thin-walled) elements. The admixture does not reduce the early compressive strength <br />and increases the ultimate compressive strength of concrete compared to standard concrete. The <br />admixture can be used in reinforced and prestressed concrete. <br />Application rate: <br />Recommended application rate: 0.3–2.0% to the weight of the binder. <br />Best rate: 1.0–1.5%. <br />It depends on, but is not limited to, the reactivity of the cement and the grain size curve. <br />Testing is recommended before using the admixture. <br />It is recommended to mix the product before use.</p> <p>15</p> <p>ADMIXTURES FOR READY-MIXED CONCRETE, <br />PREFABRICATION, ARCHITECTURAL CONCRETE</p> <p>BETOCRETE-F2 (FM) <br />Fluidizing admixture</p> <p>Properties: <br />This admixture is produced using naphthalene. At a low application rate, it acts as a standard <br />plasticizing admixture, whereas at a higher rate – as a fluidizing admixture. BETOCRETE-F2 (FM) <br />can reduce the water-cement ratio at the same consistency or fluidize the concrete mix at the <br />same w/c ratio. <br />Application: <br />The BETOCRETE-F2 (FM) can be used in all concrete types produced in accordance with <br />PN-EN 206-1. It is also used in the production of ready-mixed concrete and prefabricated <br />(especially thin-walled) elements. <br />Application rate: <br />Recommended application rate: 0.3–2.0% to the weight of the binder. <br />It depends on (but is not limited to) the reactivity of the cement and the grain size curve. <br />Testing is recommended before using the admixture. <br />It is recommended to mix the product before use.</p> <p>REMICRETE-SP22 (FM) <br />PCE-based fluidizing admixture for ready-mixed concrete</p> <p>Properties: <br />It is a highly effective, state-of-the-art admixture based on polyether carboxylate. Compared to <br />traditional plasticizing additives, thanks to the use of modern raw materials, it is possible to <br />produce very homogeneous concrete mixes, in which the internal friction forces between the <br />components are minimized. The admixture allows shorter mixing times than for concentrated <br />products. The high efficiency of the admixture gives the possibility of obtaining a complex <br />consistency at a low application rate. The use of REMICRETE-SP22 (FM) increases the early and <br />ultimate compressive strength of concrete. <br />Application: <br />REMICRETE-SP22 (FM) is used in the production of concrete and in prefabrication. If you use the <br />admixture, you can obtain very low w/c ratios, and thus increase the strength and resistance to <br />chemical and physical aggression. REMICRETE-SP22 (FM) is an admixture that works particularly <br />well in the production of self-compacting concrete (SCC/SVB). The admixture can be used in <br />reinforced and prestressed concrete. It does not delay the early strength build-up. <br />Application rate: <br />Recommended application rate: 0.4–2.0% to the weight of the binder. <br />It depends on (but is not limited to) the reactivity of the cement and the grain size curve. <br />Before applying the admixture, you are recommended to make trial batches. <br />It is recommended to mix the product before use.</p> <p>16</p> <p>ADMIXTURES FOR READY-MIXED CONCRETE, <br />PREFABRICATION, ARCHITECTURAL CONCRETE</p> <p>REMICRETE-SP10 (FM) <br />Fluidizing admixture for high-performance (BWW) and self-compacting (SCC) concrete</p> <p>Properties: <br />REMICRETE-SP10 (FM) is a high-effective, state-of-the art admixture based on polyether carboxylate. Compared to traditional plasticizing additives, thanks to the use of modern raw materials, it is <br />possible to produce very homogeneous concrete mixes, in which the internal friction forces <br />between the components are minimized. The very high efficiency of the admixture gives the <br />possibility of obtaining the assumed consistency at a low application rate. The use of <br />REMICRETE-SP10 (FM) increases the early and ultimate compressive strength of concrete. <br />Application: <br />REMICRETE-SP10 (FM) is used in the production of concrete and in prefabrication. If you use the <br />admixture, you can obtain very low w/c ratios, and thus increase the strength and resistance to <br />chemical and physical aggression. REMICRETE-SP10 (FM). It is an admixture that works particularly well in the production of self-compacting concrete (SCC/SVB), in which a high content of silt <br />fractions is required. <br />Application rate: <br />Recommended application rate: 0.2–1.6% to the weight of the binder. <br />It depends on (but is not limited to) the reactivity of the cement and the grain size curve. <br />Testing is recommended before using the admixture. <br />It is recommended to mix the product before use.