ASO-PG_207302_Englisch.pdf
3 页数
819.0 KB
Download
<h1>ASO-PG_207302_Englisch.pdf</h1> <p>Technical data sheet <br />ASO®-PG <br />Armoured fabric</p> <p>Material number Length</p> <p>Width, article</p> <p>Material thickness Contents</p> <p>Unit of quantity</p> <p>Packaging</p> <p>Colour</p> <p>207302001</p> <p>100 cm</p> <p>approx. 1 mm</p> <p>ST</p> <p>Roll</p> <p>Red</p> <p>25 m</p> <p>1</p> <p>Areas of application <br />as non-static reinforcement of levelling compounds <br />as a reinforcing fabric in self-levelling levelling compounds, stable levelling compounds and tile adhesives <br />as reinforcement of substrates <br />for crack suppression and reinforcing fabric over channels cut out for floor heating systems <br />as non-static reinforcement in SOLOPLAN-30-PLUS on pressure-stable bound fill <br />to increase the flexural rigidity in combination with SOLOPLAN-30-PLUS on wooden substrates <br />For walls and floors <br />for heated and unheated substrates <br />for interior and exterior use</p> <p>Product features <br />stabilised substrates <br />increased flexural strength of levelling layers <br />reduces tensions <br />crack inhibiting</p> <p>Advantages <br />strengthens existing substrates <br />protects against cracking in tiles and natural stone coverings <br />for the creation of thin-layer floor constructions <br />reduces crack widths <br />resistant to alkalinity and water</p> <p>SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com <br />1/3</p> <p>11/08/2025</p> <p>Technical data sheet <br />ASO®-PG <br />Technical Data <br />Material properties <br />Product components <br />Base material <br />Surface weight <br />Mesh width <br />Tensile strength <br />Distension</p> <p>Roll goods <br />E-glass roving <br />approx. 540 g/m² <br />approx. 6.4mm x 4.9mm <br />after ISO 4606:1995 5300 N/5 cm (warp) <br />after ISO 4606:1995 9000 N/5 cm (weft) <br />after ISO 4606:1995 <5%</p> <p>Application <br />Substrate/application temperature <br />Consumption</p> <p>approx. 5 - 25 °C <br />Approx. 1.1 m² per m²</p> <p>Suitable substrate <br />Cement-based plaster, gypsum plaster, cement-lime plaster, lightweight plaster <br />Tile bearing elements, gypsum fibre boards, gypsum boards, raised floors, cement and fibre cement boards, dry screeds <br />Wood materials <br />Firmly adhering tiled finishes <br />Concrete, cement screed (CT), floor levelling compounds, calcium sulphate screeds (CA, CAF), mastic asphalt screeds (AS), magnesia <br />screeds (MA) <br />Masonry work</p> <p>Preparing the substrate <br />Requirement for substrate <br />1. Dry <br />2. Load-bearing <br />3. Free from negative pressing water <br />4. Free of adhesion inhibiting substances <br />5. rigid and free from vibrations</p> <p>Preparing the surface <br />1. Check the substrate and determine the residual moisture content using the CM method. <br />2. Remove impurities, adhesion-reducing substances and binder accumulations/laitance layers. <br />3. Prime absorbent substrates with ASO-Unigrund-GE, ASO-Unigrund-K or ASO-Unigrund-PLUS. <br />4. Prime non-absorbent substrates with ASO-Unigrund-S or ASO-Unigrund-PLUS.</p> <p>Application <br />Laid on wooden substrates or bound fill (vertical surface load ≤ 2.0 kN/m², point load ≤ 2.0 kN in accordance with DIN EN <br />1991-1) <br />1. Prepare the substrate according to the substrate requirements. <br />2. Apply the RD-SK50 self-adhesive edging strips to the wall-floor transition and the rising building components in advance. <br />3. Cut to fit ASO-PG. Overlap the joint areas by at least 10 cm and place them on the substrate. <br />4. Pour SOLOPLAN-30-PLUS over ASO-PG. Check height and levelness of surface. Observe the minimum dry layer thickness of 15 mm on wooden <br />substrates and 25 mm on bound fill of the SOLOPLAN-30-PLUS. <br />5. Tiles and boards can be laid as soon as SOLOPLAN-30-PLUS is walkable. Decouple constructions on wooden substrates with SANIFIN-EKB.