SDS_SOLOFLEX-fast_-_205439_(16)EN_GB.pdf
8 页数
206.8 KB
Download
<h1>SDS_SOLOFLEX-fast_-_205439_(16)EN_GB.pdf</h1> <p>62.0.18</p> <p>Page 1/8</p> <p>Safety data sheet <br />according to UK REACH <br />Printing date 20.04.2026</p> <p>Version number 16 (replaces version 15)</p> <p>Revision: 20.04.2026</p> <p>SECTION 1: Identification of the substance/mixture and of the company/undertaking <br />· 1.1 Product identifier <br />· Trade name: SOLOFLEX-fast <br />· UFI: 72Q0-8052-E008-UUJP <br />· 1.2 Relevant identified uses of the substance or mixture and uses advised against <br />No further relevant information available. <br />· Application of the substance / the mixture Tile adhesive <br />· 1.3 Details of the supplier of the safety data sheet <br />· Manufacturer/Supplier: <br />SCHOMBURG GmbH & Co. KG <br />Aquafinstr. 2-8 <br />D-32760 Detmold <br />Detmold, Germany <br />---------------------------------------------Tel: ++49 (0)5231/953-00 <br />Fax: ++49 (0)5231/953-123 <br />Internet: www.schomburg.de <br />· Informing department: <br />Department: Environment and Safety <br />************************************ <br />If you have any questions about the Environment and Safety Department, please contact our <br />department. <br />e-mail: SDB@schomburg.de <br />· 1.4 Emergency telephone number: <br />Poison centre Berlin (24 hours) <br />German & English <br />Tel: ++49 (0)30/30686700 <br />SECTION 2: Hazards identification <br />· 2.1 Classification of the substance or mixture <br />· Classification according to Regulation (EC) No 1272/2008 <br />GHS05 corrosion <br />Eye Dam. 1 H318 Causes serious eye damage. <br />GHS07 <br />Skin Irrit. 2 H315 Causes skin irritation. <br />STOT SE 3 H335 May cause respiratory irritation. <br />· 2.2 Label elements <br />· Labelling according to Regulation (EC) No 1272/2008 <br />The product is classified and labelled according to the GB CLP regulation. <br />· Hazard pictograms GHS05, GHS07 <br />· Signal word Danger <br />· Hazard-determining components of labelling: <br />calcium sulfoaluminate cement <br />(Contd. on page 2) <br />GB</p> <p>62.0.18</p> <p>Page 2/8</p> <p>Safety data sheet <br />according to UK REACH <br />Printing date 20.04.2026</p> <p>Version number 16 (replaces version 15)</p> <p>Revision: 20.04.2026</p> <p>Trade name: SOLOFLEX-fast <br />(Contd. of page 1)</p> <p>· Hazard statements <br />H315 Causes skin irritation. <br />H318 Causes serious eye damage. <br />H335 May cause respiratory irritation. <br />· Precautionary statements <br />P261 <br />Avoid breathing dust/fume/gas/mist/vapours/spray. <br />P280 <br />Wear protective gloves / eye protection / face protection. <br />P304+P340 <br />IF INHALED: Remove person to fresh air and keep comfortable for breathing. <br />P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact <br />lenses, if present and easy to do. Continue rinsing. <br />P405 <br />Store locked up. <br />P501 <br />Dispose of contents/container in accordance with local/regional/national/ <br />international regulations. <br />· 2.3 Other hazards <br />With moisture, the dry product forms a highly alkaline solution that can irritate the skin and eyes. <br />Prolonged contact with the moist mortar can cause serious eye and skin damage. <br />· Results of PBT and vPvB assessment <br />· PBT: Not applicable <br />· vPvB: Not applicable <br />· Determination of endocrine-disrupting properties Not applicable <br />SECTION 3: Composition/information on ingredients <br />· 3.2 Mixtures <br />· Description: <br />Combination with special cement and additives. <br />Product based on cement and mineral filler. <br />· Dangerous components: <br />EC number: 934-133-9 calcium sulfoaluminate cement <br />10-25% <br />Eye Dam. 1, H318; <br />Skin Irrit. 