</p> <p>SAVEMIX-4000 (BV) <br />A plasticizing admixture for concrete that significantly reduces the amount of water</p> <p>Properties: <br />When used in commodity concrete, it causes better dispersion of cement grains, leading to better <br />homogenization of the mix and reduced friction between concrete components. This facilitates <br />pumping, incorporating and compacting the concrete mix. If you use SAVEMIX-4000 (BV), you <br />reduce the w/c ratio while maintaining the same consistency or increase the total amount mix <br />while maintaining the w/c ratio. <br />Application: <br />SAVEMIX-4000 (BV) is a versatile admixture designed for the production of ready-mixed <br />concrete. The admixture allows to obtain consistency in the F3 range while achieving high early <br />and ultimate compressive strength of concrete. <br />The SAVEMIX-4000 (BV) is designed for: <br />- façade concrete, <br />- pumpable concrete, <br />- all concrete of normal consistency. <br />Application rate: <br />Recommended: 0.2–1.1% to the weight of cement. <br />It depends on (but is not limited to) the reactivity of the cement and the grain size curve. <br />Testing is recommended before using the admixture according to the applicable regulations. <br />It is recommended to mix the product before use.</p> <p>17</p> <p>ADMIXTURES FOR READY-MIXED CONCRETE, <br />PREFABRICATION, ARCHITECTURAL CONCRETE</p> <p>REMI-AIR-200 (LP) <br />Aerating admixture</p> <p>Properties: <br />REMI-AIR-200 (LP) leads to the formation of microscopic air bubbles in the mix with a specific <br />decomposition factor in hardened concrete. Spherical bubbles absorb the pressure resulting from <br />the increase in the volume of freezing water, preventing the formation of microcracks. <br />The introduction of additional air bubbles into the fresh mix improves workability and homogenizes the mix. REMI-AIR-200 (LP) does not affect the cement hydration process. <br />Application: <br />REMI-AIR-200 (LP) is an admixture intended for use in concrete working in the exposure class up <br />to XF4, in which there is frost aggression in an aquatic environment strongly saturated with de-icing <br />agents. Such conditions occur, for example, on bridges, in road concrete, in tunnels, port wharves, <br />or sewage treatment plants. <br />Application rate: <br />Recommended application rate: 0.05–0.5% to the weight of the binder. <br />It depends on (but is not limited to) the reactivity of the cement and the grain size curve. <br />Before applying the admixture, you are recommended to make trial batches. <br />It is recommended to mix the product before use.</p> <p>RUXOLITH-T5 (VZ) <br />Phosphate binding retarding admixture</p> <p>Properties: <br />RUXOLITH-T5 (VZ) delays the cement binding process, so that the concrete mix remains workable <br />for longer. By extending during hydration, the formation of a large amount of heat in the first <br />period is reduced, thus preventing the formation of thermal stresses and scratches in solid <br />concrete elements. <br />Application: <br />RUXOLITH-T5 (VZ) is especially suitable for use in high ambient temperatures and in large solid <br />concrete elements. RUXOLITH-T5 (VZ) is used wherever working properties of a mix require <br />a longer retention time. <br />Application rate: <br />Recommended application rate: 0.2–3.0% to the weight of the binder. <br />It depends on (but is not limited to) the reactivity of the cement and the grain size curve. <br />Testing is recommended before using the admixture. <br />It is recommended to mix the product before use.