European_Model_EPD_Polymer_modified_bituminous_thick_coatings_for_waterproofing.pdf
11 页数
1.1 MB
Download
<h1>European_Model_EPD_Polymer_modified_bituminous_thick_coatings_for_waterproofing.pdf</h1> <p>ENVIRONMENTAL PRODUCT DECLARATION <br />as per ISO 14025 and EN 15804+A2 <br />Owner of the Declaration Deutsche Bauchemie e.V. <br />Publisher</p> <p>Institut Bauen und Umwelt e.V. (IBU)</p> <p>Programme holder</p> <p>Institut Bauen und Umwelt e.V. (IBU)</p> <p>Declaration number</p> <p>EPD-DBC-20250268-IBP1-EN</p> <p>Issue date</p> <p>03.09.2025</p> <p>Valid to</p> <p>02.09.2030</p> <p>Polymer modified bituminous thick coatings for waterproofing</p> <p>Deutsche Bauchemie e.V.</p> <p>www.ibu-epd.com | https://epd-online.com</p> <p>1. General Information <br />Deutsche Bauchemie e.V.</p> <p>Polymer modified bituminous thick coatings for <br />waterproofing</p> <p>Programme holder</p> <p>Owner of the declaration</p> <p>IBU – Institut Bauen und Umwelt e.V. <br />Hegelplatz 1 <br />10117 Berlin <br />Germany</p> <p>Deutsche Bauchemie e.V. <br />Mainzer Landstr. 55 <br />60329 Frankfurt <br />Germany</p> <p>Declaration number</p> <p>Declared product / declared unit</p> <p>EPD-DBC-20250268-IBP1-EN</p> <p>1 kg: 600-1400 kg/m³</p> <p>This declaration is based on the product category rules:</p> <p>Scope:</p> <p>Polymer-enhanced bituminous thick layer compounds for sealing <br />buildings, 01.08.2021 <br />(PCR checked and approved by the SVR) <br />Issue date <br />03.09.2025 <br />Valid to <br />02.09.2030</p> <p>This declaration is exclusively valid for the specified product groups <br />(polymer modified bituminous thick coatings) for works in Germany for five <br />years after the date of issue. This EPD is a Model EPD where the product <br />displaying the highest environmental impact in a group was selected for <br />calculating the EPD results. <br />This EPD may be used by members of DBC provided it has been proven <br />that the respective product can be represented by this EPD. For this <br />purpose, a guideline is available at the secretariat of DBC. The members <br />of the association are listed on the website. <br />The owner of the declaration shall be liable for the underlying information <br />and evidence; the IBU shall not be liable with respect to manufacturer <br />information, life cycle assessment data and evidences. <br />The EPD was created according to the specifications of EN 15804+A2. In <br />the following, the standard will be simplified as EN 15804. <br />Verification <br />The standard EN 15804 serves as the core PCR <br />Independent verification of the declaration and data according to ISO <br />14025:2011 <br />internally</p> <p>Dipl.-Ing. Hans Peters <br />(Chairman of Institut Bauen und Umwelt e.V.)</p> <p>Florian Pronold <br />(Managing Director Institut Bauen und Umwelt e.V.)</p> <p>1</p> <p>X</p> <p>externally</p> <p>Matthias Schulz, <br />(Independent verifier)</p> <p>Environmental Product Declaration - Deutsche Bauchemie e.V. - Polymer modified bituminous thick coatings for waterproofing</p> <p>2. Product <br />2.1 <br />Product description/Product definition <br />Polymer-modified bituminous thick coatings are paste-like <br />bitumen-based emulsion masses which are enhanced with <br />polymers and can be applied with a palette knife or sprayed on. <br />Polymer-modified bituminous thick coatings can be polystyrenefilled and/or fibre-reinforced, and both single-component and <br />twin-component. The second component can be powdery and <br />mineral-based or liquid/paste-like. <br />Due to the possibility of applying them in thick layers, polymermodified thick bituminous coatings represent a reliable and safe <br />type of waterproofing which features good crack bridging. <br />These are long-life waterproofing products which protect <br />construction components and contribute to their functionality <br />and value retention. The serviceability of buildings can be <br />significantly improved and their service life considerably <br />extended through their use. The product with the greatest <br />environmental impact was selected as a representative product <br />to calculate the LCA results. <br />For the placing on the market in the European Union/European <br />Free Trade Association (EU/EFTA) with the exception of <br />Switzerland, products falling under Regulation (EU) No <br />305/2011 (CPR) need a Declaration of Performance (DoP) <br />taking into consideration either the relevant harmonised <br />European standards (hEN) or the European Technical <br />Assessment (ETA) and the CE marking. The product requires a <br />declaration of performance in compliance with DIN EN <br />15814:2011+A2:2014, Polymer-modified bituminous thick <br />coatings for waterproofing and CE marking. The respective <br />national provisions apply to use. <br />2.2 Application <br />Polymer modified bituminous thick coatings are used to <br />waterproof construction components for the Polymer modified <br />bituminous thick coatings are used to waterproof construction <br />components for the following applications: <br />Module 1: Areas in contact with soil <br />- Against ground water and impact of pressuring water <br />- Polymer modified bituminous thick coatings protect the <br />construction components against aggressive substances which <br />occur naturally in the ground. <br />Module 2: On horizontal and sloping surfaces <br />- Outdoors: Balconies, loggias and pergolas. <br />- In areas in contact with soil: Earth-covered ceilings against <br />non-pressuring water. <br />Module 3: Joints <br />- Movement and butt joints between concrete building <br />components with high water penetration resistance. <br />- For intersections between building waterproofing on concrete <br />components with high water penetration resistance <br />2.3 <br />Technical Data <br />Information on the performance of the construction