LIGHTFLEX_Lizenz_EMICODE_GB.pdf
2 页数
403.2 KB
Download
<h1>LIGHTFLEX_Lizenz_EMICODE_GB.pdf</h1> <p>Licence Number:</p> <p>2918/09.03.00</p> <p>For the product</p> <p>LIGHTFLEX</p> <p>Of company</p> <p>Schomburg GmbH & Co. KG</p> <p>Due to application date</p> <p>10.12.2010</p> <p>With reference to the classification in accordance with the directives as <br />stipulated in § 10 of the GEV trademark constitution</p> <p>on behalf of the GEV for the above mentioned product as per § 5, section 4 of the <br />GEV trademark constitution is awarded the licence for the use of the GEV <br />trademark</p> <p>This product meets with the guidelines for the criteria of use listed reverse. <br />The company is ordinary member of the GEV.</p> <p>OM023 <br />10.11.2025 <br />valid until 10.11.2030</p> <p>Requirement guidelines for the awarding of the EMICODE licence <br />The product mentioned on the front side of the licence has to fulfil among others the following criteria in accordance <br />with the Constitution and the guidelines of the Technical Council of the GEV: <br />• The product meets all the legal requirements, especially the chemical laws and their specifications. <br />• The product is solvent free as specified in chapter 2.4 of the “GEV Classification Criteria”, except if it is a surface <br />treatment product. If the product is assigned to a GISCODE product group then this can be labelled. <br />• A safety data sheet (SDS) according to local law in its respectively valid version is issued for the product. <br />• Carcinogenic, mutagenic, reprotoxic substances of the categories 1A or 1B are not actively added to the product <br />during manufacture (for exemptions see chapter 3.1.2.2 of the “GEV Classification Criteria”). <br />• The testing of the product is performed in accordance with the “GEV Testing Method”. VOC determination is <br />performed in a test chamber followed by the Tenax / thermal desorption procedures with subsequent GC/MS <br />analysis. <br />• The assignment of an EMICODE class is performed according to the following criteria and TVOC/TSVOC <br />concentration levels. The corresponding EMICODE class shall be used to label the product:</p> <p>1) Installation products, adhesives and construction products <br />Parameter</p> <p>EC 1PLUS</p> <p>EC 1</p> <p>EC 2</p> <p>max. allowed concentration [µg/m³]</p> <p>TVOC after 3 days</p> <p>≤ 750</p> <p>≤ 1000</p> <p>≤ 3000</p> <p>TVOC after 28 days</p> <p>≤ 60</p> <p>≤ 100</p> <p>≤ 300</p> <p>TSVOC after 28 days <br />R value based on German AgBB LCI (NIK) after 28 <br />days</p> <p>≤ 40</p> <p>≤ 50</p> <p>≤ 100</p> <p>≤1</p> <p>≤1</p> <p>-</p> <p>Sum of non-assessable VOC</p> <p>≤ 40</p> <p>-</p> <p>-</p> <p>Formaldehyde after 3 days</p> <p>≤ 50</p> <p>≤ 50</p> <p>≤ 50</p> <p>Formaldehyde after 28 days</p> <p>≤ 10</p> <p>≤ 10</p> <p>≤ 10</p> <p>Acetaldehyde after 3 days</p> <p>≤ 50</p> <p>≤ 50</p> <p>≤ 50</p> <p>≤ 0.05 ppm</p> <p>≤ 0.05 ppm</p> <p>≤ 0.05 ppm</p> <p>Sum of volatile C1A/C1B after 3 days</p> <p>< 10</p> <p>< 10</p> <p>< 10</p> <p>Any volatile C1A/C1B after 28 days</p> <p><1</p> <p><1</p> <p><1</p> <p>Sum of form- and acetaldehyde</p> <p>2) Products for floor surface treatments for parquet, mineral floors and resilient floorings <br />Parameter</p> <p>EC 1PLUS</p> <p>EC 1</p> <p>EC 2</p> <p>max. allowed concentration [µg/m³] <br />≤ 100 <br />thereof max. <br />40 SVOC</p> <p>< 150 <br />thereof max. <br />50 SVOC</p> <p>< 400 <br />thereof max. <br />100 SVOC</p> <p>R value based on German AgBB LCI (NIK) after 28 <br />days</p> <p>≤1</p> <p>≤1</p> <p>-</p> <p>Sum of non-assessable VOC</p> <p>≤ 40</p> <p>-</p> <p>-</p> <p>Formaldehyde after 3 days</p> <p>≤ 50</p> <p>≤ 50</p> <p>≤ 50</p> <p>Formaldehyde after 28 days</p> <p>≤ 10</p> <p>≤ 10</p> <p>≤ 10</p> <p>Acetaldehyde after 3 days</p> <p>≤ 50</p> <p>≤ 50</p> <p>≤ 50</p> <p>≤ 0.05 ppm</p> <p>≤ 0.05 ppm</p> <p>≤ 0.05 ppm</p> <p>Sum of volatile C1A/C1B after 3 days</p> <p>< 10</p> <p>< 10</p> <p>< 10</p> <p>Any volatile C1A/C1B after 28 days</p> <p><1</p> <p><1</p> <p><1</p> <p>Sum TVOC + TSVOC after 28 days</p> <p>Sum of form- and acetaldehyde</p> <p>Edition: 07.11.2024</p>