</p> <p>18</p> <p>ADMIXTURES FOR READY-MIXED CONCRETE, <br />PREFABRICATION, ARCHITECTURAL CONCRETE</p> <p>REMI-FROST (BV) <br />Anti-freezing admixture for concrete and mortar</p> <p>Properties: <br />REMI-FROST (BV) reduces the freezing point of batched water in concrete and accelerates <br />cement binding. As a result, this leads to an increase in the strength of early compressive strength <br />and allows to shorten the care period under reduced temperature conditions. The admixture also <br />has a plasticizing effect, thanks to which, with a constant water-cement ratio, the mix has higher <br />liquidity than non-admixture concrete. <br />Application: <br />The REMI-FROST (BV) allows you to perform concreting at a reduced ambient temperature. <br />Application rate: <br />Recommended application rate: 0.2–2.0% to the weight of the binder.</p> <p>REMI-FROST-45 (BE) <br />Admixture accelerating the binding time</p> <p>Properties: <br />REMI-FROST-45 (BE) is an admixture that accelerates cement binding time, which is especially <br />recommended for use at low air temperatures. The introduction of REMI-FROST-45 (BE) into the <br />concrete mix reduces the freezing temperature of the water, which allows the concrete mix to be <br />made at an air temperature of -10°C without inhibiting cement hydration. REMI-FROST-45 (BE) <br />increases early compressive strength of concrete. The admixture also acts as a corrosion inhibitor <br />for reinforcement steel. REMI-FROST-45 (BE) reduces the drying of fresh concrete, thus decreases <br />the degree of shrinkage. The effective interaction of REMI-FROST-45 (BE) on the concrete mix is <br />achieved both by using Portland cement without additives and blast-furnace cement. <br />Application: <br />It acts as an admixture accelerating the time of cement binding in production at reduced temperatures: <br />- concreting under winter conditions, <br />- prefabrication. <br />Application rate: <br />Recommended dosage 0.2-2.5% by weight of binder. <br />The application rate depends on (but is not limited to) the type of cement, ambient temperature, <br />installation time, and care method. When concreting in winter, it is recommended to use clean <br />Portland cement due to the faster dynamics of strength gain. <br />It is recommended to mix the product before use.</p> <p>19</p> <p>ADMIXTURES FOR READY-MIXED CONCRETE, <br />PREFABRICATION, ARCHITECTURAL CONCRETE</p> <p>PURCRETE-DF <br />Reducer-deaerator decreasing concrete porosity</p> <p>Properties: <br />PURCRETE-DF reduces the volume of pores in the concrete mix, contributing to a smooth surface <br />of the hardened concrete. <br />Application: <br />It is recommended especially for high-quality concrete, and liquid and concrete mixes, where <br />a smooth surface is required after hardening. <br />Application rate: <br />Recommended dosage 0.2-0.8% by weight of binder. <br />It depends on (but is not limited) to, the reactivity of the cement and the grain size curve. <br />Before applying the admixture, you are recommended to make trial batches.</p> <p>REMIPLAST-M36 <br />Admixture for plasticizing and aeration mortar</p> <p>Properties: <br />Mortar based on this admixture has: <br />- Very good working properties thanks to proper mortar aeration. <br />- Very good adhesion to the ground in combination with the lack of flow effect. <br />- Very good workability. <br />- At a much higher application rate, it allows extending the working time. <br />Application: <br />REMIPLAST-M36 is designed for the production of ready-mixed mortars produced on site and in <br />concrete production plants. <br />Application rate: <br />Recommended application rate: 0.2–0.4% of cement weight. <br />To achieve a longer working time, the recommended application rate is 0.8–1.0 cement weight. <br />The application rate depends on (but is not limited to) the composition of the mortar, the grain size <br />curve, and the reactivity of the cement. <br />The admixture application rate may vary depending on the ambient temperature. <br />Testing is recommended before using the admixture. <br />It is recommended to mix the product before use.</p> <p>20</p> <p>Surface protection agents</p> <p>Depending on the intended purpose, surfaces are exposed to various types of factors, such as <br />organic pollutants, chemical substances, atmospheric conditions, therefore, an extremely <br />important stage of surface treatment is its proper protection against harmful factors that occur in <br />an environment. To protect concrete surfaces, you should use sealers, which at the same time <br />improves the appearance, giving an intense colour, strengthens the structure and protects <br />against the harmful effects of frost and de-icing salts.