SCHOMBURG GmbH & Co. KG Aquafinstrasse 2–8 D-32760 Detmold (Germany) phone +49-5231-953-00 fax +49-5231-953-108 email export@schomburg.de www.schomburg.com
Technical Drawing 1.70.8
Waterproofing on non-crack-prone substrates with subsequent floor levelling for mechanically stressed areas
67 8 5 9 10
1 GOK
20cm
2
11 12 3
4
1 Borehole barrier AQUAFIN-F or AQUAFIN-i380 2 If necessary, pulp liner in 2/2 cm grooves and apply stiff plastic ASOCRET-M30 3 Apply a capillary-breaking joint sealant with ASODUR-SG2-thix and quartz sand of 0.1‒0.6 mm grain size, followed by the formation of the sealing fillet 4 Prime the floor surfaces and 20 cm in the wall-sole area with ASODUR-SG2-thix; Afterwards, the primer must be sanded with quartz sand with a grain size of 0.5‒1.0 mm 5 (Optionally, for break-outs > 5 mm, prepare a subfloor levelling with ASOCRET-M30) 6 Waterproofing exposed, load-bearing wall surfaces with AQUAFIN-1K; After curing, apply a second or, if necessary, a third coat of AQUAFIN-1K 7 Waterproof the wall surfaces with AQUAFIN-RB400 8 Waterproof the wall surfaces with AQUAFIN-RB400 9 Apply splatterdash coat with THERMOPAL-SP 10 Plaster wall surfaces with THERMOPAL-ULTRA; A fine filler with THERMOPAL-FS33 is optionally available as a final coat 11 Set edging strip (RD-SK50) 12 Install floor levelling compound for mechanically stressed areas ASOCRET-HFF
Please notice the current technical data sheets. You can find them at: www.schomburg.com
The rights of the buyer with regard to the quality of our materials are based on our terms and conditions of sale and delivery. This description is a non-binding sample description. It does not claim to be complete. This description does not release the user from their duty of care. This version becomes invalid in the event of a new version being issued. 11/22 AC/tet/KK