product in <br />relation to its essential characteristics are contained in the <br />declaration of performance in accordance with EU Regulation <br />No. 305/2011 (Construction Products Regulation). <br />Technical data in accordance with EN 15814, Polymer modified <br />bituminous thick coatings for waterproofing: <br />- Crack-bridging capabilities to EN 15812, method A ·</p> <p>2</p> <p>- Flexibility at low temperatures to EN 15813 <br />- Resistance to compression to EN 15815 <br />- Resistance to rain to EN 15816 <br />- Resistance to water to EN 15817 <br />- Dimensional stability at high temperatures to EN 15818 <br />- Reduction of layer thickness when fully dried to EN 15819 <br />- Watertightness to EN 15820 <br />- Water vapour diffusion resistance insofar as relevant for the <br />application <br />- Pressure water (up to 3 m water column) to PGFBB, Part 1 <br />Additionally required for Module 3 Joints/transitions to concrete <br />components with high water penetration resistance: <br />Technical data according to the 'Testing principles regarding the <br />issuing of general building supervisory inspection certificates for <br />joint sealants in construction components i. a. made from <br />concrete with high resistance to water penetration in contact <br />with soil, Part 1: Seals for construction joints, crack crosssections, transitions and connections (PG-FBB, Part 1)'. <br />The minimum requirements of the testing principles for the <br />application areas indicated in the general building supervisory <br />test certificate must be complied with. The characteristics for <br />the proof of usability are to be specified in accordance with the <br />testing principles. <br />Performance values for the product in accordance with <br />declaration of performance in relation to its essential <br />characteristics in accordance with DIN EN <br />15814:2011+A2:2014, Polymer modified bituminous thick <br />coatings for waterproofing. <br />Technical data in accordance with EN 15814 <br />Name <br />Value <br />Unit <br />Crack bridging features acc. to EN <br />Class CB2 <br />15812, method A <br />Resistance to rain acc. to EN 15816) At least Class R2 <br />Resistance to water acc. to EN <br />passed <br />15817 <br />Thickness depletion when dried out Declaration of value <br />% <br />acc. to EN 15819 <br />(≤ 50 %) <br />Waterproof acc. to EN 15820 <br />Class W2A <br />Flexibility at low temperatures acc. to <br />passed <br />EN 15813 <br />Dimensional stability at high <br />passed <br />temperature acc. to EN 15818 <br />Reaction to fire acc. to EN 13501-1 <br />Class E <br />Resistance to compression acc. to <br />Class C2A <br />EN 15815 <br />Additionally required for Module 3 Joints/transitions to concrete <br />components with high water penetration resistance: <br />Technical data according to the 'Testing principles regarding the <br />issuing of general building supervisory inspection certificates for <br />joint sealants in construction components i.a. made from <br />concrete with high resistance to water penetration in contact <br />with soil, Part 1: Seals for construction joints, crack crosssections, transitions and connections (PG-FBB, Part 1)'. <br />The minimum requirements of the testing principles for the <br />application areas indicated in the general building supervisory <br />test certificate must be complied with. The characteristics for <br />the proof of usability are to be specified in accordance with the <br />testing principles.</p> <p>Environmental Product Declaration - Deutsche Bauchemie e.V. - Polymer modified bituminous thick coatings for waterproofing</p> <p>Performance values for the product in accordance with <br />declaration of performance in relation to its essential <br />characteristics in accordance with DIN EN <br />15814:2011+A2:2014, Polymer modified bituminous thick <br />coatings for waterproofing. <br />2.4 <br />Delivery status <br />Liquid or paste-like in white tin or plastic containers, in separate <br />or combined containers suitably tailored to the correct mixing <br />ratio for the specific application. Single-component products in <br />individual white tin or plastic containers. A protective foil can be <br />placed over the product surface to optimise storage stability. <br />Typical containers contain 10 to 32 kg or litres of material. <br />Barrels with a capacity of approximately 200 kg or litres or IBCs <br />(Intermediate Bulk Containers) with more than 1 tonne or 1 m³ <br />of content are used for larger applications. <br />The second component is packaged in tubular bags, <br />polyethylene (PE) foil bags, compound bags and/or plastic <br />containers and can be packed separately in cartons if <br />necessary. <br />The containers are packed onto pallets and enclosed in plastic <br />foil to secure them for transport. <br />A steel container was modelled for the LCA. <br />2.5</p> <p>2) This product contains further Category 1A or 1B <br />carcinogenic, mutagenic andreprotoxic (CMR) materials which <br />are not on the candidate list at a mass concentration of above <br />0.1 percent of mass in at least one partial product: no. <br />None of the input substances were classified as category 1A or <br />1B CMR substances at the time this model EPD was issued. <br />Substances classified as Category 1A/1B CMR substances at a <br />concentration of 0.1 % or above may be listed along with other <br />ingredients to be declared in Section 3 of the safety data sheet <br />of the respective product. <br />3) Biocide products were added to this construction product or it <br />was treated with biocidal products (this then concerns a treated <br />product as defined by the EU Regulation on Biocidal Products <br />No. 528/2012): yes. <br />In-can preservatives based on one or a combination of several <br />active ingredients are approved for product type 6 (In-canpreservation) according to EU Biocide Product Regulation No. <br />528/2012.