</p> <p>Development of sealers by generation (I to III).</p> <p>21</p> <p>SURFACE PROTECTION AGENTS</p> <p>SILEX-GLOSS <br />Primer to reinforce and seal concrete with shiny “wet surface” effect</p> <p>Properties: <br />It is a concrete primer and sealer. After drying, it gives the surfaces a durable, fresh look, creating <br />a glossy coating that does not turn yellow and is resistant to weather conditions. Important factors <br />that ensure durability and effectiveness include: <br />- the effect of a shiny “wet surface”; <br />- resistance to UV radiation and de-icing agents. <br />- clear colour deepening, <br />- Hydrophobization and strengthening of the substrate. <br />- facilitated cleaning of the protected substrate. <br />Application: <br />SILEX-GLOSS is designed to protect grey and coloured concrete, all types of architectural <br />concrete, external concrete and other visible concrete surfaces. It should not be used on surfaces <br />sensitive to organic solvents. <br />Consumption: <br />120–300 ml/m2 (per layer). You should perform tests to determine the consumption and performance rates.</p> <p>SILEX-MATT <br />Primer to reinforce and seal concrete with matt “wet surface” effect</p> <p>Properties: <br />It is a concrete primer and sealer. After drying, it gives the surfaces a durable, fresh look, creating <br />a matt coating that does not turn yellow and is resistant to weather conditions. <br />Important factors that ensure durability and effectiveness include: <br />- with a matt “wet surface” effect. <br />- resistance to UV radiation and de-icing agents. <br />- clear colour deepening, <br />- Hydrophobization and strengthening of the substrate. <br />- facilitated cleaning of the protected substrate. <br />Application: <br />SILEX-MATT is designed to protect grey and coloured concrete, all types of architectural concrete, external concrete, and other visible concrete surfaces. It should not be used on surfaces <br />sensitive to organic solvents. <br />Consumption: <br />120–300 ml/m2 (per layer). You should perform tests to determine the consumption and performance rates.</p> <p>22</p> <p>SURFACE PROTECTION AGENTS</p> <p>REMISIL-CI <br />Impregnating agent, intensifying dyeing, especially recommended in the production of washed concrete</p> <p>Properties: <br />It is a sealer for concrete based on dispersion of polymers in water. After the application of <br />REMISIL-CI, the resistance of concrete products to environmental factors is clearly improved. <br />Surfaces covered with sealer show high resistance to liquid penetration. REMISIL-CI is not visible <br />on the treated surface and does not give a gloss effect. <br />Application: <br />It has been developed specifically for use on concrete products such as paving stones, curbs, <br />paving slabs, and architectural concrete elements. It is particularly useful for use on hardened and <br />absorbent substrates. With REMISIL-CI, both new and old concrete products can be permanently <br />protected from the effects of weather conditions. <br />Consumption: <br />150–250 ml/m2, depending on the surface structure and substrate absorption.</p> <p>REMISIL-SI <br />Reinforcing sealer for concrete and screed with hydrophobic properties</p> <p>Properties: <br />Prevents the ingress of contaminants. <br />Advantages: <br />- ready to use. <br />- does not contain solvents. <br />- hydrophobic. <br />- strengthens the surface. <br />Application: <br />- for strengthening used concrete and screed surfaces. <br />- as a protection against evaporation on fresh concrete surfaces. <br />Consumption: <br />Depending on the absorption rate of the substrate and the method of application, approx. <br />0.15–0.55 kg/m2.