312_LV4EN_161111_MONOFLEX-XL_LEED_productdeclaration.pdf
11 Страницы
498,7 КБ
Download
<h1>312_LV4EN_161111_MONOFLEX-XL_LEED_productdeclaration.pdf</h1> <p>Reference: L15-312 / 11.11.2016</p> <p>Product Declaration - LEED® v4 Building Design and Major Renovations</p> <p>MANUFACTURER</p> <p>SCHOMBURG GmbH & Co. KG</p> <p>PRODUCT NAME</p> <p>MONOFLEX-XL</p> <p>PRODUCT</p> <p>MONOFLEX-XL is used as a thin-bed adhesive for vitrified and earthenware tiles, ceramic tiles</p> <p>32760 Detmold</p> <p>CHARACTERISTICS</p> <p>with low water absorption ≤ 0.5% (fully vitrified), clinker, mosaic and natural stone materials not</p> <p>Deutschland</p> <p>SCHOMBURG GmbH & Co. KG <br />Aquafinstraße 2</p> <p>sensitive to discolouration or those which are translucent. Due to its deformability MONOFLEX-XL <br />is suitable for fixing large format tiles. MONOFLEX-XL is suited for the assured installation on all <br />substrates conforming to DIN 18157, part 1 e.g. concrete, aerated concrete, render/plaster, <br />cement-based and calcium sulphate based screeds/ heated screeds, masonry work, moisture <br />resistant plasterboard etc. as well as on old well bonded tiled finishes.</p> <p>Product Rating <br />LEED Category</p> <p>LEED Credit</p> <p>max. influenced score</p> <p>Degree of fulfillment %</p> <p>For the product exists an EPD which can be used for the calculation of the Life-Cycle Assessment of the building under MR Credit 1 Building Life-Cycle Impact <br />Reductions / Option 4. <br />The product contributes toward satisfying MR Credit 2 "BPDO - Environmental Product Declarations" under LEED. <br />The product contributes toward satisfying MR Credit 3 "BPDO - Sourcing of Raw Materials" under LEED. <br />The product contributes toward satisfying EQ Credit 2 "Low Emitting Materials" under LEED. <br />Materials & Ressources</p> <p>Credit 1: Building Life-Cycle Impact Reductions (Option 4: LCA)</p> <p>1-3 Points</p> <p>Credit 2: BPDO - Environmental Product Declarations</p> <p>1-2 Points</p> <p>100%</p> <p>Option 1: Environmental Product Declaration</p> <p>1 Point</p> <p>50%</p> <p>50%</p> <p>Option 2: Multi-Attribute Optimization</p> <p>1 Point</p> <p>0%</p> <p>0%</p> <p>0%</p> <p>Credit 3: BPDO - Sourcing of Raw Materials</p> <p>1-2 Points</p> <p>Option 1: Raw Material Source and Extraction Reporting</p> <p>1 Point</p> <p>0%</p> <p>Option 2: Leadership Extraction Practices</p> <p>1 Point</p> <p>2.5%</p> <p>Credit 4: BPDO - Material Ingredients</p> <p>Indoor Environmental Quality</p> <p>100%</p> <p>2.5%</p> <p>1-2 Points</p> <p>Option 1: Material Ingredient Reporting</p> <p>1 Point</p> <p>0%</p> <p>0%</p> <p>Option 2: Material Ingredient Optimization</p> <p>1 Point</p> <p>0%</p> <p>0%</p> <p>Option 3: Product Manufacturer Supply Chain Optimization</p> <p>1 Point</p> <p>0%</p> <p>0%</p> <p>Credit 2: Low Emitting Materials</p> <p>1-3 Points</p> <p>100%</p> <p>100%</p> <p>About LEED & Products - www.usgbc.org <br />This declaration helps to assess products easily according to the certification system LEED® v4 Building Design and Major Renovations (excluded HEALTHCARE and SCHOOLS). <br />Products are not reviewed or certified by LEED. LEED credit requirements cover the performance of materials in aggregate, not the performance of individual products or brands. For <br />more information about LEED visit www.usgbc.org/leed. The project team or the manufacturer is responsible to declare the compliance with the project requirements to achieve LEED <br />points. Below you find an explanation of the symbols. Detailed information are on the next pages.