</p> <p>Base materials/Ancillary materials</p> <p>Polymer-modified bituminous thick coatings contain at least 35 <br />% binder (bitumen and polymers). They are classified under <br />GISBAU/-GISCODE BBP 10 Bitumen Emulsions due to their <br />composition. <br />On average, the products covered by this EPD contain the <br />following basic and auxiliary materials within the following <br />margins: <br />- Bitumen: ~ 20-60 % <br />- Water: ~ 0-40 % <br />- Polymers: ~ 0-25 % <br />- Inorganic & organic fillers: ~ 0-30 % <br />- Cement ~ 0-15 % <br />- Additives: ~ 2-10 % <br />The margins specified are average values and the composition <br />of products which comply with the EPD can deviate from the <br />specified concentration ranges in individual cases. More <br />detailed information is available in the respective <br />manufacturer's documentation (e.g. product data sheets). <br />No flame retardants are used in the polymer modified <br />bituminous thick coating (PMBC). Bitumen and polymer binding <br />agents are used as watery emulsions or dispersions and not <br />dissolved in organic solvents. <br />The auxiliary materials in the polymer-modified bituminous thick <br />coating (PMBC) can be mineral-based mixtures, expanded <br />polystyrene or inorganic and polymer fibers. <br />1) This product contains substances from the ECHA list of <br />materials which are especially problematic for approval: <br />substances of very high concern (SVHC) (Date 31/01/2025) <br />above a mass of 0.1 %: no. <br />At the time this model EDP was issued, none of the substances <br />used was included in the REACH candidate list (list in <br />accordance with Article 59, Paragraph 1 of the REACH <br />regulation). Substances from the candidate list which are</p> <p>3</p> <p>present at a concentration of 0.1 % or above may be listed next <br />to other ingredients to be declared in Section 3 of the safety <br />data sheet for the respective product.</p> <p>2.6 <br />Manufacture <br />The formulated product components are generally mixed <br />together from the ingredients in a batch process and packed <br />into the supply container. Quality standards in accordance with <br />ISO 9001 and the provisions of relevant regulations such as the <br />Industrial Safety Directive and the Federal Emissions Control <br />Act are complied with. <br />2.7 Environment and health during manufacturing <br />Generally, no further environmental protection measures <br />beyond those which are legally prescribed are necessary. <br />2.8 <br />Product processing/Installation <br />Polymer-modified bituminous thick coatings are processed <br />using palette knives, brushes, rollers or sprays. Work safety <br />measures are to be taken in accordance with the specifications <br />in the safety data sheet and the conditions on-site and <br />consistently complied with. Polymer-modified bituminous thick <br />coatings are marked with the GISBAU-GISCODE BPP 10 code <br />due to their composition. <br />Polymer-modified bituminous thick coatings are worked at the <br />ambient temperature and not under heat. No bitumen or solvent <br />vapours occur as a result. No health-relevant inhalation <br />exposure is therefore to be expected during the manufacture, <br />processing and use of polymer-modified bituminous thick <br />coatings. <br />2.9 Packaging <br />Completely empty containers and slightly product-contaminated <br />foils can be recycled. Reusable wooden pallets are taken back <br />by the building materials trade (reusable pallets against <br />reimbursement within the deposit system), returned by them to <br />building product manufacturers and returned to the production <br />process. <br />2.10 Condition of use <br />In the use phase, polymer-modified bituminous thick coatings <br />form a homogeneous sealing film which consists of bitumen <br />and auxiliary materials. <br />2.11</p> <p>Environment and health during use</p> <p>Environmental Product Declaration - Deutsche Bauchemie e.V. - Polymer modified bituminous thick coatings for waterproofing</p> <p>During the use phase, polymer modified bituminous thick <br />coatings behave inertly. No hazards are known for water, air <br />and soil if the products are used as designated. <br />2.12</p> <p>Reference service life</p> <p>Polymer-modified bituminous thick coatings fulfil specialised <br />tasks in the construction or renovation of buildings. The <br />usability of buildings can be improved accordingly and their <br />original service life significantly extended by their use. The <br />anticipated reference service life depends on the specific <br />installation situation and the associated exposure of the <br />product. It can be influenced by the weather and also by <br />mechanical or chemical loads. - 2.13 <br />Extraordinary effects <br />Fire <br />Even without special fire protection equipment, polymer <br />modified bituminous thick coatings fulfil the requirements of <br />EN13501-1 for fire class E as a minimum. Due to their <br />installation as building waterproofing with soil contact in <br />mineral-based substrates such as masonry or concrete, and <br />due to the quantity used (thin-coated max. 4 mm), they also <br />have only a minor influence on the fire properties of the building <br />in which they are installed. <br />Water <br />Polymer-modified bituminous thick coatings are waterproof. <br />They are used to waterproof buildings against damaging water <br />ingress and flood impacts. <br />Mechanical destruction <br />The mechanical destruction of polymer modified bituminous <br />thick coatings does not lead to decomposition products which <br />are hazardous to the environment or to health. <br />2.14 Re-use phase <br />According to the current state of knowledge, no environmentally <br />harmful effects are to