ASO-Tape_206427_Englisch.pdf
4 页数
381.3 KB
Download
<h1>ASO-Tape_206427_Englisch.pdf</h1> <p>Technical data sheet <br />ASO®-Tape <br />Thermoplastic joint tape for waterproofing construction and movement joints</p> <p>Material number</p> <p>Length</p> <p>Width, article</p> <p>Material thickness</p> <p>Packaging</p> <p>Colour</p> <p>206427002</p> <p>20 m</p> <p>20 cm</p> <p>approx. 1 mm</p> <p>Roll</p> <p>Grey</p> <p>206427004</p> <p>20 m</p> <p>30 cm</p> <p>approx. 1 mm</p> <p>Roll</p> <p>Grey</p> <p>206427007</p> <p>20 m</p> <p>20 cm</p> <p>approx. 2 mm</p> <p>Roll</p> <p>Grey</p> <p>206427009</p> <p>20 m</p> <p>30 cm</p> <p>approx. 2 mm</p> <p>Roll</p> <p>Grey</p> <p>206427010</p> <p>20 m</p> <p>50 cm</p> <p>approx. 2 mm</p> <p>Roll</p> <p>Grey</p> <p>Fields of application / waterproofing <br />For waterproofing construction and movement joints in concrete structures <br />For waterproofing cracks and voids in concrete structures <br />System component of ASODUR®-K4031</p> <p>Product features <br />Highly flexible <br />Frost resistant <br />UV and ageing-resistant</p> <p>Advantages <br />Easy, homogeneous weldability <br />Watertight even under negative water pressure <br />Application without primer also on matt damp substrates</p> <p>SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com <br />1/4</p> <p>04/06/2025</p> <p>Technical data sheet <br />ASO®-Tape <br />Technical Data <br />Material properties <br />Product components <br />Base material <br />Surface weight <br />Values in accordance with material thickness</p> <p>Roll goods <br />TPE <br />approx. 900 g / m² ± 5% <br />Material thickness</p> <p>1.0mm</p> <p>2.0mm</p> <p>Surface weight (g/m²)</p> <p>approx. 900</p> <p>approx. 1800</p> <p>Tensile strength in accordance <br />with DIN EN ISO 527-3 (N <br />/mm²)</p> <p>approx. 14.0</p> <p>approx. 14.0</p> <p>Elongation at break in <br />approx. 1,000 approx. 1,000 <br />accordance with DIN EN ISO <br />527-3 (%)</p> <p>Sealing against pressing water until <br />Watertightness against negative pressing water <br />Classification of the reaction to fire in accordance with DIN EN 13501-1</p> <p>Tear resistance in accordance <br />DIN 12310-2 (N)</p> <p>approx. 100</p> <p>approx. 200</p> <p>Extension (unbonded area) <br />under sustained load (%)</p> <p>max. 10</p> <p>max. 25</p> <p>5 bar <br />to 5 bar <br />E</p> <p>Application <br />approx. 5 - 35 °C</p> <p>Application temperature</p> <p>Material rate <br />Material consumption rate according to the area of application <br />Material rate of ASODUR-K4031: <br />Consumption in kg/m <br />Package type <br />/material <br />thickness</p> <p>1,0 mm</p> <p>2,0 mm</p> <p>200 mm</p> <p>approx. 1,0</p> <p>approx. 1,5</p> <p>300 mm</p> <p>approx. 1,3</p> <p>approx. 1,8</p> <p>500 mm</p> <p>-</p> <p>approx. 2,4</p> <p>Processing equipment <br />Aids/tools <br />Welding unit with wide nozzle <br />Pressure roller</p> <p>Suitable substrate <br />Concrete</p> <p>Preparing the substrate <br />Requirement for substrate <br />1. Load-bearing <br />2. Clean <br />3. Free of adhesion inhibiting substances</p> <p>SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com <br />2/4</p> <p>04/06/2025</p> <p>Technical data sheet <br />ASO®-Tape <br />Preparing the surface <br />1. The substrate may be matt damp. <br />2. Water puddling is not permissible. <br />3. For substrates other than concrete, the suitability must be checked in advance by carrying out a trial adhesion. <br />4. In the case of strip joint seals, the concrete must have water tight properties. Otherwise, the joint waterproofing must be combined with a suitable <br />area waterproofing.</p> <p>Application <br />Construction joints / strip-form waterproofing <br />1. Apply ASODUR-K4031 at least 1 cm wider than the joint tape on both sides of the joint to be bridged. <br />2. The joint tape is then inserted and meticulously embedded in the adhesive layer with a trowel or pressure roller, with no wrinkles or voids, and <br />trowelled on top with ASODUR-K4031. <br />3. The joint strips must be fully embedded. <br />4. The adhesive and filler layer thickness should not be less than 1 mm each. <br />5. Joint-Tape edges can be glued with an overlap of at least 5 to 10 cm or, alternatively, hot-air welded.