Reinit_BM_(5)EN.pdf
6 页数
58.4 KB
Download
<h1>Reinit_BM_(5)EN.pdf</h1> <p>42.0</p> <p>Page 1/6</p> <p>Safety data sheet <br />according to 1907/2006/EC, Article 31 <br />Printing date 13.05.2016 <br />*</p> <p>Version number 5</p> <p>Revision: 12.05.2016</p> <p>SECTION 1: Identification of the substance/mixture and of the company/undertaking <br />· 1.1 Product identifier <br />· Trade name: Reinit BM <br />· Article number: 406303 <br />· 1.2 Relevant identified uses of the substance or mixture and uses advised against <br />No further relevant information available. <br />· Application of the substance / the mixture Concrete/Mortar admixtures <br />· 1.3 Details of the supplier of the safety data sheet <br />· Manufacturer/Supplier: <br />SCHOMBURG GmbH & Co. KG <br />Aquafinstr. 2-8 <br />D-32760 Detmold <br />Germany <br />---------------------------------------------Tel: ++49 (0)5231/953-00 <br />Fax: ++49 (0)5231/953-123 <br />email: info@schomburg.de <br />web: www.schomburg.de <br />· Informing department: <br />Product Safety Department <br />Tel: ++49 (0)5231/953-193 <br />Fax: ++49 (0)5231/953-106 <br />email: guido.herfort@schomburg.de <br />SECTION 2: Hazards identification <br />· 2.1 Classification of the substance or mixture <br />· Classification according to Regulation (EC) No 1272/2008 <br />The product is not classified according to the CLP regulation. <br />· 2.2 Label elements <br />· Labelling according to Regulation (EC) No 1272/2008 Void <br />· Hazard pictograms Void <br />· Signal word Void <br />· Hazard statements Void <br />· 2.3 Other hazards <br />· Results of PBT and vPvB assessment <br />· PBT: Not applicable. <br />· vPvB: Not applicable. <br />SECTION 3: Composition/information on ingredients <br />· 3.2 Chemical characterisation: Mixtures <br />· Description: Preparation, contains paraffinic and naphtenic hydrocarbons. <br />· Dangerous components: Void <br />· Additional information For the wording of the listed risk phrases refer to section 16.</p> <p>*</p> <p>SECTION 4: First aid measures <br />· 4.1 Description of first aid measures <br />· General information Personal protection for the First Aider. <br />· After inhalation Supply fresh air or oxygen; call for doctor. <br />· After skin contact <br />Change immediately heavy contaminated clothes. <br />(Contd. on page 2) <br />GB</p> <p>42.0</p> <p>Page 2/6</p> <p>Safety data sheet <br />according to 1907/2006/EC, Article 31 <br />Printing date 13.05.2016</p> <p>Version number 5</p> <p>Revision: 12.05.2016</p> <p>Trade name: Reinit BM <br />(Contd. of page 1)</p> <p>Wash with water and soap. <br />· After eye contact Rinse opened eye for several minutes under running water. <br />· After swallowing <br />Drink copious amounts of water and provide fresh air. Instantly call for doctor. <br />Show the pack or the label to the doctor. <br />· 4.2 Most important symptoms and effects, both acute and delayed <br />No further relevant information available. <br />· 4.3 Indication of any immediate medical attention and special treatment needed <br />No further relevant information available. <br />*</p> <p>SECTION 5: Firefighting measures <br />· 5.1 Extinguishing media <br />· Suitable extinguishing agents Water spray jet <br />· For safety reasons unsuitable extinguishing agents Water with a full water jet. <br />· 5.2 Special hazards arising from the substance or mixture <br />No further relevant information available. <br />· 5.3 Advice for firefighters <br />· Protective equipment: <br />Wear full protective suit. <br />Wear self-contained breathing apparatus. <br />· Additional information <br />Follow the emergency-plan. <br />Burst- and explosion-danger by increaseing pressure. <br />In case of fire chill the container with water spray. <br />SECTION 6: Accidental release measures <br />· 6.1 Personal precautions, protective equipment and emergency procedures <br />Avoid eye- and skin contact. <br />Bring persons out of danger. <br />Wear protective equipment. Keep unprotected persons away. <br />· 6.2 Environmental precautions: Do not allow product to reach sewage system or water bodies. <br />· 6.3 Methods and material for containment and cleaning up: <br />Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust). <br />Ensure adequate ventilation. <br />· 6.4 Reference to other sections <br />See Section 7 for information on safe handling <br />See Section 8 for information on personal protection equipment. <br />See Section 13 for information on disposal. <br />SECTION 7: Handling and storage <br />· 7.1 Precautions for safe handling <br />Ensure good ventilation/exhaustion at the workplace. <br />Prevent formation of aerosols. <br />Keep away from children. <br />· Information about protection against explosions and fires: No special measures required. <br />· 7.2 Conditions for safe storage, including any incompatibilities <br />· Storage <br />· Requirements to be met by storerooms and containers: No special requirements. <br />· Information about storage in one common storage facility: <br />Store