</p> <p>ü</p> <p>Product helps to achieve the LEED <br />point in the Credit</p> <p>22%</p> <p>X% of the product contributes toward <br />satisfying the credit</p> <p>¡</p> <p>Credit is not applicable to this <br />product</p> <p>—</p> <p>Required data not specified - for required data <br />contact manufacturer</p> <p>X</p> <p>Credit requirements are not <br />fulfilled</p> <p>Page: 1</p> <p>Reference: L15-312 / 11.11.2016</p> <p>Product Declaration - LEED® v4 Building Design and Major Renovations</p> <p>MR Credit 1: Building Life-Cycle Impact Reductions (Option 4: LCA) <br />Intent <br />To encourage adaptive reuse and optimize the environmental performance of products and materials. <br />Requirement <br />Environmental Product Declaration (EPD) can be used in Credit "MR 1: Building Life-Cycle Impact Reductions" in Option 4 "Whole-Building Life-Cycle Assessment" for the calculation <br />of the Life-Cycle Assessment of the building. If no EPD exitst, generic datasets will be used. <br />Detailed Rating</p> <p>Whole-Building Life-Cycle Assessment</p> <p>Compliance</p> <p>100%</p> <p>For the product exists an EPD.</p> <p>ü</p> <p>100%</p> <p>For the product exists an EPD.</p> <p>ü</p> <p>General Information <br />No. <br />Product name <br />MONOFLEX-XL <br />A1 MONOFLEX-XL</p> <p>Manufacturer <br />SCHOMBURG <br />GmbH & Co. KG <br />SCHOMBURG <br />GmbH & Co. KG</p> <p>Option 4: <br />Mass <br />[%]</p> <p>Page: 2</p> <p>Reference: L15-312 / 11.11.2016</p> <p>Product Declaration - LEED® v4 Building Design and Major Renovations</p> <p>MR Credit 2: BPDO - Environmental Product Declarations <br />Intent <br />To encourage the use of products and materials for which life-cycle information is available and that have environmentally, economically, and socially preferable life-cycle impacts. To <br />reward project teams for selecting products from manufacturers who have verified improved environmental life-cycle impacts. <br />Requirement <br />Achieve one or more of the options below, for a maximum of 2 points. <br />Option 1: Environmental Product Declaration (1 Point) <br />Use at least 20 different permanently installed products sourced from at least five different manufacturers, for which an Environmental Product Declaration exist. <br />Proof - weighted value [%]: <br />▪ Product-specific declaration - 25 % <br />▪ Industry-wide (generic) EPD - 50 % <br />▪ Product-specific Type III EPD - 100 % <br />Option 2: Multi-Attribute Optimization (1 Point) <br />50 % of all materials (based on the material costs of the project) must be less than the industry average in terms of environmental emissions. Third party certified products that <br />demonstrate impact reduction below industry average in at least three of the following categories are valued at 100 % of their cost for credit achievement calculations. <br />▪ global warming potential (greenhouse gases), in CO2e; <br />▪ depletion of the stratospheric ozone layer, in kg CFC-11; <br />▪ acidification of land and water sources, in moles H+ or kg SO2; <br />▪ eutrophication, in kg nitrogen or kg phosphate; <br />▪ formation of tropospheric ozone, in kg NOx or kg ethene; <br />▪ and depletion of nonrenewable energy resources, in MJ. <br />Regional products (within 160 km = 100 Milen) are double-weighted. <br />Detailed Rating <br />General Information <br />No. <br />Product name <br />MONOFLEX-XL <br />A1 MONOFLEX-XL</p> <p>Manufacturer <br />SCHOMBURG <br />GmbH & Co. KG <br />SCHOMBURG <br />GmbH & Co. KG</p> <p>Option 1: Environmental Product Declaration <br />Mass <br />[%] <br />100% <br />100%</p> <p>Option 2: Multi-Attribute Optimization</p> <p>EPD Program Operator</p> <p>EPD Type - Weighted Value [%]</p> <p>Third Party Certification Program**</p> <p>Institut Bauen und Umwelt</p> <p>Industry-wide (generic) EPD -</p> <p>e.V. (IBU)</p> <p>50%</p> <p>not specified ***</p> <p>Institut Bauen und Umwelt e.V.