Folder_ASO-PG_3025_EN.pdf
2 页数
1.0 MB
Download
<h1>Folder_ASO-PG_3025_EN.pdf</h1> <p>SCHOMBURG</p> <p>Easy and versatile <br />in use</p> <p>Problems Solved.</p> <p>DEPENDABLE <br />RENOVATION <br />INSTEAD OF REMOVAL</p> <p>As reinforcing fabric <br />Check and prepare substrate. <br />Cut ASO-PG to size and overlap joints by at least <br />10 cm. Apply SCHOMBURG tile adhesive or <br />SOLOCRET-60 to the substrate using an 8 mm notched <br />trowel. Place ASO-PG on the fresh mortar and smooth it <br />in with a flat trowel.</p> <p>Changes reserved. The valid issue of the corresponding technical bulletin legally applies.</p> <p>ASO®-PG</p> <p>SCHOMBURG GmbH <br />Aquafinstraße 2–8 <br />D-32760 Detmold (Germany) <br />Telephone +49-5231-953-00 <br />Fax <br />+49-5231-953-333 <br />www.schomburg.com</p> <p>stabilises substrates</p> <p>reinforces levelling compounds</p> <p>reduces crack formation <br />30/25 RAc/LSt</p> <p>As non-static reinforcement in <br />SOLOPLAN-30-PLUS <br />Check and prepare substrate. Install edging insulation <br />strips RD-SK 50 to all rising building components <br />(e.g. walls). Cut ASO-PG to size and lay loosely on the <br />substrate. Prods are to be overlapped by at least 10 cm. <br />Pour SOLOPLAN-30-PLUS onto the ASO-PG in the <br />required layer thickness.</p> <p>Armoured fabric for stabilising <br />substrates.</p> <p>schomburg.de <br />schomburg.com</p> <p>Armoured fabric for stabilising <br />substrates. <br />ASO®-PG <br />Dependable and versatile in restoration work. <br />ASO-PG offers a reliable solution for the restoration of <br />critical and damaged substrates. <br />In combination with a SCHOMBURG tile adhesive or the <br />non-slump levelling compound SOLOCRET-60, ASO-PG <br />serves as a reinforcing fabric and effectively reduces the <br />risk of cracking in the tile finish – especially on substrates <br />prone to cracking, such as floors with cut in underfloor <br />heating systems. <br />ASO-PG also performs well as non-static reinforcement in <br />the self-levelling compound SOLOPLAN-30-PLUS. It <br />enables the production of thin-layer floor constructions on <br />wooden substrates or pressure-stable, bound fills – ideal <br />for demanding renovation projects.</p> <p>Technical data <br />Product components</p> <p>Roll goods</p> <p>Package type</p> <p>1 m x 25 m</p> <p>Base material</p> <p>E-glass</p> <p>Finished weight</p> <p>approx. 540 g/m2</p> <p>Thickness</p> <p>approx. 1.0 mm</p> <p>Mesh width</p> <p>approx. 6.4 mm x 4.9 mm</p> <p>Tensile strength after <br />ISO 4606:1995:</p> <p>5300 N/5 cm (warp) <br />9000 N/5 cm (weft)</p> <p>Extension after <br />ISO 4606:1995:</p> <p><5%</p> <p>Consumption</p> <p>approx. 1.1 m2 per m2</p> <p>Real added-value for renovation work. ASO-PG minimises <br />risks, creates security and avoids the costly stripping out of <br />existing substrates. <br />Flexural strength with reference to <br />DIN EN 13813 <br />Flexural strengths of SOLOPLAN-30-PLUS in combination <br />with ASO-PG according to layer thickness. <br />20 mm layer thickness = ca. 5.0 N/mm2</p> <p>Areas of application <br />• as non-static reinforcement of levelling compounds <br />• as a reinforcing fabric in self-levelling or non-slump levelling <br />compounds and tile adhesives <br />• as reinforcement of substrates <br />• as crack reinforcement and reinforcing fabric over <br />embedded floor heating systems <br />• as non-static reinforcement in SOLOPLAN-30-PLUS on <br />pressure-stable bound fill <br />• to increase the flexural rigidity in combination with <br />SOLOPLAN-30-PLUS on wooden substrates <br />• in wall and floor areas <br />• for heated and unheated substrates <br />• for interior and exterior use <br />Properties <br />• stabilises substrates <br />• increases flexural strength of levelling layers <br />• reduces tension <br />• inhibits crack formation <br />Advantages <br />• strengthens existing substrates <br />• protects against crack formation in tiles and natural stone <br />coverings <br />• enables thin-layer floor constructions <br />• reduces crack propagation</p> <p>25 mm layer thickness = ca. 5.0 N/mm2 <br />30 mm layer thickness = ca. 7.0 N/mm2</p> <p>Requirements for the constructions and the necessary compressive and flexural strengths, <br />static properties and other requirements must be checked, planned and specified by a <br />planner before construction begins.</p> <p>More <br />about the <br />product</p>