away from oxidising agents. <br />Please follow the rules of the VCI-Storage-Concept for chemicals. <br />· Further information about storage conditions: None. <br />(Contd. on page 3) <br />GB</p> <p>42.0</p> <p>Page 3/6</p> <p>Safety data sheet <br />according to 1907/2006/EC, Article 31 <br />Printing date 13.05.2016</p> <p>Version number 5</p> <p>Revision: 12.05.2016</p> <p>Trade name: Reinit BM <br />(Contd. of page 2)</p> <p>· 7.3 Specific end use(s) No further relevant information available. <br />*</p> <p>SECTION 8: Exposure controls/personal protection <br />· Additional information about design of technical systems: <br />It must be possible to wash the skin in the working area. <br />Eye-wash bottle must be available. <br />· 8.1 Control parameters <br />· Components with critical values that require monitoring at the workplace: <br />The product does not contain any relevant quantities of materials with critical values that have to be <br />monitored at the workplace. <br />· Additional information: The lists that were valid during the compilation were used as basis. <br />· 8.2 Exposure controls <br />· Personal protective equipment <br />· General protective and hygienic measures <br />The usual precautionary measures should be adhered to in handling the chemicals. <br />Do not inhale gases / fumes / aerosols. <br />Avoid contact with eyes and skin. Change clothes which heavy contaminate with the product. <br />· Breathing equipment: Not required. <br />· Protection of hands: Hand Protection: Nitril-rubber-latex-gloves. <br />· Material of gloves <br />Butyl rubber II R: Thickness ≥ 0,5mm; Break through time ≥ 480 min <br />· Penetration time of glove material <br />The exact break trough time has to be found out by the manufacturer of the protective gloves and <br />has to be observed. <br />· Eye protection: Safety glasses <br />· Body protection: Protective work clothing.</p> <p>*</p> <p>SECTION 9: Physical and chemical properties <br />· 9.1 Information on basic physical and chemical properties <br />· General Information <br />· Appearance: <br />Form: <br />Fluid <br />Colour: <br />Light yellow <br />· Smell: <br />Characteristic <br />· Odour threshold: <br />Not determined. <br />· pH-value:</p> <p>Not determined.</p> <p>· Change in condition <br />Melting point/Melting range: <br />Boiling point/Boiling range:</p> <p>Not determined <br />Not determined</p> <p>· Flash point:</p> <p>155 °C</p> <p>· Inflammability (solid, gaseous)</p> <p>Not applicable.</p> <p>· Ignition temperature: <br />Decomposition temperature:</p> <p>Not determined.</p> <p>· Self-inflammability:</p> <p>Product is not selfigniting.</p> <p>· Danger of explosion:</p> <p>Product is not explosive.</p> <p>· Critical values for explosion: <br />Lower:</p> <p>Not determined. <br />(Contd. on page 4) <br />GB</p> <p>42.0</p> <p>Page 4/6</p> <p>Safety data sheet <br />according to 1907/2006/EC, Article 31 <br />Printing date 13.05.2016</p> <p>Version number 5</p> <p>Revision: 12.05.2016</p> <p>Trade name: Reinit BM <br />(Contd. of page 3)</p> <p>Upper:</p> <p>Not determined.</p> <p>· Steam pressure:</p> <p>Not determined.</p> <p>· Density at 20 °C <br />· Relative density <br />· Vapour density <br />· Evaporation rate</p> <p>0,891 g/cm³ <br />Not determined. <br />Not determined. <br />Not determined.</p> <p>· Solubility in / Miscibility with <br />Water:</p> <p>Not miscible or difficult to mix</p> <p>· Partition coefficient (n-octanol/water): Not determined. <br />· Viscosity: <br />dynamic at 20 °C: <br />kinematic: <br />· 9.2 Other information</p> <p>*</p> <p>20 mPas <br />Not determined. <br />No further relevant information available.</p> <p>SECTION 10: Stability and reactivity <br />· 10.1 Reactivity No further relevant information available. <br />· 10.2 Chemical stability <br />· Thermal decomposition / conditions to be avoided: <br />No decomposition if used according to specifications. <br />· 10.3 Possibility of hazardous reactions Reacts with strong oxidizing agents <br />· 10.4 Conditions to avoid No further relevant information available. <br />· 10.5 Incompatible materials: Strong oxidationresorts <br />· 10.6 Hazardous decomposition products: No dangerous decomposition products known</p> <p>*</p> <p>SECTION 11: Toxicological information <br />· 11.1 Information on toxicological effects <br />· Acute toxicity Based on available data, the classification criteria are not met. <br />· LD/LC50 values that are relevant for classification: <br />64742-53-6 Distillates (petroleum), hydrotreated light naphthenic <br />Oral <br />LD50 > 5000 mg/kg (rats) <br />Dermal LD50 > 5000 mg/kg (rabbit) <br />· Primary irritant effect: No irritant action known. <br />· Skin corrosion/irritation Based on available data, the classification criteria are not met. <br />· Serious eye damage/irritation Based on available data, the classification criteria are not met. <br />· Respiratory or skin sensitisation No sensibility by skincontact. <br />· Other information (about experimental toxicology): <br />Inhalation of vapours and haze may cause irritations. <br />· CMR effects (carcinogenity, mutagenicity and toxicity for reproduction) <br />· Germ cell mutagenicity Based on available data, the classification criteria are not met. <br />· Carcinogenicity Based on available data, the classification criteria are not met. <br />· Reproductive toxicity Based on available data, the classification criteria are not met. <br />· STOT-single exposure Based on available data, the classification criteria are not met. <br />· STOT-repeated exposure Based on available data, the classification criteria are not met. <br />· Aspiration hazard Based on available data, the classification criteria are not met.