</p> <p>23</p> <p>SURFACE PROTECTION AGENTS</p> <p>REMISIL <br />Solvent-free concrete sealer</p> <p>Properties: <br />REMISIL is a sealer for concrete based on dispersion of polymers in water. After applying the <br />agent, the resistance of concrete elements to weather conditions is improved. The surface is <br />protected against liquid impurities that do not penetrate the concrete structure. After drying, <br />REMISIL forms a transparent coating on the covered surface, giving it a fresh look. The preparation <br />is resistant to weather conditions and UV radiation and does not turn yellow. After using REMISIL, <br />surfaces protected with the sealer show increased resistance to chlorides. <br />Application: <br />REMISIL is applied to fresh and bound concrete surfaces and prefabricated elements, including <br />paving stones, curbs, paving slabs, and architectural concrete. It is also suitable for sealing of brick <br />walls. In particular, coloured concrete products acquire a fresh appearance, i.e. the colour of the <br />external surface becomes more intense and slightly shiny. Do not use the product on specially <br />sanded and polished surfaces due to the risk of streaks. REMISIL can also be used to prevent the <br />growth of efflorescence on fresh concrete. Apply the preparation in thin layers and evenly over the <br />entire area after approx. 12 to 14 hours after hardening of the surface. <br />Consumption: <br />80–140 ml/m2, depending on the surface structure and substrate absorption.</p> <p>REMISIL-HE <br />Sealer for concrete exposed to oils</p> <p>Properties: <br />It is a sealer for concrete based on polymers. After the application of REMISIL-HE, the resistance <br />of concrete products to environmental factors is clearly improved. Surfaces covered with this <br />agent show high resistance to the penetration of liquids, especially oils, which can be easily <br />removed with suitable materials (sand, sawdust). REMISIL-HE is not visible on the treated surface <br />and does not give a gloss effect. <br />Application: <br />REMISIL-HE has been developed specifically for use on concrete products such as paving stones, <br />curbs, paving slabs, and architectural concrete elements that may be exposed to oils. It is <br />particularly useful for use on hardened and absorbent substrates. With REMISIL-HE, both new <br />and old concrete products can be permanently protected from the effects of weather conditions. <br />Consumption: <br />100–300 ml/m2 , depending on the surface structure and substrate absorption.</p> <p>24</p> <p>SURFACE PROTECTION AGENTS</p> <p>REMISIL-TOP <br />Impregnating agent, intensifying dyeing, especially recommended in the production of washed concrete</p> <p>Properties: <br />Acrylate-based product. It improves the chemical and physical strength of the surface, in particular <br />the resistance to frost/de-icing salts and the cleaning properties of concrete and mineral substrates. <br />Application: <br />REMISIL-TOP is an agent intended for use on wet surfaces in the production of concrete products. <br />It reduces algae and moss growth to a minimum, improves discoloration, and increases colour <br />fastness. It is particularly recommended for the production of washed products with a weather <br />barrier, façades, and coloured concrete products. <br />Consumption: <br />80-150 g/m2 , depending on the surface structure and substrate absorption. You should determine <br />the consumption rate of the preparation by performing a preliminary test.</p> <p>25</p> <p>AGENTS FOR CLEANING AND RENOVATION OF CONCRETE SURFACES</p> <p>Agents for cleaning and renovation <br />of concrete surfaces <br />Concrete surfaces become dirty during construction work and everyday use. Their aesthetics <br />are deteriorating. In order to restore the surface to its original values, you can use special-purpose cleaning and renovation products.</p> <p>The effect of renovation works on concrete surfaces.</p> <p>26</p> <p>AGENTS FOR CLEANING AND RENOVATION OF CONCRETE SURFACES</p> <p>ASO-R005 <br />Concentrated preparation for the removal of mineral impurities. <br />Cleaning agent for paving stones, clinker, etc.</p> <p>Properties: <br />ASO-R005: <br />- is a highly concentrated, liquid cleaning agent. <br />- does not contain solvents, <br />- leaves no residue. <br />- dissolves bleed water, residues of mortars, concrete and lime and limestone efflorescence. <br />Application: <br />ASO-R005 is used to wash surfaces from residues of mortars, bleed water, and lime efflorescence <br />from both concrete and ceramic surfaces. <br />Consumption: <br />Depending on the degree of soiling and mixing ratio, approx. 250 ml/m².