2, H315; STOT SE 3, H335 <br />· Additional information <br />The chromate content in the cement is less than 2 ppm, so that the classification with H317 or <br />EUH203 is not applicable (see 1907/2006/EC, Annex XVII (47)). <br />For the wording of the listed hazard phrases refer to section 16. <br />SECTION 4: First aid measures <br />· 4.1 Description of first aid measures <br />· General information <br />Symptoms of poisoning may even occur after several hours; therefore medical observation for at <br />least 48 hours after the accident. <br />Personal protection for the First Aider. <br />It is possible to choke in case of vomiting in unconsciousness. <br />Bring unconscious persons into a stable position on side. <br />Keep the respiratory tract free (remove dentures and vomiting). <br />Check the pulse. In case of heart failure you have to make a cardiac massage. In case of stoppage <br />of breathing: artificial respiration. <br />Take up a doctor immediately! <br />· After inhalation <br />Supply fresh air or oxygen; call for doctor. <br />Remove people from the dust-laden area. <br />· After skin contact <br />In case of contact with skin, remove mechanically, wash thoroughly with plenty of soap and water. <br />Instantly wash with water and soap and rinse thoroughly. <br />Don't use solvents to clean the skin. <br />(Contd. on page 3) <br />GB</p> <p>62.0.18</p> <p>Page 3/8</p> <p>Safety data sheet <br />according to UK REACH <br />Printing date 20.04.2026</p> <p>Version number 16 (replaces version 15)</p> <p>Revision: 20.04.2026</p> <p>Trade name: SOLOFLEX-fast <br />(Contd. of page 2)</p> <p>· After eye contact <br />Gently rinse the eyes under running water for at least 10 minutes with the eyelids open. If possible, <br />remove any contact lenses and continue rinsing. Consult a doctor. <br />· After swallowing <br />Show the packaging or the label to the doctor. <br />Drink copious amounts of water. Avert vomiting. Instantly call for doctor. <br />· 4.2 Most important symptoms and effects, both acute and delayed <br />No further relevant information available. <br />· 4.3 Indication of any immediate medical attention and special treatment needed <br />No further relevant information available. <br />SECTION 5: Firefighting measures <br />· 5.1 Extinguishing media <br />· Suitable extinguishing agents <br />Product is not inflammable. <br />Use fire fighting measures that suit the environment. <br />· 5.2 Special hazards arising from the substance or mixture <br />No further relevant information available. <br />· 5.3 Advice for firefighters <br />· Protective equipment: Wear self-contained breathing apparatus. <br />· Additional information <br />Dispose of fire debris and contaminated fire fighting water in accordance with official regulations. <br />Follow the emergency-plan. <br />SECTION 6: Accidental release measures <br />· 6.1 Personal precautions, protective equipment and emergency procedures <br />Avoid causing dust. <br />Avoid eye- and skin contact. <br />Bring persons out of danger. <br />Wear protective equipment. Keep unprotected persons away. <br />Wear protective clothing. <br />· 6.2 Environmental precautions: <br />Do not allow product to reach sewage system or water bodies. <br />Inform respective authorities in case product reaches water or sewage system. <br />· 6.3 Methods and material for containment and cleaning up: <br />Ensure adequate ventilation. <br />Pick up the product mechanically, avoid dust formation. <br />· 6.4 Reference to other sections <br />See Section 7 for information on safe handling <br />See Section 8 for information on personal protection equipment. <br />See Section 13 for information on disposal. <br />SECTION 7: Handling and storage <br />· 7.1 Precautions for safe handling <br />Keep away from heat and direct sunlight. <br />Ensure good ventilation/extraction at the workplace. <br />Prevent formation of dust. <br />Keep out of the reach of children <br />For personal protection equipment, see section 8. <br />Pick up spilt material dry, avoid stirring up, protect against drifting with tarpaulin if necessary. Keep <br />drop height low when decanting. Do not use compressed air. Use a suitable industrial vacuum <br />cleaner/dust extractor of dust class M (DIN EN 60335-2-69) for cleaning. Wear a respirator (min. <br />FFP2) in case of dust formation. Avoid skin contact and inhalation of dust. Allow mixed product to <br />harden and dispose of in accordance with section 13. <br />(Contd. on page 4) <br />GB</p> <p>62.0.18</p> <p>Page 4/8</p> <p>Safety data sheet <br />according to UK REACH <br />Printing date 20.04.2026</p> <p>Version number 16 (replaces version 15)</p> <p>Revision: 20.04.2026</p> <p>Trade name: SOLOFLEX-fast <br />(Contd. of page 3)</p> <p>· Information about protection against explosions and fires: No special measures required. <br />· 7.2 Conditions for safe storage, including any incompatibilities <br />· Storage <br />· Requirements to be met by storerooms and containers: <br />Store only in the original container. <br />Protect against wetness and water. <br />Store in a dry place. <br />· Information about storage in one common storage facility: <br />Please follow the rules of the VCI-Storage-Concept for chemicals. <br />· Further information about storage conditions: <br />Keep container tightly sealed. <br />Store in cool, dry conditions in well sealed containers. <br />Store in a locked cabinet and out of the reach of children. <br />Low in chromate. Shelf life of the chromate reducer under dry and cool storage: 12 months. Batch: <br />Filling month corresponds to 1st/2nd digit. Year of filling corresponds to 3rd/4th digit. <br />· 7.3 Specific end use(s) No further relevant information available. <br />SECTION 8: Exposure controls/personal protection <br />· 8.1 Control parameters <br />· Components with critical values that require monitoring at the workplace: <br />1317-65-3 Calcium carbonat (25-50%) <br />WEL Long-term value: 10* 4** mg/m³ <br />*inhalable dust; **respirable <br />· Regulatory information WEL: EH40/2020 <br />· Additional information: The lists that were valid during the compilation were used as basis. <br />· 8.2 Exposure controls <br />· Appropriate engineering controls <br />It must be possible to wash the skin in the working area. <br />Eye-wash bottle must be available. <br />· Individual protection measures, such as personal protective equipment <br />· General protective and hygienic measures <br />The usual precautionary measures should be adhered to in handling the chemicals. <br />Keep away from foodstuffs, beverages and food. <br />Instantly remove any soiled and impregnated garments. <br />Vacuum clean contaminated clothing. Do not blow or brush off contamination. <br />Avoid contact with the eyes and skin. <br />Do not eat, drink or smoke while working. <br />Use skin protection cream for preventive skin protection. <br />Be sure to clean skin thoroughly after work and before breaks. <br />· Breathing equipment: <br />Use respiratory protective equipment at formation of dust. <br />For work with higher dust loads: Particle filter class P2 <br />· Hand protection <br />In case of wearing synthetic protective gloves use cotton-gloves as underwear. <br />The glove material has to be impermeable and resistant to the product/ the substance/ the <br />preparation. <br />Selection of the glove material on consideration of the penetration times, rates of diffusion and the <br />degradation <br />· Material of gloves <br />Nitrile rubber, NBR <br />Nitrile-soaked cotton gloves (layer thickness approx. 0.15 mm) <br />For activities using products containing cement, suitable protective gloves have been identified <br />(GISCODES ZP1). Suitable are, for example <br />Ampri: SolidSafety Cut 081101 / SolidSafety Tough 081201 / SolidSafetyTough Dots 081202 <br />Ansell: Flexitril L27 / Fleximax 27 or 35 / Hylite / Nitrotough N210 / Sol-Knit <br />KCL: Sahara / Gobi / Nitex <br />(Contd. on page 5) <br />GB</p> <p>62.0.18</p> <p>Page 5/8</p> <p>Safety data sheet <br />according to UK REACH <br />Printing date 20.04.2026</p> <p>Version number 16 (replaces version 15)</p> <p>Revision: 20.04.2026</p> <p>Trade name: SOLOFLEX-fast <br />(Contd. of page 4)</p> <p>MAPA: Duo-Mix 405 / Enduro 328 / Stansolv AK 22 / Titanlite 397 / Titansuperlite <br />UVEX: uvex Profi Ergo XG 20 / uvex phynomic pro <br />The selection of the suitable gloves does not only depend on the material, but also on further marks <br />of quality and varies from manufacturer to manufacturer. As the product is a preparation of several <br />substances, the resistance of the glove material can not be calculated in advance and has therefore <br />to be checked prior to the application. <br />· Penetration time of glove material <br />The exact break trough time has to be found out by the manufacturer of the protective gloves and <br />has to be observed. <br />· For the permanent contact in work areas without heightened risk of injury (e.g. Laboratory) <br />gloves made of the following material are suitable: <br />Nitrile rubber, NBR <br />· Not suitable are gloves made of the following materials: <br />Leather gloves. <br />Gloves made of thick fabric. <br />· Eye/face protection Suitable safety goggles in accordance with DIN