INDUFLEX-PU_Leistungserklärung_GB_12.11.2025_.pdf
2 页数
144.5 KB
Download
<h1>INDUFLEX-PU_Leistungserklärung_GB_12.11.2025_.pdf</h1> <p>Declaration of Performance <br />No. 206415-2 <br />according Annex III oft he Regulation (EU) No. 305/2011 <br />amended by Commissions delegated Regulation (EU) No 574/2014</p> <p>for the product</p> <p>INDUFLEX-PU <br />1.</p> <p>Unique identification code of the product type:</p> <p>206415</p> <p>2. Idntended use :</p> <p>EN 15651-4:2012 <br />Sealant for movement joints in floors for <br />interior and exterior</p> <p>3. Manufacturer :</p> <p>Schomburg GmbH & Co. KG <br />Aquafinstrasse 2-8 <br />32760 Detmold</p> <p>4. Systems of assessment and <br />Verification of constancy of performance:</p> <p>System 4</p> <p>5. Harmonised standard:</p> <p>EN 15651-4:2012</p> <p>6. Notified body/ies:</p> <p>not relevant</p> <p>7. Declared performance/s : <br />Essential <br />characteristics</p> <p>Performance</p> <p>Reaction to fire <br />class Efl <br />Release of chemicals <br />dangerous to the <br />NPD <br />environment and health <br />Water tightness and air tightness <br />Tensile properties at <br />NF <br />maintained extension <br />Loss of volume <br />≤ 10% <br />Tear resistance <br />NF <br />Adhesion/cohesion <br />properties at maintained <br />NF, change of secant <br />extension after 28 days <br />modulus < 50% <br />water immersion <br />Adhesion/cohesion <br />NF, change of secant <br />properties at maintained <br />modulus 100 % extension</p> <p>System of assessment <br />and verification of <br />constancy of <br />performance</p> <p>System 4</p> <p>Harmonised <br />Technical <br />specification</p> <p>EN 15651:2012</p> <p>extension after 28 days <br />salt water immersion <br />Tensile properties (i.e. at <br />maintained extension in <br />cold climates) -30°C <br />Durability</p> <p>1,3 MPa <br />passed</p> <p>8. Appropriate Technical Documentation/Specification: <br />relevant</p> <p>SC-206415</p> <p>The performance of the product identified in points 1 and 2 is in conformity with the declared <br />performance in point 8. This declaration of performance is issued under the sole responsibility of the <br />manufacturer identified in point 4. <br />Signed for and on behalf of the manufacturer by:</p> <p>i.A. Michael Hölscher, <br />technician service <br />(name and function)</p> <p>Detmold, 12.11.2025</p> <p>This declaration of performance was created electronically. It is valid without manual <br />signature. <br />The current material safety data sheet and technical data sheet is downloadable under <br />http://www.schomburg-ics.de/en/Materials_safety_Data_Sheet_MSDS-datenblaetter.html <br />or <br />http://www.schomburg-ics.de/en/Technical_Data_Sheet-datenblaetter.html</p>