be expected from dismantling and <br />recycling components to which polymer modified bituminous</p> <p>thick coatings still adhere. If polymer modified bituminous thick <br />coatings can be removed from building components without too <br />much effort, then thermal recycling is a worthwhile recycling <br />variant due to their energy content. <br />2.15 Disposal <br />Individual components which can no longer be recycled must <br />be mixed together at the prescribed ratio and hardened. <br />Polymer-modified bituminous thick coatings are disposed of as <br />follows: <br />- Hardened product residues are not hazardous waste. <br />- Non-hardened product residues are hazardous waste. <br />- Completely empty, dried containers (free of drops and <br />scraped-clean) can be recycled. <br />- Residual quantities are to be disposed of in accordance with <br />the local regulations. <br />The following EWC waste codes may be appropriate: if the <br />bitumen products have not been contaminated with other <br />products. <br />2-Component bitumen emulsion: <br />- Component A (bitumen component): 170302 or 161001 <br />- Component B (powder component) 101311, 101314, 160303 <br />or 160304 <br />Hardened product remains: <br />- Components A & B mixed and hardened: 050117 or 050199 <br />2.16 <br />Further information <br />Further information can be found in the manufacturer's product <br />or safety data sheets and is also available from the <br />manufacturer's website or on enquiry. Valuable technical <br />information is also available from the association's website <br />(https://deutsche-bauchemie.de/)</p> <p>3. LCA: Calculation rules <br />3.1 Declared Unit <br />This model EPD is based on the declared unit of 1 kg of <br />polymer-modified bituminous thick coating at the mixing ratio of <br />both components required for processing. <br />The assessments relate to the representative worst-case <br />product; the data for the production process consists of <br />average values from various manufacturers and production <br />plants. <br />A consumption value per surface area unit and formulations are <br />not specified in this EPD due to the different areas of <br />application (depending on whether it is applied to a flat surface <br />or in joints). Precise information is available in the <br />manufacturer's data sheets. <br />The density of the products is within a range of approximately <br />600-1400 kg/m³. <br />Declared unit and mass reference <br />Name <br />Declared unit <br />conversion factor <br />Gross density min value</p> <p>Value <br />1 <br />1 <br />600</p> <p>kg/m3</p> <p>Goss density max value</p> <p>1400</p> <p>kg/m3</p> <p>4</p> <p>Unit <br />kg <br />-</p> <p>3.2 System boundary <br />The Declaration type is according to EN 15804: Cradle to gate <br />with options, modules C1–C4, and module D (A1–A3, C, D) and <br />additional modules (A4-A5). <br />Modules A1-A3, A4, A5, C1, C2, C3, C4 and D are included in <br />the LCA: <br />· A1: Raw materials supply; <br />· A2: Transport to works; <br />· A3: Production including energy provision, manufacture of <br />packaging and also auxiliary and operating materials and waste <br />treatment; <br />· A4: Transport to the building site; <br />· A5: Installation (incineration of packaging materials as <br />wooden pallets, plastic and paper and product residues, <br />emissions during installation and disposal of steel tin plate); <br />C1: Deconstruction and demolition of the entire product. It <br />considers energy generation and consumption of diesel and all <br />the emissions connected with the fuel-burning process to <br />run the machines; <br />C2: Transport to EoL <br />C3: Waste processing for reuse, recovery and/or recycling. C3 <br />is not relevant for the product declared in the EPD; <br />C4: Disposal;</p> <p>Environmental Product Declaration - Deutsche Bauchemie e.V. - Polymer modified bituminous thick coatings for waterproofing</p> <p>D: Module D accounts for potential benefits that are beyond the <br />defined system boundaries. Credits from the burning of the <br />packaging materials and product residue were estimated.</p> <p>3.3 Estimates and assumptions <br />If no specific Managed LCA Content 2024 processes were <br />available, the individual component ingredients of the <br />formulations were estimated based on manufacturer <br />specifications or literature. <br />3.4 <br />Cut-off criteria <br />No cut-off rules were applied in calculating the LCA. All raw <br />materials submitted by the association for the formulations were <br />included. The manufacture of machines, systems and other <br />infrastructure required to produce the products under <br />consideration was not included in the LCA. <br />3.5 Background data <br />Data from the Managed LCA Content 2024 database was used <br />as background data. This was supplemented by information <br />from the manufacturer and research in the relevant literature if <br />background data was not available. <br />3.6 Data quality <br />Representative products have been used, and the product from <br />the group with the greatest environmental impact has been <br />used to calculate the LCA results for this model EPD. The <br />primary data is not more than 5 years old, and the production <br />data represent an average of the year 2023. <br />3.7</p> <p>Representative formulations from Deutsche Bauchemie e.V. <br />from 2024 were compiled for the formulations. The production <br />data relates to a primary data collection from 2023. <br />3.8 Geographic Representativeness <br />Land or region, in which the declared product system is <br />manufactured, used or handled at the end of the product´s <br />lifespan: Germany <br />3.9 Allocation <br />No allocations were applied for production. A multi-input <br />allocation with a potential credit for electricity and thermal <br />energy is deployed