ASO-Dichtband-2000_205936_Englisch.pdf
5 页数
358.1 KB
Download
<h1>ASO-Dichtband-2000_205936_Englisch.pdf</h1> <p>Technical data sheet <br />ASO®-Dichtband-2000 <br />Joint sealing tape for high requirements</p> <p>Material number</p> <p>Length</p> <p>Width, article</p> <p>Material thickness</p> <p>Packaging</p> <p>Colour</p> <p>205936001</p> <p>10 m</p> <p>120 mm</p> <p>approx. 0.37 mm</p> <p>Roll</p> <p>White with <br />SCHOMBURG logo</p> <p>205936002</p> <p>50 m</p> <p>120 mm</p> <p>approx. 0.37 mm</p> <p>Roll</p> <p>White with <br />SCHOMBURG logo</p> <p>205936003</p> <p>10 m</p> <p>200 mm</p> <p>approx. 0.37 mm</p> <p>Roll</p> <p>White with <br />SCHOMBURG logo</p> <p>205936004</p> <p>50 m</p> <p>200 mm</p> <p>approx. 0.37 mm</p> <p>Roll</p> <p>White with <br />SCHOMBURG logo</p> <p>Areas of use/bonded waterproofing <br />for reliable waterproofing and integration of expansion, movement and edge connecting joints in bonded waterproofing <br />as a system component for bonded waterproofing for water impact class W0-I to W3-I in accordance with DIN 18534 and W1-B and W2B in accordance with DIN 18535 Part 3</p> <p>Product features <br />Fleece-laminated joint sealing tape <br />Tear-resistant <br />Highly flexible and stretchy <br />Extra thin <br />Highly resistant <br />Crack bridging</p> <p>Advantages <br />Tested system product <br />Particularly thin layers</p> <p>Existing test certificates <br />EMICODE licence <br />French cert. VOC <br />AgBB certificate</p> <p>SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com <br />1/5</p> <p>28/05/2025</p> <p>Technical data sheet <br />ASO®-Dichtband-2000 <br />Technical Data <br />Material properties <br />Product components <br />Base material <br />Weight <br />Burst pressure <br />Reaction to fire in accordance with DIN EN 4102 <br />UV-resistance after DIN EN ISO 4892-2 <br />Tensile force, lengthwise in accordance with DIN 527-3 <br />Tensile force, crosswise in accordance with DIN 527-3 <br />Expansion, lengthwise (DIN EN ISO 527-3) <br />Expansion, crosswise (DIN EN ISO 527-3) <br />Sealing against pressing water until <br />Sd-value in accordance with DIN EN 1931</p> <p>Roll goods <br />Composite material: Fleece-membrane-fleece <br />approx. 150 - 190 g / m² <br />≥ 2 bar <br />B2 <br />500 hours <br />approx. 50 N / 15 mm <br />approx. 32 N / 15 mm <br />approx. 60 % <br />approx. 60 % <br />1.5 bar <br />> 30 m ± 5 m</p> <p>Temperature resistance <br />Vapour diffusion behaviour <br />Permissible movement accommodation <br />Classification of the reaction to fire in accordance with DIN EN 13501-1</p> <p>- 22 + 90 °C <br />Vapour diffusion-inhibiting <br />max. 30 % <br />E</p> <p>Application <br />Consumption</p> <p>approx. 1 m per m</p> <p>System components in accordance with AbP AIV <br />Joint Sealing tape</p> <p>ASO-Dichtband-2000-Ecken (Innen und Aussen) <br />ASO-Dichtmanschette-Boden <br />ASO-Dichtmanschette-Wand</p> <p>Processing equipment <br />Aids/tools <br />Serrated or layer-thickness trowel <br />Flat trowel <br />Brush <br />Pressure roller <br />Scissors/knife</p> <p>Suitable substrate <br />Dry screeds <br />Raised floors <br />Tile bearing elements <br />Firmly adhering tiled finishes <br />Concrete, cement screed (CT), floor levelling compounds, calcium sulphate screeds (CA, CAF), mastic asphalt screeds (AS), magnesia <br />screeds (MA) <br />Cement-based plaster, gypsum plaster, cement-lime plaster, lightweight plaster <br />Bonded waterproofing; the suitability of the substrate must be checked and observed, taking into account the planned water exposure class <br />of DIN 18534, DIN 18535 and DIN 18531.