</p> <p>Industry-wide (generic) EPD -</p> <p>(IBU)</p> <p>50%</p> <p>not specified ***</p> <p>Location* <br />see <br />location <br />see location</p> <p>* see explanation "Location Valuation Factor" on page 10 <br />** Demonstrate impact reduction below industry average <br />*** Evidence is verified by: not specified</p> <p>Page: 3</p> <p>Reference: L15-312 / 11.11.2016</p> <p>Product Declaration - LEED® v4 Building Design and Major Renovations</p> <p>MR Credit 3: BPDO - Sourcing of Raw Materials 1/2 <br />Intent <br />To encourage the use of products and materials for which life cycle information is available and that have environmentally, economically, and socially preferable life cycle impacts. To <br />reward project teams for selecting products verified to have been extracted or sourced in a responsible manner. <br />Requirement <br />Achieve one or more of the options below, for a maximum of 2 points. <br />Option 1: Raw Material Source and Extraction Reporting (1 Point) <br />Use at least 20 different permanently installed products sourced from at least five different manufacturers, who published a sustainability report of their suppliers. <br />▪ Manufacturer declared corporate sustainability report - 50 % <br />▪ Third-party verified corporate sustainability report (CSR) according to Global Reporting Initiative (GRI) Sustainability Report, Organisation for Economic Cooperation and Develoment <br />(OECD) Guidelines for Multinational Enterprises, U.N. Global Compact: Communication of Progress or ISO 26000: 2010 Guidance on Social Responsibility - 100 % <br />Option 2: Leadership Extraction Practices (1 Point) <br />25 % of all materials (based on the material costs of the project) must have at least an extended producer responsibility (closed loop or tage back programm) or are made from SAN <br />certified bio-based materials, FSC certified wood, recycling materials (post-consumer recycled content plus one-half of the pre-consumer content), salvaged or reused materials. <br />Detailed Rating <br />General Information <br />No. <br />Product name <br />MONOFLEX-XL</p> <p>Manufacturer <br />SCHOMBURG <br />GmbH & Co. KG</p> <p>Option 1: Raw Material Source and Extraction Reporting <br />Mass <br />[%] <br />100%</p> <p>percentage influential degree (weighted <br />SCHOMBURG <br />GmbH & Co. KG</p> <p>not specified <br />0%</p> <p>contribution) <br />A1 MONOFLEX-XL</p> <p>Corporate Sustainability Report Type - Weighted Value [%]</p> <p>100%</p> <p>not specified</p> <p>Page: 4</p> <p>Reference: L15-312 / 11.11.2016</p> <p>Product Declaration - LEED® v4 Building Design and Major Renovations</p> <p>MR Credit 3: BPDO - Sourcing of Raw Materials 2/2 <br />Detailed Rating <br />General Information</p> <p>Option 2: Leadership Extraction Practices <br />Extended</p> <p>No. <br />Product name</p> <p>Manufacturer</p> <p>Mass</p> <p>Producer</p> <p>[%]</p> <p>Responsibility -</p> <p>Salvaged <br />SAN [%]**</p> <p>FSC [%]***</p> <p>material [%] <br />****</p> <p>Post-</p> <p>Pre-</p> <p>Consumer [%]</p> <p>Consumer [%]</p> <p>0%</p> <p>0%</p> <p>0%</p> <p>2.5%</p> <p>0%</p> <p>2.5%</p> <p>0%</p> <p>Content [%] <br />MONOFLEX-XL</p> <p>SCHOMBURG <br />GmbH & Co. KG</p> <p>100%</p> <p>not specified</p> <p>percentage influential degree (weighted <br />SCHOMBURG <br />GmbH & Co. KG</p> <p>see <br />location</p> <p>2.5%</p> <p>contribution) <br />A1 MONOFLEX-XL</p> <p>Location*</p> <p>100%</p> <p>not specified</p> <p>0%</p> <p>0%</p> <p>0%</p> <p>see location</p> <p>* see explanation "Location Valuation Factor" on page 10 <br />** SAN certified Content [%] <br />*** FSC certified Content [%] <br />**** Content of reused