in accordance with the simple credit method <br />for the burning of the packaging as well as the product residue <br />after installation. The potential credits from the incineration of <br />the packaging are credited in Module D. <br />3.10 Comparability <br />Basically, a comparison or an evaluation of EPD data is only <br />possible if all the data sets to be compared were created <br />according to EN 15804 and the building context, respectively <br />the product-specific characteristics of performance, are taken <br />into account. EPDs for building products may not be comparable if they are <br />not based on EN 15804. In this case, 1 kg of polymer-modified <br />bituminous thick coating was selected as the declared unit. An <br />appropriate conversion factor, such as the specific surface <br />weight may need to be included depending on the application. <br />The Managed LCA Content 2024 background database was <br />used for modelling.</p> <p>Period under review</p> <p>4. LCA: Scenarios and additional technical information <br />Characteristic product properties of biogenic carbon <br />Information on describing the biogenic carbon content at <br />factory gate <br />Name <br />Value Unit <br />kg <br />Biogenic carbon content in product <br />C <br />Biogenic carbon content in accompanying <br />kg <br />0.0157 <br />packaging <br />C <br />Note: 1 kg of biogenic carbon is equivalent to 44/12 kg of CO2. <br />The following technical information is the basis for the declared <br />modules or can be used for the development of specific <br />scenarios in the context of a building assessment if modules <br />are not declared (MND). <br />The emission factor used for the electricity grid mix used in A3 <br />is equal to 0.847 EN15804+A2 (EF 3.1) Climate Change - total <br />kg CO2 eq./kWh. <br />After the installation, the PMBC product installed is 0.79 kg. <br />The loss is due to the installation waste and water evaporation <br />(water contained as raw material in the PMBC and water <br />contained in the Polychloroprene dispersion 57 % solids). <br />Transport to the building site (A4)</p> <p>5</p> <p>Name <br />Value <br />Unit <br />Litres of fuel <br />0.0016 l/100km <br />Transport distance <br />500 <br />km <br />Capacity utilisation (including empty runs) <br />85 <br />% <br />Gross density of products transported <br />600 - 1400 kg/m3 <br />Capacity utilisation volume factor <br />100 <br />Installation into the building (A5) <br />Name <br />Auxiliary <br />Water consumption <br />Other resources <br />Electricity consumption <br />Other energy carriers <br />Material loss <br />Output substances following waste treatment on <br />site <br />Dust in the air <br />VOC in the air</p> <p>Value Unit <br />kg <br />m3 <br />kg <br />0.025 kWh <br />MJ <br />0.21 kg <br />-</p> <p>kg</p> <p>-</p> <p>kg <br />kg</p> <p>End of life (C1-C4) <br />Name <br />Collected separately waste type waste type <br />Collected as mixed construction waste <br />Reuse <br />Recycling <br />Energy recovery <br />Landfilling</p> <p>Value Unit <br />kg <br />0.79 kg <br />kg <br />kg <br />kg <br />0.79 kg</p> <p>Environmental Product Declaration - Deutsche Bauchemie e.V. - Polymer modified bituminous thick coatings for waterproofing</p> <p>5. LCA: Results</p> <p>Raw material <br />supply</p> <p>Transport</p> <p>Manufacturing</p> <p>Transport from the <br />gate to the site</p> <p>Assembly</p> <p>Use</p> <p>Maintenance</p> <p>Repair</p> <p>Replacement</p> <p>Refurbishment</p> <p>Operational energy <br />use</p> <p>Operational water <br />use</p> <p>De-construction <br />demolition</p> <p>Transport</p> <p>Waste processing</p> <p>Disposal</p> <p>ReuseRecoveryRecyclingpotential</p> <p>DESCRIPTION OF THE SYSTEM BOUNDARY (X = INCLUDED IN LCA; MND = MODULE OR INDICATOR NOT DECLARED; MNR <br />= MODULE NOT RELEVANT) <br />Benefits and <br />Construction <br />loads beyond <br />Product stage <br />Use stage <br />End of life stage <br />process stage <br />the system <br />boundaries</p> <p>A1 <br />X</p> <p>A2 <br />X</p> <p>A3 <br />X</p> <p>A4 <br />X</p> <p>A5 <br />X</p> <p>B1 <br />MND</p> <p>B2 <br />MND</p> <p>B3 <br />MNR</p> <p>B4 <br />MNR</p> <p>B5 <br />MNR</p> <p>B6 <br />MND</p> <p>B7 <br />MND</p> <p>C1 <br />X</p> <p>C2 <br />X</p> <p>C3 <br />X</p> <p>C4 <br />X</p> <p>D <br />X</p> <p>RESULTS OF THE LCA - ENVIRONMENTAL IMPACT according to EN 15804+A2: 1 kg polymer-modified bituminous thick <br />coating <br />Parameter <br />Unit <br />A1-A3 <br />A4 <br />A5 <br />C1 <br />C2 <br />C3 <br />C4 <br />D <br />GWP-total</p> <p>kg CO2 eq</p> <p>1.21E+00</p> <p>4.42E-02</p> <p>2.72E-01</p> <p>3.77E-04</p> <p>1.15E-02</p> <p>0</p> <p>1.19E-02</p> <p>-1.15E-01</p> <p>GWP-fossil</p> <p>kg CO2 eq</p> <p>1.26E+00</p> <p>4.31E-02</p> <p>2.06E-01</p> <p>3.68E-04</p> <p>1.12E-02</p> <p>0</p> <p>1.18E-02</p> <p>-1.14E-01</p> <p>GWP-biogenic</p> <p>kg CO2 eq</p> <p>-4.76E-02</p> <p>2.46E-04</p> <p>6.57E-02</p> <p>2.51E-06</p> <p>6.39E-05</p> <p>0</p> <p>3.41E-05</p> <p>-8.03E-04</p> <p>GWP-luluc</p> <p>kg CO2 eq</p> <p>2.04E-03</p> <p>8.28E-04</p> <p>9.33E-06</p> <p>7.02E-06</p> <p>2.15E-04</p> <p>0</p> <p>7.1E-05</p> <p>-1.38E-05</p> <p>ODP</p> <p>kg CFC11 eq</p> <p>9.08E-12</p> <p>1.36E-14</p> <p>3.43E-14</p> <p>1.15E-16</p> <p>3.53E-15</p> <p>0</p> <p>3.19E-14</p> <p>-1.48E-12</p> <p>AP</p> <p>mol H+ eq <br />kg P eq <br />kg N eq <br />mol N eq <br />kg NMVOC <br />eq <br />kg Sb eq <br />MJ</p> <p>2.27E-03</p> <p>1.6E-04</p> <p>7.44E-05</p> <p>1.82E-06</p> <p>6.66E-05</p> <p>0</p> <p>8.4E-05</p> <p>-1.11E-04</p> <p>4.99E-06 <br />7.23E-04 <br />7.98E-03</p> <p>1.17E-07 <br />7.43E-05 <br />8.37E-04</p> <p>1.09E-08 <br />1.92E-05 <br />3.13E-04</p> <p>9.94E-10 <br />8.79E-07 <br />9.78E-06</p> <p>3.04E-08 <br />3.24E-05 <br />3.62E-04</p> <p>0 <br />0 <br />0</p> <p>2.69E-08 <br />2.16E-05 <br />2.38E-04</p> <p>-3.01E-07 <br />-3.99E-05 <br />-4.24E-04</p> <p>2.13E-03</p> <p>1.51E-04</p> <p>5.24E-05</p> <p>2.49E-06</p> <p>6.44E-05</p> <p>0</p> <p>6.61E-05</p> <p>-1.05E-04</p> <p>1.03E-06 <br />3.4E+01</p> <p>7.33E-09 <br />5.65E-01</p> <p>4.3E-10 <br />3E-01</p> <p>6.21E-11 <br />4.79E-03</p> <p>1.9E-09 <br />1.47E-01</p> <p>0 <br />0</p> <p>7.66E-10 <br />1.56E-01</p> <p>-1.15E-08 <br />-1.73E+00</p> <p>6.98E-02</p> <p>3.09E-04</p> <p>2.51E-02</p> <p>2.62E-06</p> <p>8.01E-05</p> <p>0</p> <p>1.35E-03</p> <p>-1.58E-03</p> <p>EP-freshwater <br />EP-marine <br />EP-terrestrial <br />POCP <br />ADPE <br />ADPF <br />WDP</p> <p>m3 world eq <br />deprived</p> <p>GWP = Global warming potential; ODP = Depletion potential of the stratospheric ozone layer; AP = Acidification potential of land and water; EP = <br />Eutrophication potential; POCP = Formation potential of tropospheric ozone photochemical oxidants; ADPE = Abiotic depletion potential for non-fossil <br />resources; ADPF = Abiotic depletion potential for fossil resources; WDP = Water (user) deprivation potential)</p> <p>RESULTS OF THE LCA - INDICATORS TO DESCRIBE RESOURCE USE according to EN 15804+A2: 1 kg polymer-modified <br />bituminous thick coating <br />Parameter <br />Unit <br />A1-A3 <br />A4 <br />A5 <br />C1 <br />C2 <br />C3 <br />C4 <br />D <br />PERE <br />PERM <br />PERT <br />PENRE <br />PENRM <br />PENRT <br />SM <br />RSF <br />NRSF</p> <p>MJ <br />MJ <br />MJ <br />MJ <br />MJ <br />MJ <br />kg <br />MJ <br />MJ</p> <p>4.84E+00 <br />5.95E-01 <br />5.43E+00 <br />1.82E+01 <br />1.58E+01 <br />3.4E+01 <br />0 <br />0 <br />0</p> <p>6.26E-02 <br />0 <br />6.26E-02 <br />5.65E-01 <br />0 <br />5.65E-01 <br />0 <br />0 <br />0</p> <p>6.13E-01 <br />-5.95E-01 <br />1.75E-02 <br />2.81E+00 <br />-2.51E+00 <br />3E-01 <br />0 <br />0 <br />0</p> <p>5.3E-04 <br />0 <br />5.3E-04 <br />4.79E-03 <br />0 <br />4.79E-03 <br />0 <br />0 <br />0</p> <p>1.62E-02 <br />0 <br />1.62E-02 <br />1.47E-01 <br />0 <br />1.47E-01 <br />0 <br />0 <br />0</p> <p>0 <br />0 <br />0 <br />0 <br />0 <br />0 <br />0 <br />0 <br />0</p> <p>2.72E-02 <br />0 <br />2.72E-02 <br />1.56E-01 <br />0 <br />1.56E-01 <br />0 <br />0 <br />0</p> <p>-7.13E-01 <br />0 <br />-7.13E-01 <br />-1.73E+00 <br />0 <br />-1.73E+00 <br />0 <br />0 <br />0</p> <p>FW</p> <p>m3</p> <p>6.61E-03</p> <p>5.85E-05</p> <p>6.23E-04</p> <p>4.95E-07</p> <p>1.52E-05</p> <p>0</p> <p>4.13E-05</p> <p>-2.27E-04</p> <p>PERE = Use of renewable primary energy excluding renewable primary energy resources used as raw materials; PERM = Use of renewable primary <br />energy resources used as raw materials; PERT = Total use of renewable primary energy resources; PENRE = Use of non-renewable primary energy <br />excluding non-renewable primary energy resources used as raw materials; PENRM = Use of non-renewable primary energy resources used as raw <br />materials; PENRT = Total use of non-renewable primary energy resources; SM = Use of secondary material; RSF = Use of renewable secondary fuels; <br />NRSF = Use of non-renewable secondary fuels; FW = Use of net fresh water</p> <p>RESULTS OF THE LCA – WASTE CATEGORIES AND OUTPUT FLOWS according to EN 15804+A2: <br />1 kg polymer-modified bituminous thick coating <br />Parameter <br />Unit <br />A1-A3 <br />A4 <br />A5 <br />C1 <br />C2 <br />C3 <br />HWD <br />NHWD <br />RWD <br />CRU <br />MFR <br />MER <br />EEE</p> <p>6</p> <p>kg <br />kg <br />kg <br />kg <br />kg <br />kg <br />MJ</p> <p>2.35E-06 <br />2.16E-02 <br />4.87E-04 <br />0 <br />0 <br />0 <br />0</p> <p>2.75E-11 <br />9.56E-05 <br />9E-07 <br />0 <br />0 <br />0 <br />0</p> <p>3.95E-11 <br />2.72E-02 <br />1.33E-05 <br />0 <br />0 <br />0 <br />4.18E-01</p> <p>2.33E-13 <br />8.1E-07 <br />7.63E-09 <br />0 <br />0 <br />0 <br />0</p> <p>7.14E-12 <br />2.48E-05 <br />2.34E-07 <br />0 <br />0 <br />0 <br />0</p> <p>0 <br />0 <br />0 <br />0 <br />0 <br />0 <br />0</p> <p>C4</p> <p>D</p> <p>3.89E-11 <br />7.91E-01 <br />1.64E-06 <br />0 <br />0 <br />0 <br />0</p> <p>-1.65E-09 <br />-9.92E-04 <br />-6.36E-05 <br />0 <br />0 <br />0 <br />0</p> <p>Environmental Product Declaration - Deutsche Bauchemie e.V. - Polymer modified bituminous thick coatings for waterproofing</p> <p>EET</p> <p>MJ</p> <p>0</p> <p>0</p> <p>9.65E-01</p> <p>0</p> <p>0</p> <p>0</p> <p>0</p> <p>0</p> <p>HWD = Hazardous waste disposed; NHWD = Non-hazardous waste disposed; RWD = Radioactive waste disposed; CRU = Components for re-use; <br />MFR = Materials for recycling; MER = Materials for energy recovery; EEE = Exported electrical energy; EET = Exported thermal energy</p> <p>RESULTS OF THE LCA – additional impact categories according to EN 15804+A2-optional: <br />1 kg polymer-modified bituminous thick coating <br />Parameter <br />Unit <br />A1-A3 <br />A4 <br />A5 <br />C1 <br />C2 <br />PM <br />IR <br />ETP-fw <br />HTP-c <br />HTP-nc <br />SQP</p> <p>Disease <br />incidence <br />kBq U235 eq <br />CTUe <br />CTUh <br />CTUh <br />SQP</p> <p>C3</p> <p>C4</p> <p>D</p> <p>ND</p> <p>ND</p> <p>ND</p> <p>ND</p> <p>ND</p> <p>ND</p> <p>ND</p> <p>ND</p> <p>ND <br />ND <br />ND <br />ND <br />ND</p> <p>ND <br />ND <br />ND <br />ND <br />ND</p> <p>ND <br />ND <br />ND <br />ND <br />ND</p> <p>ND <br />ND <br />ND <br />ND <br />ND</p> <p>ND <br />ND <br />ND <br />ND <br />ND</p> <p>ND <br />ND <br />ND <br />ND <br />ND</p> <p>ND <br />ND <br />ND <br />ND <br />ND</p> <p>ND <br />ND <br />ND <br />ND <br />ND</p> <p>PM = Potential incidence of disease due to PM emissions; IR = Potential Human exposure efficiency relative to U235; ETP-fw = Potential comparative <br />Toxic Unit for ecosystems; HTP-c = Potential comparative Toxic Unit for humans (cancerogenic); HTP-nc = Potential comparative Toxic Unit for humans <br />(not cancerogenic); SQP = Potential soil quality index</p> <p>Disclaimer for EN 15804:2012+A2:2019: additional indicators <br />1) Potential Human exposure efficiency relative to U235 (IRP). This