</p> <p>Movement joints <br />1. Apply ASODUR-K4031 at least 1 cm wider than the joint tape on both sides of the joint to be bridged. <br />2. The joint tape is then inserted and meticulously embedded in the adhesive layer with a trowel or pressure roller, with no wrinkles or voids, and <br />trowelled on top with ASODUR-K4031. <br />3. To accommodate movements, an unbonded expansion area must be provided in the joint area. <br />4. Movement joints are always applied with 2 mm ASO-Tape and can be laid flush or looped depending on the project. <br />5. Depending on the installation and load situation (e.g. overhead application or negative water pressure), a support or protective structure may be <br />required. <br />6. The adhesive and filler layer thickness should not be less than 1 mm each. <br />7. Seal joint-tape edges with overlap of at least 5 to 10 cm by hot-air welding.</p> <p>Hot air welding <br />1. The joint strips are cut to size for the project (butt or corner joint) and laid on a level substrate. <br />2. Prods are to be overlapped with >5 cm. In case of water pressure > 2 bar, overlap the prods with > 20 cm. <br />3. The overlap area is roughened and cleaned with sandpaper. <br />4. The welding temperature (reference values: approx. +300 °C to +350 °C) must be set by a test weld. <br />5. Place the joint strip prods on top of each other to fit and fix them in place by spot welding in the edge area. This prevents slippage during <br />welding. <br />6. Then the wide nozzle of the hot air tool is pulled slowly and evenly through the overlap area and joined together to ensure coverage over the <br />whole area with the pressure roller. <br />7. Before installation, the welds must be checked again for a complete, tight bond.</p> <p>Storage conditions <br />Storage <br />Cool, dry, protected from sunlight. Min. 12 months in the original canister.</p> <p>Disposal <br />Product leftovers can be disposed of in household waste.</p> <p>Notes <br />Unlike Hypalon joint sealing tape strips, ASO-Tape does not need to be additionally activated and must not be brought into contact with <br />solvents. <br />The joint tape must be protected against mechanical damage by suitable protective measures. <br />With negative water pressures > 0.5 bar, a suitable support structure (apron plate) is essential.</p> <p>Relevant regulations <br />The recognised standards of construction engineering, the relevant guidelines and current regulations <br />must be observed. <br />Observe applicable safety data sheet!</p> <p>SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com <br />3/4</p> <p>04/06/2025</p> <p>Technical data sheet <br />ASO®-Tape <br />Explanations <br />Conformity / Declaration / Verification</p> <p>Chemical durability <br />The chemical resistance after 7 days storage at <br />+22 °C exists in the following chemicals:</p> <p>Concentration</p> <p>Hydrochloric acid</p> <p>3%</p> <p>Sulphuric acid</p> <p>35 %</p> <p>Citric acid</p> <p>100,0 g/l</p> <p>Lactic acid</p> <p>5%</p> <p>Caustic potash</p> <p>20 %</p> <p>Sodium hydroxide</p> <p>0,3 g/l</p> <p>Seawater</p> <p>20,0 g/l</p> <p>The rights of the buyer with regard to the quality of our materials are based on our terms and conditions of sale and delivery. Our technical advice team will be happy to advise you <br />in the case of requirements that exceed the scope of the application described here. In order to be binding, a legally binding written confirmation is required. The product description <br />does not release the user from a duty of care. Lay a test area in the event of uncertainty. This version becomes invalid in the event of a new version being issued.</p> <p>SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com <br />4/4</p> <p>04/06/2025</p>