and salvaged materials [%]</p> <p>Page: 5</p> <p>Reference: L15-312 / 11.11.2016</p> <p>Product Declaration - LEED® v4 Building Design and Major Renovations</p> <p>MR Credit 4: BPDO - Material Ingredients <br />Intent <br />To encourage the use of products and materials for which life-cycle information is available and that have environmentally, economically, and socially preferable life-cycle impacts. To <br />reward project teams for selecting products for which the chemical ingredients in the product are inventoried using an accepted methodology and for selecting products verified to <br />minimize the use and generation of harmful substances. To reward raw material manufacturers who produce products verified to have improved life-cycle impacts. <br />Requirement <br />Achieve one or more of the options below, for a maximum of 2 points. <br />Option 1: Material Ingredient Reporting (1 Point) <br />Use at least 20 different permanently installed products sourced from at least five different manufacturers, which published reports or data sheets with all ingredients. <br />Proofs (Weighted Value 100 %): <br />▪ Manufacturer Inventory <br />▪ Health Product Declaration (HPD) <br />▪ Cradle to Cradle (Cradle to Cradle v2 Basic or Cradle to Cradle v3 Bronze) <br />Option 2: Material Ingredient Optimization (1 Point) <br />25 % of all materials (based on the material costs of the project) must be certified by Green Screen, Cradle to Cradle or REACH. <br />▪ GreenScreen v1.2 List Translator - 100 % <br />▪ GreenScreen v1.2 Assessment - 150 % <br />▪ Cradle to Cradle v2 Gold - 100 % <br />▪ Cradle to Cradle v2 Platinum - 150 % <br />▪ Cradle to Cradle v3 Silver - 100 % <br />▪ Cradle to Cradle v3 Gold or Platinum - 150 % <br />▪ REACH - 100 % <br />Option 3: Product Manufacturer Supply Chain Optimization (1 Point) <br />25 % of all materials (based on the material costs of the project) are sourced from product manufacturers who engage in validated and robust safety, health, hazard, and risk programs <br />and are sourced from product manufacturers with independent third party verification of their supply chain (e.g. ISO 14001 & OHSAS 18000). <br />Detailed Rating</p> <p>General Information</p> <p>Option 1:</p> <p>Option 2:</p> <p>Material</p> <p>Material</p> <p>Ingredient Ingredient <br />Reporting Optimization</p> <p>No.</p> <p>Certification <br />Product name</p> <p>Manufacturer</p> <p>Mass</p> <p>Type of</p> <p>Program</p> <p>[%]</p> <p>Reporting</p> <p>Weighted</p> <p>Option 3: <br />Product Manufacturer Supply Chain Optimization</p> <p>Location*</p> <p>Value [%] <br />MONOFLEX-XL <br />A1 MONOFLEX-XL</p> <p>SCHOMBURG <br />GmbH & Co. KG <br />SCHOMBURG <br />GmbH & Co. KG</p> <p>100% <br />100%</p> <p>not</p> <p>not</p> <p>specified</p> <p>specified</p> <p>not <br />specified</p> <p>not specified</p> <p>not specified <br />not specified</p> <p>see <br />location <br />see location</p> <p>* see explanation "Location Valuation Factor" on page 10</p> <p>Page: 6</p> <p>Reference: L15-312 / 11.11.2016</p> <p>Product Declaration - LEED® v4 Building Design and Major Renovations</p> <p>EQ Credit 2: Low Emitting Materials 1/4 <br />Intent <br />To reduce concentrations of chemical contaminants that can damage air quality, human health, productivity, and the environment. <br />Requirement <br />This credit includes requirements for product manufacturing as well as project teams. It covers volatile organic compound (VOC) emissions into indoor air and the VOC content of <br />materials, as well as the testing methods by which indoor VOC emissions are determined. Different materials must meet different requirements to be considered compliant for this <br />credit. <br />Category</p> <p>Requirement <br />• General Emissions Evaluation for paints and coatings applied to walls, floors, and ceilings</p> <p>Interior paints and coatings applied on site</p> <p>• VOC content requirements for wet applied products</p> <p>Interior adhesives and sealants applied on site including flooring</p> <p>• General Emissions Evaluation</p> <p>adhesive</p> <p>• VOC content requirements for wet applied products</p> <p>Flooring</p> <p>• General Emissions Evaluation <br />• Composite Wood Evaluation</p> <p>Composite wood</p> <p>Proof: ultra-low-emitting formaldehyde (ULEF), no added formaldehyde resins (NAUF) or salvaged and <br />reused wood</p> <p>Ceilings, walls, thermal, and acoustic insulation</p> <p>• General Emissions Evaluation <br />• Furniture Evaluation</p> <p>Furniture (include in calculations if</p> <p>Proof: ANSI/BIFMA e3-2011 §7.6.1, ANSI/BIFMA e3-2011 §7.6.2, CDPH Standard Method v1.1-2010 or</p> <p>part of scope of work)</p> <p>salvaged or reused furniture</p> <p>Detailed Rating <br />General Information <br />No. <br />Product name <br />MONOFLEX-XL <br />A1 MONOFLEX-XL</p> <p>Manufacturer <br />SCHOMBURG <br />GmbH & Co. KG <br />SCHOMBURG <br />GmbH & Co. KG</p> <p>Mass <br />[%]</p> <p>Option 1:</p> <p>Option 2:</p> <p>Product Category Calculations</p> <p>Budget Calculation Method</p> <p>Category</p> <p>100% <br />100%</p> <p>Assembly Type</p> <p>Emissions Criteria</p> <p>Inherently <br />Nonemitting</p> <p>see below <br />Interior adhesives and sealants</p> <p>Flooring, Walls</p> <p>General Emissions Evaluation <br />and VOC Content</p> <p>No</p> <p>Page: 7</p> <p>Reference: L15-312 / 11.11.2016</p> <p>Product Declaration - LEED® v4 Building Design and Major Renovations</p> <p>EQ Credit 2: Low Emitting Materials 2/4 <br />Detailed Rating</p> <p>GmbH & Co. KG</p> <p>[%]</p> <p>Criteria Met</p> <p>TVOC Range <br />after 14 days</p> <p>100%</p> <p>100%</p> <p>GmbH & Co. KG</p> <p>Product Type</p> <p>ü</p> <p>see below <br />AgBB Testing and</p> <p>SCHOMBURG</p> <p>Regulation</p> <p>Actual</p> <p>A1 MONOFLEX-XL</p> <p>SCHOMBURG</p> <p>Mass</p> <p>VOC [g/l]</p> <p>MONOFLEX-XL</p> <p>Manufacturer</p> <p>VOC [g/l]</p> <p>Product name</p> <p>VOC Content <br />Allowable</p> <p>No.</p> <p>General Emissions Evaluation</p> <p>Evaluation <br />Scheme (2010) *</p> <p>Compliance</p> <p>General Information</p> <p>0.5 mg/m3 or</p> <p>SCAQMD Rule</p> <p>Ceramic tile</p> <p>less</p> <p>1168</p> <p>adhesives</p> <p>65 g/l</p> <p>0 g/l</p> <p>ü</p> <p>Other remarks on classification <br />*The product is certified by the EMICODE. The content of formaldehyde is < 10 µg/m³ at 28 days. The content of solvent is 0% (0g/l).</p> <p>EQ Credit 2: Low Emitting Materials 3/4 <br />Detailed Rating</p> <p>Criteria Met</p> <p>Compliance</p> <p>100%</p> <p>see below</p> <p>¡</p> <p>100%</p> <p>N/A</p> <p>¡</p> <p>General Information <br />No. <br />Product name <br />MONOFLEX-XL <br />A1 MONOFLEX-XL</p> <p>Manufacturer <br />SCHOMBURG <br />GmbH & Co. KG <br />SCHOMBURG <br />GmbH & Co. KG</p> <p>Composite Wood <br />Mass <br />[%]</p> <p>Page: 8</p> <p>Reference: L15-312 / 11.11.2016</p> <p>Product Declaration - LEED® v4 Building Design and Major Renovations</p> <p>EQ Credit 2: Low Emitting Materials 4/4 <br />Detailed Rating</p> <p>Criteria Met</p> <p>Compliance</p> <p>100%</p> <p>see below</p> <p>¡</p> <p>100%</p> <p>N/A</p> <p>¡</p> <p>General Information <br />No. <br />Product name <br />MONOFLEX-XL <br />A1 MONOFLEX-XL</p> <p>Manufacturer <br />SCHOMBURG <br />GmbH & Co. KG <br />SCHOMBURG <br />GmbH & Co. KG</p> <p>Furniture <br />Mass <br />[%]</p> <p>Page: 9</p> <p>Reference: L15-312 / 11.11.2016</p> <p>Product Declaration - LEED® v4 Building Design and Major