impact category deals mainly with the eventual impact of low dose <br />ionizing radiation on human health of the nuclear fuel cycle. It does not consider effects due to possible nuclear accidents, occupational <br />exposure nor due to radioactive waste disposal in underground facilities. Potential ionizing radiation from the soil, from radon and from <br />some construction materials is also not measured by this indicator. <br />2) The results of the environmental impact indicator. ADP, WDP, ETP-fw, HTP-c, HTP-nc, SQP shall be used with care as the <br />uncertainties on these results are high or as there is limited experience with the indicator. <br />3) Additional environmental impact indicators (suggested by (DIN EN 15804:2012+A2:2019)) are not declared in the EPD. The results <br />of this environmental impact indicator shall be used with care as the uncertainties on these results are high and as there is limited <br />experience with the indicator (see ILCD classification in EN 15804, table 5). For this reason, results based on these indicators are not <br />considered suitable for decision making process and are thus not declared in the EPD.</p> <p>6. LCA: Interpretation <br />All the other processes have a much lower impact. <br />The majority of impacts are associated with the production <br />phase modules (A1-A3). The most significant contribution to the <br />production phase impacts is the upstream production of raw <br />materials as the main driver. The transportation to the <br />construction site (A4) generates the second largest impacts in <br />the values of Eutrophication (marine and terrestrial) in the AP <br />and POCP due to the ammonia and nitrate. Emissions <br />associated with the manufacturing of raw materials also have <br />some influence on the formation potential of tropospheric ozone <br />(POCP) in the production phase. The installation process (A5) <br />generates a minor contribution to almost all impacts except for <br />Global Warming Potential (GWP), due to the incineration of the <br />packaging materials paper, plastic and pallets and Water <br />depletion due to the type of industrial process. <br />Overall, the impact categories and LCI parameters are <br />dominated by the production process A1-A3: <br />GWP: for global warming potential (100y) more than 70 % of <br />the impact is dominated by the production and installation, <br />followed by the installation of the material A5. The raw materials <br />production and acquisition are primarily responsible for the high <br />impact in A1-A3. <br />ODP: This impact is driven by the raw materials production and <br />acquisition in A1, leading the A1-A3 modules to achieve more <br />than 80 % of the impacts. All other processes have a very low <br />impact, except for module D that achieves a considerable <br />benefit. <br />AP: for this environmental impact indicator, the main <br />contribution is given by A1-A3 and in particular, the raw <br />materials production and acquisition result the most significant.</p> <p>7</p> <p>EP – freshwater- marine- terrestrial: these indicators behave <br />in a similar way. The production of raw materials and their <br />acquisition is again dominant compared to the other phases. <br />However, in this case the module A4 results to have a slightly <br />higher impact compared to the other categories in particular for <br />marine and terrestrial eutrophication. <br />POCP: as for the previous indicators, this impact category is <br />mainly influenced by A1-A3 emission. <br />ADPe: This category has a predominant process that has the <br />almost unique contribution given by A1-A3 modules (almost <br />100 %) and specifically raw materials and acquisition. All the <br />other processes do not contribute significantly to the impact. <br />ADPf: Also, for this category, the main contribution is given by <br />the modules A1-A3. <br />WU: The main contribution to the water depletion is given by <br />A1-A3, followed by A5. <br />Focusing on the contribution of the raw materials, it emerges <br />that the main responsible for the majority of the environmental <br />impact categories is polychloroprene dispersion 57 % solids, <br />followed by the straight run bitumen. The contribution of the <br />polychloroprene dispersion 57 % solids ranges between 63 % <br />approximately for ADPF and 95 % approximately for ODP. The <br />highest contribution of the straight-run bitumen appears in <br />ADPF. Considerable impacts are also given by fatty acids and <br />condensate that count for EP freshwater, marine and terrestrial <br />for approximately 7-8 %.</p> <p>Environmental Product Declaration - Deutsche Bauchemie e.V. - Polymer modified bituminous thick coatings for waterproofing</p> <p>7. Requisite evidence <br />- 7.1 Leaching <br />Tests carried out so far to determine leaching behaviour (eluate <br />analysis) give no clear indication that any negative effects on <br />soil and ground water are to be expected. Tests based on the</p> <p>Requirements of Buildings with regard to their effect on Soil and <br />Ground Water (ABuG), July 2017 edition, can be performed on <br />a voluntary basis in accordance with Appendix 10 of the Model <br />Administrative Provisions of the Technical Building Regulations <br />(MVV TB)</p> <p>8. References <br />Standards <br />DIN 18195 <br />DIN 18195:2017-07, Waterproofing of buildings - Vocabulary <br />EN 13501-1 <br />DIN EN 13501-1:2019-05, Fire classification of building <br />products and building elements – Part 1: Classification using <br />data from reaction to fire tests. <br />EN 15804 <br />EN 15804:2012+A2:2019+AC:2021, Sustainability of <br />construction works — Environmental Product Declarations — <br />Core rules for the product category of construction products. <br />ISO 14025 <br />EN ISO 14025:2011, Environmental labels and declarations — <br />Type III environmental declarations — Principles and <br />procedures.