INDUFLEX-PS, Leistungserklärung _28.10.2016_GB.pdf
2 页数
86.6 KB
Download
<h1>INDUFLEX-PS, Leistungserklärung _28.10.2016_GB.pdf</h1> <p>Declaration of Performance <br />according Annex III of the Regulation (EU) No 305/2011 <br />amended by Commissions delegated Regulation (EU) No 574/2014</p> <p>for the product</p> <p>INDUFLEX-PS <br />20 6414</p> <p>1. Unique identification code of the product type:</p> <p>EN 14188-2 sl M</p> <p>2. Intended use:</p> <p>Joint sealant for fuel-resistant joints in concrete <br />surfaces and other traffic areas</p> <p>3. Manufacturer:</p> <p>Schomburg GmbH & Co. KG <br />Aquafinstrasse 2-8 <br />32760 Detmold</p> <p>4. System or systems of assessment and <br />verification of constancy of performance <br />of the construction product as:</p> <p>System: 4</p> <p>5. Harmonised standard</p> <p>EN 14188-2:2004</p> <p>6. Notified test laboratory:</p> <p>not relevant</p> <p>7. Declared performance : <br />Essantial characteristic</p> <p>Fire reaction <br />Adhesion strength</p> <p>Adhesion and Tensile Strength <br />Recovering capability <br />Permanence of Water Impermeability <br />Adhesion and Tensile Strength after <br />storage in liquid chemicals of class B,C <br />and D <br />Resistance against hydrolysis <br />Artificial Weathering by UV exposure <br />Flame restistance</p> <p>Performance</p> <p>System of <br />assessment and <br />verification of <br />constancy of <br />performance</p> <p>Harmonised <br />technical <br />specification</p> <p>class E <br />No failure at <br />-20°C <br />< 0,6 MPa <br />Tensile Modulus at <br />100% Elongation at <br />23°C ≥ 0,15 MPa <br />at -20°C ≤ 0,6 MPa <br />≥ 70% <br />passed <br />No failure</p> <p>passed <br />passed <br />passed</p> <p>System 4</p> <p>EN 14188-2:2004</p> <p>The performance of the product identified above is in conformity with the set of declared performance/s. This <br />declaration of performance is issued, in accordance with Regulation (EU) No 305/2011, under the sole <br />responsibility of the manufacturer identified above. <br />Signed for and on behalf of the manufacturer by: <br />Michael Hölscher, technical service surface protection <br />(name and function)</p> <p>Detmold, 28.10.2016</p> <p>This declaration of performance was created electronically. <br />It is valid without manual signature. <br />The current material safety data sheet and technical data sheet is downloadable under <br />http://www.schomburg.com/de/en/downloads/datasheets/materials_safety_data_sheet/d <br />or <br />http://www.schomburg.com/de/en/downloads/datasheets/technical_data_sheet/d</p>
