Brochure MONOFLEX The S class among tile adhesives EN 3022_Web.pdf
8 页数
1.3 MB
Download
<h1>Brochure MONOFLEX The S class among tile adhesives EN 3022_Web.pdf</h1> <p>Tile / Natural Stone / Screed installation</p> <p>MONOFLEX <br />The S class among tile adhesives <br />The flexible MONOFLEX S1 tile adhesive offers <br />security for all demands with the highest quality standards. <br />Problems Solved.</p> <p>Tile adhesive</p> <p>Flexible tile adhesive: <br />Security for all demands <br />and a reliable installation. <br />The choice of tile adhesive for bonding various ceramic and natural stone <br />tiles depends on the condition of the substrate and the type of tile. In order to <br />prevent damage due to de-bonding from the substrate, stresses must be <br />compensated for and absorbed by the tile adhesive. <br />MONOFLEX S1 tile adhesive offers security for all demands with the highest <br />quality standards. Whether for everyday requirements, for large format tiles <br />or where there are demanding and time constrained challenges, we have a <br />save solution for all eventualities.</p> <p>CLASSIFICATION OF TILE ADHESIVES <br />TO DIN EN 12004 – DEFINITIONS <br />C = cement-based adhesive <br />1 = Adhesive for normal conditions <br />2 = Adhesive with improved properties <br />F = Fast setting adhesive <br />T = Adhesive with reduced slip (Thixotropic) <br />E = Adhesive with extended open time <br />S1 = deformable thin-bed adhesive, <br />S1 deformation 2.5 mm < t < 5 mm</p> <p>schomburg.com</p> <p>MONOFLEX <br />The First-Timer.</p> <p>12 0 0 4</p> <p>ry</p> <p>ve</p> <p>–</p> <p>EN</p> <p>S1 <br />io n</p> <p>DEFLECT</p> <p>–</p> <p>H</p> <p>N <br />IO</p> <p>HIG</p> <p>Flexible tile adhesive S1 <br />The solid All-Rounder offers good performance <br />and impresses with its good application properties.</p> <p>l o w e m iss</p> <p>Properties <br />• Productive. <br />• For large format tiles. <br />• High slump resistance with good application properties. <br />• For underfloor heating. <br />• Interior and exterior. <br />• Wall and floor. <br />• Normal hardening. <br />• Tested to DIN EN 12004, C2 TE S1. <br />• Fulfills the requirements of the AgBB scheme.</p> <p>Technical data <br />Basis</p> <p>Sand, cement, additives <br />(polymer modified)</p> <p>Application/substrate <br />temperature</p> <p>+5 °C to +25 °C</p> <p>Pot life*</p> <p>approx. 2 hours</p> <p>Ready for foot traffic*</p> <p>after approx. 12 hours</p> <p>Ready to grout*</p> <p>after approx. 12 hours</p> <p>Packaging</p> <p>25 kg polythene bag</p> <p>* at +23°C and 50% relative humidity</p> <p>Smooth to apply <br />High comfort level</p> <p>Highly polymer <br />modified <br />Very flexible</p> <p>Material coverage <br />Consumption approx. 1.8 kg/m2 with a 6 mm notched trowel <br />approx. 2.3 kg/m2 with an 8 mm notched trowel <br />approx. 2.8 kg/m2 with a 10 mm notched trowel</p> <p>High slump resistance <br />For the non-slip <br />installation of tiles</p> <p>schomburg.com</p> <p>MONOFLEX-XL <br />The one with the high yield.</p> <p>12 0 0 4</p> <p>TILE <br />ry</p> <p>ve</p> <p>–</p> <p>EN</p> <p>S1 <br />io n</p> <p>DEFLECT</p> <p>–</p> <p>H</p> <p>N <br />IO</p> <p>HIG</p> <p>Flexible, high yield S1 tile adhesive <br />Unites the „more“ in coverage per unit area and excellent <br />application properties.</p> <p>l o w e m iss</p> <p>Properties <br />• High yield. <br />• For large format tiles. <br />• High slump resistance with good application properties. <br />• Very low emissions. <br />• For underfloor heating. <br />• Interior and exterior. <br />• Wall and floor. <br />• Normal hardening. <br />• Fulfills the requirement criteria of the “Flexible adhesive” <br />data sheet. <br />• Tested to DIN EN 12004, C2 TE S1.</p> <p>High yield <br />Up to 35% less <br />consumption</p> <p>Highly polymer <br />modified <br />Very flexible</p> <p>High slump resistance <br />For the non-slip <br />installation of tiles</p> <p>schomburg.com</p> <p>Material coverage <br />Consumption approx. 1.6 kg/m2 with a 6 mm notched trowel <br />approx. 2.1 kg/m2 with an 8 mm notched trowel <br />approx. 2.6 kg/m2 with a 10 mm notched trowel</p> <p>MONOFLEX-FB <br />The sociable one.</p> <p>DEFLECT</p> <p>–</p> <p>EN</p> <p>S1</p> <p>TILE</p> <p>–</p> <p>H</p> <p>N <br />IO</p> <p>HIG</p> <p>Flexible flow-bed adhesive S1 <br />Offers almost void free bedding to floor finishes <br />subjected to high thermal and mechanical stresses.</p> <p>12 0 0 4</p> <p>Properties <br />• Efficient, smooth application. <br />• Accelerated hardening. <br />• Thixotropic, no slumping with large, heavy tiles. <br />• C2 E in accordance with DIN EN 12004. <br />• S1 deformable adhesive to DIN EN 12002. <br />• For interior and exterior. <br />• Fulfills the requirement criteria for the “Flexible adhesive” <br />guidelines.