</p> <p>*</p> <p>SECTION 12: Ecological information <br />· 12.1 Toxicity <br />· Aquatic toxicity: No further relevant information available. <br />(Contd. on page 5) <br />GB</p> <p>42.0</p> <p>Page 5/6</p> <p>Safety data sheet <br />according to 1907/2006/EC, Article 31 <br />Printing date 13.05.2016</p> <p>Version number 5</p> <p>Revision: 12.05.2016</p> <p>Trade name: Reinit BM <br />(Contd. of page 4)</p> <p>· 12.2 Persistence and degradability <br />The main components are perspectively easily degradable, however, some components are <br />persistent in the environment. <br />· 12.3 Bioaccumulative potential Contains components with potential bioaccumultation. <br />· 12.4 Mobility in soil No further relevant information available. <br />· Ecotoxical effects: <br />· Remark: Practically non-toxic for fish, invertebrate water organisms, algae and microorganisms. <br />· Additional ecological information: <br />· General notes: <br />Water hazard class 1 (Self-assessment): slightly hazardous for water. <br />Do not allow undiluted product or large quantities of it to reach ground water, water bodies or <br />sewage system. <br />· 12.5 Results of PBT and vPvB assessment <br />· PBT: Not applicable. <br />· vPvB: Not applicable. <br />· 12.6 Other adverse effects No further relevant information available. <br />*</p> <p>SECTION 13: Disposal considerations <br />· 13.1 Waste treatment methods <br />· Recommendation <br />Smaller quantities can be disposed with household garbage. <br />Transfer to a permitted waste diposal institution. <br />· European waste catalogue <br />13 00 00 OIL WASTES AND WASTES OF LIQUID FUELS (except edible oils, and those in <br />chapters 05, 12 and 19) <br />13 08 00 oil wastes not otherwise specified <br />13 08 99* wastes not otherwise specified <br />· Uncleaned packagings: <br />· Recommendation: Disposal must be made according to official regulations. <br />SECTION 14: Transport information <br />· 14.1 UN-Number <br />· ADR</p> <p>Void</p> <p>· 14.2 UN proper shipping name <br />· ADR</p> <p>Void</p> <p>· 14.3 Transport hazard class(es) <br />· ADR <br />· Class</p> <p>Void</p> <p>· 14.4 Packing group <br />· ADR</p> <p>Void</p> <p>· 14.5 Environmental hazards: <br />· Marine pollutant:</p> <p>No</p> <p>· 14.6 Special precautions for user</p> <p>Not applicable.</p> <p>· 14.7 Transport in bulk according to Annex II <br />of Marpol and the IBC Code <br />Not applicable. <br />(Contd. on page 6) <br />GB</p> <p>42.0</p> <p>Page 6/6</p> <p>Safety data sheet <br />according to 1907/2006/EC, Article 31 <br />Printing date 13.05.2016</p> <p>Version number 5</p> <p>Revision: 12.05.2016</p> <p>Trade name: Reinit BM <br />(Contd. of page 5)</p> <p>· Transport/Additional information:</p> <p>*</p> <p>Not dangerous according to the above <br />specifications.</p> <p>SECTION 15: Regulatory information <br />· 15.1 Safety, health and environmental regulations/legislation specific for the substance or <br />mixture <br />· National regulations <br />· Water hazard class: <br />Water hazard class 1 (Self-assessment): slightly hazardous for water. <br />The classification based on german instructions. <br />· 15.2 Chemical safety assessment: A Chemical Safety Assessment has not been carried out.</p> <p>*</p> <p>SECTION 16: Other information <br />These data are based on our present knowledge. However, they shall not constitute a guarantee for <br />any specific product features and shall not establish a legally valid contractual relationship. <br />· Department issuing data specification sheet: Environment protection department. <br />· Contact: Mr. Guido Herfort <br />· Abbreviations and acronyms: <br />ADR: Accord européen sur le transport des marchandises dangereuses par Route (European Agreement concerning the <br />International Carriage of Dangerous Goods by Road) <br />GHS: Globally Harmonised System of Classification and Labelling of Chemicals <br />EINECS: European Inventory of Existing Commercial Chemical Substances <br />ELINCS: European List of Notified Chemical Substances <br />CAS: Chemical Abstracts Service (division of the American Chemical Society) <br />LC50: Lethal concentration, 50 percent <br />LD50: Lethal dose, 50 percent <br />PBT: Persistent, Bioaccumulative and Toxic <br />vPvB: very Persistent and very Bioaccumulative</p> <p>· * Data compared to the previous version altered. <br />GB</p>
