Rapid casting resin for interior use
ASODUR®-GH-S Rapid setting casting resin for reliably closing cracks, particularly simple to apply Problems Solved.
Rapid setting silicate casting resin for interior use ASODUR®-GH-S
v er
y lo
io n
2-component casting resin, tested low-emission, mixes without tools and with very good penetration capability
w e m is
s
Technical data Basis Mixing ratio
Modified silicate resin, 2-component 1:1 parts by volume
Application / +5 °C to +30 °C substrate temperature Processing time
approx. 15 min. at +10 °C approx. 10 min. at +20 °C approx. 7 min. at +30 °C
Overcoat after
approx. 25 min. at +20 °C
Packaging
× 300 ml bottle in the set 2 6 sets in the box
Material consumption depending on width and depth rate of the cracks and joints
Application
Mix the components
Shake for 15 seconds
Insert screed clamps
Cast free of voids
Remove excess material
Sand with quartz sand (0.1–0.6 mm)
Areas of use • ASODUR-GH-S is a particularly rapid reacting casting resin for the powerful closing of cracks and joints in unheated and heated cementitious screeds. • It is particularly suitable for time-critical work and on construction sites with no power supply. Properties • Suitable for crack and joint widths up to 5 mm. • Ready for overcoat after just 25 minutes (at +20 °C). • 2-component, supplied ready for use in predetermined mixing ratio. • Possible to mix smaller quantities without difficulty. • Mix without tools and application without waiting time. • Very low-emission per EMICODE EC1-PLUS. • Low-odour during application, odourless after hardening. • Resistant to alkaline solutions, diluted acids, salt solutions and many organic solvents.
schomburg.com
08/20 HS/Tet/KK/LiW Changes reserved. The valid issue of the corresponding technical data sheet legally applies.
SCHOMBURG GmbH Aquafinstrasse 2–8 D-32760 Detmold (Germany) Telephone +49-5231-953-00 Fax +49-5231-953-333 www.schomburg.com