</p> <p>SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com <br />2/3</p> <p>11/08/2025</p> <p>Technical data sheet <br />ASO®-PG <br />As a reinforcing layer <br />1. Prepare the substrate according to the substrate requirements. <br />2. Cut to fit ASO-PG. <br />3. Apply SCHOMBURG tile adhesive or SOLOCRET-60 levelling compound to the substrate using a notched trowel (8 mm). <br />4. Mix ASO-PG into the fresh SCHOMBURG tile adhesive or the stable levelling compound SOLOCRET-60. The joint area must overlap by at <br />least 10cm. <br />5. Apply ASO-PG using a flat trowel. <br />6. Tiles and boards can be laid as soon as the SCHOMBURG tile adhesive or SOLOCRET-60 is walkable according to the relevant TM.</p> <p>As a reinforcing layer <br />1. Prepare the substrate according to the substrate requirements. <br />2. Cut to fit ASO®-PG. <br />3. Apply SCHOMBURG tile adhesive or SOLOCRET®-60 levelling compound to the substrate using a notched trowel (8 mm). <br />4. Mix ASO®-PG into the fresh SCHOMBURG tile adhesive or the stable levelling compound SOLOCRET®-60. The joint area must overlap by at <br />least 10cm. <br />5. Apply ASO®-PG using a flat trowel. <br />6. Tiles and boards can be laid as soon as the SCHOMBURG tile adhesive or SOLOCRET®-60 is walkable according to the relevant TM.</p> <p>Notes <br />Requirements for the constructions, the necessary compressive and flexural strengths, static properties and other criteria must be checked, <br />planned and specified by a planner before work begins. <br />Installation can be carried out on ‘green’ calcium sulphate screeds up to a residual moisture content of max. 1.2 CM-% in combination with <br />the primer ASO-Unigrund-PLUS and the tile adhesive MONOFLEX-S2. <br />Planar substrates such as wooden beam constructions must be firmly screwed. <br />Direct contact with metals such as copper, zinc, and aluminium must be avoided by means of a pore sealed primer. A pore-sealed primer is <br />produced via 2 application steps using ASODUR-GBM (see technical data sheet). <br />Border, field and movement joints should be carried over to the designated location; suitable means such as RD-SK50 edging strips should <br />be used to detach them! Crack control joints must be closed with a force fit or secured against height differences. <br />Observe the technical data sheets of the products mentioned and the laying instructions from the surface coating’s manufacturer! <br />Protect surfaces that are not to be treated from the effects of the system adhesive or the bonded waterproof systems! <br />ASO-PG may not be glued or overcoated afterwards with products containing solvents.</p> <p>Relevant regulations <br />Planning, inspection of substrates and building site circumstances, laying, grouting and subsequent <br />care of the work must be done in accordance with the relevant DIN standards and recognised rules of <br />technology (e.g. the ZDB Data sheets of the Zentralverband Deutsches Baugewerbe e.V.(German <br />construction Association) in the latest version.</p> <p>The rights of the buyer with regard to the quality of our materials are based on our terms and conditions of sale and delivery. Our technical advice team will be happy to advise you <br />in the case of requirements that exceed the scope of the application described here. In order to be binding, a legally binding written confirmation is required. The product description <br />does not release the user from a duty of care. Lay a test area in the event of uncertainty. This version becomes invalid in the event of a new version being issued.</p> <p>SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com <br />3/3</p> <p>11/08/2025</p>
