AQUAFIN-i380_204610_Englisch.pdf
3 页数
867.6 KB
Download
<h1>AQUAFIN-i380_204610_Englisch.pdf</h1> <p>Technical data sheet <br />AQUAFIN®-i380 <br />Injection cream for subsequent horizontal barriers</p> <p>Material number</p> <p>Package type</p> <p>Colour</p> <p>Units / pallet</p> <p>Pc/package</p> <p>204610003</p> <p>5 l, pail</p> <p>White</p> <p>65,000</p> <p>1,000</p> <p>204610004</p> <p>550ml tubular bag</p> <p>White</p> <p>288,000</p> <p>6,000</p> <p>Fields of application / waterproofing <br />As a subsequent horizontal barrier against rising dampness in masonry work <br />Suitable for all common types of masonry</p> <p>Product features <br />Vapour permeable <br />Ready to use <br />Tested and certified in accordance with WTA relevant guidelines up to 95% moisture penetration <br />hydrophobic <br />Solvent free</p> <p>Advantages <br />Easy and safe to use <br />Low consumption <br />High penetration depth <br />Very high active ingredient content <br />Prevents capillary water transport <br />No uncontrolled drainage <br />Pressureless application</p> <p>Technical Data <br />Material properties <br />Product components <br />Base material <br />Consistency <br />Density (spec. weight)</p> <p>Ready to use <br />Silane <br />Paste, creamy <br />approx. 0.9 g/cm³</p> <p>Application <br />Substrate/application temperature</p> <p>approx. 5 - 30 °C</p> <p>SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com <br />1/3</p> <p>21/05/2026</p> <p>Technical data sheet <br />AQUAFIN®-i380 <br />Material rate <br />Material consumption rate according to the area of application <br />Consumption AQUAFIN-i380 <br />Drill hole diameter: 12 mm; <br />Drill hole depth = masonry thickness - 2 cm <br />Drill hole spacing 12.5 cm; horizontal arrangement <br />Wall thickness</p> <p>Drill hole depth</p> <p>Filling quantity per <br />drill hole</p> <p>Consumption per <br />linear metre</p> <p>Yield per 550 ml</p> <p>11,5 cm</p> <p>approx. 9,5 cm</p> <p>approx. 11 ml</p> <p>approx. 88 ml</p> <p>approx. 6,4 m</p> <p>24,0 cm</p> <p>approx. 22,0 cm</p> <p>approx. 25 ml</p> <p>approx. 200 ml</p> <p>approx. 2,8 m</p> <p>36,0 cm</p> <p>approx. 34,0 cm</p> <p>approx. 38 ml</p> <p>approx. 304 ml</p> <p>approx. 1,8 m</p> <p>42,0 cm</p> <p>approx. 40,0 cm</p> <p>approx. 45 ml</p> <p>approx. 360 ml</p> <p>approx. 1,5 m</p> <p>Processing equipment <br />Aids/tools <br />Electro-pneumatic drill <br />Cartridge gun <br />Suitable injection equipment <br />Injection packer</p> <p>Preparing the substrate <br />Measures for substrate preparation <br />1. Remove old, damaged plasters, paints or coatings from the substrate up to 80 cm above the visible damaged area or the area delimited through <br />inspections. <br />2. Masonry work with larger voids, chamber stones, cracks or open joints must be pressed out with ASOCRET-BM before drilling holes. <br />3. Scrape out crumbly masonry joints approx. 2 cm deep and clean the surfaces mechanically. <br />4. For the repair of surface irregularities and masonry joints, we recommend THERMOPAL®-GP11 or ASOCRET-M30.</p> <p>Application <br />Creation of drill holes <br />1. The drill hole spacing and the arrangement of the drill holes (1-row or 2-row) depends on the absorbency of the masonry work. <br />2. The drill holes are drilled with a diameter of ≥ 12 mm at intervals of approx. 10-12.5 cm. The injection holes should preferably be drilled <br />horizontally, always starting from a masonry joint. <br />3. The drill hole depth is approx. 2 cm less than the masonry thickness. <br />4. For low or non-absorbent substrates, it is recommended to arrange the drill holes in two levels in the joint area. The height offset should be <8 cm. <br />5. The drill holes must be cleaned of drilling dust by blowing them out</p> <p>Pressureless injection - implementation <br />1. Slowly pressing and simultaneously pulling out the injection hose ensures that the drilled holes are filled completely with AQUAFIN®-i380. <br />2. After applying the injection cream, seal the drill holes on the surface with ASOCRET-M30.</p> <p>Storage conditions <br />Storage <br />Store in a frost-free, cool and dry place. 12 months in the original canister. Promptly use opened container.</p> <p>Notes <br />Protect surfaces that are not to be treated from the effects of AQUAFIN®-i380! <br />The material is not suitable for hydrophobic action on alkaline surfaces, e.g. concrete components, etc. <br />The basis of the renovation procedure is the WTA technical data sheet 4-10 Masonry work injection against capillary moisture. Preliminary <br />investigations (e.g. moisture balance, salt analysis) are generally required. <br />For wall thicknesses over 60 cm, we recommend double-sided injection with AQUAFIN®-i380 or pressure injection.</p> <p>Observe applicable safety data sheet!</p> <p>SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com <br />2/3</p> <p>21/05/2026</p> <p>Technical data sheet <br />AQUAFIN®-i380</p> <p>The rights of the buyer with regard to the quality of our materials are based on our terms and conditions of sale and delivery. Our technical advice team will be happy to advise you <br />in the case of requirements that exceed the scope of the application described here. In order to be binding, a legally binding written confirmation is required. The product description <br />does not release the user from a duty of care. Lay a test area in the event of uncertainty. This version becomes invalid in the event of a new version being issued.</p> <p>SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com <br />3/3</p> <p>21/05/2026</p>