</p> <p>Technical data <br />Basis</p> <p>Aggregate, cement, high quality <br />additives</p> <p>Application/substrate <br />temperature</p> <p>+5 °C to +25 °C</p> <p>Pot life*</p> <p>45 – 50 minutes</p> <p>Ready for foot traffic*</p> <p>after approx. 4 hours</p> <p>Ready to grout*</p> <p>after approx. 6 hours</p> <p>Packaging</p> <p>25 kg polythene bag</p> <p>* at +23°C and 50% relative humidity</p> <p>Smooth to apply <br />High comfort level</p> <p>Highly polymer <br />modified <br />Very flexible</p> <p>Material coverage <br />Consumption approx. 3.4 kg/m2 with an 8 mm notched trowel <br />approx. 4.2 kg/m2 with a 10 mm notched trowel</p> <p>Non-slump <br />No sagging with <br />heavy boards</p> <p>schomburg.com</p> <p>MONOFLEX-white <br />The white one.</p> <p>RCHBIE <br />DU</p> <p>–</p> <p>EN</p> <p>From <br />end of 2022, <br />available <br />in NEW <br />layout</p> <p>S1</p> <p>–</p> <p>NG <br />GU</p> <p>HOHE</p> <p>S1 white flexible tile adhesive <br />White tile adhesive with very good application properties for special demands.</p> <p>12 0 0 4</p> <p>Properties <br />· White. <br />· For large formats. <br />· For underfloor heating. <br />· For indoors and outdoors. <br />· Walls and floors. <br />· Normal-setting. <br />· Tested in accordance with DIN EN 12004, C2 TE S1. <br />· Fulfils AgBB formula requirements.</p> <p>Technical data <br />Basis</p> <p>aggregate, cement, <br />high-quality additives</p> <p>Application/substrate <br />temperature</p> <p>+5 °C to +30 °C</p> <p>Pot life*</p> <p>approx. 2 hours</p> <p>Ready for foot traffic*</p> <p>after approx. 24 hours</p> <p>Ready to grout*</p> <p>after approx. 24 hours minimum</p> <p>Packaging</p> <p>25 kg polythene bag</p> <p>* at +23°C and 50% relative humidity</p> <p>Smooth to apply <br />High comfort level</p> <p>Highly polymer <br />modified <br />Very flexible</p> <p>High slump resistance <br />For the non-slip <br />installation of tiles</p> <p>schomburg.com</p> <p>Material coverage <br />Consumption approx. 2.2 kg/m2 with a 6 mm notched trowel <br />approx. 3.0 kg/m2 with an 8 mm notched trowel <br />approx. 3.6 kg/m2 with a 10 mm notched trowel</p> <p>MONOFLEX-fast <br />Fast-acting. <br />Grey, flexible rapid-setting mortar S1 <br />It has a long working time and open time despite its rapidsetting behaviour.</p> <p>Properties <br />· Grey. <br />· Rapid setting. <br />· Long working time. <br />· For indoors and outdoors. <br />· Rapid crystalline water binding. <br />· Water and frost/thaw cycle resistant <br />· Tested in accordance with DIN EN 12004, C2 TE S1. <br />· Fulfils AgBB formula requirements.</p> <p>Technical data <br />Basis</p> <p>Aggregate, cement, highquality additives</p> <p>Application/ <br />Substrate temperature</p> <p>+5°C to +25°C</p> <p>Pot life*</p> <p>approx. 45 to 60 minutes</p> <p>Foot traffic*</p> <p>after approx. 3 hours</p> <p>Groutable*</p> <p>after approx. 3 hours</p> <p>Packaging</p> <p>25 kg foil bag</p> <p>* at +23 °C and 50 % rel. humidity</p> <p>Smooth to apply <br />High comfort level</p> <p>Highly polymer <br />modified <br />Very flexible</p> <p>High slump resistance <br />For the non-slip <br />installation of tiles</p> <p>Material consumption rate <br />Consumption approx. 2.3 kg/m2 with 6 mm notched trowel <br />approx. 3.1 kg/m2 with 8 mm notched trowel <br />approx. 3.8 kg/m2 with 10 mm notched trowel <br />approx. 5.6 kg/m2 at 12/20 mm <br />semicircular medium bed notched trowel</p> <p>schomburg.com</p> <p>The SCHOMBURG Group develops, produces <br />and markets high quality building product <br />systems for <br />• Waterproofing and Restoration <br />• Tile / Natural Stone / Screed installation <br />• Surface Protection Systems <br />• Concrete Technology <br />SCHOMBURG is recognised for its <br />development competency and is distinguished <br />both nationally and internationally with over <br />80 years in the market. System based <br />construction products from its own production <br />plants are held it high esteem throughout the <br />world. <br />Industry professionals value the level of service <br />provided by the SCHOMBURG Group, along <br />with our large range of high quality products.</p> <p>SCHOMBURG GmbH & Co. KG <br />Aquafinstrasse 2–8 <br />D -32760 Detmold (Germany) <br />phone + 49 - 52 31-953- 00 <br />fax <br />+ 49 - 52 31- 953-108 <br />email export@schomburg.de <br />www.schomburg.com</p> <p>30/22 TS/JD/TET/TaB/SaB Subject to changes. Consult current technical data sheet for most recent information</p> <p>In order to stay at the forefront of a continuously <br />advancing market we are always investing in <br />research and development of new and current <br />products. This guarantees high quality products, <br />which in turn leads to customer satisfaction.</p>