</p> <p>SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com <br />2/5</p> <p>28/05/2025</p> <p>Technical data sheet <br />ASO®-Dichtband-2000 <br />Preparing the substrate <br />Requirement for substrate <br />1. Dry <br />2. Load-bearing <br />3. Even <br />4. Sealed in the surface <br />5. Free of cracks <br />6. Free from negative pressing water <br />7. Free of adhesion inhibiting substances</p> <p>Measures for substrate preparation <br />Instructions for substrate preparation can be found in the technical data sheet of the selected sealing material.</p> <p>Application <br />Application <br />1. Apply the waterproofing material to both sides of the joint or wall transition to be bridged, at least 2 cm wider than the joint sealing tape that is <br />used (e.g. using a 4–6 mm notched trowel). <br />2. Press the ASO®-Dichtband-2000 into the waterproofing layer meticulously without voids or wrinkles, using a flat trowel or pressure roller. <br />3. Press in the joint sealing tape in the waterproofing layer meticulously without voids or wrinkles, using a flat trowel or pressure roller. <br />4. If a liquid waterproofing membrane is used, apply the second layer of waterproofing membrane on top of the connecting waterproofing tape. <br />5. Bond joint-tape edges or connections with the waterproofing material without wrinkles, covering the whole area, and overcoat after. <br />6. Joint-tape edges or connections to pre-formed pieces are applied with an overlap of at least 5 cm. <br />7. For structural movement joints, ASO®-Dichtband-2000 is inserted into the joint and the fresh layer in the form of a loop.</p> <p>Storage conditions <br />Storage <br />Cool, dry, protected from sunlight. Min. 36 months in the original canister.</p> <p>Disposal <br />Product leftovers can be disposed of in household waste.</p> <p>Emission behaviour / building certification systems <br />Very low emissions in accordance with GEV-EMICODE, which normally results in positive evaluations within the scope of building <br />certification systems in accordance with DGNB, LEED, BREEAM, HQE. <br />Maximum quality level 4, lines 9, 35, 44 in accordance with DGNB criteria "ENV 1.2 Risks to the local environment".</p> <p>Notes <br />ASO®-Dichtband-2000 may not be glued or overcoated afterwards with products containing solvents. <br />Joints that are secured with ASO®-Dichtband-2000 must be adequately protected against mechanical damage! <br />Remove adhesive strips from any existing interfaces of the joint tape roll. Establish the connection area overlapping. <br />Border, field, building separation and movement joints should be carried over to or installed at the designated location; suitable means (e.g. <br />edge strips) should be used to detach them! <br />-</p> <p>Relevant regulations <br />Planning, inspection of substrates and building site circumstances, laying, grouting and subsequent <br />care of the work must be done in accordance with the relevant DIN standards and recognised rules of <br />technology (e.g. the ZDB Data sheets of the Zentralverband Deutsches Baugewerbe e.V.(German <br />construction Association) in the latest version.