Renovations</p> <p>Location Valuation Factor <br />Information <br />Several credits in the MR section include a location valuation factor, which adds value to locally produced products and materials. The intent is to incentivize the purchase of products <br />that support the local economy. Products and materials that are extracted, manufactured, and purchased within 100 miles (160 kilometers) of the project are valued at 200 % of their <br />cost. For a product to qualify for the location valuation factor, it must meet two conditions: all extraction, manufacture, and purchase (including distribution) of the product and its <br />materials must occur within that radius, and the product (or portion of an assembled product) must meet at least one of the sustainable criteria (e.g. FSC certification, recycled content) <br />specified in the credit. Products and materials that do not meet the location criteria but do meet at least one of the sustainability criteria are valued 100 % of their cost (i.e. the valuation <br />factor is 1). <br />The distance must be measured as the crow flies, not by actual travel distance. The point of purchase is considered the location of the purchase transaction. For online or other <br />transactions that do not occur in person, the point of purchase is considered the location of product distribution. <br />Detailed Rating <br />General Information <br />No. <br />Product name <br />MONOFLEX-XL <br />A1 MONOFLEX-XL</p> <p>Manufacturer <br />SCHOMBURG <br />GmbH & Co. KG <br />SCHOMBURG <br />GmbH & Co. KG</p> <p>Location <br />Mass <br />[%]</p> <p>Extraction</p> <p>100% <br />100%</p> <p>Manufacture</p> <p>Purchase (including distribution)</p> <p>Double weighting depends on building site <br />not specified</p> <p>D-32760 Detmold / D-06116 Halle</p> <p>not specified</p> <p>Page: 10</p> <p>Reference: L15-312 / 11.11.2016</p> <p>Product Declaration - LEED® v4 Building Design and Major Renovations</p> <p>Notice: <br />This declaration is a product of HOINKA GmbH. This data sheet is published in the online database greenbuildingproducts.eu. The data sheet is only valid as LEED evidence in <br />conjunction with the manufacturer's declarations and product certificates that prove the information given in this declaration. This declaration is no official certificate in terms of LEED. <br />The contents are based on manufacturer specifications. In spite of a diligent treatment of all information HOINKA GmbH cannot guarantee the actuality or correctness of the published <br />data. The interpretation of the LEED criteria requirements can differ and depend on the project and the scope of application. In spite of a diligent treatment of all information HOINKA <br />GmbH cannot guarantee the correctness of evaluation in terms of the LEED requirements. The user of this declaration, the consumer of the product and the consultant/planner, who is <br />advising this product in any construction projects, is responsible by himself to proof all data published in this document and to verify the permissibility for the designated application. The <br />content of this data sheet does not manifest any legal relationship. With the publication of a new edition, this declaration can no longer be considered to be valid. The latest version is <br />available in the internet.</p> <p>Contact: <br />HOINKA GmbH - greenbuildingprodcuts.eu <br />Nobelstraße 15 <br />D-70569 Stuttgart <br />Tel. +49 711 62049-340 <br />Fax +49 711 62049-349 <br />www.greenbuildingproducts.eu <br />contact@greenbuildingproducts.eu <br />Imprint: <br />HOINKA GmbH - greenbuildingprodcuts.eu <br />Lembergweg 7/1 <br />D-71067 Sindelfingen <br />CEO: Dipl.-Ing. Thomas Hoinka <br />Page: 11</p>