</p> <p>BICOLOR <br />An agent for the renovation of already laid, coloured paving stones and vibro-pressed elements</p> <p>Properties: <br />BICOLOR is a polymer-modified binding agent, used to renovate and refresh the colours of <br />already laid paving stones. BICOLOR compensates for differences in colour and surface <br />discolorations and damaged spots become invisible due to the deepening of colours. <br />Application: <br />BICOLOR is an agent used only to produce a colour repair coating. REMICOLOR liquid pigment <br />is used to prepare the right colour. <br />Application rate: <br />- 50–60 g/m2 of BICOLOR in the ready-to-use mix. <br />- 25–30 g/m2 of REMICOLOR in the ready-to-use mix. <br />- 300–400 g/m2 of the ready-to-use mix.</p> <p>27</p> <p>AGENTS FOR CLEANING AND RENOVATION OF CONCRETE SURFACES</p> <p>RENOGAL <br />Algae and moss cleaner. Biocidal product.</p> <p>Properties: <br />RENOGAL is a solution that acts against surface fouling by algae, mosses and fungi. It destroys the <br />existing growths and inhibits their further growth. The product can be used on all mineral surfaces. <br />Application: <br />RENOGAL is a ready-to-use liquid product (water solution) with a fungicidal effect, used to <br />maintain and protect stone products, masonry structures, or construction materials. <br />Consumption: <br />300–500 g/m2 (solution) as required.</p> <p>28</p> <p>SCHOMBURG in the media <br />Website</p> <p>Facebook</p> <p>LinkedIn</p> <p>aquafin.com</p> <p>betocrete.com</p> <p>YouTube</p> <p>Organized in a user-friendly <br />manner, our website available at <br />www.schomburg.pl allows you to <br />easily navigate the SCHOMBURG <br />product range. In addition to the <br />highly efficient search function and <br />convenient consumption calculator, <br />there are many other useful functions <br />and titbits waiting for you.</p> <p>Everything related to construction, <br />waterproofing and repair. Here <br />you can find interesting promotions <br />and information about the use of <br />our products – you should definitely <br />take a peek!</p> <p>Like our Facebook page and learn <br />more about current events, ongoing <br />product offerings, promotions, and <br />other SCHOMBURG-related news.</p> <p>In the field of concrete technology, <br />we provide interesting technical <br />information, application overview, <br />and much more.</p> <p>Like our LinkedIn page and contact <br />us. We inform you in an interesting <br />way about current topics and new <br />products from SCHOMBURG.</p> <p>Subscribe to our YouTube channel <br />SCHOMBURG - Poland and check <br />out our wide selection of videos. <br />The range is divided into different <br />products and areas of application; <br />helpful and informative videos are <br />available in different languages.</p> <p>For more product information, please ask our local <br />Technical and Commercial Advisors of Schomburg <br />Sales Network – Concrete Technology or consult <br />the Sales Department – you can contact us at <br />www.schomburg.pl, “Schomburg Sales Network – <br />Concrete Technology” tab.</p> <p>29</p> <p>The SCHOMBURG Group develops, <br />produces and distributes building product <br />systems for the areas of: <br />• <br />• <br />• <br />•</p> <p>Waterproofing and repair of buildings <br />Tiles/natural stone/screed application <br />Ground protection/floor coating systems <br />Concrete technology</p> <p>For over 80 years SCHOMBURG’s <br />development competence has been a <br />recognised feature in both the domestic and <br />the worldwide marketplace. Building product <br />systems that are produced in-house are highly <br />prized around the world.</p> <p>To meet the demanding requirements of an <br />ever-changing market, we continuously invest <br />in the research and development of new and <br />already existing products. This guarantees an <br />ever increasing product quality to the satisfaction of our customers.</p> <p>SCHOMBURG Polska Sp. z o. o. <br />ul. Sklęczkowska 18a <br />99-300 Kutno <br />tel. +48-24-254-7342 <br />faks +48-24-253-6427 <br />email biuro@schomburg.pl <br />www.schomburg.pl <br />www.schomburg.de <br />BDO 000030309</p> <p>02/24 RS/KKucz/KU 14/21 SE/NT/LiW Subject to change. The valid issue of the corresponding technical bulletin legally applies.</p> <p>Experts value the quality and the efficiency <br />of building product systems, the services and <br />therefore the core competence of the group <br />of companies.</p>