</p> <p>SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com <br />3/5</p> <p>28/05/2025</p> <p>Technical data sheet <br />ASO®-Dichtband-2000 <br />Explanations <br />System components in accordance with PG-AIV-F <br />System components</p> <p>Exposure classes in accordance with testing principles of DIBt <br />PG-AIV-F, wear class:</p> <p>In accordance with PG-MDS</p> <p>A</p> <p>B</p> <p>Waterproofing of buildings</p> <p>Water impact classes in <br />accordance with DIN 18534 part <br />3 and ZDB data sheet (*1) W0-I <br />to W3-I (without chemical <br />exposure)</p> <p>Water impact classes in <br />accordance with DIN 18535 part <br />3, W1-B W2-B</p> <p>ASO-Dichtband-2000</p> <p>x</p> <p>x</p> <p>-</p> <p>ASO-Dichtband-2000-Ecken, <br />(90°, innen/außen)</p> <p>x</p> <p>x</p> <p>-</p> <p>ASO-Dichtband-2000-S-Ecken, <br />(90°, innen/außen)</p> <p>x</p> <p>x</p> <p>x</p> <p>ASO-Dichtmanschette-Boden/Wand</p> <p>x</p> <p>x</p> <p>x</p> <p>ADF-Rohrmanschette</p> <p>-</p> <p>-</p> <p>x</p> <p>ADF-Dehnfugenband</p> <p>-</p> <p>-</p> <p>x</p> <p>ASO-Dichtband-120</p> <p>x</p> <p>-</p> <p>-</p> <p>ASO-Dichtmanschette-W</p> <p>x</p> <p>-</p> <p>-</p> <p>ASO-Dichtecke-I/-A</p> <p>x</p> <p>-</p> <p>-</p> <p>ASO-Gefälleecke</p> <p>x</p> <p>-</p> <p>-</p> <p>ASO-Dichtmanschette-B</p> <p>x</p> <p>-</p> <p>-</p> <p>UNIFIX-S3</p> <p>x</p> <p>x</p> <p>-</p> <p>MONOFLEX-white</p> <p>x</p> <p>x</p> <p>-</p> <p>MONOFLEX-white modified with <br />UNIFLEX-F in a mass ratio of 3:1</p> <p>x</p> <p>x</p> <p>-</p> <p>LIGHTFLEX</p> <p>x</p> <p>x</p> <p>-</p> <p>MONOFLEX</p> <p>x</p> <p>x</p> <p>-</p> <p>MONOFLEX-XL</p> <p>x</p> <p>x</p> <p>-</p> <p>MONOFLEX-fast</p> <p>x</p> <p>-</p> <p>-</p> <p>MONOFLEX-FB</p> <p>x</p> <p>x</p> <p>-</p> <p>ASODUR-EKF</p> <p>x</p> <p>x</p> <p>-</p> <p>CRISTALLFUGE-EPOX</p> <p>x</p> <p>x</p> <p>-</p> <p>SOLOFLEX</p> <p>x</p> <p>x</p> <p>-</p> <p>AK7P</p> <p>x</p> <p>x</p> <p>-</p> <p>CRISTALLIT-FLEX</p> <p>x</p> <p>-</p> <p>-</p> <p>UNIFIX-S3-fast</p> <p>x</p> <p>-</p> <p>-</p> <p>AQUAFIN-RS300</p> <p>x</p> <p>x</p> <p>x</p> <p>SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com <br />4/5</p> <p>28/05/2025</p> <p>Technical data sheet <br />ASO®-Dichtband-2000 <br />Conformity / Declaration / Verification</p> <p>Chemical durability <br />Test fluid</p> <p>Concentration</p> <p>(≤ 8 hours) <br />low resistance</p> <p>(≤ 72 hours) <br />medium resistance</p> <p>(≤ 14 days) <br />high resistance</p> <p>Inorganic acids <br />Hydrochloric acid</p> <p>0,03%</p> <p>X</p> <p>Sulphuric acid</p> <p>0,35%</p> <p>X</p> <p>Citric acid</p> <p>100 g/l</p> <p>X</p> <p>Lactic acid</p> <p>20</p> <p>X</p> <p>Caustic potash</p> <p>0,2 %</p> <p>X</p> <p>Sodium hydroxide</p> <p>0,3 g/l</p> <p>X</p> <p>Salt water</p> <p>20 g/l Sea salt</p> <p>X</p> <p>Organic acids</p> <p>Alkalis</p> <p>The rights of the buyer with regard to the quality of our materials are based on our terms and conditions of sale and delivery. Our technical advice team will be happy to advise you <br />in the case of requirements that exceed the scope of the application described here. In order to be binding, a legally binding written confirmation is required. The product description <br />does not release the user from a duty of care. Lay a test area in the event of uncertainty. This version becomes invalid in the event of a new version being issued.</p> <p>SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com <br />5/5</p> <p>28/05/2025</p>