</p> <p>coatings for waterproofing - Determination of watertightness. <br />ISO 9001 <br />DIN EN ISO 9001:2015-11, Quality management systems Requirements. <br />CPR <br />CPR Regulation <br />(EU) No 305/2011 of the European Parliament and of the <br />Council of 9 March 2011 laying down harmonised conditions for <br />the marketing of construction products and repealing Council <br />Directive 89/106/EEC <br />Managed LCA Content. (2024) <br />Dataset documentation for the software-system and databases <br />(version 2024.2), LBP, University of Stuttgart and Sphera, <br />Leinfelden-Echterdingen. Retrieved from <br />(https://sphera.com/product-sustainability-software/)</p> <p>Further references <br />EN 15812 <br />DIN EN 15812:2011-06, Polymer modified bituminous thick <br />coatings for waterproofing - Determination of crack bridging <br />ability <br />EN 15813 <br />DIN EN 15813:2011-06, Polymer modified bituminous thick <br />coatings for waterproofing - Determination of flexibility at low <br />temperatures. <br />EN 15814 <br />DIN EN 15814:2015-03, Polymer modified bituminous thick <br />coatings for waterproofing - Definitions and requirements <br />EN 15815 <br />DIN EN 15815:2011-06, Polymer modified bituminous thick <br />coatings for waterproofing - Resistance to compression. <br />EN 15816 <br />DIN EN 15816:2011-06, Polymer-modified bituminous thick <br />coatings for waterproofing - Resistance to rain. <br />EN 15817 <br />DIN EN 15817:2011-06, Polymer modified bituminous thick <br />coatings for waterproofing - Water resistance. <br />EN 15818 <br />DIN EN 15818:2011-06, Polymer modified bituminous thick <br />coatings for waterproofing - Determination of dimensional <br />stability at high temperature. <br />EN 15819 <br />DIN EN 15819:2011-06, Polymer modified bituminous thick <br />coatings for waterproofing - Reduction of the thickness of the <br />layer when fully dried. <br />EN 15820 <br />DIN EN 15820:2011-06, Polymer modified bituminous thick</p> <p>8</p> <p>IBU 2022 <br />Institut Bauen und Umwelt e.V.: General Instructions for the <br />EPD programme of Institut Bauen und Umwelt e.V., Version <br />2.0, Berlin: Institut Bauen und Umwelt e.V., 2022 <br />www.ibu-epd.com <br />EU Ordinance on Biocide Products (EU) No 528/2012): <br />Regulation (EU) No 528/2012 of the European Parliament and <br />of the Council of 22 May 2012 concerning the making available <br />on the market and use of biocidal products* which harmonises <br />the rules in the European Union (EU) concerning the sale and <br />use of biocidal products, while ensuring high levels of <br />protection of human and animal health, and of the environment. <br />* products such as household disinfectants, insecticides and <br />other chemicals used to suppress pests - parasites, fungi, <br />bacteria, etc. - or to protect materials. As their properties can <br />pose risks to humans, animals and the environment, they are <br />regulated at the EU level. <br />EWC waste code <br />European Waste Catalogue regulation (EWC). <br />GISBAU <br />GISBAU: Construction industry trade association hazardous <br />substance information system https://www.bgbau.de/. <br />MVV TB <br />Model Administrative Provisions of the Technical Building <br />Regulations, 2024/1 edition. <br />PCR Part A <br />Calculation rules for the LCA and requirements of the project <br />report , Version 1.4, Institut Bauen und Umwelt e.V., www.bauumwelt.com, 04-2024 <br />PCR Part B <br />Product category rules for building products Part B: <br />Requirements of the EPD for Polymer-enhanced bituminous <br />thick layer compounds for sealing buildings, Version 11, Institut</p> <p>Environmental Product Declaration - Deutsche Bauchemie e.V. - Polymer modified bituminous thick coatings for waterproofing</p> <p>Bauen und Umwelt e.V. (IBU), 2024. <br />PG-FBB, Part 1 <br />Testing principles regarding the issuing of general building <br />supervisory inspection certificates for joint sealants in <br />construction components i. a. made from concrete with high <br />resistance to water penetration in contact with soil, Part 1: <br />Seals for construction joints, crack cross-sections, transitions <br />and connections; May 2020</p> <p>Regulation (EC) No. 1907/2006 of the European Parliament <br />and of the Council of 18th December 2006 concerning the <br />Registration, Evaluation, Authorisation and Restriction of <br />Chemicals (REACH), establishing a European Chemicals <br />Agency, amending Directive 1999/45/EC and repealing Council <br />Regulation (EEC) No. 793/93 and Commission Regulation (EC) <br />No. 1488/94 as well as Council Directive 76/769/EEC and <br />Commission Directives 91/155/EEC, 93/67/EEC, 93/105/EC <br />and 2000/21/EC.</p> <p>REACH regulations</p> <p>-</p> <p>9</p> <p>Environmental Product Declaration - Deutsche Bauchemie e.V. - Polymer modified bituminous thick coatings for waterproofing</p> <p>Publisher <br />Institut Bauen und Umwelt e.V. <br />Hegelplatz 1 <br />10117 Berlin <br />Germany</p> <p>+49 (0)30 3087748- 0 <br />info@ibu-epd.com <br />www.ibu-epd.com</p> <p>Programme holder <br />Institut Bauen und Umwelt e.V. <br />Hegelplatz 1 <br />10117 Berlin <br />Germany</p> <p>+49 (0)30 3087748- 0 <br />info@ibu-epd.com <br />www.ibu-epd.com</p> <p>Author of the Life Cycle Assessment <br />Sphera Solutions GmbH <br />Hauptstraße 111- 113 <br />70771 Leinfelden-Echterdingen <br />Germany</p> <p>+49 711 341817-0 <br />info@sphera.com <br />www.sphera.com</p> <p>Owner of the Declaration <br />Deutsche Bauchemie e.V. <br />Mainzer Landstr. 55 <br />60329 Frankfurt <br />Germany</p> <p>10</p> <p>+49 (0)69 2556-1318 <br />info@deutsche-bauchemie.de <br />www.deutsche-bauchemie.de</p> <p>Environmental Product Declaration - Deutsche Bauchemie e.V. - Polymer modified bituminous thick coatings for waterproofing</p>
