Technical Datasheet BETOCRETE®-CP360-WP Crystalline waterproofing admixture with hydrophobic properties
Material number
Contents
Unit of quantity
Packaging
Colour
206446003
700
KG
BigBag
Grey
206446002
17
Bag
206446004
3
Bag (water soluble)
Product features Powder Increased active crack healing in concrete Sealant in accordance with DIN EN 934-2: Table 9 Improves frost resistance and resistance to thaw Reduced chloride ion migration Suitable for drinking water per DVGW worksheet W-347 and W-270 watertight concrete sealing system in accordance with BBA
Advantages Crack healing of surface and continuous cracks up to 0.4 mm possible Sealant reduces water absorption immediately Lower water input means lower input of concrete-damaging substances Increase durability of concrete component Minimisation of concrete servicing and maintenance costs
SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com 1/3
16/11/2023
Technical Datasheet BETOCRETE®-CP360-WP Areas of application For the integral crystalline waterproofing of concrete structures For foundations and watertight concrete components For economic, commercial, sports facilities and housing construction For infrastructure, water and wastewater structures For in-situ concrete, pre-cast concrete components and shotcrete BETOCRETE-CL210-WP shows the highest efficacy in exposure class XS
Technical Data Material properties Bulk density Alkali content (Na2O equivalent) Chloride content Water pollution class (WGK)
approx. 0.8 cm³ ≤ 21 percentage by weight ≤ 0.1 % 1 (Selbsteinstufung)
Mixing Mixing time Mixing time, mixer truck (transport concrete)
approx. 45 seconds approx. 1 minutes per m³
Application Application temperature Recommended dosing in regards to cement
min. 5 °C approx. 0.75 - 1.25 percentage by weight
Material consumption Material consumption rate according to the area of application
Additional technical notes
SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com 2/3
Technical Datasheet BETOCRETE®-CP360-WP Usage Dosing in concrete plant 1. BETOCRETE®-CP360-WP must be dosed onto the aggregates and mixed for at least 30 seconds before adding the water and cement. 2. Then readily mix for at least 45 seconds until usable.
Dosing in mixer truck 1. BETOCRETE®-CP360-WP is dosed directly into the mixing drum of the vehicle. 2. The mixing time must be ca. 1 Minuten pro m³ drum content (however, at least 5 minutes).
Storage conditions Storage Cool, dry, protected from sunlight. Min. 12 months in the original container. Promptly use opened container.
Disposal Product leftovers can be disposed of in accordance with disposal code AVV 17 01 07.
Notes BETOCRETE®-CP360-WP modified concretes may have crystals on the surface, depending on the composition. Concrete with BETOCRETE®-CP360-WP must be produced, applied and post-treated in accordance with the currently valid standards. Lignite fly ash is only of limited suitability. The crack expansion limitations must be complied with by the planner/engineer/structural engineer. Contrary designs must be verified after the corresponding verification and suitability! In rare cases, BETOCRETE®-CP360-WP can influence the solidification behaviour of the concrete. As a system-compatible product, RUXOLITH-T5 (VZ) is available for controlling the concrete. Before applying BETOCRETE®-CP360-WP, even with other types of additives, preliminary tests must be carried out in accordance with the valid standards. The use of CEM III/C cements is prohibited. When using water-soluble paper bags, the water demand may increase. Except for XA3 in accordance with DIN EN 206-1/DIN 1045-2
GISCODE: BZM40 Annotations Conformity / Declaration / Verification
The rights of the buyer with regard to the quality of our materials are based on our terms and conditions of sale and delivery. Our technical advice team will be happy to advise you in the case of requirements that exceed the scope of the application described here. In order to be binding, a legally binding written confirmation is required. The product description does not release the user from a duty of care. Lay a test area in the event of uncertainty. This version becomes invalid in the event of a new version being issued.
SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com 3/3