EN 166. <br />· Body protection: Protective work clothing. <br />· Skin protection Use greasy skin protection ointment for all uncovered parts of the body! <br />SECTION 9: Physical and chemical properties <br />· 9.1 Information on basic physical and chemical properties <br />· General Information <br />· Physical state <br />Firm <br />· Colour: <br />Grey <br />· Smell: <br />Weak, characteristic <br />· Odour threshold: <br />Not determined <br />· Melting point/freezing point: <br />Not determined <br />· Boiling point or initial boiling point and <br />boiling range <br />not apply <br />· Flammability <br />Not determined <br />· Lower and upper explosion limit <br />· Lower: <br />Not determined <br />· Upper: <br />Not determined <br />· Flash point: <br />Not applicable <br />· Decomposition temperature: <br />Not determined <br />· pH at 20 °C <br />10.3 (1%) <br />· Viscosity: <br />· Kinematic viscosity <br />Not applicable <br />· dynamic: <br />Not applicable <br />· Solubility <br />· Water: <br />miscible <br />· Partition coefficient n-octanol/water (log <br />value) <br />Not determined <br />· Steam pressure: <br />Not applicable <br />· Density and/or relative density <br />· Density <br />bulk density <br />· Relative density <br />Not determined <br />· Settled apparent density <br />1.35 kg/dm³ <br />· Vapour density <br />Not applicable <br />· 9.2 Other information <br />· Appearance: <br />· Form: <br />Powder <br />· Important information on protection of health <br />and environment, and on safety. <br />· Self-inflammability: <br />Product is not selfigniting. <br />(Contd. on page 6) <br />GB</p> <p>62.0.18</p> <p>Page 6/8</p> <p>Safety data sheet <br />according to UK REACH <br />Printing date 20.04.2026</p> <p>Version number 16 (replaces version 15)</p> <p>Revision: 20.04.2026</p> <p>Trade name: SOLOFLEX-fast <br />(Contd. of page 5)</p> <p>· Explosive properties: <br />· Change in condition <br />· Evaporation rate <br />· Information with regard to physical hazard <br />classes <br />· Explosives <br />· Flammable gases <br />· Aerosols <br />· Oxidising gases <br />· Gases under pressure <br />· Flammable liquids <br />· Flammable solids <br />· Self-reactive substances and mixtures <br />· Pyrophoric liquids <br />· Pyrophoric solids <br />· Self-heating substances and mixtures <br />· Substances and mixtures, which emit <br />flammable gases in contact with water <br />· Oxidising liquids <br />· Oxidising solids <br />· Organic peroxides <br />· Corrosive to metals <br />· Desensitised explosives</p> <p>Product is not explosive. <br />Not applicable.</p> <p>Void <br />Void <br />Void <br />Void <br />Void <br />Void <br />Void <br />Void <br />Void <br />Void <br />Void <br />Void <br />Void <br />Void <br />Void <br />Void <br />Void</p> <p>SECTION 10: Stability and reactivity <br />· 10.1 Reactivity No further relevant information available. <br />· 10.2 Chemical stability <br />· Thermal decomposition / conditions to be avoided: <br />No decomposition if used according to specifications. <br />· 10.3 Possibility of hazardous reactions No dangerous reactions known <br />· 10.4 Conditions to avoid No further relevant information available. <br />· 10.5 Incompatible materials: No further relevant information available. <br />· 10.6 Hazardous decomposition products: No dangerous decomposition products known <br />SECTION 11: Toxicological information <br />· 11.1 Information on hazard classes as defined in Regulation (EC) No 1272/2008 <br />· Acute toxicity Based on available data, the classification criteria are not met. <br />· LD/LC50 values that are relevant for classification: <br />calcium sulfoaluminate cement <br />Dermal LD50 >2,000 mg/kg (rabbit) <br />· Primary irritant effect: <br />· Skin corrosion/irritation <br />The product has an irritate-effect. <br />Causes skin irritation. <br />· Serious eye damage/irritation Causes serious eye damage. <br />· STOT-single exposure May cause respiratory irritation. <br />· 11.2 Information on other hazards <br />· Endocrine disrupting properties <br />None of the ingredients is listed. <br />GB</p> <p>(Contd. on page 7)</p> <p>62.0.18</p> <p>Page 7/8</p> <p>Safety data sheet <br />according to UK REACH <br />Printing date 20.04.2026</p> <p>Version number 16 (replaces version 15)</p> <p>Revision: 20.04.2026</p> <p>Trade