Technical Datasheet AQUAFIN®-PRIMER Safety primer for building waterproofing and renovation
Material number
Contents
Unit of quantity
Colour
203901002
5
L
cloudy white
203901003
10
203901004
1
Product features Dispersion silicate primer with improved adhesion properties Ready to use Rapid drying Substrate consolidator Reduces the capillary absorbency on the building material surface. Dust-binding Solvent free
Advantages Improves the bonding of subsequent waterproofing and mortar layers Can be applied directly - without mixing Can be applied by brush, roller and spray Can be quickly overcoated - after approx. 30 minutes (matt damp) Water-repellent and improved adhesion
SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com 1/3
09/01/2024
Technical Datasheet AQUAFIN®-PRIMER Areas of application As a primer on weak and highly absorbent substrates for substrate preparation for waterproofing buildings with flexible polymer-modified thick coatings (FPD) (e.g. AQUAFIN-RB400) and mineral waterproofing slurries (MDS) (e.g. AQUAFIN-1K) or the multi-mortar ASOCRET-M30 Suitable for all cementitious substrates, e.g. concrete and masonry work. For dry and matt damp substrates For walls and floors For floor For interior and exterior use System components for waterproofing System component of THERMOPAL restoration plaster systems
Existing test certificates EMICODE licence French cert. VOC Belgian cert. VOC
Technical Data Material properties Product components Base material Consistency Density (spec. weight)
Ready to use Silicate-Dispersion Liquid approx. 1 g/cm³
Application Substrate/application temperature Consumption Overcoat after
from 5 °C to 30 °C approx. 200.00 - 250.00 g / m² approx. 30 minutes
Waterproofing
AQUAFIN-RB400 AQUAFIN-2K/M-PLUS COMBIDIC-2K-CLASSIC COMBIDIC-2K-PREMIUM ASOCRET-M30
Mortar / restoration plaster
Application technology Aids/tools Colour roller Brush Spray equipment Brush
Suitable substrate Concrete Brick and sand-lime brickwork Cement screed (CT) Cement plaster Lime-cement plaster Cement and fibre cement boards
SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com 2/3
Technical Datasheet AQUAFIN®-PRIMER Substrate preparation Requirement for substrate 1. 2. 3. 4. 5. 6.
Load-bearing dry to matt damp Clean Absorbent Free of cracks Free of adhesion inhibiting substances
Preparing the surface 1. Clean the sole overhang. 2. Completely remove the sinter layers. 3. Protect / cover adjacent surfaces and components from splashes or spray mist.
Usage Application 1. 2. 3. 4. 5.
Apply AQUAFIN®-Primer with suitable tool. Oversaturation or forming puddles must be avoided. The area can be reworked (after approx. 30 minutes) when the primer has dried to a matt, damp finish. Longer drying times do not have a negative effect on adhesion. If necessary, repeat the application.
Cleaning tools Rinse tools with water immediately after use.
Emission behaviour / building certification systems Very low emissions in accordance with GEV-EMICODE, which normally results in positive evaluations within the scope of building certification systems in accordance with DGNB, LEED, BREEAM, HQE. Suitable for indoor use in accordance with the French VOC Directive and Belgian Royal Decree C-2014/24239.
Notes Protect surfaces that are not to be treated from the effects of AQUAFIN®-Primer! Clean splashes immediately with water. Glass, metals, window frames etc. can be attacked by AQUAFIN®-Primer.
The recognised standards of construction engineering, the relevant guidelines and current regulations must be observed.
The rights of the buyer with regard to the quality of our materials are based on our terms and conditions of sale and delivery. Our technical advice team will be happy to advise you in the case of requirements that exceed the scope of the application described here. In order to be binding, a legally binding written confirmation is required. The product description does not release the user from a duty of care. Lay a test area in the event of uncertainty. This version becomes invalid in the event of a new version being issued.
SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com 3/3