INDUFLEX-PU_206415_Englisch.pdf
4 页数
1.2 MB
Download
<h1>INDUFLEX-PU_206415_Englisch.pdf</h1> <p>Technical Datasheet <br />INDUFLEX-PU <br />Elastic 1 component-PU sealant</p> <p>Material number</p> <p>Contents</p> <p>Packaging</p> <p>Colour</p> <p>206415001</p> <p>600 ml</p> <p>Tubular bag</p> <p>Grey</p> <p>Product features <br />Good chemical and mechanical resistance <br />Frost-resistant and ageing-resistant <br />pigmented <br />temperature-resistant from - 40 °C to + 80 °C</p> <p>Advantages <br />Elastic and UV-resistant <br />Ready to use <br />total permissible deformation: 25%</p> <p>Areas of application / surface protection <br />for joint widths von 10 mm bis 30 mm <br />For interior and exterior use</p> <p>Existing test certificates <br />CE mark and declaration of performance in accordance with DIN EN 15651-4:2012</p> <p>SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com <br />1/4</p> <p>01/08/2023</p> <p>Technical Datasheet <br />INDUFLEX-PU <br />Technical Data <br />Material properties <br />Product components <br />Base material <br />Density, ready to use product (ISO 1183-1) <br />Recoverability (ISO 7389) <br />Shore-A hardness (ISO 868) <br />Temperature resistance <br />Deformation (DIN EN ISO 11600) <br />Viscosity, ready to use product <br />Water pollution class (WGK) <br />Total permissible deformation (DIN EN ISO 11600)</p> <p>Ready to use <br />Polyurethane (moisture curing) <br />approx. 1.3 g/cm³ <br />> 90 % <br />approx. 40 <br />- 40 + 80 °C <br />25 % <br />Filler consistency <br />1 (Selbsteinstufung) <br />max. 25 %</p> <p>Application <br />Substrate temperature <br />Max. relative humidity <br />Minimum reaction temperature <br />Consumption</p> <p>Skin formation time</p> <p>from 5 °C to 40 °C <br />80 % <br />min. 5 °C <br />Joint width (mm) × filling depth of jointing compound (mm) = <br />required quantity of jointing compound (ml) per linear metre of <br />joint. <br />min. 60 - 90 minutes</p> <p>Application technology <br />Aids/tools <br />Smooth wood <br />Cartridge gun <br />Brush <br />Industrial vacuum cleaner</p> <p>Manual processing <br />Can be smoothed with a smoothing tool</p> <p>Substrate preparation <br />Requirement for substrate <br />1. <br />2. <br />3. <br />4. <br />5.</p> <p>Dry <br />Load-bearing <br />Firm <br />Grippy <br />Protected from moisture penetration from the rear</p> <p>Measures for substrate preparation <br />Substrate preparations must be carried out in compliance with DIN EN 14879-1:2005, 4.2 et.seq.</p> <p>Substrate quality class</p> <p>Preparing the details</p> <p>SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com <br />2/4</p> <p>01/08/2023</p> <p>Technical Datasheet <br />INDUFLEX-PU <br />Usage <br />Application <br />1. <br />2. <br />3. <br />4. <br />5.</p> <p>Insert a closed-cell backfill cord into the prepared joint space without damaging it. <br />Before grouting, protect the joint edge areas with adhesive tape. <br />Cementitious, absorbent joint edges must be primed with INDU-Primer-S beforehand. <br />Non-absorbent joint edges must be primed with INDU-Primer-N. <br />INDUFLEX-PU is applied with a suitable cartridge gun. The joint sealant must be applied free of bubbles and voids and must have complete <br />contact with the joint edges. <br />6. If necessary, level the joint surface within the pot life by lightly brushing over with the smoothing wood or a soft brush using a smoothing agent. <br />7. Strike off the joint compound with a suitable smoothing tool, pressing on the joint edges and the backfill.</p> <p>Cleaning tools <br />Immediately after use, clean tools with ASO-R001.</p> <p>Storage conditions <br />Storage <br />Store in a frost-free, cool and dry place. At min. 5 - 25 °C for 15 months in the original canister. Promptly use opened canister.</p> <p>Disposal <br />Hardened product leftovers can be disposed of in household waste.</p> <p>Notes <br />The indicated consumption quantities are calculated values without additions for textured surface roughness and absorbency, level <br />compensation, and residual material in the canister. We always recommend a calculated safety addition of 10% on top of the calculated <br />consumption quantities. <br />Higher temperatures shorten the pot life. Lower temperatures increase the application and hardening times. <br />The bonding between the individual layers can be strongly disrupted between the individual application steps due to the effects of dampness <br />and contamination. Coating work requires a substrate temperature of at least 3 °C above the dew point temperature. <br />INDUFLEX-PU must not be used in swimming pool areas and for sealing glass. <br />INDUFLEX-PU must not be painted over. <br />Slight colour differences, caused by different production batches and raw material fluctuations, are unavoidable. Neighbouring surface <br />sections should be coated using the same production batch (same batch no. on the delivered packaging). <br />Protect from the effects of dirt and moisture during the curing phase. <br />Observe the technical data sheets of the products mentioned before starting work. <br />Applications that have not been clearly mentioned in this technical data sheet may only be carried out after the technical service department <br />of SCHOMBURG GmbH has been consulted, and after the said department has approved of such a course of action in writing.</p> <p>The recognised standards of construction engineering, the relevant guidelines and current regulations <br />must be observed. <br />Observe applicable safety data sheet!</p> <p>SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com <br />3/4</p> <p>01/08/2023</p> <p>Technical Datasheet <br />INDUFLEX-PU <br />Annotations <br />Conformity / Declaration / Verification</p> <p>Chemical durability</p> <p>The rights of the buyer with regard to the quality of our materials are based on our terms and conditions of sale and delivery. Our technical advice team will be happy to advise you <br />in the case of requirements that exceed the scope of the application described here. In order to be binding, a legally binding written confirmation is required. The product description <br />does not release the user from a duty of care. Lay a test area in the event of uncertainty. This version becomes invalid in the event of a new version being issued.</p> <p>SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com <br />4/4</p> <p>01/08/2023</p>