name: SOLOFLEX-fast <br />(Contd. of page 6)</p> <p>SECTION 12: Ecological information <br />· 12.1 Toxicity <br />· Aquatic toxicity: No further relevant information available. <br />· 12.2 Persistence and degradability No further relevant information available. <br />· 12.3 Bioaccumulative potential No further relevant information available. <br />· 12.4 Mobility in soil No further relevant information available. <br />· 12.5 Results of PBT and vPvB assessment <br />· PBT: Not applicable <br />· vPvB: Not applicable <br />· 12.6 Endocrine disrupting properties <br />The product does not contain substances with endocrine disrupting properties. <br />· 12.7 Other adverse effects <br />· Additional ecological information: <br />· General notes: Water hazard class 1 (Self-assessment): slightly hazardous for water. <br />SECTION 13: Disposal considerations <br />· 13.1 Waste treatment methods <br />· Recommendation <br />Must not be disposed of together with household garbage. Do not allow product to reach sewage <br />system. <br />· Uncleaned packagings: <br />· Recommendation: Disposal must be made according to official regulations. <br />· Recommended cleaning agent: Water, if necessary with cleaning agent. <br />*</p> <p>SECTION 14: Transport information <br />· 14.1 UN number or ID number <br />· ADR, IMDG, IATA</p> <p>Void</p> <p>· 14.2 UN proper shipping name <br />· ADR, ADN, IMDG, IATA</p> <p>Void</p> <p>· 14.3 Transport hazard class(es) <br />· ADR, ADN, IMDG, IATA <br />· Class</p> <p>Void</p> <p>· 14.4 Packing group <br />· ADR, IMDG, IATA</p> <p>Void</p> <p>· 14.5 Environmental hazards: <br />· Marine pollutant:</p> <p>No</p> <p>· 14.6 Special precautions for user</p> <p>Not applicable</p> <p>· 14.7 Maritime transport in bulk according to <br />IMO instruments <br />Not applicable <br />· UN "Model Regulation":</p> <p>Void <br />GB</p> <p>(Contd. on page 8)</p> <p>62.0.18</p> <p>Page 8/8</p> <p>Safety data sheet <br />according to UK REACH <br />Printing date 20.04.2026</p> <p>Version number 16 (replaces version 15)</p> <p>Revision: 20.04.2026</p> <p>Trade name: SOLOFLEX-fast <br />(Contd. of page 7)</p> <p>SECTION 15: Regulatory information <br />· 15.1 Safety, health and environmental regulations/legislation specific for the substance or <br />mixture <br />· Poisons Act <br />· Regulated explosives precursors <br />None of the ingredients is listed. <br />· Regulated poisons <br />None of the ingredients is listed. <br />· Reportable explosives precursors <br />None of the ingredients is listed. <br />· Reportable poisons <br />None of the ingredients is listed. <br />· Directive 2012/18/EU <br />· Named dangerous substances - ANNEX I None of the ingredients is listed. <br />· 15.2 Chemical safety assessment: A Chemical Safety Assessment has not been carried out. <br />SECTION 16: Other information <br />These data are based on our present knowledge. However, they shall not constitute a guarantee for <br />any specific product features and shall not establish a legally valid contractual relationship. <br />· Relevant phrases <br />H315 Causes skin irritation. <br />H318 Causes serious eye damage. <br />H335 May cause respiratory irritation. <br />· Department issuing data specification sheet: Environment protection department. <br />· Abbreviations and acronyms: <br />ADR: Accord relatif au transport international des marchandises dangereuses par route (European Agreement Concerning <br />the International Carriage of Dangerous Goods by Road) <br />IMDG: International Maritime Code for Dangerous Goods <br />IATA: International Air Transport Association <br />GHS: Globally Harmonised System of Classification and Labelling of Chemicals <br />EINECS: European Inventory of Existing Commercial Chemical Substances <br />ELINCS: European List of Notified Chemical Substances <br />CAS: Chemical Abstracts Service (division of the American Chemical Society) <br />LC50: Lethal concentration, 50 percent <br />LD50: Lethal dose, 50 percent <br />PBT: Persistent, Bioaccumulative and Toxic <br />vPvB: very Persistent and very Bioaccumulative <br />Skin Irrit. 2: Skin corrosion/irritation – Category 2 <br />Eye Dam. 1: Serious eye damage/eye irritation – Category 1 <br />STOT SE 3: Specific target organ toxicity (single exposure) – Category 3</p> <p>· * Data compared to the previous version altered. <br />GB</p>
