BLANKOL-0 Technical Data Sheet EN 0122.pdf
1 Page
68.2 KB
Download
<h1>BLANKOL-0 Technical Data Sheet EN 0122.pdf</h1> <p>SCHOMBURG GmbH & Co. KG <br />Aquafinstrasse 2 – 8 <br />D-32760 Detmold (Germany) <br />phone + 49 -5231- 953-00 <br />fax <br />+ 49 -5231- 953-108 <br />email export@schomburg.de <br />www.schomburg.com</p> <p>Technical Data Sheet</p> <p>BLANKOL-0</p> <p>Art.-No. 4 06101</p> <p>Solvent free release and impregnating oil</p> <p>Product application: <br />BLANKOL-0 is to be applied evenly and as thin as <br />possible onto the clean and dry mould. <br />After spraying, drain off with a mineral oil resistant <br />squeegee if necessary.</p> <p>• no build-up, neutral odour, solvent free impregnating <br />and release oil <br />• minimiert Quellen und Verspröden von Holzschalungen <br />• protects steel/iron manufacturing plants as well as <br />steel formwork in general from the formation of <br />rust – therefore preventing rust flecks in the concrete <br />• biodegradable in accordance with test certificate</p> <p>Important Advice: <br />• Suitability tests should be carried out prior to usage. <br />• Avoid puddles! <br />• Excessive coating can lead to incrustations and <br />build-ups. <br />• Heated moulds up to maximum + 60 °C! <br />• BLANKOL-0 cannot be diluted with water. <br />• Excess material can be removed with a foam rubber <br />squeegee resistant to mineral oils.</p> <p>Areas of application: <br />BLANKOL-0 is especially for use in pre-cast concrete <br />manufacturing plants and building yards. BLANKOL-0 is <br />suitable for preservation when out of action for a short <br />period, for impregnating base boards whilst also using <br />as a concrete release agent. The areas of application <br />include large formwork sections, timber formwork, <br />moulds/templates and base boards. Steel formwork <br />may be preheated up to +60°C.</p> <p>Please observe a valid EU safety data sheet! <br />GISCODE: BTM 10</p> <p>Technical Data: <br />Colour: <br />yellowish <br />Consistency: <br />liquid <br />Density: <br />0.89 g/cm3 <br />Consumption: Dependent on the absorption <br />of the substrate <br />15–50 g/m2 <br />Storage: <br />cool and dry, 24 month in the original <br />unopenend container. Use opened <br />containers promptly. <br />Packaging: <br />1000 l IBCs <br />210 l drums <br />25 l canister</p> <p>This technical data sheet is a translation from German and does not consider local building codes or legal requirements. It shall be used as general reference for the product. Legally binding <br />is only the German technical data sheet or the latest Data sheet from one of our foreign subsidiaries inside their sales territory. <br />1/1</p> <p>TB/CoS/LiW</p> <p>01/22</p>
