SOLOPLAN-30-PLUS EMICODE_GB.pdf
2 页数
227.7 KB
Download
<h1>SOLOPLAN-30-PLUS EMICODE_GB.pdf</h1> <p>Licence Number:</p> <p>6975/09.03.00</p> <p>For the product</p> <p>SOLOPLAN-30 Plus</p> <p>Of company</p> <p>Schomburg GmbH & Co. KG</p> <p>Due to application date</p> <p>May 11, 2016</p> <p>With reference to the classification in accordance with the directives as <br />stipulated in § 10 of the GEV trademark constitution <br />on behalf of the GEV for the above mentioned product as per § 5, section 4 of the <br />GEV trademark constitution is awarded the licence for the use of the GEV <br />trademark</p> <p>This product meets with the guidelines for the criteria of use listed reverse. <br />The company is ordinary member of the GEV.</p> <p>OM 023 <br />May 18, 2021 <br />valid until May 18, 2026</p> <p>Requirement guidelines for the awarding of the EMICODE licence <br />The product mentioned on the front side of the licence has to fulfil among others the following criteria in <br />accordance with the Constitution and the guidelines of the Technical Advisory Board of the GEV: <br />• The product meets all the legal requirements, especially the chemical laws and their specifications. <br />• The product is solvent free as specified in clause 2.4 of the “GEV Classification Criteria”, except if it <br />is a surface treatment product. If the product is assigned to a GISCODE product group then this <br />can be labelled. <br />• A safety data sheet (SDS) according to local law in its respectively valid version is issued for the <br />product. <br />• Carcinogenic, mutagenic, reprotoxic substances of the categories 1A or 1B are not added during <br />the manufacture of the product. <br />• The testing of the product is performed in accordance with the GEV Testing Method. VOC <br />determination is performed in a test chamber followed by the Tenax / thermal desorption <br />procedures with subsequent GC/MS analysis. <br />• The assignment of an EMICODE class is performed according to the following criteria and <br />TVOC/TSVOC concentration levels. The corresponding EMICODE class shall be used to label the <br />product: <br />1) Installation products, adhesives and construction products</p> <p>Parameter</p> <p>EC 1PLUS</p> <p>EC 1</p> <p>EC 2</p> <p>max. allowed concentration [µg/m³]</p> <p>TVOC after 3 days</p> <p>< 750</p> <p>< 1000</p> <p>< 3000</p> <p>TVOC after 28 days</p> <p>< 60</p> <p>< 100</p> <p>< 300</p> <p>TSVOC after 28 days <br />R value based on German AgBB LCI <br />(NIK) after 28 days <br />Sum of non-assessable VOC</p> <p>< 40</p> <p>< 50</p> <p>< 100</p> <p>1</p> <p>-</p> <p>-</p> <p>< 40</p> <p>-</p> <p>-</p> <p>Formaldehyde after 3 days</p> <p>< 50</p> <p>< 50</p> <p>< 50</p> <p>Acetaldehyde after 3 days</p> <p>< 50</p> <p>< 50</p> <p>< 50</p> <p>< 0.05 ppm</p> <p>< 0.05 ppm</p> <p>< 0.05 ppm</p> <p>< 10</p> <p>< 10</p> <p>< 10</p> <p><1</p> <p><1</p> <p><1</p> <p>Sum of form- and acetaldehyde <br />Sum of volatile C1A/C1B after <br />3 days <br />Any volatile C1A/C1B after <br />28 days</p> <p>2) Products for floor surface treatments for parquet, mineral floors and resilient floorings <br />Parameter</p> <p>EC 1PLUS</p> <p>EC 1</p> <p>EC 2</p> <p>max. allowed concentration [µg/m³] <br />≤ 100 <br />thereof max. <br />40 SVOC</p> <p>< 150 <br />thereof max. <br />50 SVOC</p> <p>< 450 <br />thereof max. <br />100 SVOC</p> <p>Formaldehyde after 3 days</p> <p>< 50</p> <p>< 50</p> <p>< 50</p> <p>Acetaldehyde after 3 days <br />Any volatile C1A/C1B after <br />3 days <br />Any volatile C1A/C1B after <br />28 days</p> <p>< 50</p> <p>< 50</p> <p>< 50</p> <p>< 10</p> <p>< 10</p> <p>< 10</p> <p><1</p> <p><1</p> <p><1</p> <p>Sum TVOC + TSVOC after 28 days</p> <p>Edition: 04.10.2017</p>
